summaryrefslogtreecommitdiff
path: root/arch/mips
Commit message (Collapse)AuthorAgeLines
...
* mips: Move per_clk and dev_clk to arch_global_dataSimon Glass2013-02-04-4/+5
| | | | | | | | Move these field into arch_global_data and tidy up. The other CONFIG_JZSOC fields are used by various architectures, so just remove the #ifdef bracketing for these. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Move lastinc to arch_global_dataSimon Glass2013-02-01-6/+6
| | | | | | Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Move tbl to arch_global_dataSimon Glass2013-02-01-6/+6
| | | | | | Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* Add architecture-specific global dataSimon Glass2013-02-01-0/+5
| | | | | | | | | | | | | We plan to move architecture-specific data into a separate structure so that we can make the rest of it common. As a first step, create struct arch_global_data to hold these fields. Initially it is empty. This patch applies to all archs at once. I can split it if this is really a pain. Signed-off-by: Simon Glass <sjg@chromium.org>
* MIPS: add unified u-boot.lds fileGabor Juhos2013-01-31-0/+84
| | | | | | | | | | | | The patch adds an unified linker script file which can be used for all currently supported MIPS targets. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Stefan Roese <sr@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Xiangfu Liu <xiangfu@openmobilefree.net> Acked-by: Stefan Roese <sr@denx.de>
* MIPS: remove OUTPUT_FORMAT from linker scriptsGabor Juhos2013-01-30-0/+12
| | | | | | | | | | | | | | | | The OUTPUT_FORMAT command in linker scripts was always misused due to some endianess and toolchain problems. Use GCC flags to ensure proper output format, and get rid of the OUTPUT_FORMAT commands in the board specific u-boot.lds files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Stefan Roese <sr@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
* MIPS: xburst: simplify relocation offset calculationGabor Juhos2013-01-30-9/+3
| | | | | | | | | | | | | | | | | | The current code uses four instructions and a temporary register to calculate the relocation offset and to adjust the gp register. The relocation offset can be calculated directly from the CONFIG_SYS_MONITOR_BASE constant and from the destination address. The resulting offset can be used to adjust the gp pointer. This approach makes the code a bit simpler because it needs two instructions only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
* MIPS: simplify relocated _G_O_T_ address calculationGabor Juhos2013-01-30-12/+3
| | | | | | | | | | | | | | | The difference between the address of the original and the relocated _GLOBAL_OFFSET_TABLE_ is always the same as the relocation offset. The relocation offset is already computed and it is available in the 's1/t6' register. Use that to adjust the relocated _G_O_T_ address, instead of calculating the offset again from the _gp value. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
* MIPS: start.S: don't save flush_cache parameters in advanceGabor Juhos2013-01-27-20/+4
| | | | | | | | | | | | | | | | Saving the parameters in advance unnecessarily complicates the code. The destination address is already saved in the 's2' register, and that register is not clobbered by the copy loop. The size of the copied data can be computed after the copy loop is done. Change the code to compute the size parameter right before calling flush_cache, and set the destination address parameter in the delay slot of the actuall call. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: start.S: simplify relocation offset calculationGabor Juhos2013-01-27-18/+6
| | | | | | | | | | | | | | | | | The current code uses four instructions and a temporary register to calculate the relocation offset and to adjust the gp register. The relocation offset can be calculated directly from the CONFIG_SYS_MONITOR_BASE constant and from the destination address. The resulting offset can be used to adjust the gp pointer. This approach makes the code a bit simpler because it needs two instructions only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: start.S: save reused arguments earlier in relocate_codeGabor Juhos2013-01-27-4/+6
| | | | | | | | | Save the reused parameters at the beginning of the 'relocate_code' function. This makes the function a bit more readable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: start.S: set sp register directlyGabor Juhos2013-01-27-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code uses two instructions to load the stack pointer into the 'sp' register. This results in the following assembly code: 468: 3c088040 lui t0,0x8040 46c: 251d0000 addiu sp,t0,0 The first instuction loads the stack pointer into the 't0' register then the value of the 'sp' register is computed by adding zero to the value of the 't0' register. The same issue present on the 64-bit version as well: 56c: 3c0c8040 lui t0,0x8040 570: 659d0000 daddiu sp,t0,0 Change the code to load the stack pointer directly into the 'sp' register. The generated code is functionally equivalent to the previous version but it is simpler. 32-bit: 468: 3c1d8040 lui sp,0x8040 64-bit: 56c: 3c1d8040 lui sp,0x8040 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: start.S: fix boundary check in relocate_codeGabor Juhos2013-01-27-3/+3
