summaryrefslogtreecommitdiff
path: root/arch/arm/include
Commit message (Collapse)AuthorAgeLines
* armv8: enable compilation with CONFIG_SYS_NONCACHED_MEMORYStephen Warren2015-11-10-5/+6
| | | | | | | | | | | | | | | | The implementation of noncached_init() uses define MMU_SECTION_SIZE. Define this on ARM64. Move the prototype of noncached_{init,alloc}() to a location that doesn't depend on !defined(CONFIG_ARM64). Note that noncached_init() calls mmu_set_region_dcache_behaviour() which relies on something having set up translation tables with 2MB block size. The core ARMv8 MMU setup code does not do this by default, but currently relies on SoC specific MMU setup code. Be aware of this before enabling this feature on your platform! Signed-off-by: Stephen Warren <swarren@nvidia.com>
* arm: stm32f4: fix a bug when a random sector gets erasedVadzim Dambrouski2015-11-10-0/+1
| | | | | | | | | | Old sector number is not being cleared from FLASH_CR register. For example when first erased sector was 001 and then you want to erase sector 010, sector 011 gets erased instead. This patch clears old sector number from FLASH_CR register before a new one is written. Signed-off-by: Vadzim Dambrouski <pftbest@gmail.com>
* arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILDAlbert ARIBAUD2015-11-10-0/+4
| | | | | | | | | | | | When building a Thumb-1-only target with CONFIG_SYS_THUMB_BUILD, some files fail to build, most of the time because they include mcr instructions, which only exist for Thumb-2. This patch introduces a Kconfig option CONFIG_THUMB2 and uses it to select between Thumb-2 and ARM mode for the aforementioned files. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* ARM64: zynqmp: Sync zynq_sdhci_init() declarationMichal Simek2015-11-07-1/+1
| | | | | | | | | | | | | | | This patch fix compilation error: drivers/mmc/zynq_sdhci.c:16:5: error: conflicting types for ‘zynq_sdhci_init’ int zynq_sdhci_init(phys_addr_t regbase) ^ In file included from drivers/mmc/zynq_sdhci.c:14:0: ./arch/arm/include/asm/arch/sys_proto.h:16:5: note: previous declaration of ‘zynq_sdhci_init’ was here int zynq_sdhci_init(unsigned long regbase); ^ Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM: Use the generic bitops headersFabio Estevam2015-11-05-0/+5
| | | | | | | | | | The generic bitops headers are required when calling logarithmic functions, such as ilog2(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
* arm: ls1021a: Add sata support on qds and twr boardtang yuantian2015-10-29-0/+50
| | | | | | | | | | Freescale ARM-based Layerscape LS102xA contain a SATA controller which comply with the serial ATA 3.0 specification and the AHCI 1.3 specification. This patch adds SATA feature on ls1021aqds and ls1021atwr boards. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/fsl_lsch2: Add fsl_lsch2 SoCMingkai Hu2015-10-29-0/+922
| | | | | | | | | | | Freescale LayerScape with Chassis Generation 2 is a set of SoCs with ARMv8 cores and 2rd generation of Chassis. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/fsl_lsch3: Change arch to fsl-layerscapeMingkai Hu2015-10-29-240/+511
| | | | | | | | | | | | | There are two LS series processors are built on ARMv8 Layersacpe architecture currently, LS2085A and LS1043A. They are based on ARMv8 core although use different chassis, so create fsl-layerscape to refactor the common code for the LS series processors which also paves the way for adding LS1043A platform. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv7/ls1021a: move ns_access to common fileMingkai Hu2015-10-29-21/+82
| | | | | | | | | | Config Security Level Register is different between different SoCs, so put the CSL register definition into the arch specific directory. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* arm: ls102xa: enable snooping for CAAM transactionshoria.geanta@freescale.com2015-10-29-0/+1
| | | | | | | | | | | Enable snooping for CAAM read & write transactions by programming the SCFG snoop configuration register: SCFG_SNPCNFGCR[SECRDSNP] SCFG_SNPCNFGCR[SECWRSNP] Signed-off-by: Horia Geantă <horia.geanta@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Data types defined for 64 bit physical addressAneesh Bansal2015-10-29-5/+9
| | | | | | | | Data types and I/O functions have been defined for 64 bit physical addresses in arm. Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* arm, powerpc: select SYS_GENERIC_BOARDMasahiro Yamada2015-10-24-1/+0
