summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mvebu
Commit message (Collapse)AuthorAgeLines
* arm: mvebu: Add SPL SDIO/MMC boot supportStefan Roese2015-07-24-1/+12
| | | | | | | | | | | | This patch adds basic SDIO/MMC booting support to MVEBU SoC's. Since I don't know of a way to test the boot-device upon runtime, this patch hardcodes the spl_boot_device instead. Tested on Marvell DB-88F6820-GP board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
* arm: mvebu: a38x: Use correct PEX register access macrosStefan Roese2015-07-23-0/+4
| | | | | | | Remove the incorrect PEX macros from the DDR header. And insert the correct ones in ctrl_pex.h instead. Signed-off-by: Stefan Roese <sr@denx.de>
* arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directoryStefan Roese2015-07-23-2/+2
| | | | | | | | | | | | | | | | With the upcoming addition of the Armada 38x DDR support, which is not compatible to the Armada XP DDR init code, we need to introduce a new directory infrastructure. To support multiple Marvell DDR controller. This will be the new structure: drivers/ddr/marvell/axp Supporting Armada XP (AXP) devices (and perhaps Armada 370) drivers/ddr/marvell/a38x Supporting Armada 38x devices (and perhaps Armada 39x) Signed-off-by: Stefan Roese <sr@denx.de>
* arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdrStefan Roese2015-07-23-0/+5204
| | | | | | | | This code is ported from the Marvell bin_hdr code into mainline SPL U-Boot. It needs to be executed very early so that the devices connected to the serdes PHY are configured correctly. Signed-off-by: Stefan Roese <sr@denx.de>
* arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directoryStefan Roese2015-07-23-1/+2
| | | | | | | | | With the upcoming addition of the Armada 38x SPL support, which is not compatible to the Armada XP SERDES init code, we need to introduce a new directory infrastructure. So lets move the AXP serdes init code into a new directory. This way the A38x code can be added in a clean way. Signed-off-by: Stefan Roese <sr@denx.de>
* arm: mvebu: Disable MMU before changing register base addressStefan Roese2015-07-23-0/+18
| | | | | | | | Only with disabled MMU its possible to switch the base register address on Armada 38x. Without this the SDRAM located at >= 0x4000.0000 is also not accessible, as its still locked to cache. Signed-off-by: Stefan Roese <sr@denx.de>
* arm: mvebu: spl.c: Add call to board_early_init_f()Stefan Roese2015-07-23-0/+7
| | | | | | | Pin muxing needs to be done before UART output, since on A38x the UART pins need some re-muxing for output to work. Signed-off-by: Stefan Roese <sr@denx.de>
* arm: mvebu: Use default reg base address for SPL on A38xStefan Roese2015-07-23-0/+10
| | | | | | | | | On A38x switching the regs base address without running from SDRAM doesn't seem to work. So let the SPL still use the default base address and switch to the new address in the mail u-boot later. Signed-off-by: Stefan Roese <sr@denx.de>
* arm: mvebu: Call timer_init early before PHY and DDR initStefan Roese2015-07-23-0/+9
| | | | | | | | | | Without calling timer_init(), the xdelay() functions return immediately. We need to call timer_init() early, so that these functions work and the PHY and DDR init code works correctly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anton Schubert <anton.schubert@gmx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: add Armada XP SATA supportAnton Schubert2015-07-23-0/+1
| | | | | | | | | | This patch initializes the SATA address windows on Armada XP and allows it to work with the existing mvsata_ide driver. It also adds the necessary configuration for the db-mv784mp-gp board. Signed-off-by: Anton Schubert <anton.schubert@gmx.de> Tested-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* usb: Add EHCI support for Armada 38x (mvebu)Stefan Roese2015-07-10-0/+1
| | | | | | | | | | | This patch adds USB EHCI host support for the common mvebu platform. Including the Armada 38x. Tested on DB-88F6280-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38xStefan Roese2015-07-10-0/+56
| | | | | | | | | | This patch adds support for the common AHCI controller on the Marvell Armada 38x. Tested on the Marvell DB-88F6820-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Add SDIO/SDHCI support for Armada A38xStefan Roese2015-07-10-0/+24
| | | | | | | | | | | | Armada A38x implements an SDHCI compatible SDIO controller. This patch enables the Marvell driver to support this SoC. And enables the SDIO controller if selected by the board configuration. Tested on Marvell DB-88F6820-GP board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Update CBAR with SOC regs baseKevin Smith2015-06-14-0/+7
