summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu
Commit message (Collapse)AuthorAgeLines
* Move console definitions into a new console.h fileSimon Glass2015-11-19-0/+3
| | | | | | | | The console includes a global variable and several functions that are only used by a small subset of U-Boot files. Before adding more functions, move the definitions into their own header file. Signed-off-by: Simon Glass <sjg@chromium.org>
* mpc83xx: Add strider boardDirk Eibach2015-11-12-0/+3
| | | | | | | | | | | | | | The gdsys strider board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x 10/100 Mbit/s Ethernet (optional) - Lattice ECP3 FPGA connected via eLBC Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> [trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now] Signed-off-by: Tom Rini <trini@konsulko.com>
* powerpc: Finish updating u-boot*lds scripts for newer binutilsTom Rini2015-11-10-8/+0
| | | | | | | | In 522b021 we dropped 'PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4)' lines in the mpc85xx linker scripts as this is not required and breaks newer binutils. This commit cleans up the rest of the powerpc linker scripts. Signed-off-by: Tom Rini <trini@konsulko.com>
* Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-10-3/+5
| | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* mpc85xx/u-boot*.lds: remove _GLOBAL_OFFSET_TABLE_ definitionZhenhua Luo2015-11-09-4/+0
| | | | | | | | | | | | | | | | | | | | | In binutils-2.25, the _GLOBAL_OFFSET_TABLE_ symbols defined by PROVIDE in u-boot.lds overrides the linker built-in symbols (https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff; h=b893397a4b1316610f49819344817715e4305de9), so the linker is treating _GLOBAL_OFFSET_TABLE_ as a definition into the .reloc section. To align with the change of binutils-2.25, the _GLOBAL_OFFSET_TABLE_ symbol should not be defined in sections, and the symbols in linker generated .got section should be used(https://sourceware.org/ml/binutils/2008-09/ msg00122.html) Fixed the following build errors with binutils-2.25: | powerpc-poky-linux-gnuspe-ld.bfd: _GLOBAL_OFFSET_TABLE_ not defined in linker created .got Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* powerpc: Remove __ilog2_u64 and ffs4 from bitopsFabio Estevam2015-11-05-4/+8
| | | | | | | | | | | | | Remove __ilog2_u64 and ffs4 from powerpc bitops to align with the kernel implementation. Use the generic __ffs64 instead of a custom powerpc implementation. Cc: York Sun <yorksun@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
* video: Drop DEV_EXT_VIDEO flagBin Meng2015-11-05-1/+0
| | | | | | DEV_EXT_VIDEO does not have any actual meaning, hence drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* mpc85xx: Add support for the Varisys Cyrus boardAndy Fleming2015-11-04-0/+4
| | | | | | | | | | | This board runs a P5020 or P5040 chip, and utilizes an EEPROM with similar formatting to the Freescale P5020DS. Large amounts of this code were developed by Adrian Cox <adrian at humboldt dot co dot uk> Signed-off-by: Andy Fleming <afleming@gmail.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/t2081: enable parsing DDR ratio for T2081 rev1.1Shengzhou Liu2015-11-02-1/+2
| | | | | | | | T2081 rev 1.1 changes MEM_PLL_RAT in RCW which requires new parsing for PLL ratio. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdmZhao Qiang2015-11-02-0/+11
| | | | | | | | | qe-tdm is muxed with diu, if hwconfig setted as qe-tdm, assign muxed pins to qe-tdm, then delete diu node from device tree. Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* arch/powerpc/cpu/ppc4xx/Kconfig: Finish removing boardsTom Rini2015-10-27-16/+0
| | | | | | | My patches to drop various ppc4xx boards were not build tested and omitted the Kconfig parts. Signed-off-by: Tom Rini <trini@konsulko.com>
* ppc4xx: Remove lcd4_lwmon5 supportStefan Roese2015-10-11-1/+0
| | | | | | | This platform has not gone into production. So lets remove it. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* Revert "powerpc: ppc4xx: remove lwmon5 support"Stefan Roese2015-10-11-0/+5
| | | | | | | | | | This reverts commit 8fe11b8901a31d11990488c82bc23612589d57be. I'll add support to lwmon5 in the next patch and will remove support for the broken lcd4_lwmon5 as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: mpc85xx: remove stxgp3, stxssa supportMasahiro Yamada2015-09-02-8/+0
| | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Dan Malek <dan@embeddedalley.com>
* powerpc: mpc5xx: remove cmi_mpc5xx supportMasahiro Yamada2015-09-02-4/+0
| | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: ppc4xx: remove zeus supportMasahiro Yamada2015-09-02-19/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove sbc405 supportMasahiro Yamada2015-09-02-4/+0
| | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: ppc4xx: remove pcs440ep supportMasahiro Yamada2015-09-02-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove p3p440 supportMasahiro Yamada2015-09-02-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove lwmon5 supportMasahiro Yamada2015-09-02-5/+0
| | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Remove CONFIG_LWMON5 references. (Also, remove undefined CONFIG_WD_MAX_RATE while I am here.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove csb272, csb472 supportMasahiro Yamada2015-09-02-8/+0
| | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tolunay Orkun <torkun@nextio.com>
* powerpc: ppc4xx: remove alpr supportMasahiro Yamada2015-09-02-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* net/fman: Support both new and legacy FMan CompatiblesIgal Liberman2015-09-01-18/+72
| | | | | | | | | | | | | | Recently the FMan Port and MAC compatibles were changed. This patch aligns the FMan Port and MAC compatibles to the new FMan device tree binding document. The FMan device tree binding document can be found in the Linux kernel: ./Documentation/devicetree/bindings/powerpc/fsl/fman.txt This patch doesn't affect legacy compatibles support. Signed-off-by: Igal Liberman <igal.liberman@freescale.com> Tested-by: Xing Lei <xing.lei@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc: e6500: Lock/unlock L2 cache instead of L1 as init_ramYork Sun2015-09-01-1/+9
| | | | | | | | | MPC85xx has been using locked L1 cache as init_ram. L1 cache is a write through cache on E6500. L2 cache is enabled to to hold the data. This patch locks/unlocks L2 cache to ensure no data cast out from L2 cache. Signed-off-by: York Sun <yorksun@freescale.com> Reported-by: Jeffery Zhu <Jefferry.Zhu@freescale.com>
* powerpc/t4240: update serdes tableShaohui Xie2015-07-31-55/+48
| | | | | | | | | | Serdes Lanes availability on T4160 and T4080 are same, which serdes 2 & 3 support 8 Lanes, but serdes 1 & 4 support only 4 Lanes E/F/G/H, Lanes A/B/C/D are not available, updated the serdes table accordingly with some minor fix. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041Aneesh Bansal2015-07-31-0/+11
| | | | | | | | | | | | | | | | | | | Secure Boot Target is added for NAND for P3041. For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC. In case of secure boot, this default address maps to Boot ROM. The Boot ROM code requires that the bootloader(U-boot) must lie in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF. In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is configured as SRAM. U-Boot binary will be located on SRAM configured at address 0xBFF00000. In the U-Boot code, TLB entries are created to map the virtual address 0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t1024: update fman liodn for mac1Shengzhou Liu2015-07-28-2/+1
| | | | | | | | | | | | MAC1 acts as 1G/10G dual-role MAC on T1024. We introduce macro SET_FMAN_RX_10G_TYPE2_LIODN for 10G MACs which have same Port ID and same offset of address with 1G MAC. Update it to match with the setting of fman in t1024 device tree, otherwise there is no 'fsl,liodn' in /proc/device-tree/soc@ffe000000/fman@400000/port@88000/ Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* arch: Make board selection choices optionalJoe Hershberger2015-05-12-0/+9
| | | | | | | | | | | | By making the board selections optional, every defconfig will include the board selection when running savedefconfig so if a new board is added to the top of the list of choices the former top's defconfig will still be correct. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
* ppc4xx: Remove sc3 boardStefan Roese2015-05-10-5/+1
| | | | | | | | | | | | | | | | As this board seems to be unmaintained for quite some time, and its not moved to the generic board ingrastructure, lets remove it. This will also enable us to remove the CONFIG_AUTOBOOT_DELAY_STR2 and CONFIG_AUTOBOOT_STOP_STR2 macros, as this sc3 board is the only one using one of this macros. A removal patch will follow soon. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Juergen Beisert <jbeisert@eurodsn.de> Acked-by: Heiko Schocher <hs@denx.de>
* powerpc/mpc85xx: Add board support for ucp1020Oleksandr G Zhadan2015-05-04-0/+4
| | | | | | | | | | New QorIQ p1020 based board support from Arcturus Networks Inc. http://www.arcturusnetworks.com/products/ucp1020/ Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com> Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com> [York Sun: remove patman tags from commit message] Reviewed-by: York Sun <yorksun@freescale.com>
