summaryrefslogtreecommitdiff
path: root/arch/arm
Commit message (Collapse)AuthorAgeLines
* omap3: Display MHz instead of mHz on the consoleman.huber@arcor.de2013-04-12-2/+2
| | | | | | The processor is hopefully running with M(ega)Hz and not with m(illi)Hz. Signed-off-by: Manfred Huber <man.huber@arcor.de>
* am335x: Really correct DDR timings on new BeagleBone partTom Rini2013-04-12-7/+7
| | | | | | | | The previous timings were done on the internal-only A1 board which has different DDR part than all later revs. The timings need a slight adjustment to be correct in all cases with later revs. Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-12-21/+27
|\
| * omap5912-osk: Fix get_timer() and CONFIG_SYS_HZJon Hunter2013-04-10-7/+8
| | | | | | | | | | | | | | The function get_timer() should return time in ms and CONFIG_SYS_HZ should be set to 1000 by default. Fix both of these items. Signed-off-by: Jon Hunter <jon-hunter@ti.com>
| * OMAP4: Fix bug in omap4460_volts structLubomir Popov2013-04-10-4/+4
| | | | | | | | | | | | | | | | | | | | | | The omap4460_volts struct was incorrectly referencing tps62361 instead of twl6030 as PMIC for the core and mm voltages (the tps is used for mpu supply only). This shall lead to bad OPP settings while booting kernel. Fixing it. Fix some comments as well. Signed-off-by: Lubomir Popov <lpopov@mm-sol.com>
| * am335x: Update timings for the beaglebone againTom Rini2013-04-10-10/+10
| | | | | | | | | | | | | | | | After further testing we can run DDR at 400MHz so update the timings again. Tested-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Tom Rini <trini@ti.com>
| * am335x/ti814x: Correct MMC_BOOT_DEVICES_START/ENDTom Rini2013-04-09-0/+5
| | | | | | | | | | | | | | | | Given that on TI814x we have MMC1/2 swapped, we also need to swap them in MMC_BOOT_DEVICES_START/END Reported-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Tom Rini <trini@ti.com>
* | arm: Make all linker scripts compatible with per-symbol sectionsBenoît Thébaudeau2013-04-12-14/+14
| | | | | | | | | | | | | | | | Let all ARM linker scripts handle properly -ffunction-sections and -fdata-sections. This will be useful for future changes in order to create symbol-specific sections in common .S files. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm1176: Remove unused MMU setup from start.SBenoît Thébaudeau2013-04-12-90/+1
| | | | | | | | | | | | | | | | | | Following the removal of the smdk6400 board, the MMU setup code in arm1176/start.S becomes unused, so remove it. It will still be possible to restore it later from the Git history if necessary, in which case it should be moved out of the relocate_code() function. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm: Remove deprecated and now unused NAND SPLBenoît Thébaudeau2013-04-12-24/+6
| | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm: Remove support for unused s3c64xxBenoît Thébaudeau2013-04-12-1632/+0
| | | | | | | | | | | | | | | | Following the removal of the smdk6400 board, the s3c64xx SoC becomes unused, so remove associated code. It will still be possible to restore it later from the Git history if necessary. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm: Remove support for smdk6400Benoît Thébaudeau2013-04-12-13/+0
| | | | | | | | | | | | | | | | The migration of boards from Makefile to boards.cfg was due for v2012.03, but smdk6400 did not follow, and it does not build, so move it to scrapyard. It will still be possible to restore it from the Git history before fixing it. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | imx: Add u-boot-with-nand-spl.imx make targetBenoît Thébaudeau2013-04-12-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | This image combines the SPL with the i.MX header, the FCB and U-Boot. For i.MX25/35/51, the FCB is ignored by the boot ROM, so this image is just useful because it can be programmed on a NAND Flash page boundary. For i.MX53, the FCB is required by the boot ROM. This does not support i.MX6 so far because its FCB is more complicated. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | imx: Add u-boot-with-spl.imx make targetBenoît Thébaudeau2013-04-12-0/+6
| | | | | | | | | | | | | | | | | | | | This image combines the SPL with the i.MX header and U-Boot. This is a convenient way of having a single image to program on some boot devices. The i.MX header has to be added to the SPL before appending U-Boot, so that the boot ROM loads only the SPL. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm: Remove unused relocate_code() parametersBenoît Thébaudeau2013-04-12-57/+29
| | | | | | | | | | | | | | | | Commit e05e5de7fae5bec79617e113916dac6631251156 made the 2 1st parameters of ARM's relocate_code() useless since it moved the code handling them to crt0.S. So, drop these parameters. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm926ejs: Remove deprecated and now unused NAND SPLBenoît Thébaudeau2013-04-12-10/+0
| | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | nand: mxc: Switch NAND SPL to generic SPLBenoît Thébaudeau2013-04-12-1/+2
