| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Shutdown VDDPU and PCIE phy to save power.
For PCIE, the i.MX6SL and i.MX6UL does not have this module,
so don't need it.
For VDDPU, the i.MX6UL does not have GPU, does not need it. And on
i.MX6QP there is narrow window that PRE driver is ready but GPU driver probe later,
and the later GPU driver turn on PU may cause 'PRE hang' issue. To simplify
thing, do not turn off PU in u-boot.
Reference:
commit: 6b0787b726e2ff32210d742d93ecd3f4bb2ae402
commit: 4bd0032c0eba50fa0caf43f50f735a3cfbe36a8d
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 5c96ea91fe89c67991c929c9b39ffaa940d28391)
|
|
|
|
|
|
|
|
|
|
|
| |
As M4 is sourcing UART clk from OSC, to make UART work
when M4 is enabled, need to select OSC as clk parent,
24M OSC is enough for debug UART in uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Anson Huang <b20788@freescale.com>
(cherry picked from commit b5e1b393192099e91c5cb75b69291c87eacb9f60)
(cherry picked from commit 416dea861c2dd5a197bf2354069bba8415a20b12)
|
|
|
|
|
|
|
|
|
|
|
| |
Add gis module, current gis is support vadc input.
Add power down function to lcdif driver.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793)
(cherry picked from commit a31dcdafb0963381e7213c59f79a340ef27ec2e2)
(cherry picked from commit 02dfe2e4af5f51d39a51542fb0e81f93faf505bc)
|
|
|
|
|
|
|
|
|
|
|
|
| |
When gis enable in uboot, the CSI0 input mux select setting
to vadc module, clean the bit when gis disabled.
Signed-off-by: Sandor Yu <R01008@freescale.com>
(cherry picked from commit ae66b17b7da3be50dc81ca636b67e8e879f52e26)
(cherry picked from commit c83fd326e810c2fff44b8b02e78406d5d04c977c)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit d6e803ed5f51d31ebe7e9d178aa11f16401b7fc8)
(cherry picked from commit 2065b417ae93436736e49ca66b66aa0791d003fe)
|
|
|
|
|
|
|
|
|
|
|
| |
Add vadc power up/down function.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 96d990ef754a879f6ca9da4adf6e0be3d21cdc51)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 01b88201aa86bef26a4254ac43aff90e99fd2c06)
(cherry picked from commit d50b53f138dd3b4c463c80ac8e14f41ac0fdd415)
|
|
|
|
|
|
|
|
|
|
|
| |
Add vadc clock enable function.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 721c7a1448c5b7265b597b83d18f8338a27ea213)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 903a59ef941f39b6d7f693dd7c60528e166de079)
(cherry picked from commit dc767fb7d5c155f2a6ef01c4dee808b9c1944fc2)
|
|
|
|
|
|
|
|
| |
Support two display panels, one for LVDS, another for parallel LCD. Align the
feature to the v2015.04 uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit d7f54f22607ffcace6cda97984649a5ae4f65996)
|
|
|
|
|
|
|
| |
Update the board_video_skip to use CONFIG_VIDEO_MXS for LCD display support.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit d6d0265b09e66c576ab4c01841166415f834a1ff)
|
|
|
|
|
|
|
|
| |
The i.MX6SX uses a LVDS bridge to mux to the LCDIF interface. Implmement a
function for this muxing. So that on 6SX we can use a LVDS display.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 763658d9b497e44b7411581da592ef5b522e9cc9)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a new interface "mxs_lcd_panel_setup" to setup fb parameters and
specifies the LCDIF controller for multiple controllers of iMX6SX.
Pass fb parameters via "videomode" env remains work if the new interface
is not called before video initialization.
Modify LCDIF clock interface "mxs_set_lcdclk" to support multiple
LCDIF controllers on iMX6SX.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit d7f49b9378547c3a57b96bcdb907fc44616beb3d)
(cherry picked from commit e1343191b9de227c582847e7eeb5ce9238be0754)
|
|
|
|
|
|
|
|
| |
Define CONFIG_BOARD_LATE_INIT for mx6qarm2/mx6slevk/mx6sxsabresd
to let mmcdev/mmcroot work as expected.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 86135fb7e55c3046ead899b83f58dd6048eda9e8)
|
|
|
|
|
|
|
|
| |
Align to imx_v2015.04, dynamic setting mmcdev and mmcroot.
Then when boot linux, we can have correct "root=/dev/mmcblk[x]p2"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit b46b99a901eb194e81fc4836ee2259ad8857f4d3)
|
|
|
|
|
|
|
| |
Introuduce more pinmux macros definitions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 06893558f2cc042b683247989be5127a8027ebf2)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is a porting of
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_4.1.15_1.0.0_ga&id=e4dacc44d22e9474ec456cb330df525cd805ea38
"
i.MX6QP and i.MX7D BCH module integrated a new feature to detect the
bitflip number for erased NAND page. So for these two platform, set the
erase threshold to gf/2 and if bitflip detected, GPMI driver will
correct the data to all 0xFF.
