summaryrefslogtreecommitdiff
path: root/arch/arm/lib
Commit message (Collapse)AuthorAgeLines
* arm, logbuffer: make it compilecleanHeiko Schocher2011-10-27-1/+0
| | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* fdt: ARM: Add fdtcontroladdr to set device tree address in environmentSimon Glass2011-10-26-0/+3
| | | | | | | | | | This adds support for a new environment variable called 'fdtcontroladdr'. If defined, the hex address is used as the address of the control fdt for U-Boot. Note: I have not changed CONFIG_PRAM section as I already have an outstanding patch on that. Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: ARM: Implement and verify embedded and separate device treeSimon Glass2011-10-26-0/+12
| | | | | | | | | | This locates the device tree either embedded within U-Boot or attached to the end as a separate binary. When CONFIG_OF_CONTROL is defined, U-Boot requires a valid fdt. A check is provided for this early in initialisation. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Correct build error introduced by getenv_ulong() patchSimon Glass2011-10-24-4/+8
| | | | | | | | | | Commit dc8bbea removed a local variable that is used in most ARM boards. Since we want to avoid an 'unused variable' warning with later compilers, and the #ifdef logic of whether this variable is required is bit painful, this declares the variable local to the block of code that needs it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Use getenv_ulong() in place of getenv(), strtoulSimon Glass2011-10-23-25/+11
| | | | | | This changes the board code to use the new getenv_ulong() function. Signed-off-by: Simon Glass <sjg@chromium.org>
* arch/arm/lib/board.c: fix warning: variable ... set but not usedWolfgang Denk2011-10-09-3/+1
| | | | | | | | Fix: board.c:445:8: warning: variable 'bd' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* net: drop !NET_MULTI codeMike Frysinger2011-10-05-2/+0
| | | | | | | | | | | This is long over due. All but two net drivers have been converted, but those have now been dropped. The only thing left to do is actually delete all references to NET_MULTI and code that is compiled when that is not defined. So here we scrub the core code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* POST/arm: adaptations needed for POST on ARM to workValentin Longchamp2011-10-05-0/+2
| | | | | | | | | | | For post to run on ARM, 3 things are needed: - post_log_word to be defined in gd - a post.h include in arch/arm/lib/board.c Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
* led: remove camel casing of led identifiers globallyJason Kridner2011-09-13-16/+16
| | | | | | | | | | | | | | | Result of running the following command to address Wolfgang's comment about camel case: for file in `find . | grep '\.[chS]$'`; do perl -i -pe 's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; done Discussion: http://patchwork.ozlabs.org/patch/84988/ Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* armv7: cache: remove flush on un-aligned invalidateAneesh V2011-09-04-6/+9
| | | | | | | | | | Remove the flush of boundary cache-lines done as part of invalidate on a non cache-line boundary aligned buffer Also, print a warning when this situation is recognized. Signed-off-by: Aneesh V <aneesh@ti.com>
* arm: do not force d-cache enable on all boardsAneesh V2011-09-04-5/+15
| | | | | | | | | | | | c2dd0d45540397704de9b13287417d21049d34c6 added dcache_enable() to board_init_r(). This enables d-cache for all ARM boards. As a result some of the arm boards that are not cache-ready are broken. Revert this change and allow platform code to take the decision on d-cache enabling. Also add some documentation for cache usage in ARM. Signed-off-by: Aneesh V <aneesh@ti.com>
* arm: fix bd pointer dereference prior initializationIgor Grinberg2011-09-03-4/+5
| | | | | | | gd->bd pointer has been used prior been initialized. Move the relevant code after the initialization. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* arm, lib/board.c: use gd->ram_size instead of bd->bi_memsizeHeiko Schocher2011-09-03-1/+1
| | | | | Signed-off-by: Heiko Schocher <hs@denx.de> cc: Albert Aribaud <albert.u.boot@aribaud.net>
* arm: lib: memcpy: Do not copy to same addressMatthias Weisser2011-09-03-0/+3
| | | | | | | | In some cases (e.g. bootm with a elf payload which is already at the right position) there is a in place copy of data to the same address. Catching this saves some ms while booting. Signed-off-by: Matthias Weisser <weisserm@arcor.de>
