summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/omap_common.h
Commit message (Collapse)AuthorAgeLines
* board: ti: dra71x-evm: Add PMIC supportKeerthy2016-12-04-0/+1
| | | | | | | | | | | | | | | Add the pmic_data for LP873x PMIC which is used to power up dra71x-evm. Note: As per the DM[1] DRA71x supports only OP_NOM. So, updating the efuse registers only to use OPP_NOM irrespective of any CONFIG_DRA7_<VOLT>_OPP_{NOM,od,high} is defined. [1] http://www.ti.com/product/DRA718/technicaldocuments Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: OMAP4+: Add support for dynamically selecting OPPsLokesh Vutla2016-12-04-2/+21
| | | | | | | | | | | It can be expected that different paper spins of a SoC can have different definitions for OPP and can have their own constraints on the boot up OPP for each voltage rail. In order to have this flexibility, add support for dynamically selecting the OPP voltage based on the board to handle any such exceptions. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: omap5: Add function to make an SMC call on cpu1Harinarayan Bhatta2016-12-03-0/+1
| | | | | | | | | | On DRA7xx platform, CPU Core 1 is not used in u-boot. However, in some cases it is need to make secure API calls from Core 1. This patch adds an assembly function to make a secure (SMC) call from CPU Core #1. Signed-off-by: Harinarayan Bhatta <harinarayan@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: omap-common: add secure smc entryDaniel Allred2016-07-14-0/+6
| | | | | | | | | | | Add an interface for calling secure ROM APIs across a range of OMAP and OMAP compatible high-security (HS) device variants. While at it, also perform minor cleanup/alignment without any change in functionality. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* dra7xx: Enable USB_PHY3 32KHz clockRoger Quadros2016-06-02-0/+1
| | | | | | | DRA7xx has a 32KHz PHY clock for USB_PHY3 that must be enabled for USB1 instance in Super-Speed. Signed-off-by: Roger Quadros <rogerq@ti.com>
* ARM: omap-common: Add device type to CPU stringDaniel Allred2016-05-27-0/+11
| | | | | | | | | | | | | | Update the CPU string output so that the device type is now included as part of the CPU string that is printed as the SPL or u-boot comes up. This update adds a suffix of the form "-GP" or "-HS" for production devices, so that general purpose (GP) and high security (HS) can be distiguished. Applies to all OMAP5 variants. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Add ABB setup for all domainsNishanth Menon2016-04-25-0/+9
| | | | | | | | | | | | | ABB should be initialized for all required domains voltage domain for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units and has been hard to debug. This specifically is a concern with DRA7 generation of SoCs since other than VDD_MPU, all other domains are only permitted to setup the voltages to required OPP only at boot. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* ARM: OMAP5: Enable ABB configuration for MM voltage domainNishanth Menon2016-04-25-0/+4
| | | | | | | | | | Since we setup the voltage and frequency for the MM domain, we *must* setup the ABB configuration needed for the domain as well. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* ARM: OMAP5/DRA7: Move ABB TXDONE mask to voltage structureNishanth Menon2016-04-25-0/+2
| | | | | | | | | | | ABB TX_DONE mask will vary depending on ABB module. For example, 3630 never had ABB on IVA domain, while OMAP5 does use ABB on MM domain, DRA7 has it on all domains with the exception of CORE, RTC. Hence, move the txdone mask definition over to structure describing voltage domain. Signed-off-by: Nishanth Menon <nm@ti.com>
* ARM: OMAP5/DRA7: Get rid of control_std_fuse_opp_vdd_mpu_2Nishanth Menon2016-04-25-1/+0
| | | | | | | | | | | | | This information is already available under vcores->volts.efuse.reg. There is no reason for duplicating the information since AVS Class 0 definitions are common for OMAP5 and DRA7 and defined with STD_FUSE_OPP_* macros. This allows a central location of defining the ABB and voltage definitions especially since they are reused. This also makes it simpler to prevent mistakes involved when changing the boot OPP for the device. Signed-off-by: Nishanth Menon <nm@ti.com>
* ARM: DRA72x: Add support for detection of SR2.0Ravi Babu2016-03-27-0/+1
