summaryrefslogtreecommitdiff
path: root/arch/arm
Commit message (Collapse)AuthorAgeLines
* sunxi: Move remaining PSCI assembly code to CChen-Yu Tsai2016-07-15-54/+6
| | | | | | | | | | | | This patch finishes the rewrite of sunxi specific PSCI parts into C code. The assembly-only stack setup code has been factored out into a common function for ARMv7. The GIC setup code can be renamed as psci_arch_init. And we can use an empty stub function for psci_text_end. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: PSCI: Split out common stack setup code from psci_arch_initChen-Yu Tsai2016-07-15-45/+25
| | | | | | | | | | | | | | | Every platform has the same stack setup code in assembly as part of psci_arch_init. Move this out into a common separate function, psci_stack_setup, for all platforms. This will allow us to move the remaining parts of psci_arch_init into C code, or drop it entirely. Also provide a stub no-op psci_arch_init for platforms that don't need their own specific setup code. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add defconfig and dts file for the Orange Pi Lite SBCHans de Goede2016-07-15-0/+179
| | | | | | | | | | | The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Sync sun8i-h3-orangepi-plus.dts with upstreamHans de Goede2016-07-15-100/+37
| | | | | | | | This enables extra USB controllers which enable use of the 3rd USB port on the new Orange Pi Plus 2E variant. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Use BROM stored boot_media value to determine our boot-sourceHans de Goede2016-07-15-24/+11
| | | | | | | | | Now that we know that the BROM stores a value indicating the boot-source at the beginning of SRAM, use that instead of trying to recreate the BROM's boot probing. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* net: Add EMAC driver for H3/A83T/A64 SoCs.Amit Singh Tomar2016-07-15-2/+101
| | | | | | | | | | | This patch add EMAC driver support for H3/A83T/A64 SoCs. Tested on Pine64(A64-External PHY) and Orangepipc(H3-Internal PHY). BIG Thanks to Andre for providing some of the DT code. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: FEL - Add the ability to recognize and auto-import uEnv-style dataBernhard Nortmann2016-07-15-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | The patch converts one of the "reserved" fields in the sunxi SPL header to a fel_uEnv_length entry. When booting over USB ("FEL mode"), this enables the sunxi-fel utility to pass the string length of uEnv.txt compatible data; at the same time requesting that this data be imported into the U-Boot environment. If parse_spl_header() in the sunxi board.c encounters a non-zero value in this header field, it will therefore call himport_r() to merge the string (lines) passed via FEL into the default settings. Environment vars can be changed this way even before U-Boot will attempt to autoboot - specifically, this also allows overriding "bootcmd". With fel_script_addr set and a zero fel_uEnv_length, U-Boot is safe to assume that data in .scr format (a mkimage-type script) was passed at fel_script_addr, and will handle it using the existing mechanism ("bootcmd_fel"). Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Support booting from SPI flashSiarhei Siamashka2016-07-15-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allwinner devices support SPI flash as one of the possible bootable media type. The SPI flash chip needs to be connected to SPI0 pins (port C) to make this work. More information is available at: https://linux-sunxi.org/Bootable_SPI_flash This patch adds the initial support for booting from SPI flash. The existing SPI frameworks are not used in order to reduce the SPL code size. Right now the SPL size grows by ~370 bytes when CONFIG_SPL_SPI_SUNXI option is enabled. While there are no popular Allwinner devices with SPI flash at the moment, testing can be done using a SPI flash module (it can be bought for ~2$ on ebay) and jumper wires with the boards, which expose relevant pins on the expansion header. The SPI flash chips themselves are very cheap (some prices are even listed as low as 4 cents) and should not cost much if somebody decides to design a development board with an SPI flash chip soldered on the PCB. Another nice feature of the SPI flash is that it can be safely accessed in a device-independent way (since we know that the boot ROM is already probing these pins during the boot time). And if, for example, Olimex boards opted to use SPI flash instead of EEPROM, then they would have been able to have U-Boot installed in the SPI flash now and boot the rest of the system from the SATA hard drive. Hopefully we may see new interesting Allwinner based development boards in the future, now that the software support for the SPI flash is in a better shape :-) Testing can be done by enabling the CONFIG_SPL_SPI_SUNXI option in a board defconfig, then building U-Boot and finally flashing the resulting u-boot-sunxi-with-spl.bin binary over USB OTG with a help of the sunxi-fel tool: sunxi-fel spiflash-write 0 u-boot-sunxi-with-spl.bin The device needs to be switched into FEL (USB recovery) mode first. The most suitable boards for testing are Orange Pi PC and Pine64. Because these boards are cheap, have no built-in NAND/eMMC and expose SPI0 pins on the Raspberry Pi compatible expansion header. The A13-OLinuXino-Micro board also can be used. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Revert "armv8: Enable CPUECTLR.SMPEN for coherency"Tom Rini2016-07-14-8/+0
| | | | | | | | | Upon further review this breaks most other platforms as we need to check what core we're running on before touching it at all. This reverts commit d73718f3236c520a92efa401084c658e6cc067f3. Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-07-11-11/+143
