summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-tegra
Commit message (Collapse)AuthorAgeLines
* tegra: Convert tegra GPIO driver to use driver modelSimon Glass2014-09-10-6/+9
| | | | | | | | | | | | | | | | This is an implementation of GPIOs for Tegra that uses driver model. It has been tested on trimslice and also using the new iotrace feature. The implementation uses a top-level GPIO device (which has no actual GPIOS). Under this all the banks are created as separate GPIO devices. The GPIOs are named as per the Tegra datasheet/header files: A0..A7, B0..B7, ..., Z0..Z7, AA0..AA7, etc. Since driver model is not yet available before relocation, or in SPL, a special function is provided for seaboard's SPL code. Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM: tegra: Disable VPRBryan Wu2014-08-18-0/+9
| | | | | | | | | | | | | | | | | | | | | | On Tegra114 and Tegra124 platforms, certain display-related registers cannot be accessed unless the VPR registers are programmed. For bootloader, we probably don't care about VPR, so we disable it (which counts as programming it, and allows those display-related registers to be accessed). This patch is based on the commit 5f499646c83ba08079f3fdff6591f638a0ce4c0c in Chromium OS U-Boot project. Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> [acourbot: ensure write went through, vpr.c style changes] Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <TWarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Terje Bergstrom <tbergstrom@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* i2c: tegra: use repeated start for readsStephen Warren2014-07-03-0/+2
| | | | | | | | | | | | | | | | | I2C read transactions are typically implemented as follows: START(write) address REPEATED_START(read) data... STOP However, Tegra's I2C driver currently implements reads as follows: START(write) address STOP START(read) data... STOP This sequence confuses at least the AS3722 PMIC on the Jetson TK1 board, leading to corrupted read data in some cases. Fix the driver to chain the transactions together using repeated starts to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Yen Lin <yelin@nvidia.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-05-22-2/+25
|\
| * ARM: tegra: add function to enable input clamping on tristateStephen Warren2014-05-13-0/+5
| | | | | | | | | | | | | | | | | | The HW-defined procedure for booting Tegra requires that CLAMP_INPUTS_WHEN_TRISTATED be enabled before programming the pinmux. Add a function to the pinmux driver to allow boards to do this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: add GPIO initialization table functionStephen Warren2014-05-13-0/+20
| | | | | | | | | | | | | | | | | | | | | | The HW-defined procedure for booting Tegra requires that some pins be set up as GPIOs immediately at boot in order to avoid glitches on those pins, when the pinmux is programmed. Add a feature to the GPIO driver which executes a GPIO configuration table. Board files will use this to implement the correct HW initialization procedure. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICEStephen Warren2014-05-13-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_API is ever to be enabled on Tegra, this define must be set, since api/api_storage.c uses it. A couple of annoyting things about CONFIG_SYS_MMC_MAX_DEVICE 1) It isn't documented in README. The same is true for a lot of similar defines used by api_storage.c. 2) It doesn't represent MAX_DEVICE but rather NUM_DEVICES, since the valid values are 0..n-1 not 0..n. However, I this patch does not address those shortcomings. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | usb: tegra: support device modeStephen Warren2014-05-15-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few changes are made to the Tegra EHCI driver so that it can set everything up for device-mode operation on the first USB controller. This can be used in conjunction with ci_udc.c to operate as a USB device. Detailed changes are: * Rename set_host_mode() to set_up_vbus() since that's really what it does. * Modify set_up_vbus() to know whether it's initializing in host or device mode, and: - Skip the external VBUS check in device mode, since external VBUS is expected in this case. - Disable VBUS output in device mode. * Modify init_phy_mux() to know whether it's initializing in host or device mode, and hence skip setting USBMODE_CM_HC (which enables host mode) in device mode. See the comments in that function for why this is safe w.r.t. the ordering requirements of PHY selection. * Modify init_utmi_usb_controller() to force "b session valid" in device mode, since the HW requires this. This is done in UTMI-specific code, since we only support device mode on the first USB controller, and that controller can only talk to a UTMI PHY. * Enhance ehci_hcd_init() to error-check the requested host-/device-mode vs. the dr_mode (dual-role mode) value present in device tree, and the HW configurations which support device mode. * Enhance ehci_hcd_init() not to skip HW initialization when switching between host and device mode on a controller. This requires remembering which mode the last initialization used. Cc: Jim Lin <jilin@nvidia.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: pack pinmux data tables tighterStephen Warren2014-04-17-21/+21
