summaryrefslogtreecommitdiff
path: root/arch/powerpc
Commit message (Collapse)AuthorAgeLines
...
* powerpc/mpc8xxx: reword max tCKmin messageYork Sun2011-05-13-3/+3
| | | | | | | | Reword "The DIMM max tCKmin is ..." to "The DDR clock is faster than the slowest DIMM(s) can support". Fixed interger type in printf as well. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: fix compatible property for the L2 cache nodeTimur Tabi2011-05-13-10/+19
| | | | | | | | | The compatible property for the L2 cache node (on 85xx systems that don't have a CPC) was using a value for the property length that did not match the actual length of the property. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* PPC405EX CHIP_21 erratumSteven A. Falco2011-05-12-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | APM errata CHIP_21 for the 405EX/EXr (from the rev 1.09 document dated 4/27/11) states that rev D processors may wake up with the wrong feature set. This patch implements the APM-proposed workaround. To enable this patch for your board, add the appropriate define for your CPU to your board header file. See kilauea.h for more information. The following variants are supported: #define CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY #define CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY #define CONFIG_SYS_4xx_CHIP_21_405EXr_NO_SECURITY #define CONFIG_SYS_4xx_CHIP_21_405EXr_SECURITY Please note that if you select the wrong define, your board will not boot, and JTAG will be required to recover. Tested on custom boards using: CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY <sfalco@harris.com> CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY <eibach@gdsys.de> Signed-off-by: Steve Falco <sfalco@harris.com> Acked-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2011-05-10-3/+1
|\
| * mpc83xx: restrict UTMI PHY configuration to 831x partsKim Phillips2011-04-04-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i.e, to those parts that have PHY_CLK_VALID bits in their USB CONTROL registers: mpc8308 WU_INT, PHY_CLK_SEL, USB_EN, WU_INT_EN, ULPI_INT_EN mpc831x PHY_CLK_VALID, WU_INT, CLKIN_SEL, PHY_CLK_SEL, UTMI_PHY_EN, PLL_RESET, REFSEL, OTG_PORT, KEEP_OTG_ON, LSF_EN, USB_EN, ULPI_INT_EN mpc834x USB_EN, ULPI_INT1_EN (MPH only), ULPI_INT0_EN mpc837x USB_EN, ULPI_INT_EN (mpc832x, mpc8360 don't have a USB_EHCI_FSL compatible controller) this prevents non-831x parts from never completing cpu_init_f(), because the (non-existent) PHY_CLK_VALID bit never gets set. Reported-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Tested-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2011-04-30-57/+518
|\ \
| * | fsl-ddr: Fix mixed-case macro namesKyle Moffett2011-04-29-9/+9
| | | | | | | | | | | | | | | Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc: eSPI and eSPI controller supportMingkai Hu2011-04-29-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Singed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Change timebase divisor to be defined per processorKumar Gala2011-04-28-5/+12
| | | | | | | | | | | | | | | | | | | | | | | | Introduce new CONFIG_SYS_FSL_TBCLK_DIV on 85xx platforms because different SoCs have different divisor amounts. All the PQ3 parts are /8, the P4080/P4080 is /16, and P2040/P3041/P5020 are /32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Implement work-around for P4080 erratum SERDES-A001Timur Tabi2011-04-28-16/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bank powerdown through RCW[SRDS_LPD_Bn] for XAUI on FM2 and SGMII on FM1 are swapped. Erratum SERDES-A001 says that if bank two is kept disabled and after bank three is enabled, then the PLL for bank three won't lock properly. The work-around is to enable and then disable bank two after bank three is enabled. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Extend SERDES9 erratum work-around to SGMII, SRIO, and AURORATimur Tabi2011-04-28-17/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | Part of the SERDES9 erratum work-around is to set some bits in the SerDes TTLCR0 register for lanes configured as XAUI, SGMII, SRIO, or AURORA. The current code does this only for XAUI, so extend it to the other protocols. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Display SERDES 8 erratum warning if banks are not disabledTimur Tabi2011-04-28-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | The work-around for P4080 erratum SERDES-8 requires all lanes of banks two and three to be disabled (powered down) in the RCW. Display a warning message if this is not the case. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Implement work-around for P4080 erratum SERDES-A005Timur Tabi2011-04-28-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | SerDes PLL bandwidth default setting is incorrect when no lanes are configured as PCI Express. