summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu
Commit message (Collapse)AuthorAgeLines
* Make sure that argv[] argument pointers are not modified.Wolfgang Denk2010-07-04-37/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hush shell dynamically allocates (and re-allocates) memory for the argument strings in the "char *argv[]" argument vector passed to commands. Any code that modifies these pointers will cause serious corruption of the malloc data structures and crash U-Boot, so make sure the compiler can check that no such modifications are being done by changing the code into "char * const argv[]". This modification is the result of debugging a strange crash caused after adding a new command, which used the following argument processing code which has been working perfectly fine in all Unix systems since version 6 - but not so in U-Boot: int main (int argc, char **argv) { while (--argc > 0 && **++argv == '-') { /* ====> */ while (*++*argv) { switch (**argv) { case 'd': debug++; break; ... default: usage (); } } } ... } The line marked "====>" will corrupt the malloc data structures and usually cause U-Boot to crash when the next command gets executed by the shell. With the modification, the compiler will prevent this with an error: increment of read-only location '*argv' N.B.: The code above can be trivially rewritten like this: while (--argc > 0 && **++argv == '-') { char *arg = *argv; while (*++arg) { switch (*arg) { ... Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
* ppc4xx: Cleanup Boot/FLASH TLB reassignment for PPC440/460Stefan Roese2010-07-01-15/+6
| | | | | | | | | | | | | | | | | | Background Info: Some PPC440/460 boards have caches enabled in the Boot/FLASH TLB (via init.S) to speed up the boot process. In relocate_code (start.S) the cache inhibit attribute for this TLB is set to disable cache. This is needed for the CFI FLASH driver. This patch now cleans this code up: - CONFIG_SYS_TLB_FOR_BOOT_FLASH is defined to 0 (default TLB) if not defined in the top of this file. This way, we can remove an ugly #ifdef in this code. - Replace complex "#if defined(CONFIG_440EP) || defined(CONFIG_GR)..." statement with "#if defined(CONFIG_440)". - Remove unnecessary cache invalidate calls resulting in faster bootup. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: DDR2: Complete RDSS configuration on non-SPD based boardsStefan Roese2010-07-01-14/+38
| | | | | | | | | As described in item #10 of the SDRAM initialization (chapter 22.2.9 of the PPC460EX/EXr/GT users manual), RDSS may need to be adjusted. The code for this is now factored out and executed for non-SPD based boards as well. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Enable overwriting of default scan window for IBM DDR2 controllerStefan Roese2010-07-01-12/+5
| | | | | | | | | | | This patch makes it possible to overwrite the default auto-calibration scan window (SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR] values) with board specific values. The parameters of the weak default function are corrected as well. This way we don't need the casts any more. This feature will be used by an upcoming PPC460GT board port. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Enable PCIe support without PCI support on PPC440/460Stefan Roese2010-07-01-1/+11
| | | | | | | | | | | By not defining CONFIG_SYS_PCI_MASTER_INIT and CONFIG_SYS_PCI_TARGET_INIT, PCI support (host and adapter) will not be enabled. But it's still possible to use the U-Boot PCI infrastructure for the PCIe ports. This configuration option is needed for a new 460GT board, which uses PCIe but has PCI disabled. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Enable booting with Option E on 460EX/EXr/GTStefan Roese2010-07-01-10/+39
| | | | | | | | | This patch enables booting with option E on the PPC460EX/EXr/GT. When booting with Option E, the PLL is in bypass, CPR0_PLLC[ENG]=0. The Software Boot Configuration Procedure is needed to engage the PLL and perform a chip reset. Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' into nextWolfgang Denk2010-06-30-76/+0
|\
| * MPC512x: workaround data corruption for unaligned local bus accessesWolfgang Denk2010-06-29-76/+0
| | | | | | | | | | | | | | | | | | | | | | Commit 460c2ce3 "MPC5200: workaround data corruption for unaligned local bus accesses" fixed the problem for MPC5200 only, but MPC512x is affected as well, so apply the same fix here, too. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* | Remove AmigaOneG3SE boardWolfgang Denk2010-06-23-27/+8
