summaryrefslogtreecommitdiff
path: root/arch/arm
Commit message (Collapse)AuthorAgeLines
...
* | arm: am437x: Introduce new board cm-t43Nikita Kiryanov2015-08-12-0/+6
| | | | | | | | | | | | | | | | | | | | | | Add initial support for CM-T43, an AM437x based SoM. This support includes: serial, MMC/eMMC, NAND, USB, ETH, I2C, GPIO, DRAM detection. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | gpio: am43xx: expand gpio supportNikita Kiryanov2015-08-12-0/+4
| | | | | | | | | | | | | | | | | | AM43XX SoCs support up to 192 GPIO signals. Make this amount available to the driver. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | arm: am43xx: enable spi clockNikita Kiryanov2015-08-12-0/+1
| | | | | | | | | | | | | | | | | | | | Add spi clock to the list of am43xx basic clocks to make the SPI subsystem available on am43xx systems. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | ARM64: hikey: hi6220: Add u-boot support for the 96boards CE HiKey board.Peter Griffin2015-08-12-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HiKey is the first 96boards consumer edition compliant board. It features a hi6220 SoC which has eight ARM A53 cpu's. This initial port adds support for: - 1) Serial 2) eMMC / SD card 3) USB 4) GPIO It has been tested with Arm Trusted Firmware running u-boot as the BL33 executable. Notes: eMMC has been tested with basic reading of eMMC partition into DDR. I have not tested writing / erasing. Due to lack of clock control it won't be running in the most performant high speed mode. SD card slot has been tested for reading and booting kernels into DDR. It is also currently configured to save the u-boot environment to the SD card. USB has been tested with ASIX networking adapter to tftpboot kernels into DDR. On v2015.07-rc2 dhcp now works, and also USB mass storage are correctly enumerated. GPIO has been tested using gpio toggle GPIO4_1-3 to flash the LEDs. Basic SoC datasheet can be found here: - https://github.com/96boards/documentation/blob/master/hikey/ Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdf Board schematic can be found here: - https://github.com/96boards/documentation/blob/master/hikey/ 96Boards-Hikey-Rev-A1.pdf Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* | mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller.Peter Griffin2015-08-12-0/+8
| | | | | | | | | | | | | | | | | | This patch adds the glue code for hi6220 SoC which has 2x synopsis dw_mmc controllers. This will be used by the hikey board support in subsequent patches. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* | hisilicon: hi6220: Add a hi6220 pinmux driver.Peter Griffin2015-08-12-0/+305
| | | | | | | | | | | | | | This patch adds basic pinmux support for the hi6220 SoC, which is found on the hikey board. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* | ARM: hi6220: Add register and bitfield definition header files.Peter Griffin2015-08-12-0/+807
| | | | | | | | | | | | | | This patch adds the header files which will be used in the subsquent board / drivers to enable support for hi6220 hikey board. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* | dm: gpio: hi6220: Add a hi6220 GPIO driver model driver.Peter Griffin2015-08-12-0/+29
| | | | | | | | | | | | | | This patch adds support for the GPIO perif found on hi6220 SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* | imx28: Fix issue with GCC 5.xMåns Rullgård2015-08-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The semantics for non-static functions declared inline have changed in gcc5, causing the empty functions not to be emitted as an external symbol. Since lowlevel_init() is only referenced from start.S, it should not be declared inline at all. Reported-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Otavio Salvador <otavio@ossystems.com.br> [trini: Reword commit message] Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: keystone2: Use common definition for clk_get_rateLokesh Vutla2015-08-12-103/+167
| | | | | | | | | | | | | | | | Since all the clocks are defined common, and has the same logic to get the frequencies, use a common definition for for clk_get_rate(). Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: keystone2: Remove unsed external clocksLokesh Vutla2015-08-12-50/+13
| | | | | | | | | | | | | | | | Remove unused external clocks and make a common definition for all keystone platforms. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: keystone2: Cleanup init_pll definitionLokesh Vutla2015-08-12-5/+10