Also updated the imx6qp dts file to ditinguish the GPMI module for i.MX6Q
with the one for i.MX6QP.
"
In this patch, i.MX6UL is added and threshold changed to use ecc_strength.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 489929be0221bb7d4c46bb5bc6083650b78f73e0)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Need to check fuse bit 25 of bank 0 word 4 before initialize bee.
The bit: 0 means bee enabled, 1 means bee disabled.
If disabled, continuing initialize bee will cause system hang, so
need to check this bit before initialize bee.
Add macro to enable BEE in header file, default disabled.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit ef4cb7c53418e4e1dd7cfcb7c6974cfea77ef3c0)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is to support Bus Encryption Engine(BEE) for i.MX 6UL.
Supported feature:
1. SNVS key and soft key
2. CTR and ECB mode
3. Specify address region to bee.
Two commands are included:
bee init [key] [mode] [start] [end] - BEE block initial
"Example: bee init 1 1 0x80000000 0x80010000\n"
bee test [region]
"Example: bee test 1\n"
Mapping:
[0x10000000 - (0x10000000 + size - 1)] : [start - (start + size - 1)]
[0x30000000 - (0x30000000 + IRAM_SIZE - 1)] : [IRAM_BASE_ADDR -
(IRAM_BASE_ADDR + IRAM_SIZE - 1)]
Whatever start is, start - (start + size -1) will be fixed mapping to
0x10000000 - (0x10000000 + size - 1)
Since default AES region's protected size is SZ_512M, so
on mx6ul evk board, you can not simply run 'bee init', it will
overlap with uboot execution environment, you can use
'bee init 0 0 0x80000000 0x81000000'.
If want to use bee, Need to define CONFIG_CMD_BEE in board configuration
header file, since CONFIG_CMD_BEE default is not enabled.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 29b9bdbbdac9678dba9b7bc2d3662598e9c548a5)
(cherry picked from commit 6d45292ff7e7020a48842f033f8a337daabe4476)
|
|
|
|
|
|
|
| |
Update imx-regs.h to align with 2016.03
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 9bbd54e44ae1f0868d3f0dd34975e76606b0a5e8)
|
|
|
|
|
|
|
|
| |
Set wdog WCR register SRS bit to turn off internal reset signal WDOG_RESET_B_DEB
for mx7d. So that the warm reset is disabled.
The WDA is cleared to output WDOG_B immediately to reset the board.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
| |
Copy the dts and dtsi files from kernel to support imx6q sabresd board.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
| |
Get the latest dtsi files and clock.h for imx6qdl from kernel
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Some initialization was unintentionally being skipped on omap5.
Fixes: f5af0827f276 ("arm: omap-common: Guard some parts of the code with CONFIG_OMAP44XX/OMAP54XX")
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
|
|
| |
Currently nandecc returns zero even if underlaying
omap_nand_switch_ecc function fails. Fix that by
propagating error returned to command return value.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
|
|
| |
This moves all of the current ARM errata from various header files and in to
Kconfig. This allows for a minor amount of cleanup as we had some instances
where both a general common header file was enabling errata as well as the
board config. We now just select these once at the higher level in Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
| |
Move the default y options under arch/arm/mach-omap2/omap4/Kconfig to be
using imply instead in arch/arm/Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
| |
Move the default y options under arch/arm/mach-omap2/omap3/Kconfig to be
using imply instead in arch/arm/Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
| |
The option that we had set in board/ti/common/Kconfig as default y are
best done with imply under the appropriate main Kconfig option instead.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
|
| |
These particular SPL options are part of what the ROM provides, but for
compatibility with how we have previously used them, move them to being
implied by the board being selected.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
do_smhload was using a ulong to store the return value from
smh_load_file. That returns an int, where -1 indicates an error. As a
ulong will never be negative, smh_load_file errors were not detected and
so_smhload always returned zero.
Also, when errors were spotted, do_smhload was returning 1, rather than
the enumeration CMD_RET_FAILURE (which is also 1).
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In some cases this is absolutely required, so select this for some secure
features. This also requires migration of RSA_FREESCALE_EXP
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Cc: Naveen Burmi <NaveenBurmi@freescale.com>
Cc: Po Liu <po.liu@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Priyanka Jain <Priyanka.Jain@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Feng Li <feng.li_2@nxp.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Mingkai Hu <Mingkai.Hu@freescale.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Saksham Jain <saksham.jain@nxp.freescale.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
|
|
|
| |
As part of the startup process for boards using the SPL, we need to
call spl_relocate_stack_gd. This is needed to set up malloc with its
DRAM buffer.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Current ARM assembler helper for the 'return to caller' pseudo-instruction
turns 'ret lr' into 'mov pc, lr' for ARMv5TE. This causes the core to remain
in its current ARM state even when the routine doing the 'ret' was called
from Thumb-1 state, triggering an undefined instruction exception.