| | | | | | | | | | | | | | | | | | | | The AmigaOneG3SE board has been orphaned or a very long time, and broken for more than 12 releases resp. more than 3 years. As nobody seems to be interested any more in this stuff we may as well ged rid of it, especially as it clutters many areas of the code so it is a continuous pain for all kinds of ongoing work. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitionsWolfgang Denk2010-06-23-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_BUS_HZ has not really been used anywhere except to be redined as CONFIG_SYS_BUS_CLK; in addition, the mpc7448hpc2 had the bogus CONFIG_SYS_CONFIG_BUS_CLK setting which duplicated the funtionality. Change all this to use CONFIG_SYS_BUS_CLK consistently. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Frank Gottschling <fgottschling@eltec.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Eran Man <eran@nbase.co.il> Cc: Stefan Roese <sr@denx.de> Cc: Nye Liu <nyet@zumanetworks.com> Cc: Roy Zang <tie-fei.zang@freescale.com>
* | Merge branch 'master' into nextWolfgang Denk2010-06-23-0/+76
|\ \ | |/
| * MPC5200: workaround data corruption for unaligned local bus accessesWolfgang Denk2010-06-23-0/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC5200 has a nasty problem that will cause silent data corruption when performing unaligned 16 or 32 byte accesses when reading from the local bus - typically this affects reading from flash. The problem can be easily shown: => md fc0c0000 10 fc0c0000: 323e4337 01626f6f 74636d64 3d72756e 2>C7.bootcmd=run fc0c0010: 206e6574 5f6e6673 00626f6f 7464656c net_nfs.bootdel fc0c0020: 61793d35 00626175 64726174 653d3131 ay=5.baudrate=11 fc0c0030: 35323030 00707265 626f6f74 3d656368 5200.preboot=ech => md fc0c0001 10 fc0c0001: 65636801 00000074 0000003d 00000020 ech....t...=... fc0c0011: 0000005f 00000000 00000074 00000061 ..._.......t...a fc0c0021: 00000000 00000064 00000065 00000035 .......d...e...5 fc0c0031: 00000000 00000062 0000003d 0000006f .......b...=...o => md.w fc0c0001 10 fc0c0001: 0000 3701 0000 6f74 0000 643d 0000 6e20 ..7...ot..d=..n fc0c0011: 0000 745f 0000 7300 0000 6f74 0000 6c61 ..t_..s...ot..la This commit implements a workaround at least for the most blatant problem: using memcpy() from NOR flash. We rename the assembler routine into __memcpy() and provide a wrapper, which will use a byte-wise copy loop for unaligned source or target addresses when reading from NOR flash, and branch to the optimized __memcpy() in all other cases, thus minimizing the performance impact. Tested on lite5200b and TQM5200S. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
* | video: cfb_console: add weak default video_set_lut()Anatolij Gustschin2010-06-14-14/+0
|/ | | | | | | | | Do not enforce drivers to provide empty video_set_lut() if they do not implement indexed color (8 bpp) frame buffer support. Add default function to the cfb_console driver and remove empty video_set_lut() functions. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2010-05-26-20/+20
|\
| * mpc83xx: don't shift pre-shifted ACR, SPCR, SCCR bitfield masks in cpu_init.cKim Phillips2010-05-21-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c7190f028fa950d4d36b6d0b4bb3fc72602ec54c "mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields" incorrectly shifted <register>_<bitfield> (e.g. ACR_PIPE_DEP) values that were preshifted by their definition in mpc83xx.h. this patch removes the unnecessary shifting for the newly utilized mask values in cpu_init.c, and prevents seemingly unrelated symptoms such as an mpc8379erdb board from locking up whilst performing a networking operation, e.g. a tftp. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * Fixed two typos in arch/powerpc/cpu/mpc83xx/start.S.Horst Kronstorfer2010-05-21-2/+2
| | | | | | | | | | Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Convert Makefiles from COBJS-${} to COBJS-$()Kumar Gala2010-05-26-5/+5
|/ | | | | | Match style we use almost everywhere else Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2010-05-17-0/+2
|\
