summaryrefslogtreecommitdiff
path: root/arch/arm/mach-socfpga
Commit message (Collapse)AuthorAgeLines
...
* arm: socfpga: Add temporary workaround for missing SD/MMC patchesMarek Vasut2015-08-08-0/+6
| | | | | | | | | | | | Add a small workaround into the platform code which forces the SDMMC into 8-bit mode (the default configuration for all socfpga platforms) to work around breakage caused by missing patches in mainline which switch the probing of SD/MMC to OF instead of static configuraiton. The patches will hit mainline after the SPL series, so to avoid build issues, add this small temporary workaround. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: Wrap SOCFPGA_SDR_ADDRESS into SDR_PHYGRP.*ADDRESSMarek Vasut2015-08-08-1/+1
| | | | | | | Just trim down the constant SOCFPGA_SDR_ADDRESS + SDR_PHYGRP.*ADDRESS in the code. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: config: Move SPL GD and malloc to RAMMarek Vasut2015-08-08-0/+3
| | | | | | | | | | | Now that the SPL structure is organised such that it matches the U-Boot's SPL design, it is possible to use the option of relocating GD to RAM. And since we have GD in RAM, move malloc area to RAM as well. We point the malloc base pointer 1 MiB past U-Boot's load address. We use simple malloc for SPL because it is 3kiB smaller in terms of code size than regular malloc which was used thus far. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: misc: Reset ethernet from OFMarek Vasut2015-08-08-19/+49
| | | | | | | | | | | Reset the GMAC ethernets based on the "resets" OF node instead of ad-hoc hardcoded values in the U-Boot code. Since we don't have a proper reset framework in place yet, we have to do this slightly ad-hoc parsing of the OF tree instead. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
* arm: socfpga: misc: Probe ethernet GMAC from OFMarek Vasut2015-08-08-3/+1
| | | | | | | | | The GMAC can now be probed from OF, so enable DM ethernet and remove the old ad-hoc designware_initialize() invocation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
* arm: socfpga: misc: Export bootmode into environment variableMarek Vasut2015-08-08-11/+23
| | | | | | | | setenv an environment variable called "bootmode" , which contains the board boot mode. This can be in turn used in scripts to determine from where to load kernel and such. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: misc: Add support for printing boot modeMarek Vasut2015-08-08-0/+13
| | | | | | | Add support for printing from which device the SoCFPGA board booted. This decodes the BSEL settings and prints it in human readable form. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: misc: Fix warm resetMarek Vasut2015-08-08-0/+10
| | | | | | | | | | | | | | Write necessary magic value into the Warm Boot from ON-Chip RAM group Enable register to enable Warm reset support. Instead of doing this in the reset_cpu() function, we do it in arch early init to avoid breaking old kernel code which expects this magic value to be already written into this register. This magic is originally excavated from common/spl/spl.c in the u-boot port from altera, where this value was written just before the SPL jumped to actual U-Boot in the RAM. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Add support for selecting boot device from BSELMarek Vasut2015-08-08-12/+23
| | | | | | | | Rework spl_boot_device() such that it reads the BSEL settings from system manager and decides from where to load U-Boot based on this information. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Add support for booting from QSPIMarek Vasut2015-08-08-1/+4
| | | | | | | Add code and configuration options to support booting from QSPI NOR. Enable support for booting from QSPI NOR. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Add support for booting from SD/MMCMarek Vasut2015-08-08-0/+17
| | | | | | | | | | Add code and configuration options to support booting from RAW SD/MMC card as well as for ext4/vfat filesystems. Enable support for booting from SD/MMC card, but don't enable the filesystem support just yet to retain compatibility with old SoCFPGA card format. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Remove custom linker scriptMarek Vasut2015-08-08-45/+0
| | | | | | | | Remove the custom SPL linker script, use the generic one instead. The custom script doesn't bring in anything new and is only burden to maintain. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Merge spl_board_init() into board_init_f()Marek Vasut2015-08-08-17/+12
| | | | | | | | | | The code in spl_board_init() should have been in board_init_f() from the beginning, since it is code which configures system and then starts DRAM. Thus, it cannot be in spl_board_init(), which is called from board_init_r() , which already expects a working DRAM. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Add missing reset logicMarek Vasut2015-08-08-1/+9
