summaryrefslogtreecommitdiff
path: root/arch/arm
Commit message (Collapse)AuthorAgeLines
* sunxi: usb_phy: Swap check for disconnect thresholdHans de Goede2015-06-04-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Before this commit the code for determining the disconnect threshold was checking for sun4i or sun6i assuming that those where the exception and that newer SoCs use a disconnect threshold of 2 like sun7i does. But it turns out that newer SoCs actually use a disconnect threshold of 3 and sun5i and sun7i are the exceptions, so check for those instead. Here are the settings from the various Allwinner SDK sources: sun4i-a10: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun5i-a13: USBC_Phy_Write(usbc_no, 0x2a, 2, 2); sun6i-a31: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun7i-a20: USBC_Phy_Write(usbc_no, 0x2a, 2, 2); sun8i-a23: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun8i-h3: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun9i-a80: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); Note this commit makes no functional changes for sun4i - sun7i, and changes the disconnect threshold for sun8i to match what Allwinner uses. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2015-06-01-0/+26
|\
| * arm: rmobile: alt: Update to QoS revision 0.31 and 0.321Nobuhiro Iwamatsu2015-06-01-1/+5
| | | | | | | | | | | | | | | | This updates r8a7794 QoS to revision 0.31 for ES1 and revision 0.321 for ES2. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * arm: rmobile: gose: Update to QoS revision 0.311Nobuhiro Iwamatsu2015-06-01-1/+1
| | | | | | | | | | | | | | | | This updates r8a7793 QoS to revision 0.311. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * arm: rmobile: koelsch: Update to QoS revision 0.411Nobuhiro Iwamatsu2015-06-01-1/+1
| | | | | | | | | | | | | | | | This updates r8a7791 QoS to revision 0.411. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * arm: rmobile: lager: Update to QoS revision 0.973Nobuhiro Iwamatsu2015-06-01-0/+22
| | | | | | | | | | | | | | | | | | This updates r8a7790 QoS to revision 0.973. This commit can changed from KConfig to fit contents of the QoS. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2015-05-30-146/+98
|\ \
| * | ARM: UniPhier: add pin mux setting for NAND CS1 of PH1-Pro4Masahiro Yamada2015-05-31-0/+2
| | | | | | | | | | | | | | | | | | | | | The chip select 1 of the NAND controller is available if you want to use, although the pins are shared with UART port 2. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: UniPhier: fix pin mux setting for USB port 2 of PH1-sLD8Masahiro Yamada2015-05-31-2/+2
| | | | | | | | | | | | | | | | | | The register value should be 1, not 4. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: UniPhier: update DDR PHY register map for PH1-Pro5Masahiro Yamada2015-05-31-4/+7
| | | | | | | | | | | | | | | | | | | | | PH1-Pro5 includes a newer version of DDR PHY IP. Some registers have been added to the reserved areas. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: UniPhier: set MACH_PH1_PRO4 as default SoCMasahiro Yamada2015-05-31-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One disadvantage of commit a26cd04920dc (arch: Make board selection choices optional) is that Kconfig could create such an insane .config file that no board is selected. As PH1-Pro4 is the main stream of UniPhier SoC family, rip off the "optional" again in favor of PH1-Pro4 as the default SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: UniPhier: remove meaningless CONFIG_SPL_BUILD ifdefsMasahiro Yamada2015-05-31-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | This file is only built for SPL. These ifdef conditionals are unnecessary because UniPhier platform now supports UART on SPL. Show appropriate messages on error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: UniPhier: remove unnecessary cache coherency codeMasahiro Yamada2015-05-31-23/+1
| | | | | | | | | | | | | | | | | | | | | | | | Cache coherency for SMP is cared by Linux. In U-Boot, the secondary CPU(s) are just sleeping. Nothing in memory is shared with the primary CPU. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: UniPhier: use 32 bit register access for debug UART settingMasahiro Yamada2015-05-31-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | For the same reason as commit d0c47b3ef7c5 (serial: UniPhier: use 32 bit register access), use "str" instead of "strb" for the LCR register setting. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: UniPhier: update the vendor name of UniPhier in KconfigMasahiro Yamada2015-05-31-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | The business for UniPhier Soc family has been transferred from Panasonic Corporation to Socionext Inc. Update the SoC select menu in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: UniPhier: replace <asm/io.h> with <linux/io.h>Masahiro Yamada2015-05-31-104/+76