| | | | | | | | | | | | | | | | Use smaller fields in the Tegra pinmux structures in order to pack the data tables into a smaller space. This saves around 1-3KB for the SPL and around 3-8KB for the main build of U-Boot, depending on the board, which SoC it uses, and how many pinmux table entries there are. In order to pack PMUX_FUNC_* into a smaller space, don't hard-code the values of PMUX_FUNC_RSVD* to values which require 16 bits to store them, but instead let their values be assigned automatically, so they end up fitting into 8 bits. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* usb: tegra: combine header fileStefan Agner2014-04-17-1/+225
| | | | | | | | | | | Combine the Tegra USB header file into one header file for all SoCs. Use ifdef to account for the difference, especially Tegra20 is quite different from newer SoCs. This avoids duplication, mainly for Tegra30 and newer devices. Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
* usb: tegra: fix PHY configurationStefan Agner2014-04-17-5/+0
| | | | | | | | | | | | | | | | On Tegra30 and later, the PTS (parallel transceiver select) and STS (serial transceiver select) are part of the HOSTPC1_DEVLC_0 register rather than PORTSC1_0 register. Since the reset configuration usually matches the intended configuration, this error did not show up on Tegra30 devices. Also use the slightly different bit fields of first USB, (USBD) on Tegra20 and move those definitions to the Tegra20 specific header file. Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pinmux naming consistency fixesStephen Warren2014-04-17-43/+45
| | | | | | | | | | | | | | | Clean up the naming of pinmux-related objects: * Refer to drive groups rather than pad groups to match the Linux kernel. * Ensure all pinmux API types are prefixed with pmux_, values (defines) are prefixed with PMUX_, and functions prefixed with pinmux_. * Modify a few type names to make their content clearer. * Minimal changes to SoC-specific .h/.c files are made so the code still compiles. A separate per-SoC change will be made immediately following, in order to keep individual patch size down. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: reduce public pinmux APIStephen Warren2014-04-17-6/+0
| | | | | | | | | | | Remove a few unused functions from the pinmux header. They aren't currently used, and removing them prevents any new usage from appearing. This will ease moving to just pinmux_config_table() and padgrp_config_table() in the future. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pinctrl: remove duplicationStephen Warren2014-04-17-0/+189
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Much of arch/arm/cpu/tegra*-common/pinmux.c is identical. Remove the duplication by creating pinmux-common.c for all the identical code. This leaves: * arch/arm/include/asm/arch-tegra*/pinmux.h defining only the names of the various pins/pin groups, drive groups, and mux functions. * arch/arm/cpu/tegra*-common/pinmux.c containing only the lookup table stating which pin groups support which mux functions. The code in pinmux-common.c is semantically identical to that in the various original pinmux.c, but had some consistency and cleanup fixes applied during migration. I removed the definition of struct pmux_tri_ctlr, since this is different between SoCs (especially Tegra20 vs all others), and it's much simpler to deal with this via the new REG/MUX_REG/... defines. spl.c, warmboot.c, and warmboot_avp.c needed updates due to this, since they previously hijacked this struct to encode the location of some non-pinmux registers. Now, that code simply calculates these register addresses directly using simple and obvious math. I like this method better irrespective of the pinmux code cleanup anyway. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: use apb_misc.h in more placesStephen Warren2014-04-17-0/+22
| | | | | | | | | | | | | | | | | Tegra's "APB misc" register region contains various miscellaneous registers and the Tegra pinmux registers. Some code that touches the misc registers currently uses struct pmux_tri_ctlr, which is intended to be a definition of pinmux registers, rather than struct apb_misc_pp_ctrl, which is intended to be a definition of the miscellaneous registers. Convert all such code to use struct apb_misc_pp_ctrl, since struct pmux_tri_ctlr goes away in the next patch. This requires adding a missing field definition to struct apb_misc_pp_ctrl, and moving the header into a more common location. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: prototype pinmux_init() in board.hStephen Warren2014-04-17-0/+1
