summaryrefslogtreecommitdiff
path: root/arch/powerpc/include
Commit message (Collapse)AuthorAgeLines
* SPDX-License-Identifier: convert PIBS licensed filesWolfgang Denk2013-08-19-112/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adapts the files that were derived from PIBS (PowerPC Initialization and Boot Software) codeto using SPDX License Identifiers. So far, SPDX has not assigned an official License ID for the PIBS license yet, so this should be considered preliminary. Note that the following files contained incorrect license information: arch/powerpc/cpu/ppc4xx/4xx_uart.c arch/powerpc/cpu/ppc4xx/start.S arch/powerpc/include/asm/ppc440.h These files included, in addition to the GPL-2.0 / ibm-pibs dual license as inherited from PIBS, a GPL-2.0+ license header which was obviously incorrect. This has been removed. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de> Conflicts: Licenses/README Acked-by: Stefan Roese <sr@denx.de>
* fsl/usb: Move USB internal phy definitions to fsl_usb.hramneek mehresh2013-08-14-48/+0
| | | | | | | | | fsl_usb.h file created to share data bewteen usb platform code and usb ip driver. Internal phy structure definitions moved to this file Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx:Avoid hardcoded init for serdes block 1 & 2Prabhakar Kushwaha2013-08-14-0/+4
| | | | | | | | | | It is not necessary for all processor to have serdes block 1 & 2. They may have only one serdes block. So, put serdes block 1 & 2 related code under defines Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* powerpc/85xx: Add C29x SoC supportMingkai Hu2013-08-09-0/+39
| | | | | | | | | | | | | | | The Freescale C29x family is a high performance crypto co-processor. It combines a single e500v2 core with necessary SEC engine. There're three SoC types(C291, C292, C293) with the following features: - 512K L2 Cache/SRAM and 512 KB platform SRAM - DDR3/DDR3L 32bit DDR controller - One PCI express (x1, x2, x4) Gen 2.0 Controller - Trust Architecture 2.0 - SEC6.0 engine Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com>
* powerpc/pcie: remove PCIe version 3.x define for B4860 and B4420Zang Roy-R619112013-08-09-1/+0
| | | | | | B4860 and B4420 has PCIe version 2.4 IP instead of 3.x Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
* powerpc/pcie: add PCIe version 3.x supportZang Roy-R619112013-08-09-2/+34
| | | | | | | | | | | | | | | | | | | | | | | | | T4240 PCIe IP is version 3.0 and has some update comparing previous QorIQ products. 1. Move Freescale specific register define to arch/powerpc/include/asm/fsl_pci.h and update the register offset define for T4240. 2. add the status/control register define use status/control register to judge the link status 3. The original code uses 'Programming Interface' field to judge if PCIE is EP or RC mode, however, T4240 does not support this functionality. According to PCIE specification, 'Header Type' offset 0x0e is used to indicate header type, so for PCIE controller, the patch changes code to use 'Header Type' field to identify if the PCIE is RC or EP mode. This patch fixes the PCIe card link up issue on T4240QDS. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/asm: Move function declaration of 'serdes_get_prtcl' to fsl_serdes.hShaveta Leekha2013-08-09-0/+1
| | | | | | | It allows files not in the same path to use this function as required by B4 board file Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
* powerpc/mpc85xx: Add defines for serdes RSTCTL registerShaveta Leekha2013-08-09-1/+3
| | | | | | | | Also change the define name SRDS_RSTCTL_SDPD to SRDS_RSTCTL_SDEN, which stands for SerDes enable as mentioned in SerDes module guide Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
* board/bsc9132qds: Configure DSP DDR controllerPriyanka Jain2013-08-09-0/+6
| | | | | | | | | | | | | | BSC9132 SoC has two separate DDR controllers for PowerPC side and DSP side DDR. They are mapped to PowerPC and DSP CCSR space respectively. BSC9132QDS has two on-board MC34716EP DDR3 memory one connected to PowerPC and other to DSP side controller. Configure DSP DDR controller similar to PowerPC side DDR controller as memories are exactly similar. Signed-off-by: Manish Jaggi <manish.jaggi@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* board/bsc9132qds: Add DSP side tlb and lawsPriyanka Jain2013-08-09-1/+9
| | | | | | | | | | | | | | | BSC9132QDS is a Freescale Reference Design Board for BSC9132 SoC which is a integrated device that contains two powerpc e500v2 cores and two DSP starcores. To support DSP starcore -Creating LAW and TLB for DSP-CCSR space. -Creating LAW for DSP-core subsystem M2 and M3 memory -Creating LAW for 1GB DDR which is connected exclusively to DSP-cores Signed-off-by: Manish Jaggi <manish.jaggi@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Workaround for A-005812York Sun2013-08-09-0/+3
