summaryrefslogtreecommitdiff
path: root/arch/arm/mach-tegra
Commit message (Collapse)AuthorAgeLines
* ARM: Migrate errata to KconfigTom Rini2017-03-09-0/+5
| | | | | | | | | This moves all of the current ARM errata from various header files and in to Kconfig. This allows for a minor amount of cleanup as we had some instances where both a general common header file was enabling errata as well as the board config. We now just select these once at the higher level in Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_BOARD_EARLY_INIT_F to KconfigSimon Glass2017-01-25-0/+1
| | | | | | | This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org>
* Kconfig: Migrate BOARD_LATE_INIT to a selectTom Rini2017-01-24-0/+25
| | | | | | | | | This option should not really be user selectable. Note that on PowerPC we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be conditional on that. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
* serial, ns16550: bugfix: ns16550 fifo not enabledHeiko Schocher2017-01-20-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor" breaks u-boot commandline working with long commands sending to the board. Since the above patch, you have to setup the fcr register. For board/archs which enable OF_PLATDATA, the new field fcr in struct ns16550_platdata is not filled with a default value ... This leads in not setting up the uarts fifo, which ends in problems, when you send long commands to u-boots commandline. Detected this issue with automated tbot tests on am335x based shc board. The error does not popup, if you type commands. You need to copy&paste a long command to u-boots commandshell (or send a long command with tbot) Possible boards/plattforms with problems: ./arch/arm/cpu/arm926ejs/lpc32xx/devices.c ./arch/arm/mach-tegra/board.c ./board/overo/overo.c ./board/quipos/cairo/cairo.c ./board/logicpd/omap3som/omap3logic.c ./board/logicpd/zoom1/zoom1.c ./board/timll/devkit8000/devkit8000.c ./board/lg/sniper/sniper.c ./board/ti/beagle/beagle.c ./drivers/serial/serial_rockchip.c Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* mmc: move more driver config options to KconfigMasahiro Yamada2017-01-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move (and rename) the following CONFIG options to Kconfig: CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI) CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS) CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC) CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS) CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA) CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI) They are the same option names as used in Linux. This commit was created as follows: [1] Rename the options with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g ' [2] Commit the changes [3] Create entries in driver/mmc/Kconfig. (copied from Linux) [4] Move the options with the following command tools/moveconfig.py -y -r HEAD \ MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI [5] Sort and align drivers/mmc/Makefile for readability Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2017-01-10-1/+1
|\
| * SPL: make struct spl_image 64-bit safeAndre Przywara2017-01-04-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since entry_point and load_addr are addresses, they should be represented as longs to cover the whole address space and to avoid warning when compiling the SPL in 64-bit. Also adjust debug prints to add the 'l' specifier, where needed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | ARM: tegra: allow passing cboot DTB to the kernelStephen Warren2017-01-03-0/+18
|/ | | | | | | | | | | | | Some users may wish to pass the cboot-supplied DTB to the booted kernel rather than having U-Boot load the DTB itself. To allow this, expose the address of the cboot-supplied DTB in environment variable $fdt_addr. At least when using extlinux.conf, if the user doesn't explicitly specify which DTB to pass to the kernel, U-Boot passes the DTB referred to by this variable. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2016-11-08-23/+44
|\
| * ARM: tegra186: call secure monitor for all cache-wide opsStephen Warren2016-11-07-3/+21
| | | | | | | | | | | | | | | | | | An SMC call is required for all cache-wide operations on Tegra186. This patch implements the two missing hooks now that U-Boot supports them, and fixes the mapping of "hook name" to SMC call code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * armv8: add hooks for all cache-wide operationsStephen Warren2016-11-07-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC-specific logic may be required for all forms of cache-wide operations; invalidate and flush of both dcache and icache (note that only 3 of the 4 possible combinations make sense, since the icache never contains dirty lines). This patch adds an optional hook for all implemented cache-wide operations, and renames the one existing hook to better represent exactly which operation it is implementing. A dummy no-op implementation of each hook is provided. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: translate __asm_flush_l3_cache to assemblyStephen Warren2016-11-07-23/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When performing a cache disable function, code must not access DRAM. That is because when the cache is disabled, it will be bypassed and all loads and stores will be serviced by RAM. This prevents accessing any dirty data in the cache. In turn, this means the stack cannot be used, since that is in RAM. To guarantee that code doesn't use RAM (and in particular the stack) __asm_flush_l3_cache() must be manually implemented in assembly, rather than implemented in C since the compiler won't know not to touch RAM. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: ensure nvtboot_boot_x0 alignmentStephen Warren2016-11-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | nvtboot_boot_x0 is a 64-bit variable and hence must be 64-bit aligned. So far this has happened by accident! Fix the code so this is guaranteed. This fixes the following build error: ... relocation truncated to fit: R_AARCH64_LDST64_ABS_LO12_NC against symbol `nvtboot_boot_x0' ... Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: configure Ethernet address on Tegra186Stephen Warren2016-11-07-0/+55
| | | | | | | | | | | | | | | | | | | | | | On Tegra186, the bootloader which runs before U-Boot passes the Ethernet MAC address to U-Boot using device tree. Extract this value and write it to the environment, so that the Ethernet uclass picks it up and uses it for the built-in Ethernet device. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | ARM: tegra: add SoC-level hook for board_late_init()Stephen Warren2016-11-07-1/+6
|/ | | | | | | | | | | | | Extend the Tegra186 implementation of board_late_init() to call a per-SoC "hook" function. This will allow SoC-specific (rather than Tegra-wide) functionality to be implemented without the core Tegra code needing to be aware of the details. While board186.c is currently only used for Tegra186, it should be applicable to any other future SoC, and perhaps its simple design could be back-ported to older SoCs in the future too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* drivers/pci/Kconfig: Add PCITom Rini2016-10-27-2/+0
| | | | | | | Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* Fix codying style broken by recent libfdt syncMasahiro Yamada2016-10-24-1/+1
| | | | | | | | | Commit b02e4044ff8e ("libfdt: Bring in upstream stringlist functions") broke codying style in some places especially by inserting an extra whitespace before fdt_stringlist_count(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
* libfdt: Sync fdt_for_each_subnode() with upstreamSimon Glass2016-10-13-2/+2
| | | | | | | | | | | The signature for this macro has changed. Bring in the upstream version and adjust U-Boot's usages to suit. Signed-off-by: Simon Glass <sjg@chromium.org> Update to drivers/power/pmic/palmas.c: Signed-off-by: Keerthy <j-keerthy@ti.com> Change-Id: I6cc9021339bfe686f9df21d61a1095ca2b3776e8
* libfdt: Bring in upstream stringlist functionsSimon Glass2016-10-13-7/+7
| | | | | | | | | | | | | | These have now landed upstream. The naming is different and in one case the function signature has changed. Update the code to match. This applies the following upstream commits by Thierry Reding <treding@nvidia.com> : 604e61e fdt: Add functions to retrieve strings 8702bd1 fdt: Add a function to get the index of a string 2218387 fdt: Add a function to count strings Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM: tegra: reduce DRAM size mapped into MMU on ARM64Stephen Warren2016-10-10-1/+1
| | | | | | | | | | | | | | | | | ARM CPUs can architecturally (speculatively) prefetch completely arbitrary normal memory locations, as defined by the current translation tables. The current MMU configuration for 64-bit Tegras maps an extremely large range of addresses as DRAM, well beyond the actual physical maximum DRAM window, even though U-Boot only needs access to the first 2GB of DRAM; the Tegra port of U-Boot deliberately limits itself to 2GB of RAM since some HW modules on at least some 64-bit Tegra SoCs can only access a 32-bit physical address space. This change reduces the amount of RAM mapped via the MMU to disallow the CPU from ever speculatively accessing RAM that U-Boot will definitely not access. This avoids the possibility of the HW raising SError due to accesses to always-invalid physical addresses. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: flush caches via SMC callStephen Warren2016-09-27-0/+24
| | | | | | | | | | On Tegra186, it is necessary to perform an SMC to fully flush all caches; flushing/cleaning by set/way is not enough. Implement the required hook to make this happen. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: enable standard clock/reset APIs everywhereStephen Warren2016-09-27-3/+11
