summaryrefslogtreecommitdiff
path: root/arch/x86/dts
Commit message (Collapse)AuthorAgeLines
* x86: Add SPI support to quark/galileoBin Meng2015-02-06-0/+13
| | | | | | | | | | The Quark SoC contains a legacy SPI controller in the legacy bridge which is ICH7 compatible. Like Tunnel Creek and BayTrail, the BIOS control register offset in the ICH SPI driver is wrong for the Quark SoC too, unprotect_spi_flash() is added to enable the flash write. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: galileo: Add GPIO supportBin Meng2015-02-06-0/+14
| | | | | | | | | | Quark SoC has a legacy GPIO block in the legacy bridge (D0:F31), which is just the same one found in other x86 chipset. Since we programmed the GPIO register block base address, we should be able to enable the GPIO support on Intel Galileo board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Call MRC in dram_init()Bin Meng2015-02-06-0/+25
| | | | | | | | Now that we have added Quark MRC codes, call MRC in dram_init() so that DRAM can be initialized on a Quark based board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add basic Intel Galileo board supportBin Meng2015-02-06-0/+44
| | | | | | | | | New board/intel/galileo board directory with minimum codes, plus board dts, defconfig and configuration files. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add support for Intel Minnowboard MaxSimon Glass2015-02-06-2/+3332
| | | | | | | | | | | | | | This is a relatively low-cost x86 board in a small form factor. The main peripherals are uSD, USB, HDMI, Ethernet and SATA. It uses an Atom 3800 series CPU. So far only the dual core 2GB variant is supported. This uses the existing FSP support. Binary blobs are required to make this board work. The microcode update is included as a patch (all 3000 lines of it). Change-Id: I0088c47fe87cf08ae635b343d32c332269062156 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: dts: Add SPI flash MRC details for chromebook_linkSimon Glass2015-01-24-1/+14
| | | | | | | | Correct the SPI flash compatible string, add an alias and specify the position of the MRC cache, used to store SDRAM training settings for the Memory Reference Code. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Make chromebook_link the default board for corebootBin Meng2015-01-13-219/+217
| | | | | | | | | | | | | | | Change SYS_CONFIG_NAME and DEFAULT_DEVICE_TREE to chromebook_link which is currently the only real board officially supported to run U-Boot loaded by coreboot. Note the symbolic link file chromebook_link.dts is deleted and link.dts is renamed to chromebook_link.dts. To avoid multiple definition of video_hw_init, the CONFIG_VIDEO_X86 define needs to be moved to arch/x86/cpu/ivybridge/Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Update microcode early in bootSimon Glass2015-01-13-3/+0
| | | | | | | | | | | At present the normal update (which happens much later) does not work. This seems to have something to do with the 'no eviction' mode in the CAR, or at least moving the microcode update after that causes it not to work. For now, do an update early on so that it definitely works. Also refuse to continue unless the microcode update check (later in boot) is successful. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: crownbay: Add pci devices in the dts fileBin Meng2015-01-13-0/+81
| | | | | | | | | | | | | The Topcliff PCH has 4 UART devices integrated (Device 10, Funciton 1/2/3/4). Add the corresponding device nodes in the crownbay.dts per Open Firmware PCI bus bindings. Also a comment block is added for the 'stdout-path' property in the chosen node, mentioning that by default the legacy superio serial port (io addr 0x3f8) is still used on Crown Bay as the console port. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Use ePAPR defined properties for x86-uartBin Meng2015-01-13-3/+2
| | | | | | | | | Use ePAPR defined properties for x86-uart: clock-frequency and current-speed. Assign the value of clock-frequency in device tree to plat->clock of x86-uart instead of using hardcoded number. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Clean up the board dts filesBin Meng2015-01-12-24/+7
| | | | | | | | | | | | | | | | This commits cleans up the board dts files. - Correct the serial port register size to 8 - Remove the misleading status = "disabled" statement in the serial.dtsi - Move the inclusion of skeleton.dtsi from serial.dtsi to board dts files - Let the board dts file define stdout-path in the chosen node - Remove device nodes in board dts files thar are duplicated to skeleton.dtsi Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Rename coreboot.dsti to serial.dtsiBin Meng2015-01-12-2/+2
| | | | | | | | The name of coreboot.dtsi is misleading, as it actually describes the legacy serial port device node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Remove alex.dts in arch/x86/dtsBin Meng2015-01-12-25/+0
| | | | | | | No board is using alex.dts, so remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Rename coreboot-serial to x86-serialBin Meng2014-12-18-1/+1
| | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Convert microcode format to device-tree-onlySimon Glass2014-12-18-0/+7
| | | | | | | | | | To avoid having two microcode formats, adjust the build system to support obtaining the microcode from the device tree, even in the case where it must be made available before the device tree can be accessed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Integrate Tunnel Creek processor microcodeBin Meng2014-12-18-0/+368