| | | | | | | | | | | | | | | | | | This is just a cosmetic change that makes the calling of pll init code looks much cleaner. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: keystone2: Use common structure for PLLsLokesh Vutla2015-08-12-51/+22
| | | | | | | | | | | | | | | | | | | | Register Base addresses are same for PLLs in all keystone platforms. If a PLL is not available, the corresponding register addresses are marked as reserved. Hence use a common definition. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: keystone2: Fix dev and arm speed detectionLokesh Vutla2015-08-12-136/+72
| | | | | | | | | | | | | | | | | | Use common devspeed and armspeed definitions. Also fix reading efuse bootrom register. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: keystone2: Cleanup PLL init codeLokesh Vutla2015-08-12-173/+199
| | | | | | | | | | | | | | | | | | | | | | There are two types of PLL for all keystone platforms: Main PLL, Secondary PLL. Instead of duplicating the same definition for each secondary PLL, have a common function which does initialization for both PLLs. And also add proper register definitions. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: keystone2: Enable CONFIG_DISPLAY_CPUINFOLokesh Vutla2015-08-12-0/+32
| | | | | | | | | | | | | | | | | | | | Add print_cpuinfo() function and enable CONFIG_DISPLAY_CPUINFO for keystone platforms, so that cpu info can be displayed during boot. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: keystone2: Cleanup SoC detectionLokesh Vutla2015-08-12-16/+26
| | | | | | | | | | | | | | | | | | Add proper register definition for JTAG ID and cleanup cpu_is_* functions. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: DRA72: disable workaround for 801819Nishanth Menon2015-08-12-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DRA72x processor variants are single core and it does not export ACP[1]. Hence, we have no source for generating an external snoop requests which appear to be key to the deadlock in DRA72x design. Since we build the same image for DRA74x and DRA72x platforms, lets runtime detect and disable the workaround (in favor of performance) on DRA72x platforms. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0438i/BABIAJAG.html Suggested-by: Richard Woodruff <r-woodruff2@ti.com> Suggested-by: Brad Griffis <bgriffis@ti.com> Reviewed-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* | ARM: DRA7/ OMAP5: implement Auxiliary Control Register configurationNishanth Menon2015-08-12-0/+7
| | | | | | | | | | | | | | | | | | | | Implement logic for ACR(Auxiliary Control Register) configuration using ROM Code smc service. Suggested-by: Richard Woodruff <r-woodruff2@ti.com> Suggested-by: Brad Griffis <bgriffis@ti.com> Reviewed-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* | ARM: Introduce erratum workaround for 801819Nishanth Menon2015-08-12-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add workaround for Cortex-A15 ARM erratum 801819 which says in summary that "A livelock can occur in the L2 cache arbitration that might prevent a snoop from completing. Under certain conditions this can cause the system to deadlock. " Recommended workaround is as follows: Do both of the following: 1) Do not use the write-back no-allocate memory type. 2) Do not issue write-back cacheable stores at any time when the cache is disabled (SCTLR.C=0) and the MMU is enabled (SCTLR.M=1). Because it is implementation defined whether cacheable stores update the cache when the cache is disabled it is not expected that any portable code will execute cacheable stores when the cache is disabled. For implementations of Cortex-A15 configured without the “L2 arbitration register slice” option (typically one or two core systems), you must also do the following: 3) Disable write-streaming in each CPU by setting ACTLR[28:25] = 0b1111 So, we provide an option to disable write streaming on OMAP5 and DRA7. It is a rare condition to occur and may be enabled selectively based on platform acceptance of risk. Applies to: A15 revisions r2p0, r2p1, r2p2, r2p3 or r2p4 and REVIDR[3] is set to 0. Note: certain unicore SoCs *might* not have REVIDR[3] not set, but might not meet the condition for the erratum to occur when they donot have ACP (Accelerator Coherency Port) hooked to ACE (AXI Coherency Extensions). Such SoCs will need the work around handled in the SoC specific manner, since there is no ARM generic manner to detect such configurations. Based on ARM errata Document revision 18.0 (22 Nov 2013) Suggested-by: Richard Woodruff <r-woodruff2@ti.com> Suggested-by: Brad Griffis <bgriffis@ti.com> Reviewed-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* | integrator: switch to DM serial portLinus Walleij2015-08-12-0/+5