| | | | | | | | | | | | | The loop code copies more data with one than necessary due to the 'ble' instuction. Use the 'blt' instruction instead to fix that. Due to the lack of suitable hardware the Xburst specific code is compile tested only. However the change is quite obvious. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: start{, 64}.S: fill branch delay slots with NOP instructionsGabor Juhos2013-01-22-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | The romReserved and romExcHandle handlers are accessed by a branch instruction however the delay slots of those instructions are not filled. Because the start.S uses the 'noreorder' directive, the assembler will not fill the delay slots either, and leads to the following assembly code: 0000056c <romReserved>: 56c: 1000ffff b 56c <romReserved> 00000570 <romExcHandle>: 570: 1000ffff b 570 <romExcHandle> In the resulting code, the second branch instruction is placed into the delay slot of the first branch instruction, which is not allowed on the MIPS architecture. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: convert IO port accessor functions to 'static inline'Gabor Juhos2013-01-22-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The currently used 'extern inline' directive causes the following compiler warnings if CONFIG_SWAP_IO_SPACE is defined: <...>/include/asm/io.h:345:1: warning: '__fswab32' is static but used in inline function '__outlc_p' which is not static [enabled by default] <...>/include/asm/io.h:345:1: warning: '__fswab32' is static but used in inline function '__outl_p' which is not static [enabled by default] <...>/include/asm/io.h:345:1: warning: '__fswab32' is static but used in inline function '__outlc' which is not static [enabled by default] <...>/include/asm/io.h:345:1: warning: '__fswab32' is static but used in inline function '__outl' which is not static [enabled by default] <...>/include/asm/io.h:344:1: warning: '__fswab16' is static but used in inline function '__outwc_p' which is not static [enabled by default] <...>/include/asm/io.h:344:1: warning: '__fswab16' is static but used in inline function '__outw_p' which is not static [enabled by default] <...>/include/asm/io.h:344:1: warning: '__fswab16' is static but used in inline function '__outwc' which is not static [enabled by default] <...>/include/asm/io.h:344:1: warning: '__fswab16' is static but used in inline function '__outw' which is not static [enabled by default] <...>/include/asm/io.h:341:1: warning: '__fswab32' is static but used in inline function '__inlc_p' which is not static [enabled by default] <...>/include/asm/io.h:341:1: warning: '__fswab32' is static but used in inline function '__inl_p' which is not static [enabled by default] <...>/include/asm/io.h:341:1: warning: '__fswab32' is static but used in inline function '__inlc' which is not static [enabled by default] <...>/include/asm/io.h:341:1: warning: '__fswab32' is static but used in inline function '__inl' which is not static [enabled by default] <...>/include/asm/io.h:340:1: warning: '__fswab16' is static but used in inline function '__inwc_p' which is not static [enabled by default] <...>/include/asm/io.h:340:1: warning: '__fswab16' is static but used in inline function '__inw_p' which is not static [enabled by default] <...>/include/asm/io.h:340:1: warning: '__fswab16' is static but used in inline function '__inwc' which is not static [enabled by default] <...>/include/asm/io.h:340:1: warning: '__fswab16' is static but used in inline function '__inw' which is not static [enabled by default] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: use inline directive for __in*s functionsGabor Juhos2013-01-22-1/+1
| | | | | | | | | All other IO accessor functions are using the 'inline' directive. Use that also for the __in*s to make it consistent with the other variants. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: bootm.c: add support for 'prep' and 'go' subcommandsGabor Juhos2013-01-16-2/+13
| | | | | | | | | | | The bootm command supports subcommands since long time however those subcommands are not yet usable on MIPS. The patch is based on the ARM implementation, and it adds support for the 'prep' and 'go' subcommands only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: bootm.c: separate environment initializationGabor Juhos2013-01-16-23/+27
| | | | | | | | | Move the environment initialization code into a separate function. This make the code reusable for bootm subcommands. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: bootm.c: separate linux jump codeGabor Juhos2013-01-16-13/+19
| | | | | | | | Move the actual jump code into a separate function. This make the code reusable for bootm subcommands. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: bootm.c: use debug macro to print debug messageGabor Juhos2013-01-16-3/+1
| | | | | | | | The '## Transferring control ...' message is printed only if DEBUG is enabled. Get rid of the 'ifdef DEBUG' statement and use the debug macro instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
* mips: serial: Fix busted manual relocationJoe Hershberger2012-12-12-0/+3
| | | | | | | | | serial_initialize() must be called after relocation to adjust the pointers to putc(), getc(), etc. This is busted ever since the serial driver-model-ification series. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* MIPS: constify mips_io_port_baseDaniel Schwierzeck2012-12-12-1/+1