* cosmetic: arm: lib/board.c: Coding Style cleanupHeiko Schocher2011-08-04-105/+111
| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> cc: Albert Aribaud <albert.u.boot@aribaud.net> cc: <macpaul@gmail.com> cc: Wolfgang Denk <wd@denx.de>
* unify version_stringAndreas Bießmann2011-07-28-8/+0
| | | | | | | | | | | | This patch removes the architecture specific implementation of version_string where possible. Some architectures use a special place and therefore we provide U_BOOT_VERSION_STRING definition and a common weak symbol version_string. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> CC: Mike Frysinger <vapier@gentoo.org> CC: Peter Pan <pppeterpppan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* replace CONFIG_PRELOADER with CONFIG_SPL_BUILDAneesh V2011-07-26-1/+1
| | | | | | replace all occurences of CONFIG_PRELOADER with CONFIG_SPL_BUILD Signed-off-by: Aneesh V <aneesh@ti.com>
* scaled down version of generic libraries for SPLAneesh V2011-07-26-0/+2
| | | | Signed-off-by: Aneesh V <aneesh@ti.com>
* arm: add CONFIG_MACH_TYPE setting and documentationIgor Grinberg2011-07-17-0/+4
| | | | | | | | | CONFIG_MACH_TYPE is used to set the machine type number in the common arm code instead of setting it in the board code. Boards with dynamically discoverable machine types can still set the machine type number in the board code. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* armv7: add PL310 support to u-bootAneesh V2011-07-04-0/+116
| | | | | | | | | | | | | PL310 is the L2$ controller from ARM used in many SoCs including the Cortex-A9 based OMAP4430 Add support for some of the key PL310 operations - Invalidate all - Invalidate range - Flush(clean & invalidate) all - Flush range Signed-off-by: Aneesh V <aneesh@ti.com>
* arm: minor fixes for cache and mmu handlingAneesh V2011-07-04-2/+18
| | | | | | | | | | | 1. make sure that page table setup is not done multiple times 2. flush_dcache_all() is more appropriate while disabling cache than a range flush on the entire memory(flush_cache()) Provide a default implementation for flush_dcache_all() for backward compatibility and to avoid build issues. Signed-off-by: Aneesh V <aneesh@ti.com>
* armv7: integrate cache maintenance supportAneesh V2011-07-04-5/+13
| | | | | | | | | | - Enable I-cache on bootup - Enable MMU and D-cache immediately after relocation - Do necessary initialization before enabling d-cache and MMU - Changes to cleanup_before_linux() - Make changes according to the new framework Signed-off-by: Aneesh V <aneesh@ti.com>
* armv7: rename cache related CONFIG flagsAneesh V2011-07-04-6/+4
| | | | | | | | | | | | | | | | Replace the cache related CONFIG flags with more meaningful names. Following are the changes: CONFIG_L2_OFF -> CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_NO_ICACHE -> CONFIG_SYS_ICACHE_OFF CONFIG_SYS_NO_DCACHE -> CONFIG_SYS_DCACHE_OFF Signed-off-by: Aneesh V <aneesh@ti.com> V2: * Changed CONFIG_L2_OFF -> CONFIG_SYS_NO_L2CACHE V4: * Changed all three flags to the final names suggested as above and accordingly changed the commit message
* arm: make default implementation of cache_flush() weakly linkedAneesh V2011-07-04-1/+3
| | | | | | | make default implementation of cache_flush() weakly linked so that sub-architectures can override it Signed-off-by: Aneesh V <aneesh@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-06-23-3/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: run arm_pci_init after relocation IXP42x PCI rewrite update/fix PDNB3 board update/fix IXDP425 / IXDPG425 boards add dvlhost (dLAN 200 AV Wireless G) board IXP NPE: add support for fixed-speed MII ports update/fix AcTux4 board update/fix AcTux3 board update/fix AcTux2 board update/fix AcTux1 board use -ffunction-sections / --gc-sections on IXP42x support CONFIG_SYS_LDSCRIPT on ARM fix "depend" target in npe directory Fix IXP code to work after relocation was added trigger hardware watchdog in IXP42x serial driver add support for IXP42x Rev. B1 and newer add XScale sub architecture (IXP/PXA) to maintainer list Conflicts: arch/arm/lib/board.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * run arm_pci_init after relocationMichael Schwingen2011-06-23-3/+3
| | | | | | | | Signed-off-by: Michael Schwingen <michael@schwingen.org>