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Don't set FT_FSL_PCI_SETUP if CONFIG_PCI is not setMatthew McClintock2011-04-27-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A lot of boards set FT_FSL_PCI_SETUP directly in their board code and don't check to see if CONFIG_PCI is actually defined. This will cause the board compilation to fail if CONFIG_PCI is not defined. The p1022ds board is one such example. Instead of fixing every board this patch wraps FT_FSL_PCI_SETUP around CONFIG_PCI so we can remove CONFIG_PCI and boards will still build properly. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: handle both "secX.Y" and "sec-vX.Y" propertiesKim Phillips2011-04-27-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | versioned SEC properties changed names during development, so for now search and update LIODNs for both "secX.Y" and "sec-vX.Y" based properties. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Enable ESDHC111 erratum on P2040/P3041/P5010/P5020 SoCsLei Xu2011-04-27-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | The workaround for ESDHC111 should also be applied on P2040/P3041/P5010/P5020 SoCs. Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020Roy Zang2011-04-27-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | The P2040, P3041, P5010, and P5020 all have internal USB PHYs that we need to enable for them to function. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code)Kumar Gala2011-04-27-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The P3041DS & P5020DS boards are almost identical (except for the processor in them). Additionally they are based on the P4080DS board design so we use the some board code for all 3 boards. Some ngPIXIS (FPGA) registers where reserved on P4080DS and now have meaning on P3041DS/P5020DS. We utilize some of these for SERDES clock configuration. Additionally, the P3041DS/P5020DS support NAND. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | p4080/serdes: Implement the XAUI workaround for SERDES9 erratumEmil Medve2011-04-27-0/+116
| | | | | | | | | | | | | | | | | | Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: fsl_corenet_serdes code reworkEmil Medve2011-04-27-3/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rework and add some new APIs to the fsl_corenet_serdes code for use by erratum and drivers. * Rename serdes_get_bank() to serdes_get_bank_by_lane() * Add serdes_get_first_lane returns which SERDES lane is used by device Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Add device tree fixup for bman portalHaiying Wang2011-04-27-1/+33
| | | | | | | | | | | | | | | | | | | | | Fix fdt bportal to pass the bman revision number to kernel via device tree. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Add support for 2nd USB controller on p1_p2_rdbRamneek Mehresh2011-04-27-0/+1
| | | | | | | | | | | | | | | | | | Second USB controller only works for SPI and SD boot because of pin muxing Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
| * | powerpc/85xx: Added PMUXCR1 and PMUXCR2 defines for P1010/P1014 SoCDipen Dudhat2011-04-27-0/+71
| | | | | | | | | | | | | | | Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Change CS timing params before changing CS properties on IFCDipen Dudhat2011-04-27-16/+15
| | | | | | | | | | | | | | | | | | | | | | | | To make sure that machine change operation work successfully, change timing parameters first before changing machine for chip select on IFC. Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Handle most LDSCRIPT setting centrallyScott Wood2011-04-30-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, some linker scripts are found by common code in config.mk. Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is sometimes in arch config.mk and sometimes in board config.mk. Some are found using an arch-specific rule for looking in CPUDIR, etc. Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds. Replace all of this -- except for a handful of boards that are actually selecting a linker script in a unique way -- with centralized ldscript finding. If board code specifies LDSCRIPT, that will be used. Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used. If neither of these are specified, then the central config.mk will check for the existence of the following, in order: $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds $(TOPDIR)/$(CPUDIR)/u-boot.lds Some boards (sc3, cm5200, munices) provided their own u-boot.lds that were dead code, because they were overridden by a CPUDIR u-boot.lds under the old powerpc rules. These boards' own u-boot.lds have bitrotted and no longer work -- these lds files have been removed. Signed-off-by: Scott Wood <scottwood@freescale.com> Tested-by: Graeme Russ <graeme.russ@gmail.com>