| | | | | | | | | | | | | | | | This switches the Integrator boards over to using the device model for its serial ports. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | ARM: cache: implement a default weak flush_cache() functionWu, Josh2015-08-12-60/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current many cpu use the same flush_cache() function, which just call the flush_dcache_range(). So implement a weak flush_cache() for all the cpus to use. In original weak flush_cache() in arch/arm/lib/cache.c, there has some code for ARM1136 & ARM926ejs. But in the arch/arm/cpu/arm1136/cpu.c and arch/arm/cpu/arm926ejs/cache.c, there implements a real flush_cache() function as well. That means the original code for ARM1136 & ARM926ejs in weak flush_cache() of arch/arm/lib/cache.c is totally useless. So in this patch remove such code in flush_cache() and only call flush_dcache_range(). Signed-off-by: Josh Wu <josh.wu@atmel.com>
* | ARM: cache: add an empty stub function for invalidate/flush dcacheWu, Josh2015-08-12-32/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | Since some driver like ohci, lcd used dcache functions. But some ARM cpu don't implement the invalidate_dcache_range()/flush_dcache_range() functions. To avoid compiling errors this patch adds an weak empty stub function for all ARM cpu in arch/arm/lib/cache.c. And ARM cpu still can implemnt its own cache functions on the cpu folder. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | Correct License and Copyright information on few filesRuchika Gupta2015-08-12-0/+2
| | | | | | | | | | | | | | | | | | gpio.h - Added missing copyright in few files. rsa-mod-exp.h - Corrected copyright in the file. fsl_sec.h - Added missing license in files drivers/crypto/fsl/Makefile - Removed the incomplete GPLv2 license and replaced it with GPLv2+ license Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
* | arm/mach-bcm283x/mbox: Flush and invalidate dcache when using fw mailboxAlexander Stein2015-08-12-0/+12
| | | | | | | | | | | | | | | | | | | | When using dcache the setup data for the mailbox must be actually written into memory before calling into firmware. Thus flush and invalidate the memory. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
* | arm1136/arm1176: Merge cache handling codeAlexander Stein2015-08-12-53/+12
| | | | | | | | | | | | | | | | | | | | | | As both cores are similar merge the cache handling code for both CPUs to arm11 directory. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> [trini: Add hunk to arch/arm/cpu/arm1136/Makefile] Signed-off-by: Tom Rini <trini@konsulko.com>
* | arm1136: Remove dead codeAlexander Stein2015-08-12-10/+0
| | | | | | | | | | | | | | | | | | Apparently lcd_panel_disable is not defined anywhere, so no config for an arm1136 board would have set CONFIG_LCD. Remove the unused code. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
* | LG Optimus Black (P970) codename sniper supportPaul Kocialkowski2015-08-12-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LG Optimus Black (P970) codename sniper is a smartphone that was designed and manufactured by LG Electronics (LGE) and released back in 2011. It is using an OMAP3630 SoC GP version, which allows running U-Boot and the U-Boot SPL from the ground up. This port is aimed at running an Android version such as Replicant, the fully free Android distribution. However, support for upstream Linux with device-tree and common GNU/Linux distros boot commands could be added in the future. For more information about the journey to freeing this device, please read the series of blog posts at: http://code.paulk.fr/article20/a-hacker-s-journey-freeing-a-phone-from-the-ground-up-first-part Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Add CONFIG_OF_SUPPORT] Signed-off-by: Tom Rini <trini@konsulko.com>