| | | | | | | | | | | | | | | | | | This also fixes support for mx31pdk and tx25, which had been broken by commit e05e5de7fae5bec79617e113916dac6631251156. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Acked-by: Scott Wood <scottwood@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
* | imx: Fix automatic make targets for imx imagesBenoît Thébaudeau2013-04-12-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Automatically build the 'u-boot.imx' (i.e. imx header + u-boot.bin) and 'SPL' (i.e. imx header + u-boot-spl.bin) make targets for all imx processors supporting this header, so for arm926ejs, arm1136 and armv7. Some combinations were missing. At the same time, fix the build of SPL targets not supporting the imx header on arm1136. For arm1136, the 'SPL' make target was forced to build in all cases if CONFIG_SPL_BUILD was defined, even for non-imx platforms or imx setups without an imx header. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm: crt0.S: Remove bogus .globlBenoît Thébaudeau2013-04-12-24/+4
| | | | | | | | | | | | | | | | | | | | The purpose of .globl is to export symbols for ld, not to declare external symbols. By the way, use the ENTRY() and ENDPROC() macros to define functions rather than using .global directly. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm: relocate_code(): Use __image_copy_end for end of relocationBenoît Thébaudeau2013-04-12-15/+64
| | | | | | | | | | | | | | | | | | | | | | | | Use __image_copy_end instead of __bss_start for the end of the image to relocate. This is the same as commit 033ca72, but applied to all ARM start.S. This is a more appropriate symbol naming for an image copy & relocate feature, and this also saves a useless copy of data put between __image_copy_end and __bss_start in linker scripts (e.g. relocation information, or MMU initialization tables used only before jumping to the relocated image). Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm: relocate_code(): Remove useless relocation offset computationBenoît Thébaudeau2013-04-12-66/+39
| | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm1136: Remove redundant relocate_code() returnBenoît Thébaudeau2013-04-12-2/+0
| | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm: relocate_code() is no longer noreturnBenoît Thébaudeau2013-04-12-39/+13
| | | | | | | | | | | | | | | | | | | | Commit e05e5de7fae5bec79617e113916dac6631251156 made ARM's relocate_code() return to its caller, but it did not update its declaration accordingly. Fixing this function declaration fixes dropped C code following calls to relocate_code(). Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | arm: start.S: Fix _TEXT_BASE for SPLBenoît Thébaudeau2013-04-12-4/+52
| | | | | | | | | | | | | | | | _TEXT_BASE must be set to CONFIG_SPL_TEXT_BASE for generic SPL, and to CONFIG_SYS_TEXT_BASE for non-SPL builds. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Reviewed-by: Tom Rini <trini@ti.com>
* | imx: mx5: lowlevel_init: Simplify codeBenoît Thébaudeau2013-04-12-6/+2
|/ | | | | | | Don't use several instructions to build constant values. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Acked-by: Stefano Babic <sbabic@denx.de>
* OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMCTom Rini2013-04-08-3/+17
| | | | | | | | | | | | | | | In the case of booting from certain peripherals, such as UART, we must not see what the device descriptor says for RAW or FAT mode because in addition to being nonsensical, it leads to a hang. This is why we have a test currently for the boot mode being within range. The problem however is that on some platforms we get MMC2_2 as the boot mode and not the defined value for MMC2, and in others we get the value for MMC2_2. This is required to fix eMMC booting on omap5_uevm. Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC). Signed-off-by: Tom Rini <trini@ti.com>
* arm: omap4: Fix SDRAM AUTO DETECTIONLokesh Vutla2013-04-08-18/+16
| | | | | | | | | | | | | | Commit "8602114 omap: emif: configure emif only when required" breaks SDRAM_AUTO_DETECTION. The issue is dmm_init() depends on emif_sizes[](SDRAM Auto detection) done in do_sdram_init(). The above commit moves dmm_init() above do_sdram_init() because of which dmm_init() uses uninitialized emif_sizes[]. So instead of using global emif_sizes[], get sdram details locally and calculate emif sizes. Reported-by: Michael Cashwell <mboards@prograde.net> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* OMAP: Fix copy-paste bug that did not enable UART4 clockLubomir Popov2013-04-08-2/+2
| | | | | | | | | | | V2 fixes line wrap issue of the patch itself. UART3 was enabled twice instead of UART4. One more cosmetic change in a comment on EMIF clock. Signed-off-by: Lubomir Popov <lpopov@mm-sol.com> Reviewed-by: R Sricharan <r.sricharan@ti.com>
* omap2420-h4: Fix get_timer() and CONFIG_SYS_HZHunter, Jon2013-04-08-2/+6
| | | | | | | The function get_timer() should return time in ms and CONFIG_SYS_HZ should be set to 1000 by default. Fix both of these items. Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* omap2420-h4: Fix booting from NOR flashHunter, Jon2013-04-08-3/+3
