summaryrefslogtreecommitdiff
path: root/arch/arm
Commit message (Collapse)AuthorAgeLines
* sunxi: Fix H3 DRAM DQ read delay configurationJens Kuske2015-12-10-6/+6
| | | | | | | | | | | The read delays were set incorrectly, leading to reliability issues at higher DRAM clock speeds. This commit adjusts this to match the vendor boot0 behaviour. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun4i: clock: Cleanup some whitespace errorsOlliver Schinagl2015-12-10-3/+3
| | | | | | | | Add some spaces around operators. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: twi: Enable clocks on sun7iOlliver Schinagl2015-12-10-6/+0
| | | | | | | | | | | | | | | | | Commit 6c739c5d added code to enable i2c bus 4 and 5 on the sun7i SoC but forgot to extend the range check in clock_twi_onoff, resulting in the clock not getting enabled. The range-check is not needed at all, since clock_twi_onoff only gets called with such high indexes when CONFIG_I2C3_ENABLE / CONFIG_I2C4_ENABLE is set and Kconfig already only allows these on sun6i / sun7i. This commit removes the range-check all together fixing i2c bus 4 and 5 not working on sun7i. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> [hdegoede@redhat.com] Remove range check instead of extending it Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: select SYS_NS16550 from KconfigHans de Goede2015-12-10-0/+1
| | | | | | | Select SYS_NS16550 from Kconfig instead of setting it in all our defconfig files. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add suport for A83T HomletV2 Board by Allwinnervishnupatekar2015-12-10-0/+66
| | | | | | | | | | | | Add dts and defconfig for h8homletv2 board. H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner. It has UART, ethernet, USB, HDMI, etc ports on it. A83T patches are tested on this board. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: dts: sun8i: Add Allwinner A83T dtsivishnupatekar2015-12-10-0/+247
| | | | | | | | | | | | Allwinner A83T is new octa-core cortex-a7 SOC. This adds the basic dtsi, the clocks differs from earlier sun8i SOCs. This is not yet included in kernel. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add support for Allwinner A83T DRAMvishnupatekar2015-12-10-0/+628
| | | | | | | | | | | Add support for A83T dram. Register are different from sun8i A33. init code is similar to A33 dram init. hope we'll shift duplicate code in dram_sun8i_* to dram helper in future. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: clk: add basic clocks for A83Tvishnupatekar2015-12-10-1/+447
| | | | | | | | | | | Add basic clocks pll1, pll5, and some default values from allwinner u-boot. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> [hdegoede@redhat.com] Fix PLL6 init to run at 600 MHz instead of 288 MHz, fixing the mmc support not working [hdegoede@redhat.com] Fix PLL init code to properly wait for the PLL-s to stabilize, fixing cold-booting directly from sdcard not working Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: power: enabled support for axp818vishnupatekar2015-12-10-3/+5
| | | | | | | | | Enabled support for AXP818 in SPL and u-boot. DCDC1, DCDC2, DCDC3 and DCSC5 are enabled. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add support for UART0 in PB pin group on A83Tvishnupatekar2015-12-10-0/+5
| | | | | | | | | | On A83T, PB9,PB10 are UART0 pins. On allwinner A83T Dev board(h8homlet), this uart0 serial connector is exposed. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add Machine Support for A83T SOCvishnupatekar2015-12-10-0/+2
| | | | | | | | | | | Allwinner A83T is octa-core cortex-a7 SOC. This enables support for A83T. SMP is not yet supported. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Set AHB1 clock to PLL6/3 on all clock_sun6i.h using SoCsHans de Goede2015-12-10-4/+0
| | | | | | | | | | | According to the datasheets the max speed of AHB1 is 276 MHz, so setting it to PLL6 / 3 which gives us 200MHz everywhere is fine, and gives us a nice speed-up in certain workloads. Suggested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Tested-by: Chen-Yu Tsai <wens@csie.org>
* Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-12-07-14/+7
|\
| * zynq: sdhci: Move driver to DMMichal Simek2015-12-07-8/+5
| | | | | | | | | | | | | | Move driver to DM Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * zynq: sdhci: Remove zynq_sdhci_of_init()Michal Simek2015-12-07-1/+0
| | | | | | | | | | | | Prepare for using DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM: zynq: Remove unused SERIAL macros for serial_zynqMichal Simek2015-12-07-5/+0
| | | | | | | | | | | | Remove unused macros when driver was moved to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * net: gem: Move driver to DMMichal Simek2015-12-07-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | - Enable DM_ETH by default for Zynq and ZynqMP - Remove board_eth_init code - Change miiphy_read function to return value instead of error code based on DM requirement - Do not enable EMIO DT support by default Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | arm: socfpga: Remove cpu_mmc_init()Marek Vasut2015-12-07-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | This function triggers the registration of the dwmmc driver on SoCFPGA, but this is not needed in case the driver is correctly probed from DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
* | arm: socfpga: Add SoCFPGA SR1500 boardStefan Roese2015-12-07-1/+110