| | | | | | | | | pinmux_init() is a board-level function, not a pinmux driver function. Move the prototype to a board header rather than the driver header. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* mmc: Split mmc struct, rework mmc initialization (v2)Pantelis Antoniou2014-03-24-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The way that struct mmc was implemented was a bit of a mess; configuration and internal state all jumbled up in a single structure. On top of that the way initialization is done with mmc_register leads to a lot of duplicated code in drivers. Typically the initialization got something like this in every driver. struct mmc *mmc = malloc(sizeof(struct mmc)); memset(mmc, 0, sizeof(struct mmc); /* fill in fields of mmc struct */ /* store private data pointer */ mmc_register(mmc); By using the new mmc_create call one just passes an mmc config struct and an optional private data pointer like this: struct mmc = mmc_create(&cfg, priv); All in tree drivers have been updated to the new form, and expect mmc_register to go away before long. Changes since v1: * Use calloc instead of manually calling memset. * Mark mmc_register as deprecated. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* ARM: tegra: fix NV_PA_CSITE_BASE for Tegra124Stephen Warren2014-03-05-0/+5
| | | | | | | | Tegra124 moved the CSITE block's base address. Fix U-Boot to use the correct address. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: fix pmc_pwrgate_timer_mult register definitionStephen Warren2014-03-05-0/+11
| | | | | | | | | | | | Register pmc_pwrgate_timer_mult has a different layout on Tegra114 and Tegra124. Reflect this in pmc.h. Also, simply write the whole of the register in start_cpu() rather than doing a read-modify-write; the register is simple enough that the code can easily construct the entire desired value. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: add/edit headers for Tegra124Tom Warren2014-02-03-28/+386
| | | | | | | | | | | | | | | | These headers define the Tegra124 hardware. Add them to the usual place. Add Tegra124 chip ID/SKU ID definitions to common headers. There's no real HW change on Tegra124 for 90% of the toys, so it might make sense for a future patch to unify some of the content of these files in a common location. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pass just partition ID to power_partition()Stephen Warren2014-02-03-6/+3
| | | | | | | | | | | | | Pass just the partition ID to power_partition(), rather than also passing the partition's status register mask too. This makes it simpler to get call-sites correct, since they don't need to pass two different values that define the same thing and must match. Consequently, we can remove the mask definitions from pmc.h. Suggested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: misc cleanups triggered by Tegra124 reviewStephen Warren2014-02-03-0/+3
| | | | | | | | | | | | Use a named constant for the PLL lock bit in enable_cpu_clocks(). Construct the complete value of pmc_pwrgate_toggle, rather than doing a read-modify-write; the register is simple enough and doesn't need to maintain state between operations. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: don't exceed AVP limits when configuring PLLPJimmy Zhang2014-02-03-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | Based on the Tegra TRM, the system clock (which is the AVP clock) can run up to 275MHz. On power on, the default sytem clock source is set to PLLP_OUT0. In function clock_early_init(), PLLP_OUT0 will be set to 408MHz which is beyond system clock's upper limit. The fix is to set the system clock to CLK_M before initializing PLLP, and then switch back to PLLP_OUT4, which has an appropriate divider configured, after PLLP has been configured Implement this logic in new function tegra30_set_up_pllp(), which sets up PLLP and all PLLP_OUT* dividers, and handles the AVP clock switching. Remove the duplicate PLLP setup from pllx_set_rate() and adjust_pllp_out_freqs(). Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> [swarren, significantly refactored the change] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: amend pmc.h for Tegra114+Stephen Warren2014-02-03-1/+5
| | | | | | | | | | | | | | | | | | | | Tegra114 and later's PMC module removes the pwrgate_timer_on register and replaces it with a clamp_status register. Adjust pmc.h to reflect this, and update any code affected by the change. The cpu.c change in this patch was extracted from a much larger patch by Jimmy Zhang. The pmc.h change was written from scratch, but inspired by related changes made by Tom Warren. There could well be other differences in the PMC register set for chips after Tegra20/30. However, they don't affect the code in U-Boot at present, so I haven't attempted an exhaustive update of pmc.h. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: implement MASK_BITS_31_29Tom Warren2014-02-03-0/+3
| | | | | | | | | | | | | Some clock sources have 3-bit muxes in bits 31:29. Implement core support for this mux field. Signed-off-by: Tom Warren <twarren@nvidia.com> [swarren, extracted from a larger patch by Tom] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: MASK_BITS_ no longer needs specific valuesStephen Warren2014-02-03-1/+1
| | | | | | | | | | | | | | | | | | Since all code that sets or interprets MASK_BITS_* now uses the enums to define/compare the values, there is no need for MASK_BITS_* to have a specific integer value. In fact, having a specific integer value may encourage people to hard-code those values, or interpret the values in incorrect ways. As such, remove the logic that assigns a specific value to the enum values in order to make it completely clear that it's just an enum, not something that directly represents some integer value. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: rename OUT_CLK_SOURCE_*Stephen Warren2014-02-03-4/+5
