summaryrefslogtreecommitdiff
path: root/arch/blackfin
Commit message (Collapse)AuthorAgeLines
* blackfin: x86: bootm: Handle PREP stage of bootmSimon Glass2013-07-12-0/+2
| | | | | | | The OS function is now always called with the PREP stage. Adjust the remaining bootm OS functions to deal with this correctly. Signed-off-by: Simon Glass <sjg@chromium.org>
* bfin: Move gpio support for bf54x and bf60x into the generic driver folder.Sonic Zhang2013-05-13-183/+31
| | | | | | | | | | | | | | | The gpio spec for bf54x and bf60x differ a lot from the old gpio driver for bf5xx. A lot of machine macros are used to accomodate both code in one gpio driver. This patch split the old gpio driver and move new gpio2 support to the generic gpio driver folder. - To enable gpio2 driver, macro CONFIG_ADI_GPIO2 should be defined in the board's config header file. - The gpio2 driver supports bf54x, bf60x and future ADI processors, while the older gpio driver supports bf50x, bf51x, bf52x, bf53x and bf561. - All blackfin specific gpio function names are replaced by the generic gpio APIs. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: Add comments for watchdog event initialization.Sonic Zhang2013-05-13-2/+10
| | | | | | | - Add comments for watchdog event initialization. - Make sure the writting operation to MMRs are finished. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: Move blackfin serial driver out of blackfin arch folder.Sonic Zhang2013-05-13-419/+4
| | | | | | | | - Move blackfin serial driver to the generic driver folder. - Move blackfin serial headers to blackfin arch head folder. - Update the include path to blackfin serial header in start up code. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: Move blackfin watchdog driver out of the blackfin arch folder.Sonic Zhang2013-05-13-35/+24
| | | | | | | | | | - Enable hw_watchdog_init() in watchdog.h if CONFIG_HW_WATCHDOG is defined. - Move blackfin hw watchdog driver to the generic driver folder. - Call hw_watchdog_init() from blackfin board init code. - Reuse macro CONFIG_WATCHDOG_TIMEOUT_MSECS - Update README.watchdog accordingly Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* bf609: add SPI register base addressScott Jiang2013-05-13-0/+3
| | | | | | | - BF609 spi driver depend on this. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: Uart divisor should be set after their values are generated.Sonic Zhang2013-05-13-2/+5
| | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: Add memory virtual console to blackfin serial driver.Sonic Zhang2013-05-13-1/+59
| | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: Enable early print via the generic serial API.Sonic Zhang2013-05-13-52/+29
| | | | | | | | | | | Remove blackfin specific implementation of the generic serial API when early print macro is defined. In BFIN_BOOT_BYPASS mode, don't call generic serial_puts, because early print in bypass mode is running before code binary is relocated to the link address. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: bf609: add softswitch config commandBob Liu2013-05-13-0/+18
| | | | | | | Add softswitch_output command for bf609-ezkit to enable softswitches. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: Correct early serial mess output in BYPASS boot mode.Sonic Zhang2013-05-13-3/+27
| | | | | | | | | | | | The early serial should not be configured again in initcode() for BYPASS boot mode and in start() for the other LDR boot modes. In BYPASS boot mode, the start up code is located in Nor flash address other than the DRAM address defined in link script. The code embedded string can't be addressed by its compile time symbol. Calculate it according to the flash offset. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: Set correct early debug serial baudrate.Sonic Zhang2013-05-13-88/+123
| | | | | | | | | | Calculate the early uart clock from the system clock registers set by the bootrom other than the predefine uboot clock macros. Split the early baudrate setting function and the normal baudrate setting one. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: run core1 from L1 code sram start address in uboot init code on core 0Sonic Zhang2013-05-13-0/+34
| | | | | | | | Define core 1 L1 code sram start address. Add function to enable core 1 for BF609 and BF561. Add config macro to allow customer to run core 1 in uboot init code on core 0. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: add baudrate to bdinfoBob Liu2013-05-13-0/+2
| | | | | Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* Blackfin: adjust asm constraints with NMI workaroundMike Frysinger2013-05-13-1/+2
| | | | | | | | | | | | | | | | | | | | | Newer gcc versions will sometimes use a Preg when "r" constraints, but that'll fail if we use an Ireg in the assignment. So force the code to always use a Dreg. This also fixes early boot crashes for older Blackfin parts when compiled with gcc-4.5. This version ends up selecting the same register for the input and output variables which corrupts the output assignment triggering an exception. P2 = 0xffe02008; /* EVT2 */ R0 = RETS; CALL 1f; RTN; 1: P2 = RETS; <-- BAD RETS = R0; [P2] = P2; <-- BAD Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: limit the max memory dma peripheral transfer size to 4 bytes.Sonic Zhang2013-05-13-3/+6
| | | | | | Othersize, the bf609 memory dma halts after being enabled. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* blackfin: Change the member's type in dma structures.Sonic Zhang2013-05-13-12/+12
| | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* lib: consolidate hang()Andreas Bießmann2013-05-01-14/+0
| | | | | | | | | Delete all occurrences of hang() and provide a generic function. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> [trini: Modify check around puts() in hang.c slightly] Signed-off-by: Tom Rini <trini@ti.com>
* Consolidate bool typeYork Sun2013-04-01-3/+0
| | | | | | | | | | | | | 'bool' is defined in random places. This patch consolidates them into a single header file include/linux/types.h, using stdbool.h introduced in C99. All other #define, typedef and enum are removed. They are all consistent with true = 1, false = 0. Replace FALSE, False with false. Replace TRUE, True with true. Skip *.py, *.php, lib/* files. Signed-off-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-03-18-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Albert's rework of the linker scripts conflicted with Simon's making everyone use __bss_end. We also had a minor conflict over README.scrapyard being added to in mainline and enhanced in u-boot-arm/master with proper formatting. Conflicts: arch/arm/cpu/ixp/u-boot.lds arch/arm/cpu/u-boot.lds arch/arm/lib/Makefile board/actux1/u-boot.lds board/actux2/u-boot.lds board/actux3/u-boot.lds board/dvlhost/u-boot.lds board/freescale/mx31ads/u-boot.lds doc/README.scrapyard include/configs/tegra-common.h Build tested for all of ARM and run-time tested on am335x_evm. Signed-off-by: Tom Rini <trini@ti.com>
| * Refactor linker-generated arraysAlbert ARIBAUD2013-03-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type R_ARM_ABS32 to become R_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after. Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC. Conflicts: arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds arch/arm/cpu/armv7/omap-common/u-boot-spl.lds board/ait/cam_enc_4xx/u-boot-spl.lds board/davinci/da8xxevm/u-boot-spl-da850evm.lds board/davinci/da8xxevm/u-boot-spl-hawk.lds board/vpac270/u-boot-spl.lds Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | blackfin: Remove noreturn attribute from cpu_init_f()Simon Glass2013-03-15-1/+0
| | | | | | | | | | | | | | Now that board_init_f() is not marked as noreturn, we need to do the same to blackfin's cpu_init_f() function. Signed-off-by: Simon Glass <sjg@chromium.org>
* | blackfin: Fix up board_type global dataSimon Glass2013-03-15-1/+2
| | | | | | | | | | | | This should be in arch_global_data but was dropped in the change-over. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Introduce generic link section.h symbol filesSimon Glass2013-03-15-0/+27
|/ | | | | | | | | | | | | | | | | | We create a separate header file for link symbols defined by the link scripts. It is helpful to have these all in one place and try to make them common across architectures. Since Linux already has a similar file, we bring this in even though many of the symbols there are not relevant to us. Each architecture has its own asm/sections.h where symbols specifc to that architecture can be added. For now everything except AVR32 just includes the generic header. One change is needed in arch/avr32/lib/board.c to make this conversion work. Reviewed-by: Tom Rini <trini@ti.com> (version 5) Signed-off-by: Simon Glass <sjg@chromium.org>
* blackfin: bf60x: add resume from hibernateSteven Miao2013-03-04-0/+46
| | | | | | | | | Add Bf60x resume from hibernate support Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* blackfin: bf60x: add hw watchdog supportBob Liu2013-03-04-0/+15
| | | | | | Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* blackfin: add bf6xx spi driverScott Jiang2013-03-04-0/+240
| | | | | | | | | | Spi driver for bf60x is different from old one, so implement a new driver for it. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* blackfin: bf60x: add rsi/sdh supportSonic Zhang2013-03-04-2/+36
| | | | | | | | Add rsi/sdh support for bf60x. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* blackfin: bf60x: add gpio supportBob Liu2013-03-04-8/+181
| | | | | | Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* blackfin: bf60x: support big cplb pageBob Liu2013-03-04-6/+44
| | | | | | | | | BF60x support 16K, 64K, 16M and 64M cplb pages, this patch add support for them. So that bf609-ezkit can use it's 128M memory. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* blackfin: bf60x: add dma supportBob Liu2013-03-04-76/+156
| | | | | | | | Add dma support for bf60x. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* blackfin: bf60x: add serial supportSonic Zhang2013-03-04-238/+642
| | | | | | | | Add serial for bf60x. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* blackfin: bf60x: Port blackfin core architecture code to boot on bf60x.Sonic Zhang2013-03-04-41/+468
| | | | | | | | | Set up clocks, DDR controller, Nor flash controller, reboot, serial port. Add new SPI boot modes. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* blackfin: bf60x: new processor header filesBob Liu2013-03-04-1/+1090
| | | | | | | | Add header files for blackfin new processor bf60x. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* blackfin: Use generic global_dataSimon Glass2013-02-04-31/+1
| | | | | | Move blackfin over to use generic global_data. Signed-off-by: Simon Glass <sjg@chromium.org>
* Add architecture-specific global dataSimon Glass2013-02-01-0/+5