|/ | | | | | | | | | | | | | | The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
* am33xx: Update serial pdataTom Rini2015-12-06-11/+7
| | | | | | | | We now want to make sure that we have the platform data for NS16550 when we do not have OF_CONTROL set. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* dm: tegra: Provide serial platform data for SPLSimon Glass2015-12-05-1/+1
| | | | | | | | | | At present an incorrect #if term is preventing this data from being compiled in. All tegra boards use driver model for serial, so we can just drop this. Fixes: fde7e18938d8 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig") Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thomas Chou <thomas@wytron.com.tw>
* rpi: get rid of BCM2835_BOARD_REV_* macrosStephen Warren2015-12-05-28/+0
| | | | | | | | | | | | | | There are two numbering schemes for the RPi revision values; old and new scheme. The values within each scheme overlap. Hence, it doesn't make sense to have absolute/global names for the revision IDs. Get rid of the names and just use the raw revision/type values to set up the array of per-revision data. This change makes most sense when coupled with the next change. However, it's split out so that the mechanical cut/paste is separate from the logic changes for easier review and problem bisection. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* Change e-mail address of Kamil LulkoKamil Lulko2015-12-05-20/+20
| | | | Signed-off-by: Kamil Lulko <kamil.lulko@gmail.com>
* arch/arm/cpu/arm920t/ep93xx/led.c: Mark inline functions as static inlineTom Rini2015-12-05-2/+2
| | | | | | | | With gcc-5.x we get warning about inline non-static functions referring to static elements. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* arm: dts: dra7-evm: add chosen node to specify serial console deviceMugunthan V N2015-12-05-0/+4
| | | | | | | Introduce chosen node and specify uart0 to be used as serial console. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: dts: omap: add reg-shift to serial device tree nodeMugunthan V N2015-12-05-0/+22
| | | | | | | | | | | | | | With the commit 'c7b9686d5d48 ("ns16550: unify serial_omap")' all TI platforms are broken with DM/DT boot as ns16550 driver expects reg-shift from DT which is not populated for TI platforms. Earlier it worked as it was hard coded to 2 in serial-omap driver. So adding the reg-shift to serial nodes for dra7, am4372 and am33xx dtsi files. Tested this patch on am437x-sk-evm, am437x-gp-evm, am335x-boneblack, dra74x-evm and dra72x-evm. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Thomas Chou <thomas@wytron.com.tw>
* common: bootm: check return value of strict_strtoulPeng Fan2015-12-05-1/+4
| | | | | | | | | | | | | | Before continue, check return value of strict_strtoul. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Simon Glass <sjg@chromium.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: York Sun <yorksun@freescale.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-12-04-3/+18
|\
| * ARM: mxs: fix VDDD brownout settingMichael Heimpold2015-12-01-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the moment, the desired brownout is at 1.0V. However, this setting cannot be realized by hardware since we have only 3 bits to represent the voltage difference from the target value. Target value is 1500 mV, brownout target is 1000 mV, voltage steps are 25 mV. Register content calculation: (1500 [mV] - 1000 [mV]) / 25 [mV] = 20 (decimal) = 0x14 Register takes only 3 bits, that is 0x4. But 0x4 * 25 [mV] = 100 [mV], that means that actual brownout level is 1500 [mV] - 100 [mV] = 1.4 V. Minimum possible BO level is 1500 [mV] - 0x7 * 25 [mV] = 1315 [mV]. So lets use this value as desired BO value (which is also the same as FSL bootlets use). Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| * mx6: clock: Modify GPMI clock to support mx6sxYe.Li2015-11-25-0/+12
| | | | | | | | | | | | | | On mx6sx, the CCM register bits for GPMI are different as other mx6 platforms. Modify the GPMI clock function to support mx6sx. Signed-off-by: Ye.Li <B37916@freescale.com>
| * iomux-v3: Take MX6D in consideration for imx_iomux_v3_setup_pad()Otavio Salvador2015-11-25-1/+1
| | | | | | | | | | | | | | | | We should also take MX6D option in consideration when defining imx_iomux_v3_setup_pad(). Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
| * cgtqmx6eval: Add SPL supportOtavio Salvador2015-11-25-0/+3
| | | | | | | | | | | | | | | | | | Congatec has several MX6 boards based on quad, dual, dual-lite and solo. Add SPL support so that all the variants can be supported Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
* | Revert "rockchip: Reconfigure the malloc based to point to system memory"Sjoerd Simons2015-12-01-7/+0