| |/ | | | | | | | | | | | | In the Linux coding style, it is recommended to include <linux/io.h> rather than <asm/io.h>. Follow this trend. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: sunxi: Share sun6i PSCI backend with sun8iChen-Yu Tsai2015-05-29-0/+5
| | | | | | | | | | | | | | | | | | sun8i can share the PSCI backend with sun6i. Only difference is sun8i does not have CPU power clamp controls. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | ARM: sunxi: Add sun6i specific PSCI implementationChen-Yu Tsai2015-05-29-0/+277
| | | | | | | | | | | | | | | | | | This adds PSCI support for sun6i. So far it only supports the PWR_ON method. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | ARM: sunxi: Make PSCI code sun7i specificChen-Yu Tsai2015-05-29-1/+1
| | | | | | | | | | | | | | | | | | | | | | The PSCI code only works for sun7i. Rename it with _sun7i suffix, and build only if building for sun7i. This paves the way for adding PSCI support for other platforms. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | ARM: sunxi: Document registers in PSCI codeChen-Yu Tsai2015-05-29-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | The PSCI CPU_ON code accesses quite a few registers. Document their names to make it easier to cross reference. Also explain "lock cpu" and "unlock cpu" as enabling/disabling debug access. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memoryDaniel Kochmański2015-05-29-2/+81
| | | | | | | | | | | | | | | | | | | | | | This commit adds support to the sunxi SPL to load u-boot from the internal NAND. Note this only adds support to access the boot partitions to load u-boot, full NAND support to load the kernel, etc. from the nand data partition will come later. Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Match sun4i, sun6i, sun9i CCI definitions for NAND and DMARoy Spliet2015-05-29-3/+10
| | | | | | | | | | | | | | | | | | Make sure definitions for NAND clock and DMA gate bits are the same across boards. Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Add DMA definitionsRoy Spliet2015-05-29-0/+84
| | | | | | | | | | | | Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sun9i: Basic sun9i (A80) supportHans de Goede2015-05-29-0/+10
| | | | | | | | | | | | | | Add initial sun9i (A80) support, only uart + mmc are supported for now. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sunxi: Remove support for building "old-fashioned" fel binariesHans de Goede2015-05-29-8/+0
| | | | | | | | | | | | | | | | | | | | The latest versions of the fel tool support loading normal u-boot builds directly, and this is now the preferred way to use the fel boot method. This commit removes support for the old deprecated standalone fel builds. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sunxi: Use axp221 sid on a33Hans de Goede2015-05-29-5/+3
|/ | | | | | | | | Unlike the A31 and the A23 the A33 actually has a SID inside the SoC again, but sid[3] is 0 (at least on some SoCs), so it is better to use the axp221 sid. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* ARMv7M: add STM32F1 supportMatt Porter2015-05-28-0/+782
| | | | | | Add ARMv7M STM32F1 support including clocks, timer, gpio, and flash. Signed-off-by: Matt Porter <mporter@konsulko.com>
* common/cmd_boot: keep ARM v7M in thumb mode during do_go_exec()Matt Porter2015-05-28-0/+45
| | | | | | | | On ARM v7M, the processor will return to ARM mode when executing a blx instruction with bit 0 of the address == 0. Always set it to 1 to stay in thumb mode. Signed-off-by: Matt Porter <mporter@konsulko.com>
* ARM: bcm283x: Switch to generic timerMarek Vasut2015-05-28-59/+1
| | | | | | | | | | | Switch to generic timer implementation from lib/time.c . This also fixes a signed overflow which was in __udelay() implementation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tyler Baker <tyler.baker@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* ARM: bcm283x: Reorder timer.hMarek Vasut2015-05-28-5/+10
| | | | | | | | Reorder the timer.h file so it can be included from board config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tyler Baker <tyler.baker@linaro.org>
* ARM: bcm283x: Repair wdog.hMarek Vasut2015-05-28-2/+2
| | | | | | | | Trivially fix the include check in wdog.h. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tyler Baker <tyler.baker@linaro.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-05-26-46/+202