| | | | | | | | Integrate the processor microcode version 1.05 for Tunnel Creek, CPUID device 20661h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Update the microcodeSimon Glass2014-12-18-1374/+1502
| | | | | | | | There are new microcode revisions available. Update them. Also change the format so that the first 48 bytes are not omitted from the device tree data. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Move microcode updates into a separate directorySimon Glass2014-12-18-2/+2
| | | | | | | We might end up with a few of these, so put them in their own directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add Intel Crown Bay board dts fileBin Meng2014-12-13-1/+55
| | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: dts: Add video information to the device treeSimon Glass2014-11-25-0/+13
| | | | | | This provides panel timing information needed by the video driver. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: dts: Add SATA settings for linkSimon Glass2014-11-25-0/+7
| | | | | | Add the requires settings to enable SATA on link. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: dts: Add LPC settings for linkSimon Glass2014-11-25-0/+8
| | | | | | Add some settings required to set up the LPC correctly. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: dts: Move PCI peripherals into a pci nodeSimon Glass2014-11-25-13/+15
| | | | | | | | These peripherals should not be at the top level, since they exist inside the PCI bus. We don't have a full device tree node for pci yet, but we should at least put it at the right level. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Implement SDRAM initSimon Glass2014-11-21-0/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: chromebook_link: Enable GPIO supportSimon Glass2014-11-21-0/+3
| | | | | | | Enable GPIO support and provide the required GPIO setup information to the driver. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: dts: Add microcode updates for ivybridge CPUSimon Glass2014-11-21-0/+1382
| | | | | | | | | | Add two microcode updates that are provided for this CPU. The updates have been converted to a device tree form. Note: SPDX submission has been done. If this license is approved I will convert the files to use SPDX. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add early LPC init so that serial worksSimon Glass2014-11-21-0/+1
| | | | | | | | The PCH (Platform Controller Hub) includes an LPC (Low Pin Count) device which provides a serial port. This is accessible on Chromebooks, so enable it early in the boot process. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add chromebook_link boardSimon Glass2014-11-21-0/+2
| | | | | | | | | | | | This board is a 'bare' version of the existing 'link 'board. It does not require coreboot to run, but is intended to start directly from the reset vector. This initial commit has place holders for a wide range of features. These will be added in follow-on patches and series. So far it cannot be booted as there is no ROM image produced, but it does build without errors. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: Convert coreboot serial to use driver modelSimon Glass2014-10-23-2/+2
| | | | | | | This makes use of the existing device tree node to use driver model for the serial console. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: dts: Add additional info to the serial port nodeSimon Glass2014-10-23-3/+20
| | | | | | | Add more information so that U-Boot can find the address of the serial port. Also fix the reg-shift value. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add device tree information for Chrome OS ECSimon Glass2014-10-22-0/+18
| | | | | | Add the required node describing how to find the EC on link. Signed-off-by: Simon Glass <sjg@chromium.org>
* Makefile: Support include files for .dts filesSimon Glass2014-06-20-0/+1
| | | | | | | | | | | | Linux supports this, and if we are to have compatible device tree files, U-Boot should also. Avoid giving the device tree files access to U-Boot's include/ directory. Only include/dt-bindings is accessible. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dts: generate multiple device tree blobsMasahiro Yamada2014-02-19-0/+13
| | | | | | | | | | | | | It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dts: move device tree sources to arch/$(ARCH)/dts/Masahiro Yamada2014-02-19-0/+59
| | | | | | | | | | | | | | | | | Unlike Linux Kernel, U-Boot historically had *.dts files under board/$(VENDOR)/dts/ and *.dtsi files under arch/$(ARCH)/dts/. I think arch/$(ARCH)/dts dicretory is a better location to store both *.dts and *.dtsi files. For example, before this commit, board/xilinx/dts directory had both Microblaze dts (microblaze-generic.dts) and ARM dts (zynq-*.dts), which are totally unrelated. This commit moves *.dts to arch/$(ARCH)/dts/ directories, allowing us to describe nicely mutiple DTBs generation in the next commit. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* x86: fdt: Create basic .dtsi file for corebootSimon Glass2012-12-06-0/+29
This contains just the minimum information for a coreboot-based board. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-19 00:41:54 +0000