| | | | | | | | | | | Implementations of the standard clock and reset APIs are available on all Tegra SoCs now, so enable compilation of those uclasses. Enable the Tegra CAR drivers for all SoCs prior to the BPMP being available. This provides an implementation of those APIs everywhere. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: fix clock_get_periph_rate() for UART clocksStephen Warren2016-09-27-2/+36
| | | | | | | | | | | | | | | | | | | | | | Make clock_get_periph_rate() return the correct value for UART clocks. This change needs to be applied before the patches that enable CONFIG_CLK for Tegra SoCs before Tegra186, since enabling that option causes ns16550_serial_ofdata_to_platdata() to rely on clk_get_rate() for UART clocks, and clk_get_rate() eventually calls clock_get_periph_rate(). This change is a rather horrible hack, as explained in the comment added to the clock driver. I've tried fixing this correctly for all clocks as described in that comment, but there's too much fallout elsewhere. I believe the clock driver has a number of bugs which all cancel each-other out, and unravelling that chain is too complex at present. This change is the smallest change that fixes clock_get_periph_rate() for UART clocks while guaranteeing no change in behaviour for any other clock, which avoids other regressions. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: add APIs the clock uclass driver will needStephen Warren2016-09-27-86/+283
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | A future patch will implement a clock uclass driver for Tegra. That driver will call into Tegra's existing clock code to simplify the transition; this avoids tieing the clock uclass patches into significant refactoring of the existing custom clock API implementation. Some of the Tegra clock APIs that manipulate peripheral clocks require both the peripheral clock ID and parent clock ID to be passed in together. However, the clock uclass API does not require any such "parent" parameter, so the clock driver must determine this information itself. This patch implements new Tegra- specific clock API clock_get_periph_parent() for this purpose. The new API is implemented in the core Tegra clock code rather than SoC- specific clock code. The implementation uses various SoC-/clock-specific data. That data is only available in SoC-specific clock code. Consequently, two new internal APIs are added that enable the core clock code to retrieve this information from the SoC-specific clock code. Due to the structure of the Tegra clock code, this leads to some unfortunate code duplication. However, this situation predates this patch. Ideally, future work will de-duplicate the Tegra clock code, and migrate it into drivers/clk/tegra. However, such refactoring is kept separate from this series. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: add peripheral clock init tableStephen Warren2016-09-27-0/+128
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, Tegra peripheral drivers control two aspects of their HW module clock(s): 1) The clock enable/rate for the peripheral clock itself. 2) The system-level clock tree setup, i.e. the clock parent. Aspect 1 is reasonable, but aspect 2 is a system-level decision, not something that an individual peripheral driver should in general know about or influence. Such system-level knowledge ties the driver to a specific SoC implementation, even when they use generic APIs for clock manipulation, since they must have SoC-specific knowledge such as parent clock IDs. Limited exceptions exist, such as where peripheral HW is expected to dynamically switch between clock sources at run-time, such as CPU clock scaling or display clock conflict management in a multi-head scenario. This patch enhances the Tegra core code to perform system-level clock tree setup, in a similar fashion to the Linux kernel Tegra clock driver. This will allow future patches to simplify peripheral drivers by removing the clock parent setup logic. This change is required prior to converting peripheral drivers to use the standard clock APIs, since: 1) The clock uclass doesn't currently support a set_parent() operation. Adding one is possible, but not necessary at the moment. 2) The clock APIs retrieve all clock IDs from device tree, and the DT bindings for almost all peripherals only includes information about the relevant peripheral clocks, and not any potential parent clocks. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* mmc: tegra: Add DM_MMC support to Tegra MMC driverTom Warren2016-09-27-24/+1
| | | | | | | | | | | Convert the Tegra MMC driver to DM_MMC. Support for non-DM is removed to avoid ifdefs in the code. DM_MMC is now enabled for all Tegra builds. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Warren <twarren@nvidia.com> (swarren, fixed some NULL pointer dereferences, removed extraneous changes, rebased on various other changes, removed non-DM support etc.) Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: set MMC pin mux in board_init()Stephen Warren2016-09-27-7/+5