| | | | | | | | | Add support for detection of SR2.0 version of DRA72x family of processors. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: omap-common: Add standard access for board description EEPROMLokesh Vutla2016-03-14-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several TI EVMs have EEPROM that can contain board description information such as revision, DDR definition, serial number, etc. In just about all cases, these EEPROM are on the I2C bus and provides us the opportunity to centralize the generic operations involved. The on-board EEPROM on the BeagleBone Black, BeagleBone, AM335x EVM, AM43x GP EVM, AM57xx-evm, BeagleBoard-X15 share the same format. However, DRA-7* EVMs, OMAP4SDP use a modified format. We hence introduce logic which is generic between these platforms without enforcing any specific format. This allows the boards to use the relevant format for operations that they might choose. This module will compile for all TI SoC based boards when CONFIG_TI_I2C_BOARD_DETECT is enabled to have optimal build times for platforms that require this support. It is important to note that this logic is fundamental to the board configuration process such as DDR configuration which is needed in SPL, hence cannot be part of the standard u-boot driver model (which is available later in the process). Hence, to aid efficiency, the eeprom contents are copied over to SRAM scratchpad memory area at the first invocation to retrieve data. To prevent churn with cases such as DRA7, where eeprom format maybe incompatible, we introduce a generic common format in eeprom which is made available over accessor functions for usage. Special handling for BBG1 EEPROM had to be introduced thanks to the weird eeprom rev contents used. The follow on patches introduce the use of this library for AM335x, AM437x, and AM57xx. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: OMAP4/5: Centralize gpi2c_initKipisz, Steven2016-03-14-0/+3
| | | | | | | | | | Centralize gpi2c_init into omap_common from the sys_proto header so that the information can be reused across SoCs. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap-common: Common get_board_serial function to pass serial through ATAGPaul Kocialkowski2015-10-22-0/+1
| | | | | | | | | Since there is a common function to grab the serial number from the die id bits, it makes sense have one to parse that serial number and feed it to the serial ATAG. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap-common: Common function to display die id, replacing omap3-specific versionPaul Kocialkowski2015-10-22-0/+1
| | | | | | | | | This introduces omap_die_id_display to display the full die id. There is no need to store it in an environment variable, that no boot script is using anyway. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap-common: Common serial and usbethaddr functions based on die idPaul Kocialkowski2015-10-22-2/+3
| | | | | | | | | Now that we have a common prototype to grab the omap die id, functions to figure out a serial number and usb ethernet address can use it directly. Those also get an omap_die_id prefix for better consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap-common: Common omap_die_id definitionPaul Kocialkowski2015-10-22-0/+2
| | | | | | | | This introduces a common definition for omap_die_id, that aims at providing a common interface for accessing omap platform's die id bits. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: OMAP5: Add functions to enable and disable USB clocksKishon Vijay Abraham I2015-08-28-0/+4
| | | | | | | | | | | Added functions to enable and disable USB clocks which can be invoked during USB init and USB exit respectively. Cc: Roger Quadros <rogerq@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2Kishon Vijay Abraham I2015-08-28-0/+2
| | | | | | | | Enabled clocks for the second dwc3 controller and second USB PHY present in DRA7. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA74-evm: Use SMA_1 spare register to workaround DP83865 phy on SR2.0Nishanth Menon2015-08-28-0/+1
| | | | | | | | | | | | | | | | | | | DP83865 ethernet phy used on DRA74x-evm is quirky and the datasheet provided IODELAY values for standard RGMII phys do not work. Silicon Revision(SR) 2.0 provides an alternative bit configuration that allows us to do a "gross adjustment" to launch the data off a different internal clock edge. Manual IO Delay overrides are still necessary to fine tune the clock-to-data delays. This is a necessary workaround for the quirky ethernet Phy we have on the platform. NOTE: SMA registers are spare "kitchen sink" registers that does contain bits for other workaround as necessary as well. Hence the control for the same is introduced in a generic SoC specific, board generic location. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Add detection of ES2.0Nishanth Menon2015-08-28-0/+1
| | | | | | | | | | | | | | | | | Add support for detection of ES2.0 version of DRA7 family of processors. ES2.0 is an incremental revision with various fixes including the following: - reset logic fixes - few assymetric aging logic fixes - MMC clock rate fixes - Ethernet speed fixes - edma fixes for mcasp [ravibabu@ti.com: posted internal for an older bootloader] Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: OMAP5: Add functions to enable and disable EDMA3 clocksVignesh R2015-08-17-0/+7
| | | | | | | | | Adds functions to enable and disable edma3 clocks which can be invoked by drivers using edma3 to control the clocks. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* ARM: OMAP5: Add support for disabling clocks in ubootKishon Vijay Abraham I2015-08-17-0/+4
