summaryrefslogtreecommitdiff
path: root/arch/arm/lib
Commit message (Collapse)AuthorAgeLines
* arm: spl: Allow board_init_r() to run with a larger stackSimon Glass2015-03-04-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present SPL uses a single stack, either CONFIG_SPL_STACK or CONFIG_SYS_INIT_SP_ADDR. Since some SPL features (such as MMC and environment) require a lot of stack, some boards set CONFIG_SPL_STACK to point into SDRAM. They then set up SDRAM very early, before board_init_f(), so that the larger stack can be used. This is an abuse of lowlevel_init(). That function should only be used for essential start-up code which cannot be delayed. An example of a valid use is when only part of the SPL code is visible/executable, and the SoC must be set up so that board_init_f() can be reached. It should not be used for SDRAM init, console init, etc. Add a CONFIG_SPL_STACK_R option, which allows the stack to be moved to a new address before board_init_r() is called in SPL. The expected SPL flow (for CONFIG_SPL_FRAMEWORK) is documented in the README. Signed-off-by: Simon Glass <sjg@chromium.org> For version 1: Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: spl: Avoid setting up a duplicate global data structureSimon Glass2015-03-04-0/+4
| | | | | | | | | | | | This is already set up in crt0.S. We don't need a new structure and don't really want one in the 'data' section of the image, since it will be empty and crt0.S's changes will be ignored. As an interim measure, remove it only if CONFIG_DM is not defined. This allows us to press ahead with driver model in SPL and allow the stragglers to catch up. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-02-25-1/+1
|\
| * armv8/fsl-lsch3: Convert flushing L3 to assembly to avoid using stackYork Sun2015-02-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Flushing L3 cache in CCN-504 requries d-cache to be disabled. Using assembly function to guarantee stack is not used before flushing is completed. Timeout is needed for simualtor on which CCN-504 is not implemented. Return value can be checked for timeout situation. Change bootm.c to disable dcache instead of simply flushing, required by flushing L3. Signed-off-by: York Sun <yorksun@freescale.com>
* | ARM: remove jadecpu board supportMasahiro Yamada2015-02-24-46/+0
|/ | | | | | | | This is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Matthias Weisser <weisserm@arcor.de> Acked-by: Marek Vasut <marex@denx.de>
* common/board_f: factor out reserve_stacksAndreas Bießmann2015-02-17-0/+43
| | | | | | | | Introduce arch_reserve_stacks() to tailor gd->start_addr_sp and gd->irq_sp to the architecture needs. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-01-26-0/+2
|\
| * arm, arm926ejs: make thumb mode compileableHeiko Schocher2015-01-19-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | in thumb mode compiler says for example for arch/arm/lib/cache-cp15.c when enabling CONFIG_SYS_THUMB_BUILD: {standard input}: Assembler messages: {standard input}:373: Error: selected processor does not support Thumb mode `mrc p15,0,r4,c1,c0,0' {standard input}:416: Error: selected processor does not support Thumb mode `mcr p15,0,r3,c2,c0,0' so, if caches are disabled, do not use this command on arm926ejs. used on at91 in SPL, to reduce size of SPL. Signed-off-by: Heiko Schocher <hs@denx.de>
* | arm: Add warnings about using gdataSimon Glass2015-01-16-1/+6
|/ | | | | | | | | We need to get rid of this SPL-specific setting of the global_data pointer. It is already set up in start.S immediately before board_init_f() is called, and there may be information there that is needed (e.g. pre-reloc malloc info). Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: build arch memset/memcpy in Thumb2 modeStefan Agner2015-01-09-81/+111
| | | | | | | | | | | | | | | | | | | | | | Resynchronize memcpy/memset with kernel 3.17 and build them in Thumb2 mode (unified syntax). Those assembler files can be built and linked in ARM mode too, however when calling them from Thumb2 built code, the stack got corrupted and the copy did not succeed (the exact details have not been traced back). However, the Linux kernel builds those files in Thumb2 mode. Hence U-Boot should build them in Thumb2 mode too when CONFIG_SYS_THUMB_BUILD is set. To build the files without warning, some assembler instructions had to be replaced with their UAL compliant variant (thanks Jeroen for this input). To build the file in Thumb2 mode the implicit-it=always option need to be set to generate Thumb2 compliant IT instructions where needed. We add this option to the general AFLAGS when building for Thumb2. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Agner <stefan@agner.ch>