| | | | | | | | | Most other pin mux is configured in this function. This removes the need to do it in an MMC-specific initialization function, which is good since that function is going away later in this series. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* mmc: tegra: move pad_init_mmc() into MMC driverStephen Warren2016-09-27-34/+0
| | | | | | | | | | pad_init_mmc() is performing an SoC-specific operation, using registers within the MMC controller. There's no reason to implement this code outside the MMC driver, so move it inside the driver. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-2/+2
| | | | | | | | | | | Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SPL_SERIAL_SUPPORT to KconfigSimon Glass2016-09-16-0/+3
| | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_SPL_LIBGENERIC_SUPPORT to KconfigSimon Glass2016-09-16-0/+3
| | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_SPL_LIBCOMMON_SUPPORT to KconfigSimon Glass2016-09-16-0/+3
| | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_SPL_GPIO_SUPPORT to KconfigSimon Glass2016-09-16-0/+3
| | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM: armv7: move CONFIG_ARMV7_PSCI to KconfigMasahiro Yamada2016-09-07-0/+1
| | | | | | | | | Add ARCH_SUPPORT_PSCI as a non-configurable option that platforms can select. Then, move CONFIG_ARMV7_PSCI, which is automatically enabled if both ARMV7_NONSEC and ARCH_SUPPORT_PSCI are enabled. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: tegra: remove wrong dependency on SPL_BUILDMasahiro Yamada2016-09-07-2/+2
| | | | | | | SPL_BUILD is not a CONFIG in Kconfig, so !SPL_BUILD is always true. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: tegra: Add support for TK1-SOM board from Colorado EngineeringPeter Chubb2016-09-01-0/+12
| | | | | | | | | | | | | | The Colorado TK1 SOM is a small form factor board similar to the Jetson TK1. The main differences lie in the pinmux, and in that the PCIe controller is set to use in 4lanes+1lane, rather than 2+2. The pinmux header here was generated from a spreadsheet provided by Colorado Engineering using the tegra-pinmux scripts. The spreadsheet was converted from v09 to v11 by me. Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: reduce CSITE clock from 204M to 136MBryan Wu2016-08-15-1/+1
| | | | | | | | | | | The L4T kernel complains about a CSITE clock rate above 144MHz, presumably because the HW is only characterized for a clock less than that. Adjust the rate to 136MHz to avoid the warning and stay in spec. Signed-off-by: Bryan Wu <pengw@nvidia.com> (swarren, re-wrote commit description) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: move ft_system_setup()Stephen Warren2016-08-15-31/+35
| | | | | | | | | | | Currently, ft_system_setup() is implemented by board*.c, which are a bit of a dumping ground for a bunch of unrelated functionality, and separate versions exist for pre-Tegra186 and Tegra186. Move the implementation into a separate file to separate functionality, and allow sharing. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* reset: add Tegra186 reset driverStephen Warren2016-08-15-0/+2
| | | | | | | | | | | In Tegra186, on-SoC reset signals are manipulated using IPC requests to the BPMP (Boot and Power Management Processor). This change implements a driver that does that. It is unconditionally selected by CONFIG_TEGRA186 since virtually any Tegra186 build of U-Boot will need the feature. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* clock: add Tegra186 clock driverStephen Warren2016-08-15-0/+2
| | | | | | | | | | | | In Tegra186, on-SoC clocks are manipulated using IPC requests to the BPMP (Boot and Power Management Processor). This change implements a driver that does that. A tegra/ sub-directory is created to follow the existing pattern. It is unconditionally selected by CONFIG_TEGRA186 since virtually any Tegra186 build of U-Boot will need the feature. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* misc: add Tegra BPMP driverStephen Warren2016-08-15-0/+2
| | | | | | | | | | | | | | | The Tegra BPMP (Boot and Power Management Processor) is a separate auxiliary CPU embedded into Tegra to perform power management work, and controls related features such as clocks, resets, power domains, PMIC I2C bus, etc. This driver provides the core low-level communication path by which feature-specific drivers (such as clock) can make requests to the BPMP. This driver is similar to an MFD driver in the Linux kernel. It is unconditionally selected by CONFIG_TEGRA186 since virtually any Tegra186 build of U-Boot will need the feature. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2016-08-05-1/+6
|\
| * ARM: tegra: call tegra_board_init on Tegra186Stephen Warren2016-08-04-1/+6
