summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/armv8
Commit message (Collapse)AuthorAgeLines
* ARMv8/layerscape: Add FSL PPA supportHou Zhiqiang2016-07-19-0/+4
| | | | | | | | | | | The FSL Primary Protected Application (PPA) is a software component loaded during boot which runs in TrustZone and remains resident after boot. Use the secure firmware framework to integrate FSL PPA into U-Boot. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* ARMv8: add the secure monitor firmware frameworkHou Zhiqiang2016-07-19-0/+18
| | | | | | | | | | | | | | | | | This framework is introduced for ARMv8 secure monitor mode firmware. The main functions of the framework are, on EL3, verify the firmware, load it to the secure memory and jump into it, and while it returned to U-Boot, do some necessary setups at the 'target exception level' that is determined by the respective secure firmware. So far, the framework support only FIT format image, and need to define the name of which config node should be used in 'configurations' and the name of property for the raw secure firmware image in that config. The FIT image should be stored in Byte accessing memory, such as NOR Flash, or else it should be copied to main memory to use this framework. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: mmu: Add support of non-identical mappingYork Sun2016-07-15-1/+2
| | | | | | | Introduce virtual and physical addresses in the mapping table. This change have no impact on existing boards because they all use idential mapping. Signed-off-by: York Sun <york.sun@nxp.com>
* armv8: mmu: house cleaningYork Sun2016-07-15-0/+2
| | | | | | | | Make setup_pgtages() and get_tcr() available for platform code to customize MMU tables. Remove unintentional call of create_table(). Signed-off-by: York Sun <york.sun@nxp.com>
* arm64: Remove non-full-va map codeAlexander Graf2016-03-15-65/+1
| | | | | | | | | | | By now the code to only have a single page table level with 64k page size and 42 bit address space is no longer used by any board in tree, so we can safely remove it. To clean up code, move the layerscape mmu code to the new defines, removing redundant field definitions. Signed-off-by: Alexander Graf <agraf@suse.de>
* thunderx: Move mmu table into board fileAlexander Graf2016-03-15-0/+2
| | | | | | | | | The MMU range table can vary depending on things we may only find out at runtime. While the very simple ThunderX variant does not change, other boards will, so move the definition from a static entry in a header file to the board file. Signed-off-by: Alexander Graf <agraf@suse.de>
* arm64: Make full va map code more dynamicAlexander Graf2016-03-15-37/+31
| | | | | | | | | | | | | | | | | | | The idea to generate our pages tables from an array of memory ranges is very sound. However, instead of hard coding the code to create up to 2 levels of 64k granule page tables, we really should just create normal 4k page tables that allow us to set caching attributes on 2M or 4k level later on. So this patch moves the full_va mapping code to 4k page size and makes it fully flexible to dynamically create as many levels as necessary for a map (including dynamic 1G/2M pages). It also adds support to dynamically split a large map into smaller ones when some code wants to set dcache attributes. With all this in place, there is very little reason to create your own page tables in board specific files. Signed-off-by: Alexander Graf <agraf@suse.de>
* arm64: Disable TTBR1 maps in EL1Alexander Graf2016-03-15-0/+1
| | | | | | | | | | | | When running in EL1, AArch64 knows two page table maps. One with addresses that start with all zeros (TTBR0) and one with addresses that start with all ones (TTBR1). In U-Boot we don't care about the high up maps, so just disable them to ensure we don't walk an invalid page table by accident. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* thunderx: Calculate TCR dynamicallyAlexander Graf2016-03-15-5/+1
| | | | | | | | Based on the memory map we can determine a lot of hard coded fields of TCR, like the maximum VA and max PA we want to support. Calculate those dynamically to reduce the chance for pit falls. Signed-off-by: Alexander Graf <agraf@suse.de>
* armv8: New MMU setup code allowing to use 48+ bits PA/VASergey Temerkhanov2016-01-19-6/+76
| | | | | | | | | | | | | This patch adds code which sets up 2-level page tables on ARM64 thus extending available VA space. CPUs implementing 64k translation granule are able to use direct PA-VA mapping of the whole 48 bit address space. It also adds the ability to reset the SCTRL register at the very beginning of execution to avoid interference from stale mappings set up by early firmware/loaders/etc. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
* armv8/layerscape: Update MMU table with execute-never bitsAlison Wang2015-11-30-1/+1
| | | | | | | | | | For most device addresses excution shouldn't be allowed. Revise the MMU table to enforce execute-never bits. OCRAM, DDR and IFC are allowed for excution. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Reported-by: Zhichun Hua <zhichun.hua@freescale.com>
* armv8/fsl_lsch2: Add fsl_lsch2 SoCMingkai Hu2015-10-29-0/+1
| | | | | | | | | | | Freescale LayerScape with Chassis Generation 2 is a set of SoCs with ARMv8 cores and 2rd generation of Chassis. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/mmu: Set bits marked RES1 in TCRThierry Reding2015-10-15-0/+4
| | | | | | | | | | | For EL3 and EL2, the documentation says that bits 31 and 23 are reserved but should be written as 1. For EL1, only bit 23 is not reserved, so only write bit 31 as 1. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* armv8/mmu: Clean up TCR programmingThierry Reding2015-10-15-2/+2
| | | | | | | | | Use the inner shareable attribute for memory, which makes more sense considering that this code is called when caches are being enabled. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* armv8: fsl-lsch3: Rewrite MMU translation table entriesAlison Wang2015-09-01-1/+7
| | | | | | | | | This patch rewrites MMU translation table entries. To start, all table entries are written as "invalid", then "device-ngnrnr" and "normal" are written to the entries to enable access to specific addresses. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
* armv8: Fix TCR macros for shareability attributeZhichun Hua2015-07-20-2/+2
| | | | | | | | For ARMv8, outer shareable is 0b10, inner shareable is 0b11 at bit position [13:12] of TCR_ELx register. Signed-off-by: Zhichun Hua <zhichun.hua@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
* armv8/fsl-lsch3: Change normal memory shareabilityYork Sun2015-02-24-1/+2
| | | | | | | According to hardware implementation, a single outer shareable global coherence group is defined. Inner shareable has not bee enabled. Signed-off-by: York Sun <yorksun@freescale.com>
* ARMv8: Adjust MMU setupYork Sun2014-07-03-0/+24
| | | | | | | Make MMU function reusable. Platform code can setup its own MMU tables. Signed-off-by: York Sun <yorksun@freescale.com> CC: David Feng <fenghua@phytium.com.cn>
* arm64: core supportDavid Feng2014-01-09-0/+111
Relocation code based on a patch by Scott Wood, which is: Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>