* | ARM: drop unsupported 'trab' boardWolfgang Denk2011-06-22-16/+0
|/ | | | | | | | | | The 'trab' board configuration is broken, and there is nobody who is interested and willing to fix it. Drop it. This includes support for VFD displays which have always been used by this board only. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Minor coding style cleanup.Wolfgang Denk2011-05-19-1/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-04-27-1/+374
|\
| * Don't grab memory for LCD if FB address is definedMinkyu Kang2011-04-27-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | If FB address is defined specific address then don't grab memory for LCD Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com>
| * ARM: fix stack pointer adjustment in board_init_f()Eric Cooper2011-04-27-1/+1
| | | | | | | | | | | | | | | | Since addr_sp is a byte address, it should be adjusted by 12 here. Signed-off-by: Eric Cooper <ecc@cmu.edu> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Wolfgang Denk <wd@denx.de>
| * arm: Use optimized memcpy and memset from linuxMatthias Weisser2011-04-27-0/+369
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using optimized versions of memset and memcpy from linux brings a quite noticeable speed (x2 or better) improvement for these two functions. Here are some numbers for test done with jadecpu | HEAD(1)| HEAD(1)| HEAD(2)| HEAD(2)| | | +patch | | +patch | ---------------------------+--------+--------+--------+--------+ Reset to prompt | 438ms | 330ms | 228ms | 120ms | | | | | | TFTP a 3MB img | 4782ms | 3428ms | 3245ms | 2820ms | | | | | | FATLOAD USB a 3MB img* | 8515ms | 8510ms | ------ | ------ | | | | | | BOOTM LZO img in RAM | 3473ms | 3168ms | 592ms | 592ms | where CRC is | 615ms | 615ms | 54ms | 54ms | uncompress | 2460ms | 2462ms | 450ms | 451ms | final boot_elf | 376ms | 68ms | 65ms | 65ms | | | | | | BOOTM LZO img in FLASH | 3207ms | 2902ms | 1050ms | 1050ms | where CRC is | 600ms | 600ms | 135ms | 135ms | uncompress | 2209ms | 2211ms | 828ms | 828ms | | | | | | Copy 1.4MB from NOR to RAM | 134ms | 72ms | 120ms | 70ms | (1) No dcache (2) dcache enabled in board_init *Does not work when dcache is on Size impact: C version: text data bss dec hex filename 202862 18912 266456 488230 77326 u-boot ASM version: text data bss dec hex filename 203798 18912 266288 488998 77626 u-boot 222712 u-boot.bin Signed-off-by: Matthias Weisser <weisserm@arcor.de>
* | Respect memreserve regions specified in the device treeGrant Likely2011-04-25-0/+2
| | | | | | | | | | | | | | | | If a regions is reserved in the fdt, then it should not be used. Add the memreserve regions to the lmb so that u-boot doesn't use them to store the initrd. Signed-off-by: Grant Likely <grant.likely@linaro.org>
* | Stop passing around bootmem_base value.Grant Likely2011-04-25-2/+1
|/ | | | | | | | | | For the calls to boot_relocate_fdt(), boot_get_cmdline(), and boot_get_kbd(), the value of bootmem_base is always obtained by calling getenv_bootm_low(). Since the value always comes from the same source, the calling signature for those functions can be simplified by making them call getenv_bootm_low() directly. Signed-off-by: Grant Likely <grant.likely@linaro.org>
* arm: fix incorrect monitor protection region in FLASHPo-Yu Chuang2011-03-27-1/+1
| | | | | | | | | | | Monitor protection region in FLASH did not cover .rel.dyn and .dynsym sections, because it uses __bss_start to compute monitor_flash_len. Use _end instead. Add _end to linker scripts for end of u-boot image Add _end_ofs to all the start.S. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
* arm: get_sp() should always be compiledPo-Yu Chuang2011-02-21-3/+1
| | | | | | | | | | | | get_sp() was incorrectly excluded if none of CONFIG_SETUP_MEMORY_TAGS CONFIG_CMDLINE_TAG CONFIG_INITRD_TAG CONFIG_SERIAL_TAG CONFIG_REVISION_TAG were defined. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
* Replace "FLASH" strings with "Flash" or "flash"Peter Tyser2011-01-19-1/+1
| | | | | | | | There's no compelling reason to have the output on bootup or the "flinfo" command print "flash" in uppercase, so use the proper case where appropriate. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* arm: add 8-byte alignment for ABI compliance before board_init_fHeiko Schocher2010-12-08-1/+1
