summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm
Commit message (Collapse)AuthorAgeLines
* arm: add Cygnus and NSP boardsScott Branden2014-08-30-0/+67
| | | | | | | | | The bcm_ep board configuration is used by a number of boards including Cygnus and NSP. Add builds for the bcm958300k and the bcm958622hr boards. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
* arm: iproc: Initial commit of iproc architecture codeScott Branden2014-08-30-0/+98
| | | | | | | | The iproc architecture code is present in several Broadcom chip architectures, including Cygnus and NSP. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
* arm: vf610: add NFC clock supportStefan Agner2014-08-30-0/+15
| | | | | | | Add NFC (NAND Flash Controller) clock support and enable them at board initialization time. Signed-off-by: Stefan Agner <stefan@agner.ch>
* arm: vf610: add NFC pin muxStefan Agner2014-08-30-0/+38
| | | | | | | | Add pin mux for NAND Flash Controller (NFC). NAND can be connected using 8 or 16 data lines, this patch adds pin mux entries for all 16 data lines. Signed-off-by: Stefan Agner <stefan@agner.ch>
* arm: bcm281xx: Add Ethernet Clock supportJiandong Zheng2014-08-30-0/+3
| | | | | | | | Enable Ethernet clock when Broadcom StarFighter2 Ethernet block (CONFIG_BCM_SF2_ETH) is enabled. Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
* socfpga: initialize designware ethernetPavel Machek2014-08-30-0/+2
| | | | | | | | Enable initialization fo designware ethernet controller. With this patch, ethernet works in my configuration, provided I set ethernet address in the environment. Signed-off-by: Pavel Machek <pavel@denx.de>
* socfpga: Fix SOCFPGA build error for Altera dev kitChin Liang See2014-08-29-0/+2
| | | | | | | | | | | | | To fix the build error when build for Altera dev kit, not virtual target. At same time, set the build for Altera dev kit as default instead virtual target. With that, U-Boot is booting well and SPL still lack of few drivers. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* socfpga: fix clock manager register definitionPavel Machek2014-08-29-43/+49
| | | | | | | | | Structure defining clock manager hardware was wrong, leading to wrong registers being accessed and hang in MMC init. This fixes structure to match hardware. Signed-off-by: Pavel Machek <pavel@denx.de>
* ARM:asm:io.h use static inlineJeroen Hofstee2014-08-29-6/+6
| | | | | | | | | | | When compiling u-boot with W=1 the extern inline void for read* is likely causing the most noise. gcc / clang will warn there is never a actual declaration for these functions. Instead of declaring these extern make them static inline so it is actually declared. cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2014-08-29-6/+44
|\
| * keystone2: use EFUSE_BOOTROM information to configure PLLsVitaly Andrianov2014-08-25-0/+38
| | | | | | | | | | | | | | | | | | This patch reads EFUSE_BOOTROM register to see the maximum supported clock for CORE and TETRIS PLLs and configure them accordingly. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * board/ti/dra7xx: add support for parallel NORpekon gupta2014-08-25-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for parallel NOR device (S29GL512S10) present on J6-EVM. The Flash device is connected to GPMC controller on chip-select[0] and accessed as memory-mapped device. It has data-witdh=x16, capacity-64MBytes(512Mbits) and is CFI compatible. As multiple devices are share GPMC pins on this board, so following board settings are required to detect NOR device: SW5.1 (NAND_BOOTn) = OFF (logic-1) SW5.2 (NOR_BOOTn) = ON (logic-0) /* Active-low */ SW5.3 (eMMC_BOOTn) = OFF (logic-1) SW5.4 (QSPI_BOOTn) = OFF (logic-1) And also set appropriate SYSBOOT configurations: SW3.1 (SYSBOOT[ 8])= ON (logic-1) /* selects SYS_CLK1 speed */ SW3.2 (SYSBOOT[ 9])= OFF (logic-0) /* selects SYS_CLK1 speed */ SW3.3 (SYSBOOT[10])= ON (logic-1) /* wait-pin monitoring = enabled */ SW3.4 (SYSBOOT[11])= OFF (logic-0) /* device type: Non Muxed */ SW3.5 (SYSBOOT[12])= OFF (logic-0) /* device type: Non Muxed */ SW3.6 (SYSBOOT[13])= ON (logic-1) /* device bus-width: 1(x16) */ SW3.7 (SYSBOOT[14])= OFF (logic-0) /* reserved */ SW3.8 (SYSBOOT[15])= ON (logic-1) /* reserved */ Also, following changes are required to enable NOR Flash support in dra7xx_evm board profile:
* | Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2014-08-29-19/+3
|\ \
| * | ARM: zynq: Remove spl.hMichal Simek2014-08-19-17/+1