| | | | | | | | | | | We have finished Generic Board conversion for ARM and PowerPC, i.e. all the boards have been converted except OpenRISC, SuperH, SPARC, which have not supported Generic Board framework yet. Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro defines in include/configs/*.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* omap_hsmmc: update struct hsmmc to accomodate base address from DTMugunthan V N2015-10-22-0/+3
| | | | | | | | | | Existing driver gets the actual omap hammc base address + 0x100 bytes as the first 0x100 bytes is not used by the driver. But with DM conversion the base address from DT is different, to accommodate the offset adding res0[0x100] to struct hsmmc. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* driver: net: keystone_net: add support for rgmii phyVitaly Andrianov2015-10-22-0/+5
| | | | | | | | | In K2G, Ethernet doesn't support SGMII instead it support RGMII, adding support to the driver to connect to RGMII phy. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* driver: net: keystone_net: fix phy mode configurationMugunthan V N2015-10-22-0/+2
| | | | | | | | | | Phy mode is a board property and it can be different between multiple board and ports, so it should not be hardcoded in driver to one specific mode. So adding a field in eth_priv_t structure to pass phy mode to driver. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: Add clock informationVitaly Andrianov2015-10-22-0/+4
| | | | | | | | Add clock information for Galileo Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* omap-common: Common get_board_serial function to pass serial through ATAGPaul Kocialkowski2015-10-22-0/+1
| | | | | | | | | Since there is a common function to grab the serial number from the die id bits, it makes sense have one to parse that serial number and feed it to the serial ATAG. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap-common: Common function to display die id, replacing omap3-specific versionPaul Kocialkowski2015-10-22-1/+1
| | | | | | | | | This introduces omap_die_id_display to display the full die id. There is no need to store it in an environment variable, that no boot script is using anyway. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap-common: Common serial and usbethaddr functions based on die idPaul Kocialkowski2015-10-22-2/+3
| | | | | | | | | Now that we have a common prototype to grab the omap die id, functions to figure out a serial number and usb ethernet address can use it directly. Those also get an omap_die_id prefix for better consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap4: omap_die_id supportPaul Kocialkowski2015-10-22-4/+0
| | | | | | | | This introduces omap4 support for omap_die_id, which matches the common omap_die_id definition. It replaces board-specific code to grab the die id bits. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap3: omap_die_id supportPaul Kocialkowski2015-10-22-1/+0
| | | | | | | | This replaces the previous get_dieid definition with omap_die_id, that matches the common omap_die_id definition. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap-common: Common omap_die_id definitionPaul Kocialkowski2015-10-22-0/+2
| | | | | | | | This introduces a common definition for omap_die_id, that aims at providing a common interface for accessing omap platform's die id bits. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-10-16-0/+2
|\
| * arm: socfpga: enable data/inst prefetch and shared override in the L2Dinh Nguyen2015-10-17-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the L2 AUX CTRL settings for the SoCFPGA. Enabling D and I prefetch bits helps improve SDRAM performance on the platform. Also, we need to enable bit 22 of the L2. By not having bit 22 set in the PL310 Auxiliary Control register (shared attribute override enable) has the side effect of transforming Normal Shared Non-cacheable reads into Cacheable no-allocate reads. Coherent DMA buffers in Linux always have a Cacheable alias via the kernel linear mapping and the processor can speculatively load cache lines into the PL310 controller. With bit 22 cleared, Non-cacheable reads would unexpectedly hit such cache lines leading to buffer corruption. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | arm: mmu: Add missing volatile for reading SCTLR registerAlison Wang2015-10-16-1/+1
|/ | | | | | | | | | | | | Add 'volatile' qualifier to the asm statement in get_cr() so that the statement is not optimized out by the compiler. (http://comments.gmane.org/gmane.linux.linaro.toolchain/5163) Without the 'volatile', get_cr() returns a wrong value which prevents enabling the MMU and later causes a PCIE VA access failure. Signed-off-by: Alison Wang <alison.wang@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2015-10-15-2/+6
|\
| * armv8/mmu: Set bits marked RES1 in TCRThierry Reding2015-10-15-0/+4