* ARM: bootm: do not add PSCI to fdt when booting in secure mode.Ian Campbell2015-01-05-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8bc347e2ec17 "ARM: bootm: Allow booting in secure mode on hyp capable systems" added the capability to select nonsec vs sec mode boot via an environment var. There is a subtle gotcha with this functionality, which is that the PSCI nodes are still created in the fdt (via armv7_update_dt->fdt_psci) even when booting in secure mode. Which means that if the kernel is PSCI aware then it will fail to boot because it will try and do PSCI from secure world, which won't work. This likely didn't get noticed before because the original purpose was to support booting the legacy linux-sunxi kernels which don't understand PSCI. To fix expose boot_nonsec (renaming with armv7_ prefix) outside of bootm.c and use from the virt-dt code. As well as avoiding the creation of the PSCI nodes we should also avoid reserving the secure RAM, so do so. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-01-01-0/+44
|\
| * ARM: Implement non-cached memory supportThierry Reding2014-12-18-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement an API that can be used by drivers to allocate memory from a pool that is mapped uncached. This is useful if drivers would otherwise need to do extensive cache maintenance (or explicitly maintaining the cache isn't safe). The API is protected using the new CONFIG_SYS_NONCACHED_MEMORY setting. Boards can set this to the size to be used for the non-cached area. The area will typically be right below the malloc() area, but architectures should take care of aligning the beginning and end of the area to honor any mapping restrictions. Architectures must also ensure that mappings established for this area do not overlap with the malloc() area (which should remain cached for improved performance). While the API is currently only implemented for ARM v7, it should be generic enough to allow other architectures to implement it as well. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | arm: semihosting: get rid of forward declarationsLinus Walleij2014-12-29-89/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | By rearranging the functions in the semihosting code we can avoid forward-declaration of the internal static functions. This puts the stuff in a logical order: read/open/close/len and then higher-order functions follow at the end. Cc: Darwin Rambo <drambo@broadcom.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Mark Hambleton <mark.hambleton@arm.com> Cc: Tom Rini <trini@ti.com> Acked-by: Steve Rae <srae@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | arm: semihosting: fix up compile bugsLinus Walleij2014-12-29-49/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is currently a regression when using newer ARM64 compilers for semihosting: the way long types are inferred from context is no longer the same. The semihosting runtime uses long and size_t, so use this explicitly in the semihosting code and interface, and voila: the code now works again. Tested with aarch64-linux-gnu-gcc: Linaro GCC 4.9-2014.09. Cc: Darwin Rambo <drambo@broadcom.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Mark Hambleton <mark.hambleton@arm.com> Cc: Tom Rini <trini@ti.com> Acked-by: Steve Rae <srae@broadcom.com> Suggested-by: Mark Hambleton <mark.hambleton@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | arm: semihosting: staticize internal functionsLinus Walleij2014-12-29-4/+9
|/ | | | | | | | | | | | | | | | | | | | | | | | | The semihosting code exposes internal file handle handling functions to read(), open(), close() and get the length of a certain file handle. However the code using it is only interested in either reading and entire named file into memory or getting the file length of a file referred by name. No file handles are used. Thus make the file handle code internal to this file by removing these functions from the semihosting header file and staticize them. This gives us some freedom to rearrange the semihosting code without affecting the external interface. Cc: Darwin Rambo <drambo@broadcom.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Mark Hambleton <mark.hambleton@arm.com> Cc: Tom Rini <trini@ti.com> Acked-by: Steve Rae <srae@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-11-24-5/+26
|\
| * ARM: bootm: Allow booting in secure mode on hyp capable systemsHans de Goede2014-11-24-5/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Older Linux kernels will not properly boot in hyp mode, add support for a bootm_boot_mode environment variable, which can be set to "sec" or "nonsec" to force booting in secure or non-secure mode when build with non-sec support. The default behavior can be selected through CONFIG_ARMV7_BOOT_SEC_DEFAULT, when this is set booting in secure mode is the default. The default setting for this Kconfig option is N, preserving the current behavior of booting in non-secure mode by default when non-secure mode is supported. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-11-24-30/+48
|\ \