| | | | | | | | Make sure that all the peripherals are correctly reset and then brought out of reset in the SPL. Not going through proper reset cycle might leave the IP blocks in inconsistent state. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Configure SCU and NIC-301 earlyMarek Vasut2015-08-08-0/+22
| | | | | | | | | Configure the ARM SCU and NIC301 very early. The ARM SCU SNSAC register must be configured, so we can access all peripherals. The NIC-301 must be configured so that the BootROM is not mapped into the SDRAM address space. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Toggle warm reset config I/O bitMarek Vasut2015-08-08-0/+5
| | | | | | | Synchronise the SPL behavior with the original Altera code and toggle the Warm Reset Config I/O bit accordingly. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: system: Clean up pinmux_config.cMarek Vasut2015-08-08-4/+7
| | | | | | | | | | | | | | | Implement new accessor, sysmgr_get_pinmux_table(), used to obtain pinmux table and it's size from the QTS-generated pinmux_config.c. The target here is again to get rid of poluting global namespace by including the pinmux_config.h into it. Furthermore, the pinmux_config.h declares some CONFIG_HPS_* macros, which are explicitly useless to us in U-Boot. Instead, U-Boot does use DT to detect exactly these configuration options. This patch makes sure that while this QTS-generated file can stay in the tree, these obscure macros do not ooze into the namespace anymore. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: system: Rework sysmgr_enable_warmrstcfgio()Marek Vasut2015-08-08-5/+9
| | | | | | | | Rework sysmgr_enable_warmrstcfgio() into sysmgr_config_warmrstcfgio(), which allows both enabling and disabling the warm reset config I/O functionality. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: scan: Zap iocsr_scan_chain*_table()Marek Vasut2015-08-08-31/+11
| | | | | | | | | | | | | | | | | | | | | | Introduce accessor iocsr_get_config_table() for retrieving IOCSR config tables. This patch is again trimming down the namespace polution. The IOCSR config tables are used only by scan manager, they are generated by qts and are board specific. Before this patch, the approach to use these tables in scan manager was to define an extern variable to silence the compiler and compile board-specific iocsr_config.c into U-Boot which defined those extern variables. Furthermore, since these are tables and the scan manager needs to know the size of those tables, iocsr_config.h is included build-wide. This patch wraps all this into a single accessor which takes the scan chain ID and returns pointer to the table and it's size. All this is wrapped in wrap_iocsr_config.c board-specific file. The file includes the iocsr_config.c (!) to access the original tables and transitively iocsr_config.h . It is thus no longer necessary to include iocsr_config.h build-wide and the namespace polution is trimmed some more. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: scan: Zap redundant params in scan_mgr_io_scan_chain_prg()Marek Vasut2015-08-08-13/+26
| | | | | | | | | It is sufficient to pass in the scan chain ID into the function to determine the remaining two parameters, so drop those params and determine them locally in the function. The big-ish switch in the function is temporary and will be replaced by a proper function call in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: scan: Staticize scan_mgr_io_scan_chain_prg()Marek Vasut2015-08-08-16/+9
| | | | | | | | This function is never used outside of scan_manager.c , so make it static. Zap the prototype in scan_manager.h and move the documentation above the function. Make the documentation kerneldoc compliant. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: clock: Clean up pll_config.hMarek Vasut2015-08-08-126/+24
| | | | | | | | | | | | | | | | | | | | | | | Extract the clock configuration horribleness caused by pll_config.h in the following manner. First of all, introduce a few new accessors which return values of various clocks used in clock_manager.c and use them in clock_manager.c . These accessors replace those few macros which came from pll_config.h originally. Also introduce an accessor which returns the struct cm_config default configuration for the clock manager used in SPL. The accessors are implemented in a board-specific wrap_pll_config.c file, whose sole purpose is to include the qts-generated pll_config.h and provide only the necessary values to the clock manager. The purpose of this design is to limit the scope of inclusion for the pll_config.h , which thus far was included build-wide and poluted the namespace. With this change, the inclusion is limited to just the new wrap_pll_config.c file, which in turn provides three simple functions for the clock_manager.c to use. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: clock: Get rid of cm_config_t typedefMarek Vasut2015-08-08-5/+5