| | | | | | | | | | | | | | | | | | | | | | For EL3 and EL2, the documentation says that bits 31 and 23 are reserved but should be written as 1. For EL1, only bit 23 is not reserved, so only write bit 31 as 1. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * armv8/mmu: Clean up TCR programmingThierry Reding2015-10-15-2/+2
| | | | | | | | | | | | | | | | | | Use the inner shareable attribute for memory, which makes more sense considering that this code is called when caches are being enabled. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* | pci: pcie_imx: Fix hang on mx6qpFabio Estevam2015-10-15-0/+2
|/ | | | | | | | | | | PCI driver currently hangs on mx6qp. Toggle the reset bit with the appropriate timings to fix the issue. Based on the FSL kernel driver implementation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* lpc32xx: remove surplus clock cycle in PL175 WAIT_OEN configVladimir Zapolskiy2015-10-11-1/+1
| | | | | | | | | | | | | | According to ARM PrimeCell PL175 documentation WAIT_OEN config value is defined without any additional clocks added to the value set by a client, the change fixes the wrong interface to WAIT_OEN config. The change also touches a single user of LPC32xx EMC and corrects configured "output enable delay" value on its side according to the changed interface. No functional change intended. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-10-02-18/+28
|\
| * vf610: refactor DDRMC codeAlbert ARIBAUD \\(3ADEV\\)2015-10-02-18/+28
| | | | | | | | | | | | | | | | The VF610 DDRMC driver code contains settings which are board-specific. Move these out to boards so that new boards can define their own without having to modify the driver. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | sunxi: retrieve FEL-provided values to environment variablesBernhard Nortmann2015-09-29-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends the misc_init_r() function on sunxi boards to test for the presence of a suitable "sunxi" SPL header. If found, and the loader ("fel" utility) provided a non-zero value for the boot.scr address, then the corresponding environment variable fel_scriptaddr gets set. misc_init_r() also sets (or clears) the "fel_booted" variable depending on the active boot device, using the same logic as spl_boot_device(). The goal is to provide sufficient information (within the U-Boot environment) to make intelligent decisions on how to continue the boot process, allowing specific customizations for the "FEL boot" case. Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variantBernhard Nortmann2015-09-29-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch follows up on a discussion of ways to improve support for the sunxi FEL ("USB boot") mechanism, especially with regard to boot scripts, see: https://groups.google.com/d/msg/linux-sunxi/wBEGUoLNRro/rHGq6nSYCQAJ The idea is to convert the (currently unused) "pad" bytes in the SPL header into an area where data can be passed to U-Boot. To do this safely, we have to make sure that we're actually using our "sunxi" flavor of the SPL, and not the Allwinner boot0. The modified mksunxiboot introduces a special signature to the SPL header in place of the "pub_head_size" field. This can be used to reliably distinguish between compatible versions of sunxi SPL and anything else (older variants or Allwinner's boot0). Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: move SPL-related definitions to platform-specific includeBernhard Nortmann2015-09-29-12/+20
|/ | | | | | | | | | | | | The sunxi platform currently doesn't seem to make any use of the asm/arch-sunxi/spl.h file. This patch moves some declarations from tools/mksunxiboot.c into it. This enables us to reuse those definitions when extending the sunxi board code (boards/sunxi/boards.c). Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* arm: Drop old non-generic-board codeSimon Glass2015-09-28-19/+0
| | | | | | | This code is no-longer used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andreas Bießmann <andreas.devel@gmail.com>
* ARM: hi6220: Add UART0 and UART3 base addressesPeter Griffin2015-09-28-0/+3
| | | | | Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARM: tegra114: Clear IDDQ when enabling PLLCThierry Reding2015-09-16-0/+3
| | | | | | | | | | | | Enabling a PLL while IDDQ is high. The Linux kernel checks for this condition and warns about it verbosely, so while this seems to work fine, fix it up according to the programming guidelines provided in the Tegra K1 TRM (v02p), Section 5.3.8.1 ("PLLC and PLLC4 Startup Sequence"). The Tegra114 TRM doesn't contain this information, but the programming of PLLC is the same on Tegra114 and Tegra124. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra124: Clear IDDQ when enabling PLLCThierry Reding2015-09-16-0/+3
