summaryrefslogtreecommitdiff
path: root/arch/arm/mach-uniphier/Makefile
Commit message (Collapse)AuthorAgeLines
* ARM: uniphier: rework spl_boot_device() and related codeMasahiro Yamada2017-02-23-1/+1
| | | | | | | | The current implementation has ugly switch statements here and there, and duplicates similar code. Rework it using table lookups for SoC data and reduce code duplication. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: move spl_boot_mode() to a separate fileMasahiro Yamada2017-02-23-0/+1
| | | | | | | | The spl_boot_mode() is unrelated to the other code in this file. Besides, this function is only called from common/spl/spl_mmc.c, so it is reasonable to guard with CONFIG_SPL_MMC_SUPPORT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: move MMC code to a separate fileMasahiro Yamada2017-02-23-0/+1
| | | | | | | | | | Currently, arch/arm/mach-uniphier/boot-mode/boot-mode.c is messed up with unrelated code; there is no reason why the "mmcsetn" command must be placed in this file. Split out the MMC code into arch/arm/mach-uniphier/mmc-first-dev.c. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: compile board data only for SPLMasahiro Yamada2017-01-29-1/+1
| | | | | | | Now U-Boot proper need not get the uniphier_boards array. Compile it only for SPL. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: simplify SoC ID get functionMasahiro Yamada2017-01-22-2/+2
| | | | | | | | | | Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: move SBC and Support Card init code to U-Boot properMasahiro Yamada2017-01-18-3/+3
| | | | | | | | | | | | | | | Initialize SBC and Support Card in U-Boot proper instead of SPL. We may run different firmware (ex. ARM Trusted Firmware) before U-Boot, and basic SoC initialization may be done there. In that case, SPL may not be used. The motivation for preparing SBC and Support Card in SPL was to use LED for early debugging, but this is not mandatory to boot SoCs. With this commit, LED will be unavailable in SPL, but we can use a debug serial instead. So, this change will not be a big deal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: refactor spl_init_board()Masahiro Yamada2017-01-18-1/+2
| | | | | | | Merge init-*.c into a single file using a table of callbacks because the initialization flow is almost common among SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: refactor MEMCONF init codeMasahiro Yamada2017-01-17-1/+2
| | | | | | | | | | | | | | Currently, memconf-sld3.c and memconf-pxs2.c duplicate the code. There are 3 patterns in terms of MEMCONF init: - DRAM 2 channels: LD4, sLD8, Pro4, Pro5, LD11 - DRAM 3 channels: sLD3 - DRAM 3 channels (Ch2 is disable by MEMCONF[21]): Pxs2, LD20 All of them can be moved into a single file by a little more refactoring. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: collect clock/PLL init code into a single directoryMasahiro Yamada2016-09-19-3/+2
| | | | | | | | Now PLLs for DRAM controller are initialized in SPL, and the others in U-Boot proper. Setting up all of them in a single directory will be helpful when we want to share code between SPL and U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: move XIRQ pin-mux settings of LD11/LD20Masahiro Yamada2016-09-18-1/+1
| | | | | | | This is the last code in the mach-uniphier/pinctrl/ directory. Push the remaining code out to delete the directory entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: consolidate System Bus pin-mux settings for LD11/LD20Masahiro Yamada2016-09-18-1/+1
| | | | | | | Use the pin-mux data in the pinctrl drivers by directly calling pinctrl_generic_set_state(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: consolidate NAND pin-mux settingsMasahiro Yamada2016-09-18-0/+1
| | | | | | | | The NAND subsystem has not supported the Driver Model yet, but the NAND pin-mux data are already in the pinctrl drivers. Use them by calling pinctrl_generic_set_state() directly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: merge board init functions into board_init()Masahiro Yamada2016-09-14-3/+1
| | | | | | | | | | | | | | | | | | Currently, the UniPhier platform calls several init functions in the following order: [1] spl_board_init() [2] board_early_init_f() [3] board_init() [4] board_early_init_r() [5] board_late_init() The serial console is not ready at the point of [2], so we want to avoid using [2] from the view point of debuggability. Fortunately, all of the initialization in [2] can be delayed until [3]. I see no good reason to split into [3] and [4]. So, merge [2] through [4]. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: use checkboard() instead of misc_init_f()Masahiro Yamada2016-09-14-1/+0
| | | | | | | We can use checkboard() stub to show additional board information, so misc_init_f() should not be used for this purpose. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: add PH1-LD20 SoC supportMasahiro Yamada2016-04-24-0/+1
| | | | | | This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: support Debug UARTMasahiro Yamada2016-03-24-0/+1
| | | | | | | | | | | | For ARM32 architecture, CONFIG_DEBUG_LL is available for early low-level debugging (and actually UniPhier 32bit SoCs use it), but ARM64 architecture does not support it. Instead, CONFIG_DEBUG_UART is available as an architecture-independent debug facility. This commit supports it on all the UniPhier SoCs (including the new ARMv8 SoCs), which is very useful for new SoC bringups. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: prepare directory structure for ARMv8 SoC supportMasahiro Yamada2016-03-01-7/+2
| | | | | | | | | | Before adding ARMv8 support, this commit refactors the directory structure. Move ARMv7 specific files to arch/arm/mach-uniphier/arm32 to avoid a mess by mixture of ARMv7 and ARMv8 code. Also move the "select CPU_V7" to the lower-level menu because we will have to select ARM64 instead of CPU_V7 for ARMv8 SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: fix makefiles to build cmd_ddr(m)phy.cMasahiro Yamada2016-02-14-1/+2