* | | mpc832x: add support for the mpc8321 based suvd3 boardHeiko Schocher2011-04-30-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - serial console on UART1 - Ethernet RMII over UCC4 - PHY SMSC LAN8700 - 64MB Flash - 128 MB DDR2 RAM - I2C - bootcount This board is similiar to the kmeter1 (8360) board, so common config options are extracted into the include/configs/km83xx-common.h file. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Kim Phillips <kim.phillips@freescale.com> cc: Kim Phillips <kim.phillips@freescale.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com>
* | | powerpc: use 'video-mode' environment variable to configure DIUTimur Tabi2011-04-28-13/+3
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the 'video-mode' environment variable (for Freescale chips that have a DIU display controller) to designate the full video configuration. Previously, the DIU driver used the 'monitor' variable, and it was used only to determine the output video port. The old definition of the "monitor" environment variable only determines which video port to use for output. This variable was set to a number (0, 1, or sometimes 2) to specify a DVI, LVDS, or Dual-LVDS port. The resolution was hard-coded into board-specific code. The Linux command-line arguments needed to be hard-coded to the proper video definition string. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | powerpc: fix implementation of out_8 to match the other out_XX functionsTimur Tabi2011-04-28-1/+4
| | | | | | | | Signed-off-by: Timur Tabi <timur@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-04-27-0/+4
|\ \
| * | Don't grab memory for LCD if FB address is definedMinkyu Kang2011-04-27-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If FB address is defined specific address then don't grab memory for LCD Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com>
* | | Respect memreserve regions specified in the device treeGrant Likely2011-04-25-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | If a regions is reserved in the fdt, then it should not be used. Add the memreserve regions to the lmb so that u-boot doesn't use them to store the initrd. Signed-off-by: Grant Likely <grant.likely@linaro.org>
* | | Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZGrant Likely2011-04-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The previous patch makes u-boot use the full accessible size of ram as the default boot mapped size if CONFIG_SYS_BOOTMAPSZ is not defined, which means boot_relocate_fdt() can be changed to depend solely on CONFIG_OF_LIBFDT. Signed-off-by: Grant Likely <grant.likely@linaro.org>
* | | Default to bootm_size() when CONFIG_SYS_BOOTMAPSZ is not definedGrant Likely2011-04-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a function getenv_bootm_mapsize() for obtaining the size of the early mapped region accessible by the kernel during early boot. It defaults to CONFIG_SYS_BOOTMAPSZ, or if not defined, defaults to getenv_bootm_size(), which in turn defaults to the size of RAM. getenv_bootm_mapsize() can also be overridden with a "bootm_mapsize" environmental variable. Signed-off-by: Grant Likely <grant.likely@linaro.org>
* | | Stop passing around bootmem_base value.Grant Likely2011-04-25-6/+3
|/ / | | | | | | | | | | | | | | | | | | For the calls to boot_relocate_fdt(), boot_get_cmdline(), and boot_get_kbd(), the value of bootmem_base is always obtained by calling getenv_bootm_low(). Since the value always comes from the same source, the calling signature for those functions can be simplified by making them call getenv_bootm_low() directly. Signed-off-by: Grant Likely <grant.likely@linaro.org>
* | Merge branch 'phylib' of git://git.denx.de/u-boot-mmcWolfgang Denk2011-04-20-35/+24
|\ \
| * | fsl: Change fsl_phy_enet_if to phy_interface_tAndy Fleming2011-04-20-35/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fsl_phy_enet_if enum was, essentially, the phy_interface_t enum. This meant that drivers which used fsl_phy_enet_if to deal with PHY interfaces would have to convert between the two (or we would have to have them mirror each other, and deal with the ensuing maintenance headache). Instead, we switch all clients of fsl_phy_enet_if over to phy_interface_t, which should become the standard, anyway. Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Detlev Zundel <dzu@denx.de>
| * | tsec: Convert tsec to use PHY LibAndy Fleming2011-04-20-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts tsec to use the new PHY Lib. All of the old PHY support is ripped out. The old MDIO driver is split off, and placed in fsl_mdio.c. The initialization is modified to initialize the MDIO driver as well. The powerpc config file is modified to configure PHYLIB if TSEC_ENET is configured. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Detlev Zundel <dzu@denx.de>
* | | Revert "PowerPC: Add support for -msingle-pic-base"Wolfgang Denk2011-04-20-127/+12
|/ / | | | | | | | | | | | | This reverts commit 39768f7715ed637ef02f49fc7de664cc1aaf14b3. Reson: it breaks a number of boards with embedded environment as the code size grows in some places.
