| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When enabling "CONFIG_SECURE_BOOT", the build broken on iMX6SX platform
due to two problems.
1. The imximage tool in v2014 changes the command name of "SECURE_BOOT"
to "CSF". Must update it in imximage.cfg scripts.
2. The iMX6SX uses "CONFIG_ROM_UNIFIED_SECTIONS", but some HAB API
definitions are not defined and cause compile errors.
(HAB_RVT_REPORT_EVENT_NEW, HAB_RVT_REPORT_STATUS_NEW,
HAB_RVT_AUTHENTICATE_IMAGE_NEW, HAB_RVT_ENTRY_NEW, HAB_RVT_EXIT_NEW)
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
Add gis module, current gis is support vadc input.
Add power down function to lcdif driver.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
| |
Add vadc power up/down function.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
| |
Add vadc clock enable function.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
| |
Add registers and clock functions to enable/set LCDIF clock and LVDS.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a new interface "mxs_lcd_panel_setup" to setup fb parameters and
specifies the LCDIF controller for multiple controllers of iMX6SX.
Pass fb parameters via "videomode" env remains work if the new interface
is not called before video initialization.
Modify LCDIF clock interface "mxs_set_lcdclk" to support multiple
LCDIF controllers on iMX6SX.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
| |
Add the definitions for the RDC mappings on iMX6SX and include this
file to "imx-rdc.h"
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The RDC driver provides interfaces for setting peripherals and masters
at BSP initialization, before using the peripherals driver. Another
interfaces for lock/unlock RDC semaphore and permission check.
The driver assumes boot CPU which runs u-boot is in Domain 0
(default setting on boot). Users should not set it to other domains.
The peripherals ID and masters ID may change on different chip, each
should provide definitions of the IDs and be included in "imx-rdc.h".
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
| |
Implement the override function "arch_auxiliary_core_up" to boot
Cortex-M4 by executing command "bootaux".
The parameter "boot_private_data" points to fields where stores
the stack address and PC address for M4 to run.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Debug monitor will print out last failed AXI access info when
system reboot is caused by AXI access failure, only works when
debug monitor is enabled.
Enable this module on i.MX6SX.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
iMX6SX has different enet system clocks with iMX6SL, and has two ENET
controllers. So update clocks and soc APIs accordingly to support this
features.
1. Modify the clock API "enable_enet_clock" to enable enet system clock
for enet controllers.
2. Enet RGMII TX clock source may come from external or internal PLL.
By default, use the external phy CLK_25M output as TX clock source.
When using internal PLL as source, the function enable_fec_anatop_clock
must be called to enable clock for each enet controller.
3. Modify the MAC address function "imx_get_mac_from_fuse" to get either
ENET MAC address.
4. Add configuration "CONFIG_FEC_MXC_25M_REF_CLK" to enable ENET 25Mhz
reference clock.
5. Modify imx6slevk BSP to fit the new APIs.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
| |
Enable the clock for QuadSPI controllers. Must be called at
initialization.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Adding clks, pinmux, memory map, etc for iMX6SoloX.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
To be compatible with more USB otg lines which has micro port B to
connect imx6 OTG port when imx6 working at host mode, remove the
checking for the OTG ID with the init type. Only use the init type
for the power and controller initialization.
Use same EHCI register base address for various imx6 platform.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
| |
Should use the address of one register when calling "readl"/"writel".
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
The Latency parameters of PL310 Tag RAM latency control register and
Data RAM Latency control register are set in L2 cache enable.
Setting these registers must have PL310 not enabled. But when using
Plugin mode boot, the PL310 is enabled by bootrom. Thus, disable
the PL310 before this setting.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
shutdown vddpu and pcie phy to save power
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
-Change HDMI video mode to VGA.
-Add pixel clock fraction part setting in IPU driver,
fix video mode timing issue.
-Add overflow state clear workaround,
fix kernel hang in HDMI driver issue.
-Correct IPU clock to 264MHz.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes to support SPI NOR flash read, write and erase by using
"sf" command.
In addition, add a new configuration "mx6slevk_spinor" for building
the uboot that can be booted from SPI NOR flash and stored the
environments variables in it.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
Enable the USB EHCI for the imx6slevk board. Add VBUS control
pin settings and related BSP codes.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
- Add i2c0 support for imx6sl evk platform.
- Read pmic device ID and revsion ID.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
imx6 boards (sabresd, sabreauto, arm2 and slevk) have multiple SD/MMC ports to boot.