| | | | | | | mips_io_port_base is exported as 'extern const unsigned long mips_io_port_base;' in arch/mips/include/asm/io.h. Thus make the variable const too. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* MIPS: constify address pointer in test_bit()Daniel Schwierzeck2012-12-08-1/+1
| | | | | | | | | | | | Fix several warnings when enabling UBIFS on MIPS: In file included from ubifs.h:2137:0, from ubifs.c:26: misc.h: In function 'ubifs_zn_dirty': misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default] ../include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *' Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* MIPS: fix a latent bug on initialize $gpZhi-zhou Zhang2012-12-08-1/+6
| | | | | | | | | If bal is 8 bytes aligned, the _gp will not be 8 bytes aligned. then the following ld insntrustion generates a Adel exception. So here make _gp be always aligned in 8 bytes. Signed-off-by: Zhi-zhou Zhang <zhizhou.zh@gmail.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2012-11-27-2/+0
|\
| * MIPS: do not initialize timestamp variable before relocate_codeZhi-zhou Zhang2012-11-25-2/+0
| | | | | | | | | | | | | | | | | | Because timestamp is declared as `static', we needn't initialize it by writing it a zero. If we do it before relocate_code, we will write into a flash address(0xffffffffbfc0xxxx). Signed-off-by: Zhi-zhou Zhang <zhizhou.zh@gmail.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | usb: use linux/usb/ch9.h instead of usbdescriptors.hIlya Yanok2012-11-20-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | Linux usb/ch9.h seems to have all the same information (and more) as usbdescriptors.h so use the former instead of the later one. As a consequense of this change USB_SPEED_* values don't correspond directly to EHCI speed encoding anymore, I've added necessary recoding in EHCI driver. Also there is no point to put speed into pipe anymore so it's removed and a bunch of host drivers fixed to look at usb_device->speed instead. Old usbdescriptors.h included is not removed as it seems to be used by old USB device code. This makes usb.h and usbdevice.h incompatible. Fortunately the only place that tries to include both are the old MUSB code and it needs usb.h only for USB_DMA_MINALIGN used in aligned attribute on musb_regs structure but this attribute seems to be unneeded (old MUSB code doesn't support any DMA at all). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* common: Convert the U-Boot commands to LG-arraysMarek Vasut2012-10-22-2/+2
| | | | | | | | | | | | | | | | | | This patch converts the old method of creating a list of command onto the new LG-arrays code. The old u_boot_cmd section is converted to new u_boot_list_cmd subsection and LG-array macros used as needed. Minor adjustments had to be made to the common code to work with the LG-array macros, mostly the fixup_cmdtable() calls are now passed the ll_entry_start and ll_entry_count instead of linker-generated symbols. The command.c had to be adjusted as well so it would use the newly introduced LG-array API instead of directly using linker-generated symbols. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
* mips: Change global data baudrate to intSimon Glass2012-10-19-2/+2
| | | | | | | | | This doesn't need to be a long, so change it. Also adjust bi_baudrate to be unsigned. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2012-10-17-60/+884
|\
| * MIPS: add board qemu-mips64 supportZhi-zhou Zhang2012-10-16-0/+802
| | | | | | | | | | | | | | | | | | | | | | | | | | Both big-endian and little-endian are tested with below commands: Rom version: (Default, Now we config it as rom version) qemu-system-mips64el -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic qemu-system-mips64 -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic Ram version: qemu-system-mips64el -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic qemu-system-mips64 -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * MIPS: add support for 64 bit addressingZhi-zhou Zhang2012-10-16-1/+23
| | | | | | | | | | | | | | | | | | Prepare for upcoming mips64 support. This patch add mips64 address support. Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com> [daniel.schwierzeck@gmail.com: prefer _MIPS_SZLONG in posix_types.h to fix some warnings] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * MIPS: don't use camel-case styleZhi-zhou Zhang2012-10-16-59/+59
| | | | | | | | | | | | Replace camel-case style with upper-case style globally. Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com>
* | split AU1X00 specific code from cmd_ide.cPavel Herrmann2012-10-17-1/+33
| | | | | | | | | | | | move special case of ide_swap_read() for AU1X00 SoC into SoC-specific directory. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
* | serial: Use default_serial_puts() in driversMarek Vasut2012-10-17-23/+3
|/ | | | | | | | | | Replace the in-place ad-hoc implementation of serial_puts() within the drivers with default_serial_puts() call. This cuts down on the code duplication quite a bit. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* usb: lowlevel interface change to support multiple controllersLucas Stach2012-10-15-2/+2