* mmc: fsl_esdhc: Add peripheral clock supportYangbo Lu2015-05-04-1/+48
| | | | | | | | | | | | The SD clock could be generated by platform clock or peripheral clock for some platforms. This patch adds peripheral clock support for T1024/T1040/T2080. To enable it, define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Don't deref NULL if qman portal lacks cell-indexScott Wood2015-05-04-2/+7
| | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc: add 2 common dcache assembly functionsValentin Longchamp2015-05-04-164/+0
| | | | | | | | | | | | | | This patch defines the 2 flush_dcache_range and invalidate_dcache_range functions for all the powerpc architecture. Their implementation is borrowed from the kernel's misc_32.S file and replace the ones from mpc86xx and ppc4xx since they were equivalent. This is a fix for the problem introduced by this patch: http://patchwork.ozlabs.org/patch/448849/ Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t4rdb: Add SD boot support for T4240RDB boardChunhe Lan2015-05-04-0/+1
| | | | | | | | | | | | This patch adds SD boot support for T4240RDB board. SPL framework is used. PBL initializes the internal RAM and copies SPL to it. Then SPL initializes DDR using SPD and copies u-boot from SD card to DDR, finally SPL transfers control to u-boot. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> [York Sun: Fix T4240RDB_SDCARD_defcofig] Reviewed-by: York Sun <yorksun@freescale.com>
* drivers: usb: fsl: Workaround for Erratum A004477Nikhil Badola2015-05-04-0/+4
| | | | | | | | | | Add a delay of 1 microsecond before issuing soft reset to the controller to let ongoing ULPI transaction complete. This prevents corruption of ULPI Function Control Register which eventually prevents phy clock from entering to low power mode Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/T4240EMU: Remove T4240EMU boardYork Sun2015-05-04-3/+0
| | | | | | | T4240 SoC has been available for a long time. Emulator support is no longer needed. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Use GOT when loading IVORs post-relocationScott Wood2015-05-04-15/+20
| | | | | | | | | | | | | | | | | | | | | Commit 96d2bb952bb ("powerpc/mpc85xx: Don't relocate exception vectors") simplified IVOR initialization a bit too much, failing to use the post-relocation offset. This doesn't cause a problem with normal NOR boot, in which both the pre-relocation and post-relocation addresses are 64 KiB aligned. However, if TEXT_BASE is only 4 KiB aligned, such as for NAND/SD/etc. boot on some targets, as well as the QEMU target, the post-relocation address will not be the same in the lower 16 bits, as reserve_uboot() ensures that the relocation address is always 64 KiB aligned even if the pre-relocation address was not. Use the GOT to get the proper post-relocation offsets. Fixes: 96d2bb952bb ("powerpc/mpc85xx: Don't relocate exception vectors") Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Alexander Graf <agraf@suse.de> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Tested-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/ifc: Add 64KB page supportJaiprakash Singh2015-04-23-6/+6
| | | | | | | | | | | | | | | | IFC has two register pages.Till IFC version 1.4 each register page is 4KB each.But IFC ver 2.0 register page size is 64KB each.IFC regiters structure is break into two viz FCM and RUNTIME.FCM(Flash control machine) registers are defined in PAGE0 and controls IFC generic functionality. RUNTIME registers are defined in PAGE1 and controls NAND and GPCM funcinality. FCM and RUNTIME structures defination is common for IFC version 1.4 and 2.0. Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Remove some dead codeScott Wood2015-04-20-137/+1
| | | | | | | | | | | | | | | | | | | U-Boot does not have system calls (the services it exposes to standalone commands use a different mechanism), so the syscall handler is dead code. It's also broken code, as it assumes it is located at 0xc00 -- while even before the patch to stop relocating exception vectors to 0, U-Boot had the syscall at 0x900. The critical and machine check return paths are never called -- the regular exception return path is used instead, which works because xSRR0/1 have already been saved and can be restored via the regular SRR0/1 (we don't care too much in U-Boot about taking a critical/mcheck inside another exception prolog/epilog). Also remove a few other small unused functions. Signed-off-by: Scott Wood <scottwood@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Don't relocate exception vectorsScott Wood2015-04-20-121/+57