* | Make STANDALONE_LOAD_ADDR configurable per boardWolfgang Denk2011-04-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Rename STANDALONE_LOAD_ADDR into CONFIG_STANDALONE_LOAD_ADDR and allow that the architecture-specific default value gets overwritten by defining the value in the board header file. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Tsi Chung Liew <tsi-chung.liew@freescale.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | PowerPC: Add support for -msingle-pic-baseJoakim Tjernlund2011-04-11-12/+127
| | | | | | | | | | | | | | | | | | | | | | | | | | -msingle-pic-base is a new gcc option for ppc and it reduces the size of my u-boot with 6-8 KB. While at it, add -fno-jump-tables too to save a few more bytes. -msingle-pic-base will be in gcc 4.6, however backported patches are available at http://bugs.gentoo.org/show_bug.cgi?id=347281 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* | PowerPC: Move -fPIC flag to common placeJoakim Tjernlund2011-04-11-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The -fPIC flag belongs with -mrelocatable, move it there. Also change -fPIC to -fpic as this produces smaller binaries. However, currently -mrelocatable promotes -fpic to -fPIC, a fix for this is in upcoming gcc 4.6 or you can apply this small patch to gcc: diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h index 8da8410..e4b8280 100644 --- a/gcc/config/rs6000/sysv4.h +++ b/gcc/config/rs6000/sysv4.h @@ -227,7 +227,8 @@ do { \ } \ \ else if (TARGET_RELOCATABLE) \ - flag_pic = 2; \ + if (!flag_pic) \ + flag_pic = 2; \ } while (0) #ifndef RS6000_BI_ARCH -- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* | powerpc/85xx: Removed clearing of L2-as-SRAMFabian Cenedese2011-04-10-7/+0
| | | | | | | | | | | | | | | | Removed clearing of L2 cache as SRAM as it is not necessary without ECC. This also speeds up the booting process. Signed-off-by: Fabian Cenedese <cenedese@indel.ch> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | fsl_esdhc: Deal with watermark level register related changesPriyanka Jain2011-04-10-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | P1010 and P1014 has v2.3 version of FSL eSDHC controller in which watermark level register description has been changed: 9-15 bits represent WR_WML[0:6], Max value = 128 represented by 0x00 25-31 bits represent RD_WML[0:6], Max value = 128 represented by 0x00 Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Poonam Aggrwal <Poonam.Aggrwal@freescale.com> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: Add PBL boot from SPI flash support on P4080DSShaohui Xie2011-04-10-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | PBL(pre-boot loader): SPI flash used as RCW(Reset Configuration Word) and PBI(pre-boot initialization) source, CPC(CoreNet Platform Cache) used as 1M SRAM where PBL will copy whole U-BOOT image to, U-boot can boot from CPC after PBL completes RCW and PBI phases. Signed-off-by: Chunhe Lan <b25806@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: Add support usb2/etsec and tdm/audio pin multiplex on P1022DSJiang Yutang2011-04-10-0/+10
| | | | | | | | | | | | | | | | | | | | | | For soc which have pin multiplex relation, some of them can't enable simultaneously. This patch add environment var 'hwconfig' content defination for them. you can enable some one function by setting environment var 'hwconfig' content and reset board. Detail setting please refer doc/README.p1022ds Signed-off-by: Jiang Yutang <b14898@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | p4080ds: remove rev1-specific code for the SERDES8 erratumTimur Tabi2011-04-10-59/+47
| | | | | | | | | | | | | | | | Remove the SERDES8 erratum work-around code that only applied to P4080 rev1, which is not supported by this version of U-Boot. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: rename NAND prefixes to CONFIG_SYSMatthew McClintock2011-04-08-4/+4
| | | | | | | | | | | | | | | | | | | | renaming 85xx define CONFIG_NAND_OR_PRELIM to CONFIG_SYS_NAND_OR_PRELIM and CONFIG_NAND_BR_PRELIM to CONFIG_SYS_NAND_BR_PRELIM to use the more appropriate CONFIG_SYS prefix as well as be consistent with 83xx. Signed-off-by: Matthew McClintock <msm@freescale.com> cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: Add some defines & registers in immap_85xx.hZhao Chenhui2011-04-05-1/+6
| | | | | | | | | | | | | | | | | | * Added SDHCDCR register to GUR struct * Added SDHCDCR_CD_INV define related to SDHCDCR * Added Pin Muxing define related to TDM on P102x Signed-off-by: Zhao Chenhui <b35336@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: Add P1021 specific QE and UEC supportHaiying Wang2011-04-05-10/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | P1021 has some QE pins which need to be set in pmuxcr register before using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to be released after MII access because QE12 pin is muxed with LBCTL signal. Also added relevant QE support defines unique to P1021. The P1021 QE is shared on P1012, P1016, and P1025. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: don't init SDRAM when CONFIG_SYS_RAMBOOTZhao Chenhui2011-04-05-0/+12
| | | | | | | | | | | | Signed-off-by: Zhao Chenhui <b35336@freescale.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.1 at 2024-11-10 06:47:07 +0000