|\
| * arm, imx6: add support for aristainetos2 boardHeiko Schocher2015-05-26-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add support for imx6dl based aristainetos2 board U-Boot 2015.04-rc5-00066-g60f6ed4 (Apr 10 2015 - 08:46:27) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: WDOG Board: aristaitenos2 Watchdog enabled I2C: ready DRAM: 1 GiB NAND: 1024 MiB MMC: FSL_SDHC: 0 SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB Display: lg4573 (480x800) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 => Signed-off-by: Heiko Schocher <hs@denx.de>
| * i2c, mxc: rework i2c base address names for different SoCsHeiko Schocher2015-05-26-7/+7
| | | | | | | | | | | | | | rework and unify i2c address names for different SoCs, which use the mxc_i2c driver. Signed-off-by: Heiko Schocher <hs@denx.de>
| * arm, imx6, i2c: add I2C4 for MX6DLHeiko Schocher2015-05-26-12/+29
| | | | | | | | | | | | add I2C4 modul for MX6DL based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
| * imx: dma: correct MXS_DMA_ALIGNMENTPeng Fan2015-05-26-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should not hardcode MXS_DMA_ALIGNMENT to 32, since we can not guarantee that socs' cache line size is 32 bytes. If on chips whose cache line size is 64 bytes, error occurs: " NAND: ERROR: v7_dcache_inval_range - start address is not aligned - 0xbdf1d1a0 ERROR: v7_dcache_inval_range - stop address is not aligned - 0xbdf1f4a0 ERROR: v7_dcache_inval_range - start address is not aligned - 0xbdf1d1a0 " Align MXS_DMA_ALIGNMENT with ARCH_DMA_MINALIGN whose value is same to CONFIG_SYS_CACHELINE_SIZE if CONFIG_SYS_CACHELINE_SIZE defined. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| * wandboard: Switch to SPL supportFabio Estevam2015-05-21-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we need to build one U-boot image for each of the wandboard variants: quad, dual-lite and solo. By switching to SPL we can support all these variants with a single binary, which is very convenient. Based on the work from Richard Hu. Tested kernel booting on the three boards. Signed-off-by: Richard Hu <hakahu@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Vagrant Cascadian <vagrant@aikidev.net> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: mx6: add display of CPU temperature grade in print_cpuinfo()Tim Harvey2015-05-19-4/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_IMX6_THERMAL is defined print the CPU temperature grade info along with the current temperature. Before: CPU: Temperature 42 C After: CPU: Automotive temperature grade (-40C to 125C) at 42C CPU: Industrial temperature grade (-40C to 105C) at 42C CPU: Extended Commercial temperature grade (-20C to 105C) at 42C Cc: Stefan Roese <sr@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Jon Nettleton <jon.nettleton@gmail.com> Cc: Jason Liu <r64343@freescale.com> Cc: Ye Li <b37916@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Peng Fan <b51431@freescale.com> Tested-by: Nikolay Dimitrov <picmaster@mail.bg> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTPTim Harvey2015-05-19-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MX6 has a temperature grade defined by OCOTP_MEM0[7:6] which is at 0x480 in the Fusemap Description Table in the reference manual. Return this value as well as min/max temperature based on the value. Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the their Fusemap Description Table however Freescale has confirmed that these eFUSE bits match the description within the IMX6DQRM and that they will be added to the next revision of the respective reference manuals. This has been tested with IMX6 Automative and Industrial parts. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: mx6: display max cpu frequency in print_cpuinfo()Tim Harvey2015-05-19-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Display the max CPU frequency as well as the current running CPU frequency if the max CPU frequency is available and differs from the current CPU frequency. Before: CPU: Freescale i.MX6Q rev1.2 at 792 MHz After - using an 800MHz IMX6DL (running at its max) CPU: Freescale i.MX6DL rev1.1 at 792 MHz After - using a 1GHz IMX6Q (not running at its max): CPU: Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz) Cc: Stefan Roese <sr@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Jon Nettleton <jon.nettleton@gmail.com> Cc: Jason Liu <r64343@freescale.com> Cc: Ye Li <b37916@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Peng Fan <b51431@freescale.com> Tested-by: Nikolay Dimitrov <picmaster@mail.bg> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed grade from OTPTim Harvey2015-05-19-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IMX6 has four different speed grades determined by eFUSE SPEED_GRADING indicated by OCOTP_CFG3[17:16] which is at 0x440 in the Fusemap Description Table. Return this frequency so that it can be used elsewhere. Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the their Fusemap Description Table however Freescale has confirmed that these eFUSE bits match the description within the IMX6DQRM and that they will be added to the next revision of the respective reference manuals. These have been tested with IMX6 Quad/Solo/Dual-light 800Mhz and 1GHz grades. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * mx6: add OTP bank1 registersTim Harvey2015-05-19-0/+19
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * arm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit specifiedTim Harvey2015-05-19-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit fa8b7d66f49f0c7bd41467fe78f6488d8af6976a introduced fast-exit support to the MMDC however enabling it on the DDR3 got missed. Make sure we enable it on the DDR3 as well. Gateworks uses Micron memory as well as Winbond in MX6. We have found in testing that we need to enable fast-exit for Winbond stability. Gateworks boards are currently the only boards using the MX6 SPL and enabling fast-exit mode. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * arm/imx-common: Fix warning 'get_reset_cause' defined but not usedPrabhakar Kushwaha2015-05-19-0/+2
| | | | | | | | | | | | | | | | | | | | | | Fix below warning arch/arm/imx-common/cpu.c:29:14: warning: ‘get_reset_cause’ defined but not used static char *get_reset_cause(void) Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * imx: mx6sx enable SION for i2c pin muxPeng Fan2015-05-19-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | Enable IOMUX_CONFIG_SION for all I2C pin mux settings, otherwise we will get erros when doing i2c operations. error log like the following: " wait_for_sr_state: failed sr=81 cr=a0 state=2020 i2c_init_transfer: failed for chip 0xb retry=1 " Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* | ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70xMasahiro Yamada2015-05-25-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to licensing issues, the files ps7_init.c/h are not able to be distributed with U-Boot source code. Recent Xilinx tools also provide the GPL variants (ps7_init_gpl.c/h), compatible with U-Boot license. Prior to this commit, we had to copy ps7_init files into board/xilinx/zynq/ before the compile. To be more user-friendly, let's include ps7_init_gpl.c/h for Zedboard, MicroZed, ZC702, ZC706. These init code have been taken from the hwplatform_templates directory of Xilinx SDK 2014.4. You can still use customized ps7_init_gpl.c/h by enabling CONFIG_ZYNQ_CUSTOM_INIT. The recommended directory for storing them is now board/xilinx/zynq/custom_hw_platform, but board/xilinx/zynq is still supported for backward compatibility. The latter emits a warning message to prompt users to gradually switch to the new directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | ARM: zynq: add separate configuration for ZC702 and ZC706Masahiro Yamada2015-05-25-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to this commit, ZC702 and ZC706 shared the same configuration and were built as follows: ZC702: make zynq_zc70x_defconfig && make ZC706: make zynq_zc70x_defconfig && make DEVICE_TREE=zynq-zc706 This commit introduces separate configuration for them, which makes the next commit much easier. Going forward, the recommended build commands are: ZC702: make zynq_zc702_defconfig && make ZC706: make zynq_zc706_defconfig && make Although the old work flow is still supported, CONFIG_TARGET_ZC70X has been marked as deprecated. If used, the warning message is shown to prompt users to switch to the new scheme. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | zynq: Use system timer implementation instead of ourMichal Simek2015-05-25-83/+1
| | | | | | | | | | | | | | Don't use error-prone arch timer code and instead use system timer implementation to simplify our code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-05-22-146/+0
|\ \
| * | arm/ls1021a: Remove ccsr_ddr from immap_ls102xa.hYork Sun2015-05-20-146/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | ccsr_ddr structure is already defined in fsl_immap.h. Remove this duplicated define. Move fixed timing into ls1021atwr.h. Signed-off-by: York Sun <yorksun@freescale.com> CC: Alison Wang <alison.wang@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com>
generated by cgit v1.1 at 2024-11-07 16:44:40 +0000