| | | | | | | | | | | | | | | | Booke does not require exception vectors to be located at address zero. U-Boot was doing so anyway, simply because that's how it had been done on other PPC. The downside of this is that once the OS is loaded to address zero, the exception vectors have been overwritten -- which makes it difficult to diagnose a crash that happens after that point. The IVOR setup and trap entry code is simplified somewhat as a result. Also, there is no longer a need to align individual exceptions on 0x100 byte boundaries. Signed-off-by: Scott Wood <scottwood@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net: cosmetic: Fix var naming net <-> eth driversJoe Hershberger2015-04-18-11/+12
| | | | | | | | | | | | | | | Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* net: cosmetic: Cleanup internal packet buffer namesJoe Hershberger2015-04-18-2/+2
| | | | | | | This patch cleans up the names of internal packet buffer names that are used within the network stack and the functions that use them. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* net: cosmetic: Name ethaddr variables consistentlyJoe Hershberger2015-04-18-11/+9
| | | | | | | | Use "_ethaddr" at the end of variables and drop CamelCase. Make constant values actually 'const'. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* powerpc: ids8313: use "select" instead of default value in defconfigMasahiro Yamada2015-04-18-0/+1
| | | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: select CONFIG_DM* optionsMasahiro Yamada2015-04-18-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As mentioned in the previous commit, adding default values in each Kconfig causes problems because it does not co-exist with the "depends on" syntax. (Please note this is not a bug of Kconfig.) We should not do so unless we have a special reason. Actually, for CONFIG_DM*, we have no good reason to do so. Generally, CONFIG_DM is not a user-configurable option. Once we convert a driver into Driver Model, the board only works with Driver Model, i.e. CONFIG_DM must be always enabled for that board. So, using "select DM" is more suitable rather than allowing users to modify it. Another good thing is, Kconfig warns unmet dependencies for "select" syntax, so we easily notice bugs. Actually, CONFIG_DM and other related options have been added without consistency: some into arch/*/Kconfig, some into board/*/Kconfig, and some into configs/*_defconfig. This commit prefers "select" and cleans up the following issues. [1] Never use "CONFIG_DM=n" in defconfig files It is really rare to add "CONFIG_FOO=n" to disable CONFIG options. It is more common to use "# CONFIG_FOO is not set". But here, we do not even have to do it. Less than half of OMAP3 boards have been converted to Driver Model. Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is weird. Instead, add "select DM" only to appropriate boards, which eventually eliminates "CONFIG_DM=n", etc. [2] Delete redundant CONFIGs Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again in configs/sandbox_defconfig. Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and defines it also in omap3_beagle_defconfig and devkit8000_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* net: Provide a function to get the current MAC addressJoe Hershberger2015-04-18-3/+3
| | | | | | | | | The current implementation exposes the eth_device struct to code that needs to access the MAC address. Add a wrapper function for this to abstract away the pointer for this operation. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* remove unnecessary version.h includesRob Herring2015-03-24-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: "David Müller" <d.mueller@elsoft.ch> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Torsten Koschorrek <koschorrek@synertronixx.de> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
* powerpc: ppc4xx: remove korat board supportMasahiro Yamada2015-03-17-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Larry Johnson <lrj@acm.org>
* powerpc: mpc5xxx: remove galaxy5200 board supportMasahiro Yamada2015-03-17-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Eric Millbrandt <emillbrandt@dekaresearch.com>
* powerpc: ppc4xx: remove W7OLMC/W7OLMG board supportMasahiro Yamada2015-03-17-7/+0
| | | | | | | | They have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Erik Theisen <etheisen@mindspring.com>
generated by cgit v1.1 at 2024-11-11 18:12:27 +0000