|\
| * ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHzVignesh R2016-07-09-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | According to Data Manual(SPRS915P) of AM57x, TI QSPI controller on DRA74(rev 1.1+)/DRA72 EVM can support up to 64MHz in MODE-0, whereas MODE-3 is limited to 48MHz. Hence, switch to MODE-0 for better throughput. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: K2G: Add support for QSPI controllerVignesh R2016-07-09-0/+59
| | | | | | | | | | | | | | | | | | | | | | K2G SoC has a Cadence QSPI controller to communicate with NOR flash devices. Add DT nodes to support the same. Also, K2G EVM has a s25fl512s flash connect to QSPI bus at CS 0. Add nor flash slave node for the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2g: add support for Davinci SPI controllerVignesh R2016-07-09-0/+71
| | | | | | | | | | | | | | | | | | | | | | K2G SoC has 4 SPI instances that are compatible with davinci_spi controller(present on previous generation of Keystone2 devices). Add DT nodes for the same. K2G EVM has a N25Q128A13 SPI NOR flash connected on SPI-1. Add DT bindings for the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2l: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2e: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2hk: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: keystone2: add SPI aliases for davinci SPI nodesVignesh R2016-07-09-0/+3
| | | | | | | | | | | | | | | | | | Add aliases for SPI nodes in order for it to be probed by the DM framework. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | dm: mmc: rockchip: Enable CONFIG_DM_MMC_OPS for all boardsSimon Glass2016-07-11-0/+1
| | | | | | | | | | | | | | Enable this option to move rockchip over to use driver model for MMC operations. Signed-off-by: Simon Glass <sjg@chromium.org>
* | rockchip: Use 'select' instead of defaults in KconfigSimon Glass2016-07-11-27/+10
| | | | | | | | | | | | | | | | Rockchip uses driver model for all subsystems. Specify this in the arm Kconfig rather than as defaults in the Rockchip Kconfig. This means that boards cannot turn these options off, which seems correct. Signed-off-by: Simon Glass <sjg@chromium.org>
* | armv8: Enable CPUECTLR.SMPEN for coherencyMingkai Hu2016-07-08-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For A53, data coherency is enabled only when the CPUECTLR.SMPEN bit is set. The SMPEN bit should be set before enabling the data cache. If not enabled, the cache is not coherent with other cores and data corruption could occur. For A57/A72, SMPEN bit enables the processor to receive instruction cache and TLB maintenance operations broadcast from other processors in the cluster. This bit should be set before enabling the caches and MMU, or performing any cache and TLB maintenance operations. Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | arm: Fix setjmp (again)Alexander Graf2016-07-08-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | Commit e677724 (arm: Fix setjmp) added code to fix compilation of the setjmp code path with thumv1. Unfortunately it missed a constraint that the adr instruction can only refer to 4 byte aligned offsets. So this patch adds the required alignment hooks to make compilation work again even when setjmp doesn't happen to be 4 byte aligned. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Tom Rini <trini@konsulko.com>
* | video: tegra: Move to using simple-panel and pwm-backlightSimon Glass2016-07-05-72/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have standard drivers for panels and backlights which can do most of the work for us. Move the tegra20 LCD driver over to use those instead of custom code. This patch includes device tree changes for the nvidia boards. I have only been able to test seaboard. If this patch is applied, these boards will also need to be synced with the kernel, and updated to use display-timings: - colibri - medcom-wide - paz00 - tec Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: dts: Sync tegra20 device tree files with LinuxSimon Glass2016-07-05-73/+2154
|/ | | | | | | | Sync everything except the display panel, which will come in a future patch. One USB port is left disabled since we don't want to support it in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* sunxi: Add defconfig and DTS file for Allwinner R16 EVB (Parrot)Quentin Schulz2016-07-02-1/+350
| | | | | | | | | | | | | | | The Parrot Board is an evaluation board with an Allwinner R16 (assumed to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2 controllable buttons, an LVDS port with separated backlight and capacitive touch panel ports, an audio/microphone jack, a camera CSI port, 2 sets of 22 GPIOs and an accelerometer. The DTS file is identical to the one submitted to the upstream kernel. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add missing boot_media fields in the SPL headerOlliver Schinagl2016-07-02-0/+2
| | | | | | | | | | | Commit b19236fd1 ("sunxi: Increase SPL header size to 64 bytes to avoid code corruption") Added defines for MMC0 and SPI as boot identification. After verifying on an OLinuXino Lime2 with NAND and eMMC, the expected values have been confirmed and added to spl.h Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: uniphier: add external IRQ setup codeMasahiro Yamada2016-07-02-0/+44
| | | | | | | | I will carry this work-around until it is cared in the kernel. This looks up the AIDET node and sets up a register to handle active low interrupt signals. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: dts: uniphier: add AIDET nodesMasahiro Yamada2016-07-02-0/+40
| | | | | | | The AIDET (ARM Interrupt Detector Add-on Circuit) is a kind of syscon block related with the interrupt controller. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: dts: uniphier: sync Device Trees with upstream LinuxMasahiro Yamada2016-07-02-138/+99