| | | | | | | | | | | | | | | | | | | | | | This patch was merged shortly before the v2015.10 as a minimal fix for booting on rockchip. Now that the patch series from Hans to do the relocation in generic code has been merged it can be dropped. This reverts commit b1f492ca9e0c090209824ff36456d4f131843190. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: move SYS_MALLOC_SIMPLE to mach-rockchip KconfigAriel D'Alessandro2015-12-01-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1eb0c03c2198a7ec9de456b83dacdc4831b96cbf added SPL_SYS_MALLOC_SIMPLE Kconfig option and changed the way it is evaluated. Thus, the definitions of CONFIG_SYS_MALLOC_SIMPLE in rk3***_common.h board configs are now incorrect because CONFIG_SPL_BUILD is enabled so CONFIG_IS_ENABLED(SYS_MALLOC_SIMPLE) will look for SPL_SYS_MALLOC_SIMPLE instead of SYS_MALLOC_SIMPLE. This commit fix this enabling SPL_SYS_MALLOC_SIMPLE with the new Kconfig option by default in rockchip-mach. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: Add max spl size & spl header configsJeffy Chen2015-12-01-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our chips may have different max spl size and spl header, so we need to add configs for that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Dropped CONFIG_ROCKCHIP_MAX_SPL_SIZE from rk3288_common.h, Added $(if...) to tools/Makefile to fix widespread build breakage Signed-off-by: Simon Glass <sjg@chromium.org> Series-changes: 8 - Drop CONFIG_ROCKCHIP_MAX_SPL_SIZE from rk3288_common.h, - Add $(if...) to tools/Makefile to fix widespread build breakage
* | rockchip: Add basic support for evb-rk3036 boardhuang lin2015-12-01-1/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This add some basic files required to allow the board to dispaly serial message and can run command(mmc info etc) Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Moved board Kconfig fragment from previous patch into this one to fix build error: Signed-off-by: Simon Glass <sjg@chromium.org> Series-changes: 8 - moved board Kconfig fragment from previous patch into this one
* | rockchip: rk3036: Add core Soc start-up codehuang lin2015-12-01-2/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rk3036 only 4K size SRAM for SPL, so only support timer, uart, sdram driver in SPL stage, when finish initial sdram, back to bootrom.And in rk3036 sdmmc and debug uart use same iomux, so if you want to boot from sdmmc, you must disable debug uart. Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Fixed build error for chromebook_jerry, firefly-rk3288: Signed-off-by: Simon Glass <sjg@chromium.org> Series-changes: 8 - Fix build error for chromebook_jerry, firefly-rk3288
* | rockchip: add rk3036 sdram driverhuang lin2015-12-01-0/+1107
| | | | | | | | | | | | | | add rk3036 sdram driver so we can set up sdram in SPL Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: add early uart driverhuang lin2015-12-01-0/+108
| | | | | | | | | | | | | | | | add early uart driver so we can print debug message in SPL stage Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: mmc: get the fifo mode and fifo depth property from dtshuang lin2015-12-01-0/+1
| | | | | | | | | | | | | | | | rk3036 mmc do not have internal dma, so we use fifo mode when read and write data, we get the fifo mode and fifo depth property from dts, pass to dw_mmc driver. Signed-off-by: Lin Huang <hl@rock-chips.com>
* | rockchip: rk3036: Add a simple syscon driverhuang lin2015-12-01-1/+22
| | | | | | | | | | | | | | Add a driver that provides access to system controllers Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: rk3036: Add Soc reset driverhuang lin2015-12-01-0/+55
| | | | | | | | | | | | | | | | We can reset the Soc using some CRU (clock/reset unit) register. Add support for this. Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: rk3036: Add header files for GRFhuang lin2015-12-01-0/+493
| | | | | | | | | | | | | | GRF is the gereral register file. Add header files with register definitions. Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: rk3036: Add clock driverhuang lin2015-12-01-0/+168
| | | | | | | | | | | | | | | | Add a driver for setting up and modifying the various PLLs, peripheral clocks and mmc clocks on RK3036 Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: Bring in RK3036 device tree file includes and bindingshuang lin2015-12-01-0/+427
| | | | | | | | | | | | | | | | | | Since rk3036 device tree file still in reviewing, bring it from https://patchwork.kernel.org/patch/7203371/ and add some aliases we need in uboot Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: add config decide whether to build common.chuang lin2015-12-01-1/+1
| | | | | | | | | | | | | | | | some rockchips soc will not use uclass in SPL stage, so define config to decide whether to build common.c Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: rename board-spl.c to rk3288-board-spl.chuang lin2015-12-01-1/+1
| | | | | | | | | | | | | | | | since different rockchip soc need different spl file, so rename board-spl.c. Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: move SYS_MALLOC_F_LEN to rk3288 own Kconfighuang lin2015-12-01-3/+3
| | | | | | | | | | | | | | | | | | since different rockchip SOC have different size of SRAM, So the size SYS_MALLOC_F_LEN may different, so move this config to rk3288 own Kconfig Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: add timer driverhuang lin2015-12-01-19/+73
| | | | | | | | | | | | | | | | some rockchip soc will not include lib/timer.c in SPL stage, so implement timer driver for some soc can use us delay function in SPL. Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | dm: pci: Disable PCI compatibility functions by defaultSimon Glass2015-12-01-0/+1
| | | | | | | | | | | | | | | | | | We eventually need to drop the compatibility functions for driver model. As a first step, create a configuration option to enable them and hide them when the option is disabled. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.1 at 2024-10-07 18:21:36 +0000