| | | | | | | | Erratum A-005812 Incorrect reservation clearing in Write Shadow mode can result in invalid atomic operations. For u-boot, this erratum only impacts SoCs running in write shadow mode. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/mpc8xxx: Add memory reset controlYork Sun2013-08-09-1/+23
| | | | | | | | | JEDEC spec requires the clocks to be stable before deasserting reset signal for RDIMMs. Clocks start when any chip select is enabled and clock control register is set. This patch also adds the interface to toggle memory reset signal if needed by the boards. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/mpc8xxx: Add x4 DDR device supportYork Sun2013-08-09-0/+2
| | | | | | | | | On selected platforms, x4 DDR devices can be supported. Using x4 devices may lower the performance, but generally they are available for higher density. Tested on MT36JSF2G72PZ-1G9E1 RDIMM. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/corenet: Move CONFIG_FSL_CORENET out of board header fileYork Sun2013-08-09-0/+5
| | | | | | | Move CONFIG_FSL_CORENET define to config_mpc85xx.h. It is not board specific feature and belongs to SoC header. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/t4: Correct LIODN assignment for SRIOLiu Gang2013-08-09-0/+1
| | | | | | | For T4 platform, the SRIO LIODN registers are in SRIO address space and not in GUTs. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
* powerpc/b4860: Correct LIODN assignment for SRIOLiu Gang2013-08-09-0/+1
| | | | | | | For B4, the SRIO LIODN registers are in SRIO address space and not in GUTs. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
* powerpc/srio: Update the SRIO LIODN registers and ID table macroLiu Gang2013-08-09-0/+23
| | | | | | | | | | | | For some PowerPC platforms, LIODN registers for SRIO ports are in SRIO register address space. So the ccsr_rio structure should be updated for those LIODN registers. In addition, add a new macro "SET_SRIO_LIODN_BASE" to create the SRIO LIODN ID table based on the SRIO LIODN register address. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2013-07-24-18/+0
|\ | | | | | | | | | | | | | | | | | | | | The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
| * i2c, ppc4xx_i2c: switch to new multibus/multiadapter supportDirk Eibach2013-07-23-18/+0
| | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Heiko Schocher <hs@denx.de> Cc: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
* | Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-811/+57
|/ | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* powerpc/mpc85xx: work around erratum A-006593Scott Wood2013-06-20-0/+2
| | | | | | | | | | | | Erratum A-006593 is "Atomic store may report failure but still allow the store data to be visible". The workaround is: "Set CoreNet Platform Cache register CPCHDBCR0 bit 21 to 1'b1. This may have a small impact on synthetic write bandwidth benchmarks but should have a negligible impact on real code." Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* fsl_ifc: add support for different IFC bank countMingkai Hu2013-06-20-31/+68
| | | | | | | | | | | | Calculate reserved fields according to IFC bank count 1. Move csor_ext register behind csor register and fix res offset 2. Move ifc bank count to config_mpc85xx.h to support 8 bank count 3. Guard fsl_ifc.h with CONFIG_FSL_IFC macro to eliminate the compile error on some devices that does not have IFC controller. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* powerpc/t4qds: Slave module for boot from SRIO and PCIELiu Gang2013-06-20-0/+1
| | | | | | | | | | | | | | | | | | | | | When a T4 board boots from SRIO or PCIE, it needs to finish these processes: 1. Set all the cores in holdoff status. 2. Set the boot location to one PCIE or SRIO interface by RCW. 3. Set a specific TLB entry for the boot process. 4. Set a LAW entry with the TargetID of one PCIE or SRIO for the boot. 5. Set a specific TLB entry in order to fetch ucode and ENV from master. 6. Set a LAW entry with the TargetID one of the PCIE ports for ucode and ENV. 7. Slave's u-boot image should be generated specifically by make xxxx_SRIO_PCIE_BOOT_config. This will set SYS_TEXT_BASE=0xFFF80000 and other configurations. For more information about the feature of Boot from SRIO/PCIE, please refer to the document doc/README.srio-pcie-boot-corenet. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* powerpc/b4860qds: Slave module for boot from SRIO and PCIELiu Gang2013-06-20-0/+1