| * mpc83xx: fix NAND bootstrap too big errorKim Phillips2010-05-17-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 167cdad1372917bc11c636c359aad02625291fa9 "SERIAL: Enable port-mapped access" inadvertently broke 83xx nand boards by converting NS16550_init to use io accessors, which expanded the size of the generated code. this patch fixes the problem by removing icache functions from the nand builds, which somewhat follows commit 1a2e203b31d33fb720f2cf1033b241ad36ab405a "mpc83xx: turn on icache in core initialization to improve u-boot boot time" Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Enabled support for Rev 1.3 SPD for DDR2 DIMMsYork Sun2010-05-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SPD has minor change from Rev 1.2 to 1.3. This patch enables Rev 1.3. The difference has ben examined and the code is compatible. Speed bins is not verified on hardware for CL7 at this moment. This patch also enables SPD Rev 1.x where x is up to "F". According to SPD spec, the lower nibble is optionally used to determine which additinal bytes or attribute bits have been defined. Software can safely use defaults. However, the upper nibble should always be checked. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | 85xx/fsl-sata: Use is_serdes_configured() to determine if SATA is enabledKumar Gala2010-05-12-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | On the MPC85xx platform if we have SATA its connected on SERDES. Determing if SATA is enabled via sata_initialize should not be board specific and thus we move it out of the MPC8536DS board code. Additionally, now that we have is_serdes_configured() we can determine if the given SATA port is enabled and error out if its not in the driver. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | 85xx/mpc8536ds: Use is_serdes_configured() to determine of PCIe enabledKumar Gala2010-05-12-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | The new is_serdes_configured covers a broader range of devices than the PCI specific code. Use it instead as we convert away from the is_fsl_pci_cfg() code. Additionally move to setting LAWs for PCI based on if its configured. Also updated PCI FDT fixup code to remove PCI controllers from dtb if they are configured. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | 85xx: Add is_serdes_configured() support to MPC8536 SERDESKumar Gala2010-05-12-5/+74
|/ | | | | | | | Add the ability to determine if a given IP block connected on SERDES is configured. This is useful for things like PCIe and SRIO since they are only ever connected on SERDES. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Consolidate bootcount_{store|load} for PowerPCStefan Roese2010-05-06-124/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates bootcount_{store|load} for PowerPC by implementing a common version in arch/powerpc/lib/bootcount.c. This code is now used by all PowerPC variants that currently have these functions implemented. The functions now use the proper IO-accessor functions to read/write the values. This code also supports two different bootcount versions: a) Use 2 separate words (2 * 32bit) to store the bootcounter b) Use only 1 word (2 * 16bit) to store the bootcounter Version b) was already used by MPC5xxx. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Acked-by: Kim Phillips <kim.phillips@freescale.com> for 83xx parts Cc: Michael Zaidman <michael.zaidman@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Anatolij Gustschin <agust@denx.de>
* Remove unused "local_crc32" function.Detlev Zundel2010-05-03-40/+1
| | | | | | | For code archeologists, this is a nice example of copy and paste history. Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2010-04-28-6/+8
|\
| * mpc83xx: use "A" nomenclature only on mpc834x and mpc836x familiesKim Phillips2010-04-22-1/+3
| | | | | | | | | | | | | | | | | | marketing didn't extend their postpend-with-an-A naming strategy on rev.2's and higher beyond the first two 83xx families. This patch stops us from misreporting we're running e.g., on an MPC8313EA, when such a name doesn't exist. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: Use CONFIG_FSL_ESDHC to enable sdhc clkRini van Zetten2010-04-22-5/+5
| | | | | | | | | | | | | | | | | | | | | | Enable eSDHC Clock based on generic CONFIG_FSL_ESDHC define instead of a platform define. This will enable all the 83xx platforms to use sdhc_clk based on CONFIG_FSL_ESDHC. It's the same patch as commit 6b9ea08c5010eab5ad1056bc9bf033afb672d9cc for the ppc/85xx. Signed-off-by: Rini <rini@arvoo.nl> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk2010-04-27-32/+368
|\ \