* | omap3: Reboot mode supportPaul Kocialkowski2015-08-12-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reboot mode is written in scratchpad memory before reboot in the form of a single char, that is the first letter of the reboot mode string as passed to the reboot function. This mechanism is supported on OMAP3 both my the upstream kernel and by various TI kernels. It is up to each board to make use of this mechanism or not. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* | lpc32xx: devkit3250: add spl build supportVladimir Zapolskiy2015-08-12-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The change adds SPL build support to Timll DevKit3250 board, the generated SPL image can be uploaded over UART5, JTAG or stored on NAND. SPL is designed to load U-boot image from NAND. All new NAND chip defines in board configuration are needed by SPL NAND "simple" framework, the framework is used to reduce potentially duplicated code from LPC32xx SLC NAND driver. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
* | nand: lpc32xx: add SLC NAND controller supportVladimir Zapolskiy2015-08-12-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The change adds support of LPC32xx SLC NAND controller. LPC32xx SoC has two different mutually exclusive NAND controllers to communicate with single and multiple layer chips. This simple driver allows to specify NAND chip timings and defines custom read_buf()/write_buf() operations, because access to 8-bit data register must be 32-bit aligned. Support of hardware ECC calculation is not implemented (data correction is always done by software), since it requires a working DMA engine. The driver can be included to an SPL image. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Scott Wood <scottwood@freescale.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
* | arm: bcmcygnus: Enable Ethernet supportJiandong Zheng2015-08-12-0/+11
| | | | | | | | | | | | | | | | Enable BCM SF2 ethernet and PHY for BCM Cygnus SoC Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | arm, at91: support for sam9260 based smartweb boardHeiko Schocher2015-08-12-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add support for the at91sam9260 based board smartweb from siemens. SPL is used without serial support, as this SoC has only 4k sram for running SPL. Here a U-Boot bootlog: RomBOOT > U-Boot 2015.07-rc2-00109-g4ae828c (Jun 15 2015 - 09:31:16 +0200) CPU: AT91SAM9260 Crystal frequency: 18.432 MHz CPU clock : 198.656 MHz Master clock : 99.328 MHz Watchdog enabled DRAM: 64 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: macb0 Hit any key to stop autoboot: 0 U-Boot> Signed-off-by: Heiko Schocher <hs@denx.de>
* | spl, common, serial: build SPL without serial supportHeiko Schocher2015-08-12-4/+7
|/ | | | | | | | | This patch enables building SPL without CONFIG_SPL_SERIAL_SUPPORT support. Signed-off-by: Heiko Schocher <hs@denx.de> [trini: Ensure we build arch/arm/imx-common on mx28] Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-08-08-6/+53
|\
| * sunxi: display: Add a few extra register and constant definesHans de Goede2015-08-08-6/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a few extra sunxi display registers and constant defines. Also rename some existing defines (e.g. dropping _GCTRL) and make some more generic (e.g. dropping the 2x scaling from SUNXI_LCDC_TCON1_TIMING_V_TOTAL). This is a preparation patch for adding composite video out support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: usb-phy: Never power off the usb portsHans de Goede2015-08-08-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB devices are not really designed to get the power bounced off and on at them. Esp. USB powered harddisks do not like this. Currently we power off the USB ports both on a "usb reset" and when booting the kernel, causing the usb-power to bounce off and then back on again. This patch removes the powering off calls, fixing the undesirable power bouncing. Note this requires some special handling for the OTG port: 1) We must skip the external vbus check if we've already enabled our own vbus to avoid false positives 2) If on an usb reset we no longer detect that the id-pin is grounded, turn off vbus as that means an external vbus may be present now Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: nand: Add pinmux and clock settings for NAND supportKarol Gugala2015-08-08-0/+3
| | | | | | | | | | | | | | | | | | | | To enable NAND flash in sunxi SPL, pins 0-6, 8-22 and 24 on port C are configured. Signed-off-by: Karol Gugala <kgugala@antmicro.com> Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | arm: socfpga: misc: Add support for printing FPGA typeDinh Nguyen2015-08-08-2/+65