| * | imx: fix exception vectors relocation in imx27Albert ARIBAUD2014-11-20-28/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3ff46cc4 fixed exception vectors setting in the general ARM case, by either copying the exception and indirect vector tables to normal (0x00000000) or high (0xFFFF0000) vectors address, or setting VBAR to U-Boot's base if applicable. i.MX27 SoC is ARM926E-JS, thus has only normal and high options, but does not provide RAM at 0xFFFF0000 and has only ROM at 0x00000000; it is therefore not possible to move or change its exception vectors. Besides, i.MX27 ROM code does provide an indirect vectors table but at a non-standard address and with the reset and reserved vectors missing. Turn the current vector relocation code into a weak routine called after relocate_code from crt0, and add strong version for i.MX27. Series-Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Stefano Babic <sbabic@denx.de> Tested-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Philippe Reynes <tremyfr@yahoo.fr>
| * | cosmetic: arm: fix whitespace in arch/arm/lib/relocate.SAlbert ARIBAUD2014-11-20-4/+4
| |/ | | | | | | Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | Merge git://git.denx.de/u-boot-dmTom Rini2014-11-24-1/+1
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: drivers/serial/serial-uclass.c Signed-off-by: Tom Rini <trini@ti.com>
| * | dm: arm: spl: Allow simple malloc() in SPLSimon Glass2014-11-21-1/+1
| |/ | | | | | | | | | | | | | | For SPL it is sometimes useful to have a simple malloc() just to permit driver model to work, in the cases where the full malloc() is not made available by the board config. Signed-off-by: Simon Glass <sjg@chromium.org>
* | ARM: remove CONFIG_ARM1136 definesMasahiro Yamada2014-11-20-2/+2
| | | | | | | | | | | | | | | | | | | | CONFIG_CPU_ARM1136 was introduced into Kconfig by commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs). This commit removes all the defines of CONFIG_ARM1136 and replaces the only reference in arch/arm/lib/cache.c with CONFIG_CPU_ARM1136. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: remove CONFIG_ARM926EJS definesMasahiro Yamada2014-11-20-2/+2
|/ | | | | | | | | | CONFIG_CPU_ARM926EJS was introduced into Kconfig by commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs). This commit removes all the defines of CONFIG_ARM926EJS and replaces the only reference in arch/arm/lib/cache.c with CONFIG_CPU_ARM926EJS. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: cache-cp15: Use more accurate typesThierry Reding2014-11-12-3/+3
| | | | | | | | | | | | size_t is the canonical type to represent variables that contain a size. Use it instead of signed integer. Physical addresses can be larger than 32-bit, so use a more appropriate type for them as well. phys_addr_t is a type that is 32-bit on systems that use 32-bit addresses and 64-bit if the system is 64-bit or uses a form of physical address extension to use a larger address space on 32-bit systems. Using these types the same API can be implemented on a wider range of systems. Signed-off-by: Thierry Reding <treding@nvidia.com>
* Revert "lib: bootm: add missing include"Michal Simek2014-11-11-1/+0
| | | | | | | | | | | | | | | | | This is a MIME GnuPG-signed message. If you see this text, it means that your E-mail or Usenet software does not support MIME signed messages. The Internet standard for MIME PGP messages, RFC 2015, was published in 1996. To open this message correctly you will need to install E-mail or Usenet software that supports modern Internet standards. This reverts commit 1e96220a5687efae2aed45ce56e143336c40d0a7. Remove duplicated vxworks.h header. The same change was done by "ARM: prevent compiler warnings from bootm.c" (sha1: 8d196e52b58d1e50a80c2f5067b201cda521c75c) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-11-10-0/+138
|\
| * arm: debug: adjust for U-BootMasahiro Yamada2014-10-26-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Because CONFIG_MMU is never defined in U-Boot, the non-MMU code in debug.S is always used. Unfortunately, the number of arguments of the addruart macro in Linux is different between MMU and non-MMU. This causes a build error when importing some debug macros using the third argument. (For ex. arch/arm/include/debug/exynos.S) Pass the third argument to the non-MMU addruart to avoid such a problem. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com>
| * arm: debug: add Kconfig entries for lowlevel debugMasahiro Yamada2014-10-26-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have not had a good method to debug the early boot stage such as lowlevel_init function. I guess developers generally use dedicated debuggers for that, but it is difficult in some cases. (For example, my debugger cannot connect to the ARM processor when it is in the secure state. It sometimes happens when I need to debug the early boot stage on ARM SoCs with secure extension.) The low level debug feature in Linux would be also helpful for U-boot when we are stucking in nasty problems where the console is not available yet. You have to enable CONFIG_DEBUG_LL to use this feature. For now, only 8250-compatible UART devices are supported. You can add a header file under arch/arm/include/debug/ directory to support your UART device if necessary. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * arm: debug: replace license blocks with SPDXMasahiro Yamada2014-10-26-3/+1
| | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * arm: debug: import debug files from Linux 3.16Masahiro Yamada2014-10-26-0/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot does not have arch/arm/kernel, include/uapi directories, This commit copies files as follows: Location in Linux -> Location in U-Boot arch/arm/kernel/debug.S -> arch/arm/lib/debug.S arch/arm/include/debug/8250.S -> arch/arm/include/debug/8250.S include/uapi/linux/serial_reg.h -> include/linux/serial_reg.h Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | arm: interrupt_init: set sp in IRQ/FIQ modesGeorges Savoundararadj2014-10-29-0/+27
| | | | | | | | | | | | | | | | | | | | | | Before this commit, the stack addresses for IRQ and FIQ modes, IRQ_STACK_START and FIQ_STACK_START, were computed in interrupt_init but they were not used. This commit sets the stack pointers for IRQ and FIQ modes. Signed-off-by: Georges Savoundararadj <savoundg@gmail.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | arm: relocate the exception vectorsGeorges Savoundararadj2014-10-29-0/+30
| | | | | | | | | | | | | | | | | | | | | | This commit relocates the exception vectors. As ARM1176 and ARMv7 have the security extensions, it uses VBAR. For the other ARM processors, it copies the relocated exception vectors to the correct address: 0x00000000 or 0xFFFF0000. Signed-off-by: Georges Savoundararadj <savoundg@gmail.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Warren <twarren@nvidia.com>
* | arm: make .vectors section allocatableGeorges Savoundararadj2014-10-29-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A regression was introduced in commit 41623c91. The consequence of that is the non-relocation of the section .vectors symbols : _undefined_instruction, _software_interrupt, _prefetch_abort, _data_abort, _not_used, _irq and _fiq. Before commit 41623c91, the exception vectors were in a .text section. The .text section has the attributes allocatable and executable [1]. In commit 41623c91, a specific section is created, called .vectors, with the attribute executable only. What have changed between commit 41623c91^ and 41623c91 is the attribute of the section which contains the exception vectors. An allocatable section is "a section [that] occupies memory during process execution" [1] which is the case of the section .vectors. Adding the lacking attribute (SHF_ALLOC or "a") for the definition of the section .vectors fixed the issue. To summarize, the fix has to mark .vectors as allocatable because the exception vectors reside in "memory during execution" and they need to be relocated. [1] http://man7.org/linux/man-pages/man5/elf.5.html Signed-off-by: Georges Savoundararadj <savoundg@gmail.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini2014-10-27-1/+4
|\ \
| * | ARM: prevent compiler warnings from bootm.cEric Nelson2014-10-21-1/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Without preceding declarations, "make C=1" generates "Should it be static?" warnings for symbols do_bootm_linux, boot_prep_vxworks, and boot_jump_vxworks Include of bootm.h also identified a signature mismatch (const on argv[]). Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | arm: vectors: provide protypes from vectors.SJeroen Hofstee2014-10-25-0/+1
| | | | | | | | | | Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | lib: bootm: add missing includeJeroen Hofstee2014-10-25-0/+1
| | | | | | | | | | | | | | since the vxworks weaks are reimplement make sure their prototypes are visible. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* | leds: missing includeJeroen Hofstee2014-10-25-0/+1
| | | | | | | | Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* | arm: board: use __weakJeroen Hofstee2014-10-24-28/+12
|/ | | | | Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* arm: cache: Add support for write-allocate D-CacheMarek Vasut2014-10-06-0/+2
| | | | | | | | | | | | | | Add configuration for the write-allocate mode of L1 D-Cache on ARM. This is needed for D-Cache operation on Cortex-A9 on the SoCFPGA . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
* armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot PageYork Sun2014-09-25-7/+3
| | | | | | | | | | Secondary cores need to be released from holdoff by boot release registers. With GPP bootrom, they can boot from main memory directly. Individual spin table is used for each core. Spin table and the boot page is reserved in device tree so OS won't overwrite. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Arnab Basu <arnab.basu@freescale.com>