| | | | | | | | | | | | | | | | | | | | Introduce tegra_board_init() and call it from board_init(). Tegra wil use tegra_board_init() for board-specific initialization, and board_init() for SoC-specific initialization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: Rework and correct barrier definitionsTom Rini2016-08-05-1/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of testing booting Linux kernels on Rockchip devices, it was discovered by Ziyuan Xu and Sandy Patterson that we had multiple and for some cases incomplete isb definitions. This was causing a failure to boot of the Linux kernel. In order to solve this problem as well as cover any corner cases that we may also have had a number of changes are made in order to consolidate things. First, <asm/barriers.h> now becomes the source of isb/dsb/dmb definitions. This however introduces another complexity. Due to needing to build SPL for 32bit tegra with -march=armv4 we need to borrow the __LINUX_ARM_ARCH__ logic from the Linux Kernel in a more complete form. Move this from arch/arm/lib/Makefile to arch/arm/Makefile and add a comment about it. Now that we can always know what the target CPU is capable off we can get always do the correct thing for the barrier. The final part of this is that need to be consistent everywhere and call isb()/dsb()/dmb() and NOT call ISB/DSB/DMB in some cases and the function names in others. Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Sandy Patterson <apatterson@sightlogix.com> Reported-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reported-by: Sandy Patterson <apatterson@sightlogix.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: tegra: pick up actual memory sizeStephen Warren2016-07-21-12/+110
| | | | | | | | | | | | | | | | | | | | | | | On Tegra186, U-Boot is booted by the binary firmware as if it were a Linux kernel. Consequently, a DTB is passed to U-Boot. Cache the address of that DTB, and parse the /memory/reg property to determine the actual RAM regions that U-Boot and subsequent EL2/EL1 SW may actually use. Given the binary FW passes a DTB to U-Boot, I anticipate the suggestion that U-Boot use that DTB as its control DTB. I don't believe that would work well, so I do not plan to put any effort into this. By default the FW-supplied DTB is the L4T kernel's DTB, which uses non-upstreamed DT bindings. U-Boot aims to use only upstreamed DT bindings, or as close as it can get. Replacing this DTB with a DTB using upstream bindings is physically quite easy; simply replace the content of one of the GPT partitions on the eMMC. However, the binary FW at least partially relies on the existence/content of some nodes in the DTB, and that requires the DTB to be written according to downstream bindings. Equally, if U-Boot continues to use appended DTBs built from its own source tree, as it does for all other Tegra platforms, development and deployment is much easier. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: add IVC protocol implementationStephen Warren2016-07-21-0/+563
| | | | | | | | | | | | IVC (Inter-VM Communication) protocol is a Tegra-specific IPC (Inter Processor Communication) framework. Within the context of U-Boot, it is typically used for communication between the main CPU and various auxiliary processors. In particular, it will be used to communicate with the BPMP (Boot and Power Management Processor) on Tegra186 in order to manipulate clocks and reset signals. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: unify Tegra186 Makefile a bitStephen Warren2016-07-21-9/+6
| | | | | | | | | | | | | | | Many files in arch/arm/mach-tegra are compiled conditionally based on Kconfig variables, or applicable to all platforms. We can let the main Tegra Makefile handle compiling (or not) those files to avoid each SoC- specific Makefile needing to duplicate entries for those files. This leaves the SoC-specific Makefiles to compile truly SoC-specific code. In the future, we'll hopefully add Kconfig variables for all the other files, and refactor those files, and so reduce the need for SoC-specific Makefiles and/or ifdefs in the Makefiles. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-07-19-2/+4
|\ | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/cpu/armv8/Makefile arch/arm/lib/bootm-fdt.c
| * armv8: mmu: Add support of non-identical mappingYork Sun2016-07-15-2/+4
| | | | | | | | | | | | | | Introduce virtual and physical addresses in the mapping table. This change have no impact on existing boards because they all use idential mapping. Signed-off-by: York Sun <york.sun@nxp.com>
* | Various, unrelated tree-wide typo fixes.Robert P. J. Day2016-07-16-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a number of typos, including: * "compatble" -> "compatible" * "eanbeld" -> "enabled" * "envrionment" -> "environment" * "FTD" -> "FDT" (for "flattened device tree") * "ommitted" -> "omitted" * "overriden" -> "overridden" * "partiton" -> "partition" * "propogate" -> "propagate" * "resourse" -> "resource" * "rest in piece" -> "rest in peace" * "suport" -> "support" * "varible" -> "variable" Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
generated by cgit v1.1 at 2024-11-01 10:36:17 +0000