| | | | | | | | | | | | | | | | | | | | Add code which uses the new functions for obtaining FPGA ID from the scan manager. This new code prints the FPGA model attached to the SoCFPGA during boot and sets environment variable "fpgatype", which can be used to determine the FPGA model in U-Boot scripts. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Marek Vasut <marex@denx.de>
* | arm: socfpga: scan: Add code to get FPGA IDDinh Nguyen2015-08-08-0/+56
| | | | | | | | | | | | | | Add code to get the FPGA type for Altera's SoCFPGA family of FPGA. The code uses the scan manager to send jtag pulses that will return the FPGA ID. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | arm: socfpga: scan: Factor out IO chain programmingMarek Vasut2015-08-08-71/+42
| | | | | | | | | | | | | | | | Factor out the code which sends JTAG instruction followed by data into separate function to tidy the code up a little. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | arm: socfpga: scan: Clean up horrible macrosMarek Vasut2015-08-08-72/+17
| | | | | | | | | | | | | | | | | | | | | | Clean up the horrible macros present in the scan_manager.h . Firstly, the function scan_mgr_io_scan_chain_prg() is static, yet all the macros are used only within it, thus there is no point in having them in the header file. Moreover, the macros are just making the code much less readable, so remove them instead. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | arm: socfpga: scan: Introduce generic JTAG accessorMarek Vasut2015-08-08-41/+63
| | | | | | | | | | | | | | | | | | Introduce generic function for accessing the JTAG scan chains in the SCC manager. Make use of this function throughout the SCC manager to replace the ad-hoc writes to registers and make the code less cryptic. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | arm: socfpga: scan: Clean up scan_chain_engine_is_idle()Marek Vasut2015-08-08-28/+34
| | | | | | | | | | | | | | | | | | | | Rework this function so it's clear that it is only polling for certain bits to be cleared. Add kerneldoc. Fix it's return value to be either 0 on success and -ETIMEDOUT on error and propagate this through the scan manager code. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | ddr: altera: sequencer: Wrap misc remaining macrosMarek Vasut2015-08-08-0/+17
| | | | | | | | | | | | | | | | | | | | | | Introduce structure socfpga_sdram_misc_config to wrap the remaining misc configuration values in board file. Again, introduce a function, socfpga_get_sdram_misc_config(), which returns this the structure. This is almost the final step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | ddr: altera: sequencer: Wrap IO_* macrosMarek Vasut2015-08-08-0/+19
| | | | | | | | | | | | | | | | | | | | | | Introduce structure socfpga_sdram_io_config to wrap the IO configuration values in board file. Introduce socfpga_get_sdram_io_config() function, which returns this the structure. This is another step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | ddr: altera: sequencer: Wrap RW_MGR_* macrosMarek Vasut2015-08-08-0/+64
| | | | | | | | | | | | | | | | | | | | | | Introduce structure socfpga_sdram_rw_mgr_config to wrap the RW manager configuration values in board file. Introduce a complementary function, socfpga_get_sdram_rwmgr_config(), which returns this the structure. This is another step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | ddr: altera: sequencer: Wrap ac_rom_init and inst_rom_initMarek Vasut2015-08-08-0/+3
| | | | | | | | | | | | | | | | | | | | Introduce two wrapper functions, socfpga_get_seq_ac_init() and socfpga_get_seq_inst_init() to avoid direct inclusion of the sequencer_auto_ac_init.h and sequencer_auto_inst_init.h QTS generated files. This reduces namespace pollution again. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | ddr: altera: sequencer: Clean up mach/sdram.hMarek Vasut2015-08-08-3/+1
| | | | | | | | | | | | | | | | Zap non-existent functions and place function prototypes at the beginning of the header file. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | ddr: altera: sdram: Introduce socfpga_sdram_get_config()Marek Vasut2015-08-08-0/+42
| | | | | | | | | | | | | | | | | | | | Introduce socfpga_sdram_get_config() function implement in a board file, which returns the socfpga_sdram_config structure. This is the last step in cleaning up the socfpga_mmr_init_full(), but not the last step which allows removing the inclusion of sdram.h from drivers/ddr/altera/sdram.c thus far. Signed-off-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-14 23:07:27 +0000