| | | | | | | | | Add do_disable_clocks() to disable clock domains and module clocks. These clocks are enabled using do_enable_clocks(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* omap-common: SYS_BOOT-based fallback boot device selection for peripheral bootPaul Kocialkowski2015-07-27-0/+4
| | | | | | | | | | | | | | | | | OMAP devices might boot from peripheral devices, such as UART or USB. When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot) from that peripheral device, but in most cases, this is not a valid boot device. This introduces a fallback option that reads the SYS_BOOT pins, that are used by the bootrom to determine which device to boot from. It is intended for the SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the U-Boot SPL can load the next stage from a valid location. Practically, this options allows loading the U-Boot SPL through USB and have it load the next stage according to the memory device selected by SYS_BOOT instead of stalling. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* omap-common: Common boot code OMAP3 support and cleanupPaul Kocialkowski2015-07-27-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* ARM: BeagleBoard-x15: Enable i2c5 clocksLokesh Vutla2015-06-15-0/+4
| | | | | | | | | On AM57xx evm I2C5 is used to detect the LCD board by reading the EEPROM present on the bus. Enable i2c5 clocks to help that. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Add support for IO delay configurationLokesh Vutla2015-06-12-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | On DRA7, in addition to the regular muxing of pins, an additional hardware module called IODelay which is also expected to be configured. This "IODelay" module has it's own register space that is independent of the control module. It is advocated strongly in TI's official documentation considering the existing design of the DRA7 family of processors during mux or IODelay recalibration, there is a potential for a significant glitch which may cause functional impairment to certain hardware. It is hence recommended to do muxing as part of IOdelay recalibration. IODELAY recalibration sequence: - Complete AVS voltage change on VDD_CORE_L - Unlock IODLAY config registers. - Perform IO delay calibration with predefined values. - Isolate all the IOs - Update the delay mechanism for each IO with new calibrated values. - Configure PAD configuration registers - De-isolate all the IOs. - Relock IODELAY config registers. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* ARM: DRA7: Add is_dra72x cpu check definitionLokesh Vutla2015-06-12-0/+7
| | | | | | | | | A generic is_dra72x cpu check is useful for grouping all the revisions under that. This is used in the subsequent patches. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Set serial number environment variableDileep Katta2015-04-23-0/+5
| | | | | | | | | | | | | | | | | This patch populates serial number environment variable from die_id_0 and die_id_1 register values for DRA7xx boards. The function is added in omap common code so that this can be re-used. Serial# environment variable will be useful to show correct information in "fastboot devices" commands. Ref: http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=a6bcaaf67f6e4bcd97808f53d0ceb4b0c04d583c Signed-off-by: Angela Stegmaier <angelabaker@ti.com> Signed-off-by: Dileep Katta <dileep.katta@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Enable clocks for USB OTGSS and USB PHYKishon Vijay Abraham I2015-04-14-2/+2
| | | | | | | Enabled clocks for dwc3 controller and USB PHY present in DRA7. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* ARM: OMAP: Change set_pl310_ctrl_reg to be genericNishanth Menon2015-03-13-0/+2
| | | | | | | | | | | | | | | | | | | set_pl310_ctrl_reg does use the Secure Monitor Call (SMC) to setup PL310 control register, however, that is something that is generic enough to be used for OMAP5 generation of processors as well. The only difference being the service being invoked for the function. So, convert the service to a macro and use a generic name (same as that used in Linux for some consistency). While at that, also add a data barrier which is necessary as per recommendation. While at this, smc #0 is maintained as handcoded assembly thanks to various gcc version eccentricities, discussion thread: http://marc.info/?t=142542166800001&r=1&w=2 Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Matt Porter <mporter@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: omap_common: expose tps659038 and dra7xx_dpllsFelipe Balbi2014-12-04-0/+3
| | | | | | | | | expose those two definitions so they can be used by another board which we're adding in upcoming patches. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* ARM: OMAP: Fix handling of errata i727Rajendra Nayak2014-07-25-0/+8