| * | mpc5121: add common post_word_load/store codeAnatolij Gustschin2010-04-24-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | Add common post_word_load/post_word_store routines for all mpc5121 boards. pdm360ng board POST support added by subsequent patch needs them. Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc5121: add support for PDM360NG boardAnatolij Gustschin2010-04-24-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | PDM360NG is a MPC5121E based board by ifm ecomatic gmbh. Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc5121: determine RAM size using get_ram_size()Anatolij Gustschin2010-04-24-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | Configure CONFIG_SYS_MAX_RAM_SIZE address range in DDR Local Access Window and determine the RAM size. Fix DDR LAW afterwards using detected RAM size. Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc512x: make MEM IO Control configuration a board config optionAnatolij Gustschin2010-04-24-1/+1
| | | | | | | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc5121: add PSC serial communication routinesAnatolij Gustschin2010-04-24-0/+87
| | | | | | | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc512x: add multi serial PSC supportAnatolij Gustschin2010-04-24-28/+238
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend mpc512x serial driver to support multiple PSC ports. Subsequent patches for PDM360NG board support make use of this functionality by defining CONFIG_SERIAL_MULTI in the board config file. Additionally the used PSC devices are specified by defining e.g. CONFIG_SYS_PSC1, CONFIG_SYS_PSC4 and CONFIG_SYS_PSC6. Support for PSC devices other than 1, 3, 4 and 6 is not added by this patch because these aren't used currently. In the future it can be easily added using DECLARE_PSC_SERIAL_FUNCTIONS(N) and INIT_PSC_SERIAL_STRUCTURE(N) macros in cpu/mpc512x/serial.c. Additionally you have to add code for registering added devices in serial_initialize() in common/serial.c. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2010-04-27-45/+67
|\ \ \ | |/ / |/| |
| * | ppc: Split MPC83xx SERDES code from MPC85xx/MPC86xx/QorIQKumar Gala2010-04-26-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC83xx SERDES control is different from the other FSL PPC chips. For now lets split it out so we can standardize on interfaces for determining of a device on SERDES is configured. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc85xx: Add the ability to set LCRR[CLKDIV] to improve R/W speed of flashLan Chunhe2010-04-26-0/+15
| | | | | | | | | | | | | | | | | | Signed-off-by: Lan Chunhe <b25806@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | 85xx: clean up the io_sel for PCI express of P1022Dave Liu2010-04-26-7/+6
| | | | | | | | | | | | | | | | | | | | | clean up the wrong io_sel for PCI express according to latest manual. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | 85xx: Fix compile warningKumar Gala2010-04-26-0/+2
| | | | | | | | | | | | | | | | | | | | | cpu.c: In function 'checkcpu': cpu.c:47: warning: unused variable 'gur' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | 85xx: Convert cpu_init_f code to use out_be32 for LBC registersKumar Gala2010-04-26-18/+18
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | fsl-ddr: Add extra cycle to turnaround timesDave Liu2010-04-26-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add an extra cycle turnaround time to read->write to ensure stability at high DDR frequencies. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | ppc/p4080: Fix synchronous frequency calculationsSrikanth Srinivasan2010-04-26-19/+23
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | serial: struct serial_device: add uninit() entry for driversAnatolij Gustschin2010-04-24-0/+6
|/ | | | | | | | | | | | | | | Subsequent patch extends mpc512x serial driver to support multiple PSC ports. The driver will provide an uninit() function to stop the serial controller and to disable the controller's clock. Adding uninit() entry to struct serial_device allows disabling the serial controller after usage of a stdio serial device. This patch adds uninit() entry to the struct serial_device and fixes initialization of this structure in the code accordingly. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Move arch/ppc to arch/powerpcStefan Roese2010-04-21-0/+82264
As discussed on the list, move "arch/ppc" to "arch/powerpc" to better match the Linux directory structure. Please note that this patch also changes the "ppc" target in MAKEALL to "powerpc" to match this new infrastructure. But "ppc" is kept as an alias for now, to not break compatibility with scripts using this name. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Acked-by: Kim Phillips <kim.phillips@freescale.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Anatolij Gustschin <agust@denx.de>
generated by cgit v1.1 at 2024-08-19 14:10:37 +0000