| | | | | | | | | | | | Enabling a PLL while IDDQ is high. The Linux kernel checks for this condition and warns about it verbosely, so while this seems to work fine, fix it up according to the programming guidelines provided in the Tegra K1 TRM (v02p), Section 5.3.8.1 ("PLLC and PLLC4 Startup Sequence"). Reported-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Implement clk_mThierry Reding2015-09-16-2/+10
| | | | | | | | | | On currently supported SoCs, clk_m always runs at the same frequency as the oscillator input. However newer SoC generations such as Tegra210 no longer have that restriction. Prepare for that by separating clk_m from the oscillator clock and allow SoC code to override the clk_m rate. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Remove tegra_spl_gpio_direction_output declaration from header fileAxel Lin2015-09-16-9/+0
| | | | | | | | | This function is deleted by commit 2fccd2d96bad "tegra: Convert tegra GPIO driver to use driver model". Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* arm: Remove unused ST-Ericsson u8500 archStefan Roese2015-09-15-697/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This arch does not seem to be supported / used at all in the current U-Boot mainline source tree any more. So lets remove the core u8500 code and code that was only referenced by this platform. Please note that this patch also removes these config options: - CONFIG_PL011_SERIAL_RLCR - CONFIG_PL011_SERIAL_FLUSH_ON_INIT As they only seem to be referenced by u8500 based boards. Without any such board in the current code, these config option don't make sense any more. Lets remove them as well. If someone still wants to use this platform, then please send patches to re-enable support by adding at least one board that references this code. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: John Rigby <john.rigby@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heiko Schocher <hs@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2015-09-13-0/+3
|\
| * arch: rmobile: add SCIFA port base offsetsVladimir Barinov2015-08-31-0/+3
| | | | | | | | | | | | | | add SCIFA port base offsets Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | imx: mx7dsabresd: Add support for MX7D SABRESD boardAdrian Alonso2015-09-13-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | * Add i.MX7D SABRESD target board support with enabled modules: UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX. Build target: mx7dsabresd_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* | arm: imx-common: init: rework wdog settings for imx6/imx7Adrian Alonso2015-09-13-0/+1
| | | | | | | | | | | | Rework imx_set_wdog_powerdown to be reused by imx6 and imx7 Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* | imx: imx7d: Add SoC system supportAdrian Alonso2015-09-13-0/+23
| | | | | | | | | | | | | | | | | | Add imx7d basic SoC system support Misc arch dependent functions for system bring up Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* | imx: imx7d: clock control module supportAdrian Alonso2015-09-13-0/+464
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add Clock control module (CCM) support * iMX7D SoC introduces 3 main clock sysmtem abstraction for clock root frequency generation denominated clock slices. Core clock slice: hihg speed clock for ARM core Bus clock slice: for bus clocks IP clock slice: Peripheral clocks * At system boot ROM enables PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET In u-boot, we have to: - Configure PFD3- PFD7 for freq we needed in u-boot - Set clock root for peripherals (ip channel) Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* | imx: imx7d: initial arch level supportAdrian Alonso2015-09-13-0/+4127
| | | | | | | | | | | | | | | | | | | | | | * Add system arch level header files - imx-regs.h: iMX7D SoC system architecture registers - crm_regs.h: Clock control module registers - sys_proto.h: helper callback function for SoC setup Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* | imx: system counter driver for imx7d and mx6ulAdrian Alonso2015-09-13-0/+29
| | | | | | | | | | | | | | | | | | | | Add system counter driver for imx7d and mx6ul imx7 and imx6ul supports system counter timer as well as GPT timer (arch/arm/imx-common/timer.c); The default for imx7 is systemcounter timer. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Adrian Alonso <aalonso@freescale.com>
generated by cgit v1.1 at 2024-12-29 07:48:00 +0000