| | | | | | | | | | | | | | | | | | | | | | When a b4860qds board boots from SRIO or PCIE, it needs to finish these processes: 1. Set all the cores in holdoff status. 2. Set the boot location to one PCIE or SRIO interface by RCW. 3. Set a specific TLB entry for the boot process. 4. Set a LAW entry with the TargetID of one PCIE or SRIO for the boot. 5. Set a specific TLB entry in order to fetch ucode and ENV from master. 6. Set a LAW entry with the TargetID one of the PCIE ports for ucode and ENV. 7. Slave's u-boot image should be generated specifically by make xxxx_SRIO_PCIE_BOOT_config. This will set SYS_TEXT_BASE=0xFFF80000 and other configurations. For more information about the feature of Boot from SRIO/PCIE, please refer to the document doc/README.srio-pcie-boot-corenet. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* powerpc/boot: Change the macro of Boot from SRIO and PCIE master moduleLiu Gang2013-06-20-4/+0
| | | | | | | | | | | | | | | | | Currently, the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" can enable the master module of Boot from SRIO and PCIE on a platform. But this is not a silicon feature, it's just a specific booting mode based on the SRIO and PCIE interfaces. So it's inappropriate to put the macro into the file arch/powerpc/include/asm/config_mpc85xx.h. Change the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" to "CONFIG_SRIO_PCIE_BOOT_MASTER", remove them from arch/powerpc/include/asm/config_mpc85xx.h file, and add those macros in configuration header file of each board which can support the master module of Boot from SRIO and PCIE. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* 85xx: Change case of MPC85XX_PORBMSR_ROMLOC_SHIFTAndy Fleming2013-06-20-1/+1
| | | | | | | All the other constants use lowercase 'x' in "MPC85xx", so we duplicate that here. Signed-off-by: Andy Fleming <afleming@freescale.com>
* powerpc/BSC9132: Add IFC bank countYork Sun2013-06-20-0/+1
| | | | | | | BSC9132 has 3 IFC banks. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* board/bsc9131rdb: Add DSP side tlb and lawsPriyanka Jain2013-06-20-0/+7
| | | | | | | | | | | | | | | BSC9131RDB is a Freescale Reference Design Board for BSC9131 SoC which is a integrated device that contains one powerpc e500v2 core and one DSP starcore. To support DSP starcore -Creating LAW and TLB for DSP-CCSR space. -Creating LAW for DSP-core subsystem M2 memory Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7Scott Wood2013-06-11-8/+18
| | | | | | | | | | | C99's strict aliasing rules are insane to use in low-level code such as a bootloader, but as Wolfgang has rejected -fno-strict-aliasing in the past, add a union so that 16-bit accesses can be performed. Compile-tested only. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-30-323/+162
|\ | | | | | | | | | | Conflicts: common/cmd_fpga.c drivers/usb/host/ohci-at91.c
| * SECURE BOOT - Removed deletion of TLB entries codeRuchika Gupta2013-05-24-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Boot ROM code creates TLB entries for 3.5G space before entering the u-boot. Earlier we were deleting these entries after early initialization of CPU. In recent past, code has been added to invalidate all these entries before relocation of u-boot code. So this code to delete TLB entries after CPU initialization is no longer required. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Acked-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * powerpc/b4860qds: Add LAW Target ID and Create LAW entry for MapleShaveta Leekha2013-05-24-0/+2
| | | | | | | | | | Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * powerpc/B4: Merge B4420 and B4860 in config_mpc85xx.hPoonam Aggrwal2013-05-24-23/+11
| | | | | | | | | | | | | | | | | | | | | | | | B4420 is a subset of B4860. Merge them in config_mpc85xx.h to simplify the defines. - Removed #define CONFIG_SYS_FSL_NUM_CLUSTERS as this is used nowhere. - defined CONFIG_SYS_NUM_FM1_10GEC to 0 for B4420 as it does not have 10G. Also move CONFIG_E6500 out of B4860QDSds.h into config_mpc85xx.h. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * powerpc/chassis2: Change core numbering schemeYork Sun2013-05-24-16/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To align with chassis generation 2 spec, all cores are numbered in sequence. The cores may reside across multiple clusters. Each cluster has zero to four cores. The first available core is numbered as core 0. The second available core is numbered as core 1 and so on. Core clocks are generated by each clusters. To identify the cluster of each core, topology registers are examined. Cluster clock registers are reorganized to be easily indexed. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * powerpc/mpc8xxx: Add T1040 and variant SoCsYork Sun2013-05-24-0/+45
