summaryrefslogtreecommitdiff
path: root/arch/arm/mach-sunxi
Commit message (Collapse)AuthorAgeLines
* sunxi: musb: Power off OTG port VBUS when disabledChen-Yu Tsai2016-09-17-7/+0
| | | | | | | | | | | | | | The Linux kernel musb driver expects VBUS to be off while initializing musb. Having it on results in a repeating string of warnings, followed by an unusable peripheral. The peripheral is only usable after physically removing the OTG adapter, letting musb reset its state. This partially reverts commit c9f8947e6604 ("sunxi: usb-phy: Never power off the usb ports") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Tune H3 DRAM PLL to improve lock timeJens Kuske2016-08-26-0/+6
| | | | | | | | | | | | The H3 PLL5 used for DRAM barely manages to lock to the required frequency before DRAM controller starts, sometimes leading to wrong delay-line calibration results. This patch changes the PLL tuning parameters to the same values as boot0 used, which speeds up the locking and fixes the problem. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: Rework and correct barrier definitionsTom Rini2016-08-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of testing booting Linux kernels on Rockchip devices, it was discovered by Ziyuan Xu and Sandy Patterson that we had multiple and for some cases incomplete isb definitions. This was causing a failure to boot of the Linux kernel. In order to solve this problem as well as cover any corner cases that we may also have had a number of changes are made in order to consolidate things. First, <asm/barriers.h> now becomes the source of isb/dsb/dmb definitions. This however introduces another complexity. Due to needing to build SPL for 32bit tegra with -march=armv4 we need to borrow the __LINUX_ARM_ARCH__ logic from the Linux Kernel in a more complete form. Move this from arch/arm/lib/Makefile to arch/arm/Makefile and add a comment about it. Now that we can always know what the target CPU is capable off we can get always do the correct thing for the barrier. The final part of this is that need to be consistent everywhere and call isb()/dsb()/dmb() and NOT call ISB/DSB/DMB in some cases and the function names in others. Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Sandy Patterson <apatterson@sightlogix.com> Reported-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reported-by: Sandy Patterson <apatterson@sightlogix.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-07-19-2/+4
|\ | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/cpu/armv8/Makefile arch/arm/lib/bootm-fdt.c
| * armv8: mmu: Add support of non-identical mappingYork Sun2016-07-15-2/+4
| | | | | | | | | | | | | | Introduce virtual and physical addresses in the mapping table. This change have no impact on existing boards because they all use idential mapping. Signed-off-by: York Sun <york.sun@nxp.com>
* | sunxi: Use BROM stored boot_media value to determine our boot-sourceHans de Goede2016-07-15-23/+11
| | | | | | | | | | | | | | | | | | Now that we know that the BROM stores a value indicating the boot-source at the beginning of SRAM, use that instead of trying to recreate the BROM's boot probing. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sunxi: Support booting from SPI flashSiarhei Siamashka2016-07-15-0/+5
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allwinner devices support SPI flash as one of the possible bootable media type. The SPI flash chip needs to be connected to SPI0 pins (port C) to make this work. More information is available at: https://linux-sunxi.org/Bootable_SPI_flash This patch adds the initial support for booting from SPI flash. The existing SPI frameworks are not used in order to reduce the SPL code size. Right now the SPL size grows by ~370 bytes when CONFIG_SPL_SPI_SUNXI option is enabled. While there are no popular Allwinner devices with SPI flash at the moment, testing can be done using a SPI flash module (it can be bought for ~2$ on ebay) and jumper wires with the boards, which expose relevant pins on the expansion header. The SPI flash chips themselves are very cheap (some prices are even listed as low as 4 cents) and should not cost much if somebody decides to design a development board with an SPI flash chip soldered on the PCB. Another nice feature of the SPI flash is that it can be safely accessed in a device-independent way (since we know that the boot ROM is already probing these pins during the boot time). And if, for example, Olimex boards opted to use SPI flash instead of EEPROM, then they would have been able to have U-Boot installed in the SPI flash now and boot the rest of the system from the SATA hard drive. Hopefully we may see new interesting Allwinner based development boards in the future, now that the software support for the SPI flash is in a better shape :-) Testing can be done by enabling the CONFIG_SPL_SPI_SUNXI option in a board defconfig, then building U-Boot and finally flashing the resulting u-boot-sunxi-with-spl.bin binary over USB OTG with a help of the sunxi-fel tool: sunxi-fel spiflash-write 0 u-boot-sunxi-with-spl.bin The device needs to be switched into FEL (USB recovery) mode first. The most suitable boards for testing are Orange Pi PC and Pine64. Because these boards are cheap, have no built-in NAND/eMMC and expose SPI0 pins on the Raspberry Pi compatible expansion header. The A13-OLinuXino-Micro board also can be used. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* common: Pass the boot device into spl_boot_mode()Marek Vasut2016-06-26-1/+1