| | | | | | | | | | | Carry an index in the lowlevel usb functions to make specify the respective usb controller. Also pass through an controller struct from lowlevel_init to the creation of the root usb device of this controller. Signed-off-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Marek Vasut <marex@denx.de>
* serial: Remove CONFIG_SERIAL_MULTI from serial driversMarek Vasut2012-10-15-96/+0
| | | | | | | | | | | | Remove the support for not-CONFIG_SERIAL_MULTI part from serial port drivers and some board files. Since CONFIG_SERIAL_MULTI is now enabled by default, that part is a dead code. Remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
* serial: mips: Implement CONFIG_SERIAL_MULTI into JZ serial driverMarek Vasut2012-10-15-6/+61
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into JZ serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the JZ driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* serial: mips: Implement CONFIG_SERIAL_MULTI into asc serial driverMarek Vasut2012-10-15-6/+61
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into asc serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the asc driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* serial: mips: Implement CONFIG_SERIAL_MULTI into au1x00 serial driverMarek Vasut2012-10-15-10/+64
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into au1x00 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the au1x00 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* malloc: remove extern declarations of malloc_bin_reloc() in board.c filesDaniel Schwierzeck2012-09-26-1/+0
| | | | | | | | | | | | | Declare malloc_bin_reloc() in malloc.h and remove all extern declarations in various board.c files to get rid of one checkpatch.pl warning. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Andreas Bießmann <andreas.devel@gmail.com> Cc: Jason Jin <Jason.jin@freescale.com> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Andreas Bießmann <andreas.devel@gmail.com>
* MIPS: move CONFIG_STANDALONE_LOAD_ADDR to CPU config makefilesDaniel Schwierzeck2012-08-24-2/+4
| | | | | | Prepare for upcoming MIPS64 CPU support. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* MIPS: factor out endianess flag handling to arch config.mkDaniel Schwierzeck2012-08-24-22/+20
| | | | | | This is CPU independent and should be configured architecture-wide. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* dm: mips: Import libgcc components from LinuxMarek Vasut2012-08-17-0/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Import ashldr3, ashrdi3 and lshrdi3 to squash possible libgcc fp mismatch, resulting in the following warning: mips-linux-gnu-ld: Warning: /usr/lib/gcc/mips-linux-gnu/4.7/libgcc.a(_lshrdi3.o) uses hard float, u-boot uses soft float mips-linux-gnu-ld: Warning: /usr/lib/gcc/mips-linux-gnu/4.7/libgcc.a(_ashldi3.o) uses hard float, u-boot uses soft float Imported from Linux (linux-next 20120723) as of commit: commit 72fbfb260197a52c2bc2583f3e8f15d261d0f924 Author: Ralf Baechle <ralf@linux-mips.org> Date: Wed Jun 7 13:25:37 2006 +0100 [MIPS] Fix optimization for size build. It took a while longer than on other architectures but gcc has finally started to strike us as well ... This also fixes the damage by 6edfba1b33c701108717f4e036320fc39abe1912. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> [<daniel.schwierzeck@gmail.com>: removed USE_PRIVATE_LIBGCC = yes] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* dm: mips: Fix lb60 timer codeMarek Vasut2012-08-17-6/+6
| | | | | | | | | | | | | | | | | | | | The timer code contains more halfword writes which trigger gcc errors. The registers are again 32bit, yet written by 16bit writes, fix this: timer.c: In function ‘reset_timer_masked’: timer.c:37:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] timer.c: In function ‘get_timer_masked’: timer.c:43:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] timer.c: In function ‘timer_init’: timer.c:86:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] timer.c:88:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] timer.c:89:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] timer.c:90:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel <zpxu@ingenic.cn> Cc: Shinya Kuribayashi <skuribay@pobox.com> Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
* dm: mips: Fix lb60 WDT controlMarek Vasut2012-08-17-1/+1
| | | | | | | | | | | Write the TSCR register via 32bit write instead of 16bit one. The register is 32bit wide and bit 16 is being set, triggering gcc overflow error and making the code broken. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel <zpxu@ingenic.cn> Cc: Shinya Kuribayashi <skuribay@pobox.com> Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
* global_data: unify global flag definesMike Frysinger2012-08-09-13/+1
| | | | | | | All the global flag defines are the same across all arches. So unify them in one place, and add a simple way for arches to extend for their needs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* MIPS: board.c: move extern declarations to u-boot-mips.hDaniel Schwierzeck2012-06-03-7/+11
| | | | | | This fixes some remaining checkpatch.pl warnings. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: bootm_qemu_mips.c: make checkpatch.pl cleanDaniel Schwierzeck2012-06-03-12/+14
| | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* MIPS: bootm.c: make checkpatch.pl cleanDaniel Schwierzeck2012-06-03-51/+51
| | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>