But current uboot hard code the SD/MMC port for environment variables storage. So
if customer changes a port without modifying the configuration "CONFIG_SYS_MMC_ENV_DEV",
error will issue at saving and loading environment.
Implement a mechanism to detect SD/MMC port from SRC SMBR register, and override the
default "mmc_get_env_devno". The "board_late_mmc_env_init" is used to set "mmcdev"
when booting from SD/MMC port. Finally after booting from SD/MMC, the environment storage
device and "mmcdev" are both set to current SD/MMC port. Customers don't need to re-build
the image if booting from different SD/MMC port.
This patch also adds SD1 and SD3 support to imx6slevk BSP, and adds support for sabreauto
SD1 slot on base board.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support android features:
fastboot, booti command and recovery for sabresd SD, sabresd eMMC,
sabreauto SD, sabreauto NAND.
For all booting media (SD, eMMC, NAND), inherits the partitions layout
from v2009.08. Fastboot will detect the booting media to replace
hardcoding fastboot device. SATA is not supported.
FDT is supported to use the "unused" fields in bootimg header which
requires the FDT to be combined into the boot.img.
For non-FDT boot.img, the "unused" fields should left to NULL and is
compatible to boot.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
| |
i.MX6sl evk has keyboards on the board, so add mxc_keyb driver to
support key press checking.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
If boot from usb, reset environment to default value.
Auto apply mfgtools setting and boot mfgtools kernel.
Signed-off-by: Frank Li <Frank.li@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add EPDC splash screen feature for MX6SL EVK, and MX6DL SABRESD board.
- Currently, splash screen consists of a simple black border
around a white screen. Done this way to save in memory footprint.
- EPDC splash screen is disabled by default in the config file for MX6DL_SABRESD
and MX6SL_EVK. If left enabled, the U-Boot image will not boot correctly
(hang), since some additional content on the boot device (waveform file) is
required for EPDC splash to work correctly.
Please refer to Linux Reference Manual for how to flash WAVEFORM file.
Signed-off-by: Robby Cai <R63905@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fastboot
Android fastboot leans on the USB gadget driver to communicate with host. Porting
the imx_udc driver from v2009.08 with two changes: adding resource/memory release
APIs and replacing the uncached memory with cache flush&invalidate operations.
Pins and Clocks initialization are added to support boards:
mx6qdlsabresd, mx6qdlsabreauto, mx6slevk
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz,
enable LDO bypass and setup PMIC voltages. LDO bypass is dependent
on the flatten device tree file.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
| |
Support generating plugin images. Make sure not to effect the size
of DCD images.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
| |
Support HAB authentication of kernel or secondary images via bootm
or hab_auth_img u-boot command.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
| |
Support CPU temperature sensors on i.MX6 SoC.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|\
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
arch/arm/cpu/arm926ejs/mxs/Makefile
include/configs/trats.h
include/configs/trats2.h
include/mmc.h
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Since Kbuild was introduced, warmboot_avp.o has been compiled
without -march=armv4t.
Makefile should be adjusted to pass a per-file option.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>
|
| |
| |
| |
| |
| | |
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Fix the macros guarding the spl.h header for various platforms. Due to
a typo and a propagation of it, the macros went out-of-sync with their
ifdef check, so fix this.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
U-Boot has supported two kinds of asm-offsets.h.
One is generic for all architectures and its source is located at
./lib/asm-offsets.c.
The other is SoC specific and its source is under SoC directory.
The problem here is that only boards with SoC directory can use
the asm-offsets infrastructure.
Putting asm-offsets.c right under CPU directory does not work.
Now a new demand is coming. PowerPC folks want to use asm-offsets.
But no PowerPC boards have SoC directory.
It seems inconsistent that some boards add asm-offsets.c to SoC
directoreis and some to CPU directories.
It looks more reasonable to put asm-offsets.c under arch/$(ARCH)/lib.
This commit merges asm-offsets.c under SoC directories into
arch/$(ARCH)/lib/asm-offsets.c.
By the way, I doubt the necessity of some entries in asm-offsets.c.
I am leaving refactoring to the board maintainers.
Please check "TODO" in the comment blocks in
arch/{arm,nds32}/lib/asm-offsets.c.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Yuantian Tang <Yuantian.Tang@freescale.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
U-Boot uses the 'mkimage' tool to produce various image types,
not only uImage image type. Rename the invocation name from
UIMAGE to MKIMAGE.