| | | | | | | | | | | | The errata is applicable on all OMAP4 (4430 and 4460/4470) and OMAP5 ES 1.0 devices. The current revision check erroneously implements this on all DRA7 varients and with DRA722 device (which has only 1 EMIF instance) infact causes an asynchronous abort and ends up masking it in CPSR, only to be uncovered once the kernel switches to userspace. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate omap_hw_init_contextTom Rini2014-05-23-6/+0
| | | | | | | | | | | | | The omap_hw_init_context function (and assorted helpers) is the same for all OMAP-derived parts as when CHSETTINGS are used, that's the same and our DDR base is also always the same. In order to make this common we simply need to update the names of the define for DDR address space which is also common. Cc: Sricharan R. <r.sricharan@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA72x: Add Silicon ID supportLokesh Vutla2014-05-23-0/+1
| | | | | | | Add silicon ID code for DRA722 silicon. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tom Rini <trini@ti.com>
* OMAP: common: consolidate fake USB ethernet MAC address creationNishanth Menon2014-04-17-0/+2
| | | | | | | | | | | | | | TI platforms such as OMAP5uevm, PandaBoard, use equivalent logic to generate fake USB MAC address from device unique DIE ID. Consolidate this to a generic location such that other TI platforms such as BeagleBoard-XM can also use the same. NOTE: at this point in time, I dont yet see a need for a generic dummy ethernet MAC address creation function, but if there is a need in the future, this can be further abstracted out. Signed-off-by: Nishanth Menon <nm@ti.com>
* DRA7: Add support for ES1.1 silicon ID codeNishanth Menon2014-01-24-0/+1
| | | | | | | | ES1.1 silicon is a very minor variant of ES1.0. Add priliminary support for ES1.1 IDCODE change. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALLJassi Brar2014-01-24-1/+0
| | | | | | | | | The commit f3f98bb0 : "ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls" removed the config option aimed towards moving that stuff into kernel, which renders some code unreachable. Remove that code. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
* ARM: OMAP5: Add PRCM and Control information for SATARoger Quadros2013-12-04-0/+2
| | | | | | | Adds the necessary PRCM and Control register information for SATA on OMAP5. Signed-off-by: Roger Quadros <rogerq@ti.com>
* ARM: DRA7: Add is_dra7xx cpu check definitionSRICHARAN R2013-12-04-0/+8
| | | | | | | | A generic is_dra7xx cpu check is useful for grouping all the revisions under that. This is used in the subsequent patches. Signed-off-by: Sricharan R <r.sricharan@ti.com>
* usb: dra7xx: Add support for dra7xx xhci USB hostDan Murphy2013-10-20-0/+1
| | | | | | | | | | | Add the support for the dra7xx xhci usb host. dra7xx does not contain an EHCI controller so the headers can be removed from the board file. The xHCI host on dra7xx is connected to a usb2 phy so need to add support to enable those clocks. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* ARM: OMAP5: Add registers and defines for USBOTG SSDan Murphy2013-10-20-0/+4
| | | | | | | Add the prcm registers and the bit definitions to enable the USB SS port of the OMAP5 device. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* omap5: add qspi supportMatt Porter2013-10-07-0/+1
| | | | | | | | Add QSPI definitions and clock configuration support. Signed-off-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* ARM: OMAP5: Avoid writing into LDO SRAM bitsLokesh Vutla2013-09-20-6/+0
| | | | | | | | | | | Writing magic bits into LDO SRAM was suggested only for OMAP5432 ES1.0. Now these are no longer applicable. Moreover these bits should not be overwritten as they are loaded from EFUSE. So avoid writing into these registers. Boot tested on OMAP5432 ES2.0 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: OMAP4470: Add OMAP4470 identificationTaras Kondratiuk2013-08-28-0/+1
| | | | Signed-off-by: Taras Kondratiuk <taras@ti.com>
* ARM: DRA7xx: Add CPSW support to DRA7xx EVMMugunthan V N2013-07-26-0/+4
| | | | | | Adding support for CPSW Ethernet support found in DRA7xx EVM Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* ARM: DRA7xx: Enable GMAC clock controlMugunthan V N2013-07-26-0/+4
| | | | | | Enabling CPSW module by enabling GMAC clock control Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* ARM: DRA7xx: Lock DPLL_GMACLokesh Vutla2013-07-26-0/+2
| | | | | | | | | Locking DPLL_GMAC [mugunthanvnm@ti.com:Configure only if CPSW is selected] Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-17/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-06-13-4/+55
|\ | | | | | | | | | | | | | | | | Small conflict over DRA7XX updates and adding SRAM_SCRATCH_SPACE_ADDR Conflicts: arch/arm/include/asm/arch-omap5/omap.h Signed-off-by: Tom Rini <trini@ti.com>
generated by cgit v1.1 at 2024-11-01 09:29:32 +0000