| | | | | | | | | | | | | | | | | | The SPL code already knows which boot device it calls the spl_boot_mode() on, so pass that information into the function. This allows the code of spl_boot_mode() avoid invoking spl_boot_device() again, but it also lets board_boot_order() correctly alter the behavior of the boot process. The later one is important, since in certain cases, it is desired that spl_boot_device() return value be overriden using board_boot_order(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [add newly introduced zynq variant] Signed-aff-by: Andreas Bießmann <andreas@biessmann.org>
* sunxi: Properly announce BOOT_DEVICE_BOARD as "FEL"Bernhard Nortmann2016-05-25-0/+9
| | | | | | | | | | | This addresses a cosmetic issue when booting a sunxi device over USB (FEL mode), where the SPL currently would just print "Trying to boot from ". The patch fixes that to properly read "Trying to boot from FEL". Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: power: add AXP809 supportChen-Yu Tsai2016-05-25-3/+4
| | | | | | | | The A80 uses the AXP809 as its primary PMIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* arm/arm64: Move barrier instructions into separate headerAndre Przywara2016-05-12-1/+1
| | | | | | | | | | | | | | | | Commit bfb33f0bc45b ("sunxi: mctl_mem_matches: Add missing memory barrier") broke compilation for the Pine64, as dram_helper.c now includes <asm/armv7.h>, which does not compile on arm64. Fix this by moving all barrier instructions into a separate header file, which can easily be shared between arm and arm64. Also extend the inline assembly to take the "sy" argument, which is optional for ARMv7, but mandatory for v8. This fixes compilation for 64-bit sunxi boards (Pine64). Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: mctl_mem_matches: Add missing memory barrierHans de Goede2016-04-27-0/+2
| | | | | | | | | | | | | | | | | | | | | | | We are running with the caches disabled when mctl_mem_matches gets called, but the cpu's write buffer is still there and can still get in the way, add a memory barrier to fix this. This avoids mctl_mem_matches always returning false in some cases, which was resulting in: U-Boot SPL 2015.07 (Apr 14 2016 - 18:47:26) DRAM: 1024 MiB U-Boot 2015.07 (Apr 14 2016 - 18:47:26 +0200) Allwinner Technology CPU: Allwinner A23 (SUN8I) DRAM: 512 MiB Where 512 MiB is the right amount, but the DRAM controller would be initialized for 1024 MiB. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add INITIAL_USB_SCAN_DELAY Kconfig optionHans de Goede2016-04-12-0/+7
| | | | | | | | | Some boards have on board usb devices which need longer than the USB spec's 1 second to connect from board powerup. Add a config option which when non 0 adds an extra delay before the first usb bus scan. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add support for Allwinner A64 SoCsSiarhei Siamashka2016-04-01-1/+32
| | | | | | | | | | | | | | | The Allwinner A64 SoC is used in the Pine64. This patch adds all bits necessary to compile U-Boot for it running in AArch64 mode. Unfortunately SPL is not ready yet due to legal problems, so we need to boot using the binary boot0 for now. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: remove SPL code, move to AArch64] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Explicitly cast u32 pointer conversionsAlexander Graf2016-04-01-4/+4
| | | | | | | | | | | Some parts of the sunxi code cast explicitly between u32 values and pointers. This is not a problem in practice, because all 64bit SoCs today only use the lower 32 bits for their phyical address space. But we need to make sure that the compiler is sure this is not an accident as well. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Move cpu independent code to mach directoryAlexander Graf2016-04-01-0/+4973
Some of the code in arch/arm/cpu/armv7/sunxi is actually armv7 specific, while most of it is just generic code that could as well be used on an AArch64 SoC. Move all files that are not really tied to armv7 into a new mach-sunxi directory. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>