The following command was used to do the replacement:
git grep 'quiet_cmd_mkimage.* = UIMAGE' | cut -d : -f 1 | \
xargs -i sed -i "s@\(quiet_cmd_mkimage\)\(.*\) = UIMAGE @\1\2 = MKIMAGE@" {}
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The way that struct mmc was implemented was a bit of a mess;
configuration and internal state all jumbled up in a single structure.
On top of that the way initialization is done with mmc_register leads
to a lot of duplicated code in drivers.
Typically the initialization got something like this in every driver.
struct mmc *mmc = malloc(sizeof(struct mmc));
memset(mmc, 0, sizeof(struct mmc);
/* fill in fields of mmc struct */
/* store private data pointer */
mmc_register(mmc);
By using the new mmc_create call one just passes an mmc config struct
and an optional private data pointer like this:
struct mmc = mmc_create(&cfg, priv);
All in tree drivers have been updated to the new form, and expect
mmc_register to go away before long.
Changes since v1:
* Use calloc instead of manually calling memset.
* Mark mmc_register as deprecated.
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch add gicv3 support to uboot armv8 platform.
Changes for v2:
- rename arm/cpu/armv8/gic.S with arm/lib/gic_64.S
- move smp_kick_all_cpus() from gic.S to start.S, it would be
implementation dependent.
- Each core initialize it's own ReDistributor instead of master
initializeing all ReDistributors. This is advised by arnab.basu
<arnab.basu@freescale.com>.
Signed-off-by: David Feng <fenghua@phytium.com.cn>
|
| |
| |
| |
| |
| |
| | |
The conditional is using a variable that is not defined.
Signed-off-by: Rommel G Custodio <sessyargc+u-boot@gmail.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When flush the d$ with set/way instruction, it need calculate the way's
offset = log2(Associativity); but in current uboot's code, it use below
formula to calculate the offset: log2(Associativity * 2 - 1), so finally
it cannot flush data cache properly.
Signed-off-by: Leo Yan <leoy@marvell.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For ARMv8, U-boot has been running at EL3 with cache and MMU enabled.
Without proper setup for EL2, cache and MMU are both disabled (out of
reset). Before switching, we need to flush the dcache to make sure the
data is in the main memory.
Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: David.Feng <fenghua@phytium.com.cn>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch contains several changes required for second Ethernet
(enet1/RMII1) port on vf610
- ANADIG PLL5 control definitions required for Ethernet RMII1 clock
- Secondary Ethernet (enet1) MAC RMII1 base address definition
- RMII1 iomux definitions
- VF610_PAD_PTA6__RMII0_CLKOUT iomux definition required for
internal (e.g. crystal-less) Ethernet clocking.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
[stefan@agner.ch: regrouped patch]
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add CCM_CCGR0_UART0_CTRL_MASK clock definition and add TX/RX iomux
definitions for UART0 (aka. SCI0).
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
[stefan@agner.ch: regrouped patch]
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The anadig_reg structure started at the wrong offset (fixed by adding
reserved_0x000[4]), was missing some reserved field required for
alignment purpose (reserved_0x094[3] between pll4_denom and pll6_ctrl)
and further contained a too short reserved field causing further miss-
alignment (reserved_0x0C4[7]). Also, rename all the reserved fields
and using a memory offset based scheme for.
Discovered and tested by temporarily putting the following debug
instrumentation into board_init():
struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR;
printf("&anadig->pll3_ctrl=0x%p\n", &anadig->pll3_ctrl);
printf("&anadig->pll5_ctrl=0x%p\n", &anadig->pll5_ctrl);
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
[stefan@agner.ch: regrouped patch]
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
After Kbuild introduction, the CROSS_COMPILE environment variable has been
set to some default value (prefix arm-linux-).
This shall be removed since it breaks building u-boot for native arm target
(like qemu ARM).
Moreover not all compilers have arm-linux- prefix.
Additionally the u-boot cross compiles with CROSS_COMPILE= set explicitly-
e.g.:
CROSS_COMPILE=/ .... /arm-v7a-linux-gnueabi- make
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Full cache line writes to the same memory region from at least two
processors might deadlock the processor. Exists on r1, r2, r3
revisions.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
A short loop including a DMB instruction might cause a denial of
service on another processor which executes a CP15 broadcast operation.
Exists on r1, r2, r3, r4 revisions.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When SoC first boots up, we should invalidate the cache but not flush it.
We can use the same function for invalid and flush mostly, with a wrapper.
Invalidating large cache can ben slow on emulator, so we postpone doing
so until I-cache is enabled, and before enabling D-cache.
Signed-off-by: York Sun <yorksun@freescale.com>
CC: David Feng <fenghua@phytium.com.cn>
|