| | | | | | | | | | | | | | | | | | | | | | | | Do not specify own zynq specific SPL macros because there is no need for that. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | ARM: zynq: Move ps7_init() out of spl.hMichal Simek2014-08-19-2/+2
| | | | | | | | | | | | | | | | | | | | | Prepare for spl.h removal. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2014-08-29-0/+71
|\ \ \
| * | | ARM: tegra: add Colibri T30 board supportStefan Agner2014-08-18-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds board support for the Toradex Colibri T30 module. Working functions: - SD card boot - eMMC environment and boot - USB host/USB client (on the dual role port) - Network (via ASIX USB) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: Disable VPRBryan Wu2014-08-18-0/+58
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Tegra114 and Tegra124 platforms, certain display-related registers cannot be accessed unless the VPR registers are programmed. For bootloader, we probably don't care about VPR, so we disable it (which counts as programming it, and allows those display-related registers to be accessed). This patch is based on the commit 5f499646c83ba08079f3fdff6591f638a0ce4c0c in Chromium OS U-Boot project. Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> [acourbot: ensure write went through, vpr.c style changes] Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <TWarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Terje Bergstrom <tbergstrom@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-08-29-21/+2069
|\ \ \
| * | | mx6sxsabresd: Add Ethernet supportFabio Estevam2014-08-20-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6sxsabresd board has 2 FEC ports, each one connected to a AR8031. Add support for one FEC port initially. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | | ARM: mx5: Fix CHSCCDR nameMarek Vasut2014-08-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix the name of the CCM CHSCCDR register. Signed-off-by: Marek Vasut <marex@denx.de>
| * | | mx6: add support of multi-processor commandGabriel Huau2014-08-20-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows u-boot to load different OS or Bare Metal application on different cores of the i.MX6 SoC. For example: running Android on cpu0 and a RT OS like QNX/FreeRTOS on cpu1. Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-08-11-15/+35
| |\ \ \ | | |/ / | | | | | | | | | | | | | | | | | | | | Conflicts: boards.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | | mx6: crm_regs: Fix MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADEDFabio Estevam2014-08-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the Reference Manual the 'mask_periph2_clk_sel_loaded' field of register CCM_CIMR corresponds to bit 19 so fix its definition accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | | mx6: crm_regs: Fix MXC_CCM_CLPCR_WB_PER_AT_LPM definitionFabio Estevam2014-08-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the Reference Manual the 'wb_per_at_lpm' field of register CCM_CLPCR corresponds to bit 16 so fix its definition accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | | mx6: crm_regs: Fix CDCDR_SPDIF0_CLK_PODF mask and offsetFabio Estevam2014-08-08-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the Reference Manual the 'spdif0_clk_podf' field of register CCM_CDCDR corresponds to bits 22, 23 and 24, so fix the mask and offset definitions accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | | mx6: imx-regs: Remove unused 'omux' field from iomux structFabio Estevam2014-08-08-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'omux' field is not used anywhere and such layout is not valid for mx6solox. Instead of adding more ifdef's into the structure, let's simply remove this unused 'omux' field. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-08-08-214/+673
| |\ \ \
| * | | | i.MX6: add enable_spi_clk()Heiko Schocher2014-07-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add enable_spi_clk(), so board code can enable spi clocks. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Stefano Babic <sbabic@denx.de>