| | | | | | | | | | | | | suggested from Daniel Hobi<daniel.hobi@schmid-telecom.ch> Tested on following boards: arm1136: qong armv7: omap3_beagle arm926ejs: magnesium, tx25 Signed-off-by: Heiko Schocher <hs@denx.de> cc: Daniel Hobi <daniel.hobi@schmid-telecom.ch> cc: Albert ARIBAUD <albert.aribaud@free.fr>
* Switch from archive libraries to partial linkingSebastien Carlier2010-11-17-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
* ARMV7: Fix build for non-OMAP3 boardsSteve Sakoman2010-11-04-1/+1
| | | | | | | | | | | | | | | Commit c3d3a54 uses CONFIG_ARMV7 to determine whether to call the v7_flush_cache_all function. This breaks the build for all non-OMAP3 boards (like Panda and OMAP4430SDP) since there is only a v7_flush_cache_all implementation for OMAP3. This patch uses CONFIG_OMAP3XXX instead of CONFIG_ARMV7 so that only boards with a v7_flush_cache_all will make the call. Tested on Beagle, Overo, Panda, and OMAP4430SDP Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Drop support for CONFIG_SYS_ARM_WITHOUT_RELOCWolfgang Denk2010-10-29-253/+0
| | | | | | | | | | | | | | | | When this define was introduced, the idea was to provide a soft migration path for ARM boards to get adapted to the new relocation support. However, other recent changes led to a different implementation (ELF relocation), where this no longer works. By now CONFIG_SYS_ARM_WITHOUT_RELOC does not only not help any more, but it actually hurts because it obfuscates the actual code by sprinkling it with lots of dead and non-working debris. So let's make a clean cut and drop CONFIG_SYS_ARM_WITHOUT_RELOC. Signed-off-by: Wolfgang Denk <wd@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
* Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOCWolfgang Denk2010-10-29-32/+0
| | | | | | | | | | | By now, the majority of architectures have working relocation support, so the few remaining architectures have become exceptions. To make this more obvious, we make working relocation now the default case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC. Signed-off-by: Wolfgang Denk <wd@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
* arm, bootm: Fix compile warningHeiko Schocher2010-10-26-2/+0
| | | | | | | | | | Fix warning: bootm.c: In function 'bootm_linux_fdt': bootm.c:181: warning: unused variable 's' bootm.c:180: warning: unused variable 'bd' Signed-off-by: Heiko Schocher <hs@denx.de>
* Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated valueWolfgang Denk2010-10-26-1/+1
| | | | | | | | | | | | | | | | | | CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
* ARM: fix relocation support for onenand device.Enric Balletbo i Serra2010-10-23-0/+3
| | | | | | | We also have to relocate the onenand command table manually, otherwise onenand command don't work. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
* Merge branch 'elf_reloc'Wolfgang Denk2010-10-19-4/+6
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/include/asm/config.h board/LaCie/edminiv2/config.mk board/karo/tx25/config.mk board/logicpd/imx27lite/config.mk doc/README.arm-relocation Signed-off-by: Wolfgang Denk <wd@denx.de>
| * armv7, beagle: add support for ELF relocationsHeiko Schocher2010-10-13-1/+1
| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| * arm: implement ELF relocationsAlbert Aribaud2010-10-13-3/+5
| | | | | | | | | | | | | | | | ELF relocation tables generated with linker option -pie can be used to fixup code and data in a single loop at relocation, removing the need for manual fixups anywhere else in the code. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
* | ARM: add flat device tree supportJohn Rigby2010-10-18-16/+121
| | | | | | | | | | | | | | | | | | Based on other architectures already supported. Tested on OMAP3 Beagle board and another unnamed ARM platform. Signed-off-by: John Rigby <john.rigby@linaro.org> Tested-by: Rob Herring <rob.herring@smooth-stone.com> Acked-by: Wolfgang Denk <wd@denx.de>
* | env_mmc: Fix crashing bug encountered after enabling ARM relocationSteve Sakoman2010-10-13-5/+5
| | | | | | | | | | | | | | | | | | | | | | The crash was occuring in env_relocate because it was being called prior to mmc_initialize. This patch moves the MMC initialization earlier in the init process. This patch also cleans up the env_relocate_spec code in env_mmc.c Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org> Acked-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-11-20 16:57:27 +0000