| | | | | | | | | | | | | | | | The omap2420-h4 board is using a RAM based address as the linker location for code. This is causing several problems when attempting to run the latest u-boot code base on this board from flash. Update the default linker location for code to be in NOR flash. Please note that OMAP maps the NOR flash to address 0x08000000 by default and so use this as the default address for the NOR flash. Also remove legacy code that attempts to calculate where in flash the sdata structure, that holds the memory interface configuration data, is located. By changing the default linker location for code to flash this is no longer necessary. Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* omap_gpmc: change nandecc commandAndreas Bießmann2013-04-08-10/+25
| | | | | | | | | | | | | With uppcoming BCH support on OMAP devices we need to decide between differnt algorithms when switching the ECC engine. Currently we support 1-bit hammign and 8-bit BCH on HW backend. In order to switch between differnet ECC algorithms we need to change the interface of omap_nand_switch_ecc() also. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Tom Rini <trini@ti.com> Cc: Thomas Weber <thomas.weber.linux@googlemail.com>
* omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernelAndreas Bießmann2013-04-08-0/+17
| | | | | | | | | | | | This patch adds BCH8 ooblayout for NAND as provided by 0e618ef0a6a33cf7ef96c2c824402088dd8ef48c in linux kernel. This Layout is currently only provided for 64 byte OOB. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Tom Rini <trini@ti.com> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Scott Wood <scottwood@freescale.com> Reviewed-by: Tom Rini <trini@ti.com>
* asm/omap_gpmc.h: consolidate common definesAndreas Bießmann2013-04-08-115/+89
| | | | | | | | | | | | | arch/arm/include/asm/arch-am33xx/omap_gpmc.h and arch/arm/include/asm/arch-omap3/omap_gpmc.h are almost the same, consolidate the common parts into a new header. Introduce a new asm/omap_gpmc.h which defines the command part and pulls in the architecture specific one. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Tom Rini <trini@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* omap3/cpu.h: add BCH supportAndreas Bießmann2013-04-08-0/+6
| | | | | | | | | | This patch adds the BCH result registers to register mapping for OMAP3 gpmc. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Tom Rini <trini@ti.com> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Scott Wood <scottwood@freescale.com> Reviewed-by: Tom Rini <trini@ti.com>
* am335x: Enable MMC1 clockTom Rini2013-04-08-0/+5
| | | | | | | | We must not assume ROM has enabled the clock for MMC1. Reported-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
* Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-04-110/+296
|\
| * exynos: change indentation of defines in cpu.hMinkyu Kang2013-04-04-3/+3
| | | | | | | | | | | | Fix the indentation of some defines by tab. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: pwm: Remove dead code of function exynos5_get_pwm_clkAkshay Saraswat2013-04-01-21/+0
| | | | | | | | | | | | | | | | | | As we shall now be using clock_get_periph_rate function. We find no reason for keeping code in function exynos5_get_pwm_clk. Hence, removing it. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: pwm: Use generic api to get pwm clk freqPadmavathi Venna2013-04-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Use generic api to get the pwm clock frequency Test with command "sf probe 1:0; time sf read 40008000 0 1000". Try with different numbers of bytes and see that sane values are obtained Build and boot U-boot with this patch, backlight works properly. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: clock: Add generic api to get the clk freqPadmavathi Venna2013-04-01-0/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add generic api to get the frequency of the required peripherial. This API gets the source clock frequency and returns the required frequency by dividing with first and second dividers based on the requirement. Test with command "sf probe 1:0; time sf read 40008000 0 1000". Try with different numbers of bytes and see that sane values are obtained Build and boot U-boot with this patch, backlight works properly. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: Add peripherial id for pwmPadmavathi Venna2013-04-01-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add peripherial id for pwm inorder to support generic api to get the clk frequency Test with command "sf probe 1:0; time sf read 40008000 0 1000". Try with different numbers of bytes and see that sane values are obtained Build and boot U-boot with this patch, backlight works properly. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: Tidy up the pwm_config function in the exynos pwm driverGabe Black2013-04-01-16/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some small fixes in the exynos pwm driver: 1. NS_IN_HZ is non-sensical since these are not compatible units. This constant actually describes the number of nanoseconds in a second. Renamed it to NS_IN_SEC. Also dropped the unnecessary parenthesis. 2. The variable "period" is not used to hold a period, it's used to hold a frequency. Renamed it to "frequency". 3. tcmp is an unsigned value, so (tcmp < 0) will never be true and the if which checks that condition will never execute. Also, there should be no problem if the pwm never switches, so there's no reason to subtract one from tcmp and therefore no reason to compare it against zero. Removed both ifs. If they weren't removed, tcmp should be a signed value. 4. Add a check for a 0 period. Test with command "sf probe 1:0; time sf read 40008000 0 1000". Try with different numbers of bytes and see that sane values are obtained Build and boot U-boot with this patch, backlight works properly. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: Avoid a divide by zero by specifying a non-zero period for pwm 4Gabe Black2013-04-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pwm_config function in the exynos pwm driver divides by its period period parameter. A function was calling pwm_config with a 0ns period and a 0ns duty cycle. That doesn't actually make any sense physically, and results in a divide by zero in the driver. This change changes the parameters to be a 100000ns period and duty cycle. Test with command "sf probe 1:0; time sf read 40008000 0 1000". Try with different numbers of bytes and see that sane values are obtained Build and boot U-boot with this patch, backlight works properly. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: pwm: Fix two bugs in the exynos pwm configuration codeGabe Black2013-04-01-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First, the "div" value was being used incorrectly to compute the frequency of the PWM timer. The value passed in is a constant which reflects the value that would be found in a configuration register, 0 to 4. That should correspond to a scaling factor of 1, 2, 4, 8, or 16, 1 << div, but div + 1 was being used instead. Second, the reset value of the timers were being calculated to give an overall frequency, thrown out, and set to a maximum value. This was done so that PWM 4 could be used as the system clock by counting down from a high value, but it was applied indiscriminantly. It should at most be applied only to PWM 4. This change also takes the opportunity to tidy up the pwm_init function. Test with command "sf probe 1:0; time sf read 40008000 0 1000". Try with different numbers of bytes and see that sane values are obtained Build and boot U-boot with this patch, backlight works properly. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: Add timer_get_us functionChe-Liang Chiou2013-04-01-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | timer_get_us returns the time in microseconds since a certain reference point of history. However, it does not guarantee to return an accurate time after a long period; instead, it wraps around (that is, the reference point is reset to some other point of history) after some periods. The frequency of wrapping around is about an hour (or 2^32 microseconds). Test with command "sf probe 1:0; time sf read 40008000 0 1000". Try with different numbers of bytes and see that sane values are obtained Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: Change get_timer() to work correctlySimon Glass2013-04-01-62/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present get_timer() does not return sane values. It should count up smoothly in milliscond intervals. We can change the PWM to count down at 1MHz, providing a resolution of 1us and a range of about an hour between required get_timer() calls. Test with command "sf probe 1:0; time sf read 40008000 0 1000". Try with different numbers of bytes and see that sane values are obtained Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: Add hardware accelerated SHA256 and SHA1Akshay Saraswat2013-03-29-0/+4
| | | | | | | | | | | | | | | | SHA-256 and SHA-1 accelerated using ACE hardware. Signed-off-by: ARUN MANKUZHI <arun.m@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * EXYNOS5: Add device node for DPAjay Kumar2013-03-27-0/+7
| | | | | | | | | | | | | | Add DT node and bindings documentaion for DP. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * EXYNOS5: Add device node for FIMDAjay Kumar2013-03-27-0/+6
| | | | | | | | | | | | | | Add DT node and bindings documentation for FIMD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * video: exynos_dp: Remove callbacks from the driverAjay Kumar2013-03-27-1/+0
| | | | | | | | | | | | | | | | | | Replaced the functionality of callbacks by using a standard set of functions. Instead of implementing and hooking up a callback, put the same code in one of the standard set of functions by overriding it. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.1 at 2024-12-23 20:19:28 +0000