| | | | | | | | The U-Boot proper building needs to descend arch/arm/mach-uniphier/dram to build these commands. Fixes: 93d92d46cd01 ("ARM: uniphier: add dump command for DDR Multi PHY registers") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: create early page table at run-timeMasahiro Yamada2016-02-14-1/+0
| | | | | | | | | | | | | | | | | | UniPhier SoCs are not equipped with dedicated on-chip SRAM. Instead, locked outer cache is used as RAM area during the early boot stage where DRAM is not ready yet. This effectively means MMU must be always enabled while we are in SPL. Currently, the SPL image for UniPhier SoCs contains the page table statically defined at compile time. It has been a burden because the 16KB page table occupies a quarter memory footprint of the 64KB SPL image. Finally, there is no more room to implement new features in SPL. Setting aside the NOR boot mode, this issue can be solved by creating the page table onto RAM at run time. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: move cmd_pinmon.c to boot-mode subdirectoryMasahiro Yamada2016-01-13-1/+0
| | | | | | | This command shows the boot mode pins, so it would be more at home in the boot-mode subdirectory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: move cmd_ddrphy.c to dram subdirectoryMasahiro Yamada2016-01-13-1/+0
| | | | | | | This command shows the register dump of the DDR PHY, so it would be more at home in the dram subdirectory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: merge umc/ and ddrphy/ into a single directoryMasahiro Yamada2015-12-23-1/+1
| | | | | | | | The UMC (Universal Memory Controller) and the DDR PHY block are highly related to each other. It is better to have both code in the same directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: compile uniphier_get_board_param() for U-Boot properMasahiro Yamada2015-12-23-1/+1
| | | | | | | Compile this file for U-Boot proper as well as SPL, so that the U-Boot proper can call uniphier_get_board_param(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: allow to enable multiple SoCsMasahiro Yamada2015-09-25-8/+8
| | | | | | | | | | | | | | | | | | | | Before this commit, the Kconfig menu in mach-uniphier only allowed us to choose one SoC to be compiled. Each SoC has its own defconfig file for the build-test coverage. Consequently, some defconfig files are duplicated with only the difference in CONFIG_DEFAULT_DEVICE_TREE and CONFIG_{SOC_NAME}=y. Now, most of board-specific parameters have been moved to device trees, so it makes sense to include init code of multiple SoCs into a single image as long as the SoCs have similar architecture. In fact, some SoCs of UniPhier family are very similar: - PH1-LD4 and PH1-sLD8 - PH1-LD6b and ProXstream2 (will be added in the upcoming commit) This commit will be helpful to merge some defconfig files for better maintainability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: unify low-level debug init codeMasahiro Yamada2015-09-25-0/+2
| | | | | | | Move init code of low-level debug into a single file. This is helpful to create an image that runs on multiple SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: rename CONFIG_MACH_* to CONFIG_ARCH_UNIPHIER_*Masahiro Yamada2015-09-25-4/+4
| | | | | | | I want these prefixed with CONFIG_ARCH_UNIPHIER_ to clarify they belong to UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: move CONFIG_SUPPORT_CARD_* macros to local fileMasahiro Yamada2015-09-25-1/+1
| | | | | | | It is no longer necessary to define CONFIG_SUPPORT_CARD_* globally. Move them to a C file as local macros. Also, rename the C file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: drop DCC micro support card supportMasahiro Yamada2015-09-25-2/+1
| | | | | | | | | | Historically (for compatibility with very old platforms), two different types of micro support cards have been used with the UniPhier SoC development boards. It has been painful to maintain both. Having one of them is enough. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARM: UniPhier: add PH1-sLD3 SoC supportMasahiro Yamada2015-07-23-3/+4
| | | | | | | The init code for UMC (Unified Memory Controller) and PLL has not been mainlined yet, but U-boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: UniPhier: optimize kicking secondary CPUs codeMasahiro Yamada2015-03-24-1/+0
| | | | | | | | | | | | | | Currently, the secondary CPU(s) are kicked three times: Boot ROM ---(kick)--> SPL ---(kick)--> U-boot ---(kick)--> Linux. It makes the boot sequence very complicated. This commit merges the first and the second kicks, so the secondary CPU(s) can directly jump from SPL to Linux. arch/arm/mach-uniphier/smp.S is no longer necessary. Linux boot test passed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: UniPhier: add empty lowlevel_init to U-boot properMasahiro Yamada2015-03-24-0/+1
| | | | | | | To remove the ifdef conditional of CONFIG_SKIP_LOWLEVEL_INIT, add late_lowlevel_init.S to U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: UniPhier: consolidate MEMCONF setting codeMasahiro Yamada2015-03-01-0/+1
| | | | | | | | | | This code is duplicated in ph1-ld4/sg_init.c and ph1-pro4/sg_init.c. Merge the same code into a new file, memconf.c. The helper functions no longer have to be placed in the header file. Also, move them into memconf.c. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: UniPhier: move SoC sources to mach-uniphierMasahiro Yamada2015-03-01-0/+36
Move arch/arm/cpu/armv7/uniphier/* -> arch/arm/mach-uniphier/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
generated by cgit v1.1 at 2024-07-15 06:03:21 +0000