| | | | | | | | | | | | | | | OUT_CLK_SOURCE_ are currently named after the number of bits the mask they represent includes. However, bit count is not the only possible variable; bit position may also vary. Rename OUT_CLK_SOURCE_ to OUT_CLK_SOURCE_31_30_ and OUT_CLK_SOURCE4_ to OUT_CLK_SOURCE_31_28 to more completely describe exactly what they represent, without having to go look up the definitions. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: rename MASK_BITS_29_28 to MASK_BITS_31_28Stephen Warren2014-02-03-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | The only place where the MASK_BITS_* values are used is in adjust_periph_pll(), which interprets the value 4 (old MASK_BITS_29_28, new MASK_BITS_31_28) as being associated with mask OUT_CLK_SOURCE4_MASK, i.e. bits 31:28. Rename the MASK_BITS_ macro to reflect how it's actually implemented. Note that no Tegra clock register actually uses all of bits 31:28 as the mux field. Rather, bits 30:28, 29:28, or 28 are used. However, in those cases, nothing is stored in the bits above the mux field, so it's safe to pretend that the mux field extends all the way to the end of the register. As such, the U-Boot clock driver is currently a bit lazy, and doesn't distinguish between 31:28, 30:28, 29:28 and 28; it just lumps them all together and pretends they're all 31:28. This patch doesn't cause this issue; it was pre-existing. Hopefully, future patches will clean this up. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: deduplicate MASK_BITS_xxx clock mux enumTom Warren2014-02-03-0/+6
| | | | | | | | | | | | | | | The enum used to define the set of register bits used to represent a clock's input mux, MUX_BITS_*, is defined separately for each SoC at present. Move this definition to a common location to ease fixing up some issues with the definition, and the code that uses it. Signed-off-by: Tom Warren <twarren@nvidia.com> [swarren, extracted from a larger patch by Tom] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* arm: tegra: Fix the CPU complex reset masksAlban Bedel2013-12-18-3/+3
| | | | | | | | | | | | | The CPU complex reset masks are not matching with the datasheet for the CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET/CLR_0 registers. For both T20 and T30 the register consist of groups of 4 bits, with one bit for each CPU core. On T20 the 2 high bits of each group are always stubbed as there is only 2 cores. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swrren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: support SKU b1 of Tegra30Alban Bedel2013-12-18-0/+1
| | | | | | | | Add the Tegra30 SKU b1 and treat it like other Tegra30 chips. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Reviewed-by: Julian Scheel <julian.scheel@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* usb: new board-specific USB init interfaceMateusz Zalega2013-10-20-2/+1
| | | | | | | | | | | | | | This commit unifies board-specific USB initialization implementations under one symbol (usb_board_init), declaration of which is available in usb.h. New API allows selective initialization of USB controllers whenever needed. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-283/+17
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114Jim Lin2013-07-11-139/+53
| | | | | | | | | | Tegra30 and Tegra114 are compatible except PLL parameters. Tested on Tegra30 Cardhu, and Tegra114 Dalmore platforms. All works well. Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: support SKU 7 of Tegra20Stephen Warren2013-05-28-0/+1
| | | | | | | | | | Make U-Boot aware of the Tegra20 SKU 7, and treat it identically to any other Tegra20. My Whistler board has a SoC with this SKU. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: support SKU 1 of Tegra114Stephen Warren2013-05-28-0/+1
| | | | | | | | | | | | Make U-Boot aware of the Tegra114 SKU 1, and treat it identically to any other Tegra114. This value is used on (at least some) Dalmore boards with a production rather than engineering chip. Such boards are in the hands of some partners who want to use upstream U-Boot. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra: Split tegra_get_chip_type() into soc & sku funcsTom Warren2013-04-15-2/+18
| | | | | | | | | | | As suggested by Stephen Warren, use tegra_get_chip() to return the pure CHIPID for a Tegra SoC (i.e. 0x20 for Tegra20, 0x30 for Tegra30, etc.) and rename tegra_get_chip_type() to reflect its true function, i.e. tegra_get_chip_sku(), which returns an ID like TEGRA_SOC_T25, TEGRA_SOC_T33, etc. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* Tegra114: Initialize System Counter (TSC) with osc frequencyTom Warren2013-04-15-0/+3
| | | | | | | | | T114 needs the SYSCTR0 counter initialized so the TSC can be read by the kernel. Do it in the bootloader since it's a write-once deal (secure/non-secure mode dependent). Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* Tegra: Configure L2 cache control reg properly.Tom Warren2013-04-15-0/+1