| * | | | i.MX6: define struct pwm_regs and PWMCR_* definesHeiko Schocher2014-07-23-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add defines for pwm modul found on imx6. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * | | | imx6: add gpr2 usb_otg_id iomux select control defineHeiko Schocher2014-07-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add IOMUXC_GPR1_USB_OTG_ID_OFFSET and IOMUXC_GPR1_USB_OTG_ID_SEL_MASK define for the USB_OTG_ID_SEL bit. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | | mx6: Adjust the GPR offset for mx6soloxFabio Estevam2014-07-23-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On mx6solox there is an additional 0x4000 offset for the GPR registers. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | | mx6: Remove duplication of iomuxc structureFabio Estevam2014-07-23-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to keep iomuxc_base_regs structure as it serves the exact same purpose of the iomuxc structure, which is to provide access to the GPR registers. The additional fields of iomuxc_base_regs are not used. Other advantage of 'iomuxc' is that it has a shorter name and the variable declarations can fit into a single line. So remove iomuxc_base_regs structure and use iomuxc instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | | Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2014-07-16-241/+689
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de> Conflicts: boards.cfg
| * | | | | mx6sx: Add pin definitionsFabio Estevam2014-07-10-0/+1677
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the pin definitions for mx6sx. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | | | | mx6: Add support for the mx6solox variantFabio Estevam2014-07-10-5/+339
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6solox is the newest member of the mx6 family. Some of the new features on this variants are: - Cortex M4 microcontroller (besides the CortexA9) - Dual Gigabit Ethernet Add the initial support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | | | | | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2014-08-29-4/+10
|\ \ \ \ \ \
| * | | | | | sunxi: dram: Configurable DQS gating window mode and delaySiarhei Siamashka2014-08-12-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hardware DQS gate training is a bit unreliable and does not always find the best delay settings. So we introduce a 32-bit 'dqs_gating_delay' variable, where each byte encodes the DQS gating delay for each byte lane. The delay granularity is 1/4 cycle. Also we allow to enable the active DQS gating window mode, which works better than the passive mode in practice. The DDR3 spec says that there is a 0.9 cycles preamble and 0.3 cycle postamble. The DQS window has to be opened during preamble and closed during postamble. In the passive window mode, the gating window is opened and closed by just using the gating delay settings. And because of the 1/4 cycle delay granularity, accurately hitting the 0.3 cycle long postamble is a bit tough. In the active window mode, the gating window is auto-closing with the help of monitoring the DQS line, which relaxes the gating delay accuracy requirements. But the hardware DQS gate training is still performed in the passive window mode. It is a more strict test, which is reducing the results variance compared to the training with active window mode. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | | | sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'Siarhei Siamashka2014-08-12-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is going to be useful in more than one place. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | | | sunxi: dram: Improve DQS gate data training error handlingSiarhei Siamashka2014-08-12-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The stale error status should be cleared for all sun4i/sun5i/sun7i hardware and not just for sun7i. Also there are two types of DQS gate training errors ("found no result" and "found more than one possible result"). Both are handled now. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | | | sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)Siarhei Siamashka2014-08-12-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sun5i hardware (Allwinner A13) introduced configurable MBUS clock speed. Allwinner A13 uses only 16-bit data bus width to connect the external DRAM, which is halved compared to the 32-bit data bus of sun4i (Allwinner A10), so it does not make much sense to clock a wider internal bus at a very high speed. The Allwinner A13 manual specifies 300 MHz MBUS clock speed limit and 533 MHz DRAM clock speed limit. Newer sun7i hardware (Allwinner A20) has a full width 32-bit external memory interface again, but still keeps the MBUS clock speed configurable. Clocking MBUS too low inhibits memory performance and one has to find the optimal MBUS/DRAM clock speed ratio, which may depend on many factors: http://linux-sunxi.org/A10_DRAM_Controller_Performance This patch introduces a new 'mbus_clock' parameter for the 'dram_para' struct and uses it as a desired MBUS clock speed target. If 'mbus_clock' is not set, 300 MHz is used by default to match the older hardcoded settings. PLL5P and PLL6 are both evaluated as possible clock sources. Preferring the one, which can provide higher clock frequency that is lower or equal to the 'mbus_clock' target. In the case of a tie, PLL5P has higher priority. Attempting to set the MBUS clock speed has no effect on sun4i, but does no harm either. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | | | sunxi: dram: Re-introduce the impedance calibration ond ODTSiarhei Siamashka2014-08-12-0/+4
| | |_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DRAM controller allows to configure impedance either by using the calibration against an external high precision 240 ohm resistor, or by skipping the calibration and loading pre-defined data. The DRAM controller register guide is available here: http://linux-sunxi.org/A10_DRAM_Controller_Register_Guide#SDR_ZQCR0 The new code supports both of the impedance configuration modes: - If the higher bits of the 'zq' parameter in the 'dram_para' struct are zero, then the lowest 8 bits are used as the ZPROG value, where two divisors encoded in lower and higher 4 bits. One divisor is used for calibrating the termination impedance, and another is used for the output impedance. - If bits 27:8 in the 'zq' parameters are non-zero, then they are used as the pre-defined ZDATA value instead of performing the ZQ calibration. Two lowest bits in the 'odt_en' parameter enable ODT for the DQ and DQS lines individually. Enabling ODT for both DQ and DQS means that the 'odt_en' parameter needs to be set to 3. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | | | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-08-28-4/+11
|\ \ \ \ \ \ | |/ / / / /
| * | | | | Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'Albert ARIBAUD2014-08-09-4/+11
| |\ \ \ \ \ | | |_|_|_|/ | |/| | | |
| | * | | | sunxi: add defines to control USB Host clocks/resetsRoman Byshko2014-07-31-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit adds three defines which will be used in the EHCI driver to enable USB clock and assert reset controllers of the corresponding PHYs. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| | * | | | ahci: provide sunxi SATA driver using AHCI platform frameworkIan Campbell2014-07-31-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables the necessary clocks, in AHB0 and in PLL6_CFG. This is done for sun7i only since I don't have access to any other sunxi platforms with sata included. The PHY setup is derived from the Alwinner releases and Linux, but is mostly undocumented. The Allwinner AHCI controller also requires some magic (and, again, undocumented) DMA initialisation when starting a port. This is added under a suitable ifdef. This option is enabled for Cubieboard, Cubieboard2 and Cubietruck based on contents of Linux DTS files, including SATA power pin config taken from the DTS. All build tested, but runtime tested on Cubieboard2 and Cubietruck only. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | | | | emif.h: remove duplicated argument to |maxin.john@enea.com2014-08-09-3/+0
|/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the duplicated argument to | in two places. Reported by Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Maxin B. John <maxin.john@enea.com>
* | | | | Merge http://git.denx.de/u-boot-dmTom Rini2014-08-04-0/+2
|\ \ \ \ \
| * | | | | arm: Set up global data before board_init_f()Simon Glass2014-08-04-0/+2
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present arm defines CONFIG_SYS_GENERIC_GLOBAL_DATA, meaning that the global_data pointer is set up in board_init_f(). However it is actually set up before this, it just isn't zeroed. If we zero the global data before calling board_init_f() then we don't need to define CONFIG_SYS_GENERIC_GLOBAL_DATA. Make this change (on arm32 only) to simplify the init process. I don't have the ability to test aarch64 yet. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Tom Rini <trini@ti.com>
* | | | | mmc: s3c: Add SD driverMarek Vasut2014-08-01-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement SD driver for the S3C24xx family. This implementation is currently only capable of using the PIO transfers, DMA is not supported. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
generated by cgit v1.1 at 2024-07-15 17:18:31 +0000