* Revert "ARM: SPL: do not set gd again"Tom Rini2014-09-16-0/+3
| | | | | | | | | | | | | | At the high level, the problem is that we set gd multiple times (and still do, even after the commit we're reverting). We set important parts of gd to the copy which is not above stack but rather in the data section. For the release, we're going to revert this change and for the next release we shall correct things to only, really, set gd once to an appropriate location and ensure that comments about it are correct too. This reverts commit f0c3a6c4ad09210d5d4aeafe87685ee75e5683d6. Acked-by: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Tom Rini <trini@ti.com>
* arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFGBenoît Thébaudeau2014-09-11-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The boards using CONFIG_SYS_DV_NOR_BOOT_CFG (i.e. calimain, da850evm_direct_nor and enbw_cmc) had the _start symbol defined after the CONFIG_SYS_DV_NOR_BOOT_CFG word rather than before it in arch/arm/lib/vectors.S. Because of that, if by lack of luck 'gd->mon_len = (ulong)&__bss_end - (ulong)_start' (see setup_mon_len()) was a multiple of 4 kiB (see reserve_uboot()), then the last BSS word overlapped the first word of the following reserved RAM area (or went beyond the top of RAM without such an area) after relocation because __image_copy_start did not match _start (see relocate_code()). This was broken by commit 41623c9 'arm: move exception handling out of start.S files', which defined _start twice (before and after the CONFIG_SYS_DV_NOR_BOOT_CFG word), then by commit 0a26e1d 'arm: fix a double-definition error of _start symbol', which kept the definition of the _start symbol after the CONFIG_SYS_DV_NOR_BOOT_CFG word. This new commit fixes this issue by restoring the original behavior, i.e. by defining the _start symbol before the CONFIG_SYS_DV_NOR_BOOT_CFG word. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Manfred Rudigier <manfred.rudigier@omicron.at> Cc: Christian Riesch <christian.riesch@omicron.at> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Heiko Schocher <hs@denx.de>
* arm: Make reset position-independentBenoît Thébaudeau2014-09-11-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Some boards, like mx31pdk and tx25, require the beginning of the SPL code to be position-independent. For these two boards, this is because they use the i.MX external NAND boot, which starts by executing the first NAND Flash page from the NFC page buffer. The SPL then needs to copy itself to its actual link address in order to free the NFC page buffer and use it to load the non-SPL image from Flash before running it. This means that the SPL runtime address differs from its link address between the reset and the initial copy performed by board_init_f(), so this part of the SPL binary must be position-independent. This requirement was broken by commit 41623c9 'arm: move exception handling out of start.S files', which used an absolute address to branch to the reset routine. This new commit restores the original behavior, which just performed a relative branch. This fixes the boot of mx31pdk and tx25. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Reported-by: Helmut Raiger <helmut.raiger@hale.at> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Magnus Lilja <lilja.magnus@gmail.com> Cc: John Rigby <jcrigby@gmail.com> Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
* eabi_compat: add __aeabi_memcpy __aeabi_memsetJeroen Hofstee2014-09-09-2/+13
| | | | | cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* ARM: SPL: do not set gd againJeroen Hofstee2014-09-09-3/+0
| | | | | | | | | Just before calling board_init_f, crt0.S has already reserved space for the initial gd on the stack. There should be no need to allocate it again. cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* arm:reset: call the reset_misc() before the cpu resetPrzemyslaw Marczak2014-09-05-0/+6
| | | | | | | | | | | | | | | | | | | | On an Odroid U3 board, the SOC is unable to reset the eMMC card in the DWMMC mode by the cpu software reset. Manual reset of the card by switching proper gpio pin - fixes this issue. Such solution needs to add a call to pre reset function. This is done by the reset_misc() function, which is called before reset_cpu(). The function reset_misc() is a weak function. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Changes v4: - arch/arm/reset: fix weak function attribute to proper style Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* arm64: Correct passing of Linux kernel argsTom Rini2014-08-30-3/+5
| | | | | | | The Documentation/arm64/booting.txt document says that pass in x1/x2/x3 as 0 as they are reserved for future use. Signed-off-by: Tom Rini <trini@ti.com>
generated by cgit v1.1 at 2024-11-20 03:56:52 +0000