| | | | | | | | | | Without this change, kernel fails at calling function cache_clean_flush during kernel early boot. Aprocryphally, intended for T114 only, so I check for a T114 SoC. Works (i.e. dalmore 3.8 kernel now starts printing to console). Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: support T33 SKU of Tegra30Stephen Warren2013-04-15-0/+1
| | | | | | | | | | | | | | | | | | | Make U-Boot aware of the T33 SKU of Tegra30, and treat it identically to any other Tegra30. An alternative would be to simply remove the SKU checking from tegra_get_chip_type(); most use of the value most likely simply wants to know the current chip, not the specific SKU. Or, the function could be split into separate tegra_get_chip() and tegra_get_sku() for the cases where differentiation really is required. I wonder whether tegra_get_chip_type() should printf() whenever any unkown chip/SKU is found, although perhaps the function is called so early that the printf() wouldn't actually make it to the UART anyway. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* tegra: spi: rename tegra SPI driversAllen Martin2013-03-25-159/+0
| | | | | | | | | Rename tegra SPI drivers to tegra20_flash and tegra20_slink in preparation for commonization and addition of tegra114_spi. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* tegra: remove support for UART SPI switchAllen Martin2013-03-25-2/+1
| | | | | | | | | | This feature was only used for tegra20 seaboard that had a pinmux conflict on the SPI pins. These boards were never manufactured, so remove this support to clean up SPI driver. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* Tegra: MMC: Added/update SDMMC registers/base addresses for T20/T30Tom Warren2013-03-14-6/+29
| | | | | | | | Removed SDMMC base addresses from tegra.h since they're no longer used. Added additional vendor-specific SD/MMC registers and bus power defines. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* Tegra: MMC: Add DT support to MMC driver for all T20 boardsTom Warren2013-03-14-5/+10
| | | | | | | | | | | | tegra_mmc_init() now parses the DT info for bus width, WP/CD GPIOs, etc. Tested on Seaboard, fully functional. Tamonten boards (medcom-wide, plutux, and tec) use a different/new dtsi file w/common settings. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* Tegra: I2C: Add T114 clock support to tegra_i2c driverTom Warren2013-03-14-0/+6
| | | | | | | | | | | | | T114 has a slightly different I2C clock, with a new (extra) divisor in standard/fast mode and HS mode. Tested on my Dalmore, and the I2C clock is 100KHz +/- 3Hz on my Saleae Logic analyzer. Added a new entry in compat_names for T114 I2C since it differs from the previous Tegra SoCs. A flag is set when T114 I2C HW is found so new features like the extra clock divisor can be used. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
* tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]Lucas Stach2013-03-14-19/+0
| | | | | | | | | | The ehci_hcd entry points were just calling into the Tegra USB functions. Now that they are in the same file we can just move over the implementation. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: usb: move implementation into right directoryLucas Stach2013-03-14-0/+268
| | | | | | | | | | | | | | | | This moves the Tegra USB implementation into the drivers/usb/host directory. Note that this merges the old /arch/arm/cpu/armv7/tegra20/usb.c file into ehci-tegra.c. No code changes, just moving stuff around. v2: While at it also move some defines and the usb.h header file to make usb driver usable for Tegra30. NOTE: A lot more work is required to properly init the PHYs and PLL_U on Tegra30, this is just to make porting easier and it does no harm here. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra114: Add arch-tegra114 include filesTom Warren2013-02-11-5/+62
| | | | | | | | | | Common Tegra files are in arch-tegra, shared between T20/T30/T114. Tegra114-specific headers are in arch-tegra114. Note that some of these will be filled in as more T114 support is added (drivers, WB/LP0 support, etc.). Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* tegra: add SPI SLINK driverAllen Martin2013-02-11-0/+84
| | | | | | | | | | | | | | | | | | | | | | Add driver for tegra SPI "SLINK" style driver. This controller is similar to the tegra20 SPI "SFLASH" controller. The difference is that the SLINK controller is a genernal purpose SPI controller and the SFLASH controller is special purpose and can only talk to FLASH devices. In addition there are potentially many instances of an SLINK controller on tegra and only a single instance of SFLASH. Tegra20 is currently ths only version of tegra that instantiates an SFLASH controller. This driver supports basic PIO mode of operation and is configurable (CONFIG_OF_CONTROL) to be driven off devicetree bindings. Up to 4 devices per controller may be attached, although typically only a single chip select line is exposed from tegra per controller so in reality this is usually limited to 1. To enable this driver, use CONFIG_TEGRA_SLINK Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: add addresses of SPI SLINK controllersAllen Martin2013-02-11-0/+6
| | | | | | | | Add I/O addresses of SPI SLINK controllers 1-6 Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
generated by cgit v1.1 at 2024-12-27 10:57:33 +0000