| | | | | | | | | | | | | We plan to move architecture-specific data into a separate structure so that we can make the rest of it common. As a first step, create struct arch_global_data to hold these fields. Initially it is empty. This patch applies to all archs at once. I can split it if this is really a pain. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Discard the __u_boot_cmd sectionMarek Vasut2012-10-22-6/+0
| | | | | | | | | | | The command declaration now uses the new LG-array method to generate list of commands. Thus the __u_boot_cmd section is now superseded and redundant and therefore can be removed. Also, remove externed symbols associated with this section from include/command.h . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
* common: Add .u_boot_list into all linker filesMarek Vasut2012-10-22-0/+4
| | | | | | | | | | Add section for the linker-generated lists into all possible linker files, so that everyone can easily use these lists. This is mostly a mechanical adjustment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
* blackfin: Change global data baudrate to intSimon Glass2012-10-19-3/+3
| | | | | | | | | This doesn't need to be a long, so change it. Also adjust bi_baudrate to be unsigned. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@ti.com>
* serial: Remove CONFIG_SERIAL_MULTI from remaining sourcesMarek Vasut2012-10-15-2/+0
| | | | | | | | | | | | Remove the parts depending either on disabled CONFIG_SERIAL_MULTI or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI is now enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: bfin: Flip the jtag serial console to CONFIG_SERIAL_MULTIMarek Vasut2012-10-15-7/+30
| | | | | | | | | | | | | | | | | | | Rework the emulation of serial console via JTAG from simple ad-hoc implementation of serial port routines to CONFIG_SERIAL_MULTI and enable CONFIG_SERIAL_MULTI unconditionally for blackfin. In order for the JTAG serial console to take precedence over all other serial ports available in system, implement override for default_serial_console call returning this JTAG serial console. This brings in a bit of a growth of size, but eventually will allow us to unconditionally enable CONFIG_SERIAL_MULTI throughout the whole U-Boot and maintain only one serial subsystem. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
* serial: bfin: Adjust serial_register_bfin_uart()Marek Vasut2012-10-15-1/+1
| | | | | | | | | | | | Rename the serial_register_bfin_uart() to bfin_initialize_serial() to be consistent with the rest of the naming. Next, remove it's prototype from serial.h and properly insert it into serial.c as the rest of the serial initialization functions. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
* serial: Rename .init() and .uninit() in serial_deviceMarek Vasut2012-10-15-2/+2
| | | | | | | | | | | | Rename .init() to .start() and .uninit() to .stop() in struct serial_device. This allows aligning struct serial_device with closer to struct stdio_dev. The real goal here is to allow these two structures to converge together and eventually make one to be a superset of the other. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tom Rini <trini@ti.com>
* COMMON: Use __stringify() instead of MK_STR()Marek Vasut2012-10-15-3/+1
| | | | | | | | | Kill multiple occurances and redeclaration of MK_STR in favor of __stringify(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
* Consolidate bootcount code into drivers/bootcountStefan Roese2012-09-01-35/+0
| | | | | | | | | | | | | | | | | | | This patch moves all bootcount implementations into a common directory: drivers/bootcount. The generic bootcount driver is now usable not only by powerpc platforms, but others as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Christian Riesch <christian.riesch@omicron.at> Cc: Manfred Rudigier <manfred.rudigier@omicron.at> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de> Tested-by: Valentin Longchamp <valentin.longchamp@keymile.com> Tested-by: Christian Riesch <christian.riesch@omicron.at> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* global_data: unify global flag definesMike Frysinger2012-08-09-13/+1
| | | | | | | All the global flag defines are the same across all arches. So unify them in one place, and add a simple way for arches to extend for their needs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: easylogo: add lzma logosMike Frysinger2012-02-03-0/+2898
| | | | | | | | | | The bf527-ezkit boards are getting too big to fit into their reserved flash space, so we need to use a lzma compressed logo. Since the video driver code is very similar, add lzma compressed support to all of the Blackfin video drivers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place thereTom Rini2012-06-20-3/+0
| | | | | | | | | We provide a default table of { 9600, 19200, 38400, 57600, 115200 } in <config_fallbacks.h> which mkconfig places after <configs/...h> in the generated config file. This is used when a board has not set its own table. Signed-off-by: Tom Rini <trini@ti.com>
* net: move bootfile init into eth_initializeMike Frysinger2012-05-15-6/+1
| | | | | | | | All arches init this the same way, so move the logic into the core net code to avoid duplicating it everywhere else. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* net: punt bd->bi_ip_addrMike Frysinger2012-05-15-4/+0
| | | | | | | | | This field gets read in one place (by "bdinfo"), and we can replace that with getenv("ipaddr"). After all, the bi_ip_addr field is kept up-to-date implicitly with the value of the ipaddr env var. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.1 at 2024-11-05 07:54:27 +0000