This causes early run-time failures in all boards compiled using the Thumb-1
instruction set (for instance the Open-RD family).
ARMv5TE supports 'bx lr' which properly implements interworking and thus
correctly returns to Thumb-1 state from ARM state.
This change makes 'ret lr' turn into 'bx lr' for ARMv5TE.
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
|
|
|
|
|
|
|
|
|
|
| |
After we authenticate/decrypt an image we need to flush the caches
as they may still contain bits of the encrypted image. This will
cause failures if we attempt to jump to this image.
Reported-by: Yogesh Siraswar<yogeshs@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
|
|
| |
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Re-use of routines embedded in the Boot ROM requires a function
pointer table for each SoC. This is not nice in terms of the
maintainability in a long run.
Implement simple eMMC load APIs that are commonly used for LD11,
LD20, and hopefully future SoCs.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For LD11 and LD20 SoCs, the RST_n pin is asserted by default. If
the EXT_CSD[162], bit[1:0] (RST_n_ENABLE) is fused, the eMMC device
would stay in the reset state until its RST_n pin is deasserted by
software.
Currently, this is cared by an ad-hoc way because the eMMC hardware
reset provider is not supported in U-Boot for now. This code should
be re-written once the "mmc-pwrseq-emmc" binding is supported.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
|
|
| |
If the DRAM clock duty does not meet the allowable tolerance,
it is marked in an efuse register. If the register is fused,
the boot code should compensate for the DRAM clock duty error.
Signed-off-by: Kotaro Hayashi <hayashi.kotaro@socionext.com>
[masahiro: simplify code, add git-log]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
| |
This parameter is redundant because we can know the number of
channels by checking if dram_ch[2].size is zero.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
| |
The current implementation has ugly switch statements here and there,
and duplicates similar code. Rework it using table lookups for SoC
data and reduce code duplication.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
| |
The spl_boot_mode() is unrelated to the other code in this file.
Besides, this function is only called from common/spl/spl_mmc.c,
so it is reasonable to guard with CONFIG_SPL_MMC_SUPPORT.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
|
|
| |
Currently, arch/arm/mach-uniphier/boot-mode/boot-mode.c is messed up
with unrelated code; there is no reason why the "mmcsetn" command
must be placed in this file.
Split out the MMC code into arch/arm/mach-uniphier/mmc-first-dev.c.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
| |
Since commit 26b09c022ab6 ("ARM: uniphier: move SBC and Support Card
init code to U-Boot proper"), SPL does not need pin-mux settings for
the System Bus.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
|
| |
The base address of each DRAM channel can be calculated from other
parameters, so does not need hard-coding. What we need is the size
of each DRAM channel and DRAM_SPARSE flag to decide the start address
of DRAM channel 1.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Since commit 26b09c022ab6 ("ARM: uniphier: move SBC and Support Card
init code to U-Boot proper"), the System Bus is initialized by
board_init(). The show_board_info() is called from board_init_f()
by default, so the revision register of the Micro Support Card may
not be accessed at this point. Show its revision after the System
Bus is initialized.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
| |
Now the "for" loop here iterates on the detected memory banks.
It must skip unused DRAM banks.
Fixes: c995f3a3c526 ("ARM: uniphier: use gd->bd->bi_dram for memory reserve on LD20 SoC")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
| |
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
| |
If SG_MEMCONF_CH2_DISABLE bit is set, the DRAM channel 2 is unused.
The register settings for the ch2 should be ignored.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
|
| |
Commit a8e6300d483d ("ARM: uniphier: refactor spl_init_board()")
accidentally dropped dcache_disable() call. Since then, the SPL of
LD11 and LD20 failed to load U-Boot proper.
Fixes: a8e6300d483d ("ARM: uniphier: refactor spl_init_board()")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
|
|
|
|
|
|
| |
When using early malloc the allocated memory can overflow into the SRAM
scratch space, move NON_SECURE_SRAM_IMG_END down a bit to allow more
dynamic allocation at the expense of a slightly smaller maximum image
size.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and
SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig.
Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to
Kconfig the board defconfigs for db-88f6820-gp_defconfig
kc1_defconfig and sniper_defconfig need to be updated.
Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the socfpga bootrom supports mmc booting from either a raw image
starting at 0x0, or from a partition of type 0xa2. This patch
adds support for locating the boot image in the first type 0xa2
partition found.
Assigned a partition number of -1 will cause a search for a
partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
and use it to find the u-boot image
Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
|