| | | | | | I periodically sync Device Trees for better maintainability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: fix typo "talbe"Masahiro Yamada2016-06-30-1/+1
| | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-06-28-124/+21
|\
| * armv8: dts: fsl: Remove cpu nodes from Layerscape DTSIsAbhimanyu Saini2016-06-28-105/+0
| | | | | | | | | | | | | | | | | | | | | | | | Currently layescape SoCs are not using cpu nodes. So removing them in favour of compatibly with similar SoCs that have different cores like LS2080A and LS2088A. This has been tested on LS2080AQDS, LS1043ARDB, LS1012ARDB. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Append "A" in SoC name for ARM based SoCsPrabhakar Kushwaha2016-06-28-16/+16
| | | | | | | | | | | | | | | | | | | | | | Freescale ARMv8 SoC name ends with "A" to represent ARM SoCs. like LS2080A, LS1043A, LS1012A. So append "A" to SoC names. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/fsl_lsch2: Correct the cores frequency initializationHou Zhiqiang2016-06-24-3/+5
| | | | | | | | | | | | | | | | The register CLKCNCSR controls the frequency of all cores in the same cluster. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | arm: at91: taurus/axm: add DM and DTS supportHeiko Schocher2016-06-26-0/+124
| | | | | | | | | | | | | | | | | | | | add DM and DTS support for the at91 based siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: at91: smartweb: add DM and DTS supportHeiko Schocher2016-06-26-1/+116
| | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: at91: dts: Bring in dts files for AT91SAM9G20 and SAM9260Heiko Schocher2016-06-26-0/+3012
| | | | | | | | | | | | | | | | | | Add this files from Linux v4.6-rc5 66b8a424d: [workqueue: fix ghost PENDING flag while doing MQ IO] Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Andreas Bießmann <andreas@biessmann.org>
* | corvus DTS / DM supportHeiko Schocher2016-06-26-1/+115
| | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebase on current ToT, don't delete gurnard DTB creation] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: at91: add CONFIG_AT91SAM9M10G45Heiko Schocher2016-06-26-12/+14
| | | | | | | | | | | | | | add support for CONFIG_AT91SAM9M10G45. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* | ARM: at91: Don't invoke spl_boot_device() twiceMarek Vasut2016-06-26-1/+1
| | | | | | | | | | | | | | | | | | | | Since the spl_boot_mode() is now passed the boot device to boot from, make use of it instead of inquiring for the boot device again. This allows board_boot_order() to function correctly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* | common: Pass the boot device into spl_boot_mode()Marek Vasut2016-06-26-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPL code already knows which boot device it calls the spl_boot_mode() on, so pass that information into the function. This allows the code of spl_boot_mode() avoid invoking spl_boot_device() again, but it also lets board_boot_order() correctly alter the behavior of the boot process. The later one is important, since in certain cases, it is desired that spl_boot_device() return value be overriden using board_boot_order(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [add newly introduced zynq variant] Signed-aff-by: Andreas Bießmann <andreas@biessmann.org>
* | board/BuR: rename kwb board to brxre1Hannes Schmelzer2016-06-24-3/+3
| | | | | | | | | | | | | | Rename B&R kwb board to brxre1 Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board/BuR: rename tseries board to brppt1Hannes Schmelzer2016-06-24-3/+3
| | | | | | | | | | | | | | Rename B&R tseries board to brppt1 Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: bcm235xx: update clock frameworkSteve Rae2016-06-24-5/+5
| | | | | | | | | | | | | | | | The handling of the "usage counter" is incorrect, and the clock should only be disabled when transitioning from 1 to 0. Reported-by: Chris Brand <chris.brand@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
* | arm: bcm235xx: fix kps ccuChris Brand2016-06-24-5/+1
| | | | | | | | | | | | | | The Kona Peripheral Slave CCU has 4 policy mask registers, not 8. Signed-off-by: Chris Brand <chris.brand@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
* | arm: bcm235xx: implement the boot0 hook codeSteve Rae2016-06-24-0/+15
| | | | | | | | | | | | Choose the Kconfig boot0 hook option and implement the required code. Signed-off-by: Steve Rae <srae@broadcom.com>
* | ARM: armv7: refactor Makefile slightlyMasahiro Yamada2016-06-24-9/+2
| | | | | | | | | | | | Use Kbuild standard style where possible. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: move #ifdef to match the error handling codeMasahiro Yamada2016-06-24-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | Match the #ifdef ... #endif and the code, ret = do_something(); if (ret) return ret; This will make it easier to add more #ifdef'ed code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | arm64: optimize smp_kick_all_cpusMasahiro Yamada2016-06-24-3/+1
| | | | | | | | | | | | | | | | gic_kick_secondary_cpus can directly return to the caller of smp_kick_all_cpus. We do not have to use x29 register here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | board: amlogic: Rename folder for Amlogic boardsCarlo Caione2016-06-24-1/+1
| | | | | | | | | | | | | | | | | | s/hardkernel/amlogic/ to have a single place for all the amlogic-based boards. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com>
* | omap3: bugfix in timer on rolloverDaniel Gorsulowski2016-06-24-1/+1
|/ | | | Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
generated by cgit v1.1 at 2024-11-09 20:47:44 +0000