| | | | | | | | | SMP-enabled Linux kernels read the CBAR register in CP15 to find the address of the SCU registers. After remapping internal registers, also update the CBAR so the kernel can find them. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Acked-by: Stefan Roese <sr@denx.de>
* arm: mvebu: Disable L2 cache before enabling d-cacheStefan Roese2015-06-14-0/+8
| | | | | | | | L2 cache may still be enabled by the BootROM. We need to first disable it before enabling d-cache support. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com>
* arm: mvebu: Remove "u-boot.kwb" CONFIG_BUILD_TARGET for non-SPL targetsStefan Roese2015-05-05-2/+0
| | | | | | | | | | | | | | | | | | By removing this default build target, the "u-boot.kwb" target is not automatically generated. This fixes a temporary build error when using out-of-tree builds, as buildman does per default (reported by Simon). When the full SPL support is added for these targets with the DDR training code, the "u-boot-spl.kwb" image will be generated automatically. Users providing a special bin_hdr binary (binary.0) file can always add this binary file and generate the full firmware image by issuing the "make u-boot.kwb" command directly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Add d-cache invalidate before enabling the d-cacheStefan Roese2015-05-05-0/+3
| | | | | | | | | | This solves some RX problems that have been seen, when using the mvneta ethernet driver. The cache needs to be reset into a "clean" state before using it. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* arm: mvebu: Remove coherency configurationStefan Roese2015-05-05-3/+0
| | | | | | | | | | We are not using the coherency feature in U-Boot at all. So lets remove this configuration from the mbus driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* arm: mvebu: Change network init code to allow a more flexible setupStefan Roese2015-05-05-4/+16
| | | | | | | | | | | | | | | With the introduction of the Armada 38x support, its necessary to change the mvneta ethernet driver init call from always 4 times to a configurable value. Lets make this init call more flexible by moving the actually used devices to the config header. Additionally this patch takes care of the slightly different base addresses for the ethernet controllers on A38x. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* arm: mvebu: Add basic Armada 38x supportStefan Roese2015-05-05-16/+73
| | | | | | | | | | | | | | | | This patch adds support for the Marvell Armada 38x SoC family. Supported peripherals are: - UART - Ethernet (mvneta) - I2C - SPI (including SPI NOR flash) Tested on Marvell DB-88F6820-GP evaluation board. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* arm: mvebu: Move CONFIG_SPL_LDSCRIPT to common headerStefan Roese2015-05-05-0/+5
| | | | | | | | | This way, new MVEBU boards don't need to specifiy the common location for the SPL linker script. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* arm: mvebu: Only define MV88F78X60 for Armada XPStefan Roese2015-05-05-1/+3
| | | | | | | | | | This define is used by the DDR training code for Armada XP. With the upcoming addition of Armada 38x support, lets only define it for Armada XP in this common header. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* arm: mvebu: Remove unreferenced defineStefan Roese2015-05-05-3/+0
| | | | | | | | MAX_MVNETA_DEVS is not used anywhere in U-Boot. So lets remove it. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* arm: mvebu: Change header macros from ARMADA_XP to MVEBUStefan Roese2015-05-05-10/+10
| | | | | | | | | Since these files will be used for other MVEBU SoC's, lets reflect this in the headers marcos as well. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* arm: mvebu: Move mvebu-common into mach-mvebuStefan Roese2015-05-05-1/+2977
| | | | | | | | | | Now that the mach-mvebu directory exists and is used by Armada XP we can move the mvebu-common files into this directory as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* arm: armada-xp: Move SoC headers to mach-mvebu/include/machStefan Roese2015-05-05-0/+266
| | | | | | | | | | | | | | Move arch/arm/include/asm/arch-armada-xp/* -> arch/arm/mach-mvebu/include/mach/* Additionally the SYS_SOC is renamed from "armada-xp" to "mvebu". With this change all these files can better be shared with other, newer Mavell MVEBU SoC's. Like the upcoming Armada 38x support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* arm: armada-xp: Move SoC sources to mach-mvebuStefan Roese2015-05-05-0/+301
Move arch/arm/cpu/armv7armada-xp/* -> arch/arm/mach-mvebu/* Since this platform will be extended to support other Marvell SoC's as well, lets rename it directly to mvebu. This will be used by the upcoming Armada 38x suport (A38x). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>