| | | | | | | | | | | | | | | | | | T1040 and variants have e5500 cores and are compliant to QorIQ Chassis Generation 2. The major difference between T1040 and its variants is the number of cores and the number of L2 switch ports. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * powerpc/T4160: Merge T4160 and T4240 in config_mpc85xx.hYork Sun2013-05-24-32/+10
| | | | | | | | | | | | | | | | T4160 is a subset of T4240. Merge them in config_mpc85xx.h to simplify the defines. Also move CONFIG_E6500 out of t4qds.h into config_mpc85xx.h. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * Add e6500 L2 replacement policy selectionJames Yang2013-05-24-0/+9
| | | | | | | | | | | | | | This is compile-time config. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxTom Rini2013-05-15-15/+98
| |\
| | * powerpc/85xx: fix build error introduced by serdes_get_prtclShengzhou Liu2013-05-14-1/+0
| | | | | | | | | | | | | | | | | | | | | Removed unused declare serdes_get_prtcl() which was no longer needed. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * t4240qds/eth: fixup ethernet for t4240qdsShengzhou Liu2013-05-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1, Implemented board_ft_fman_fixup_port() to fix port for kernel. 2, Implemented fdt_fixup_board_enet() to fix node status of different slots and interfaces. 3, Adding detection of slot present for XGMII interface. 4, There is no PHY for XFI, so removed related phy address settings. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * powerpc/mpc85xx: Add T4160 SoCYork Sun2013-05-14-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T4160 SoC is low power version of T4240. The T4160 combines eight dual threaded Power Architecture e6500 cores and two memory complexes (CoreNet platform cache and DDR3 memory controller) with the same high-performance datapath acceleration, networking, and peripheral bus interfaces. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * T4/USB: Add USB 2.0 UTMI dual phy supportRoy Zang2013-05-14-2/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T4240 internal UTMI phy is different comparing to previous UTMI PHY in P3041. This patch adds USB 2.0 UTMI Dual PHY new memory map and enable it for T4240. The phy timing is very sensitive and moving the phy enable code to cpu_init.c will not work. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * powerpc/mpc85xx: Update corenet global utility block registersYork Sun2013-05-14-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | Fix ccsr_gur for corenet platform. Remove non-exist registers. Add fuse status register. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * powerpc/mpc85xx: Add definitions for HDBCR registersAndy Fleming2013-05-14-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Makes it a bit easier to see if we've properly set them. While we're in there, modify the accesses to HDBCR0 and HDBCR1 to actually use those definitions. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | Power: remove support for Freescale MPC8220Wolfgang Denk2013-05-15-260/+0
| |/ | | | | | | | | | | | | | | | | | | The Freescale MPC8220 Power Architecture processors have long reached EOL; Freescale does not even list these any more on their web site. Remove the code to avoid wasting maitaining efforts on dead stuff. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Andy Fleming <afleming@gmail.com>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-11-0/+2
|\ \ | |/ |/| | | | | | | Conflicts: drivers/mtd/nand/mxc_nand_spl.c include/configs/m28evk.h
| * Add fsl_iim driverBenoît Thébaudeau2013-04-28-0/+2
| | | | | | | | | | | | Add a fsl_iim driver common to i.MX and MPC. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | powerpc/mpc85xx: Extend workaround for erratum DDR_A003 to other SoCsYork Sun2013-05-02-0/+3
| | | | | | | | | | | | | | Erratum DDR_A003 applies to P5020, P3041, P4080, P3060, P2041, P5040. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | powerpc/mpc85xx:IFC Errata A003399 is not valid for BSC913xPrabhakar Kushwaha2013-05-02-2/+0
| | | | | | | | | | | | | | | | As per Errata list of BSC9131 and BSC9132, IFC Errata A003399 is no more valid. So donot compile its workaround. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | powerpc/85xx: Add workaround for errata USB-14 (enable on P204x/P3041/P50x0)Xulei2013-05-02-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On P204x/P304x/P50x0 Rev1.0, USB transmit will result in false internal multi-bit ECC errors, which has impact on performance, so software should disable all ECC reporting from USB1 and USB2. In formal release document, the errata number should be USB14 instead of USB138. Signed-off-by: xulei <Lei.Xu@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: xulei <B33228@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
generated by cgit v1.1 at 2024-11-05 03:20:35 +0000