| | | | | | Get rid of this cryptic typedef and replace it with explicit struct cm_config. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: reset: Add SDMMC, QSPI and DMA definesMarek Vasut2015-08-08-0/+3
| | | | | | | Add SDMMC, QSPI and DMA reset defines. These are needed by SPL so that we can boot from SD card and QSPI. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: reset: Add function to reset add peripheralsMarek Vasut2015-08-08-0/+14
| | | | | | | Add socfpga_per_reset_all() function to reset all peripherals but the L4 watchdog. This is needed in the SPL. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: reset: Repair bridge reset handlingMarek Vasut2015-08-08-4/+4
| | | | | | | | | | | The current bridge reset code, which de-asserted the bridge reset, was activelly polling whether the FPGA is programmed and ready and in case it was (!), the code called hang(). This makes no sense at all. Repair it such that the code instead checks whether the FPGA is programmed, but without any polling involved, and only if it is programmed, it de-asserts the reset. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: reset: Replace ad-hoc reset functionsMarek Vasut2015-08-08-64/+13
| | | | | | | | Replace all those ad-hoc reset functions, which were all copies of the same invocation of clrbits_le32() anyway, with one single unified function, socfpga_per_reset(), with necessary parameters. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: reset: Implement unified function to toggle resetMarek Vasut2015-08-08-23/+37
| | | | | | | | Implement function socfpga_per_reset(), which allows asserting or de-asserting reset of each reset manager peripheral in a unified manner. Use this function throughout reset manager. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: reset: Start reworking the SoCFPGA reset managerMarek Vasut2015-08-08-19/+50
| | | | | | | | | | Implement macro SOCFPGA_RESET(name), which produces an abstract reset number. Implement macros which allow extracting the reset offset in permodrstN register and which permodrstN register the reset is located in from this abstract reset number. Use these macros throughout the reset manager. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: reset: Add missing reset manager regsMarek Vasut2015-08-08-0/+2
| | | | | | | Define two missing reset manager registers, which are in the SoCFPGA CV datasheet. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: Move struct sdram_prot_rule prototypeMarek Vasut2015-08-08-13/+0
| | | | | | | | | | | Move the structure prototype from sdram.h header file into sdram.c source file, since it is used only there and for local purpose only. There is no point in having it global. While at this move, fix the data types in the structure from uintNN_t to uNN and fix the coding style a bit. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Move sdram_config.h to board dirMarek Vasut2015-08-08-100/+0
| | | | | | | This file is absolutelly positively board specific, so move it into the correct place. Signed-off-by: Marek Vasut <marex@denx.de>
* driver/ddr/altera: Add DDR driver for Altera's SDRAM controllerDinh Nguyen2015-08-08-12/+399
| | | | | | | | This patch enables the SDRAM controller that is used on Altera's SoCFPGA family. This patch configures the SDRAM controller based on a configuration file that is generated from the Quartus tool, sdram_config.h. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arch: Make board selection choices optionalJoe Hershberger2015-05-12-0/+1
| | | | | | | | | | | | By making the board selections optional, every defconfig will include the board selection when running savedefconfig so if a new board is added to the top of the list of choices the former top's defconfig will still be correct. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
* ARM: socfpga: move SoC headers to mach-socfpga/include/machMasahiro Yamada2015-05-07-0/+1061
| | | | | | Move headers to mach-socfpga as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: socfpga: move SoC sources to mach-socfpgaMasahiro Yamada2015-05-07-0/+1875
| | | | | | Our recent trend is to collect SoC files into arch/arm/mach-(SOC). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: socfpga: move board select into mach-socfpga/KconfigMasahiro Yamada2015-05-07-0/+27
Switch to a more standard way of board select; put the SoC select into arch/arm/Kconfig and move the board select menu under arch/arm/mach-socfpga/Kconfig. Also, consolidate SYS_BOARD, SYS_VENDOR, SYS_SOC, SYS_CONFIG_NAME. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>