summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-tegra/usb.h
Commit message (Collapse)AuthorAgeLines
* ARM: Tegra210: Add support to common Tegra source/config filesTom Warren2015-07-28-0/+3
| | | | | | | | | | | Derived from Tegra124, modified as appropriate during T210 board bringup. Cleaned up debug statements to conserve string space, too. This also adds misc 64-bit changes from Thierry Reding/Stephen Warren. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: tegra: support device modeStephen Warren2014-05-15-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few changes are made to the Tegra EHCI driver so that it can set everything up for device-mode operation on the first USB controller. This can be used in conjunction with ci_udc.c to operate as a USB device. Detailed changes are: * Rename set_host_mode() to set_up_vbus() since that's really what it does. * Modify set_up_vbus() to know whether it's initializing in host or device mode, and: - Skip the external VBUS check in device mode, since external VBUS is expected in this case. - Disable VBUS output in device mode. * Modify init_phy_mux() to know whether it's initializing in host or device mode, and hence skip setting USBMODE_CM_HC (which enables host mode) in device mode. See the comments in that function for why this is safe w.r.t. the ordering requirements of PHY selection. * Modify init_utmi_usb_controller() to force "b session valid" in device mode, since the HW requires this. This is done in UTMI-specific code, since we only support device mode on the first USB controller, and that controller can only talk to a UTMI PHY. * Enhance ehci_hcd_init() to error-check the requested host-/device-mode vs. the dr_mode (dual-role mode) value present in device tree, and the HW configurations which support device mode. * Enhance ehci_hcd_init() not to skip HW initialization when switching between host and device mode on a controller. This requires remembering which mode the last initialization used. Cc: Jim Lin <jilin@nvidia.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: tegra: combine header fileStefan Agner2014-04-17-1/+225
| | | | | | | | | | | Combine the Tegra USB header file into one header file for all SoCs. Use ifdef to account for the difference, especially Tegra20 is quite different from newer SoCs. This avoids duplication, mainly for Tegra30 and newer devices. Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
* usb: tegra: fix PHY configurationStefan Agner2014-04-17-5/+0
| | | | | | | | | | | | | | | | On Tegra30 and later, the PTS (parallel transceiver select) and STS (serial transceiver select) are part of the HOSTPC1_DEVLC_0 register rather than PORTSC1_0 register. Since the reset configuration usually matches the intended configuration, this error did not show up on Tegra30 devices. Also use the slightly different bit fields of first USB, (USBD) on Tegra20 and move those definitions to the Tegra20 specific header file. Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
* usb: new board-specific USB init interfaceMateusz Zalega2013-10-20-2/+1
| | | | | | | | | | | | | | This commit unifies board-specific USB initialization implementations under one symbol (usb_board_init), declaration of which is available in usb.h. New API allows selective initialization of USB controllers whenever needed. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-16/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114Jim Lin2013-07-11-139/+43
| | | | | | | | | | Tegra30 and Tegra114 are compatible except PLL parameters. Tested on Tegra30 Cardhu, and Tegra114 Dalmore platforms. All works well. Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]Lucas Stach2013-03-14-19/+0
| | | | | | | | | | The ehci_hcd entry points were just calling into the Tegra USB functions. Now that they are in the same file we can just move over the implementation. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: usb: move implementation into right directoryLucas Stach2013-03-14-0/+268
This moves the Tegra USB implementation into the drivers/usb/host directory. Note that this merges the old /arch/arm/cpu/armv7/tegra20/usb.c file into ehci-tegra.c. No code changes, just moving stuff around. v2: While at it also move some defines and the usb.h header file to make usb driver usable for Tegra30. NOTE: A lot more work is required to properly init the PHYs and PLL_U on Tegra30, this is just to make porting easier and it does no harm here. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>