summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-mx6
Commit message (Collapse)AuthorAgeLines
* i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_IDEric Nelson2013-09-27-1/+2
| | | | | | | | This patch adds the pad to i.MX6DQ and changes the i.MX6DLS declaration to match the Linux kernel declaration. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
* i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10Eric Nelson2013-09-20-2/+2
| | | | | | | This patch fixes a regression introduced by commit 87d720e0. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* mx6slevk: Add Ethernet supportFabio Estevam2013-09-20-0/+18
| | | | | | | | mx6slevk has a SMSC8720 connected in RMII mode. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* ARM: arch-mx6: fix PLL2_PFD2_FREQMarkus Niebel2013-09-20-1/+1
| | | | | | | | according to the manual frequency of PLL2 PFD2 is 396.000.000 instead of 400.000.000 Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Acked-by: Stefano Babic <sbabic@denx.de>
* i.MX6: Correct ANATOP_PFD (Phase Fractional Divider) register declarationsEric Nelson2013-08-31-23/+6
| | | | | | | | | | | | | Some _CLKGATE_MASK and _FRAC_MASK macros were wrong for PFD_480 and the PFD_528 macros were missing. Fortunately, the incorrect macros weren't being used. Since both the PFD_480 and PFD_528 registers have the same structure, and the fields are identical for [0..3] in bytes [0..3], so a single set of macros will suffice. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6: Add convenience macros cpu_type(rev) and is_cpu_type(cpu)Eric Nelson2013-08-31-0/+7
| | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx: add status reporting for HAB statusStefano Babic2013-08-31-1/+74
| | | | | | | | | | | | | Add functions to report the HAB (High Assurance Boot) status of e.g. i.MX6 CPUs. This is taken from git://git.freescale.com/imx/uboot-imx.git branch imx_v2009.08_3.0.35_4.0.0 cpu/arm_cortexa8/mx6/generic.c include/asm-arm/arch-mx6/mx6_secure.h Signed-off-by: Stefano Babic <sbabic@denx.de>
* Merge git://git.denx.de/u-boot-armStefano Babic2013-07-31-188/+14
|\ | | | | | | | | | | | | | | | | Conflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.h Signed-off-by: Stefano Babic <sbabic@denx.de>
| * Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-188/+14
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* | imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitorsRobert Winkler2013-07-27-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A little background is probably appropriate for this patch. Since "the beginning" of usage of the SABRE Lite and Nitrogen6x boards, DVI detection has been somewhat broken. Some (most) DVI monitors don't produce the "HPD" bit in the PHY_STAT0 register, but do show proper toggling of the RX_SENSE0..3 bits. Creating a new the bit-mask to include all five bits and modifying the 'hdmidet' command and internal detection routines allows these monitors to function properly in U-Boot. A related patch to our kernels allows things to work under Linux: https://github.com/boundarydevices/linux-imx6/commit/7d8752905c118af9063738a533227de0b2f6ecd4 Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx6: Factor out common HDMI setup codePardeep Kumar Singla2013-07-27-1/+6
|/ | | | | | | Instead of duplicating HDMI setup code for every mx6 board, factor out the common code Signed-off-by: Pardeep Kumar Singla <b45784@freescale.com> Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
* imx: Complete the pin definitions for the i.MX6DL / i.MX6SoloPierre Aubert2013-06-26-22/+1569
| | | | | Signed-off-by: Pierre Aubert <p.aubert@staubli.com> CC: Stefano Babic <sbabic@denx.de>
* imx6: fix GPR2 wrong definitionPierre Aubert2013-06-26-1/+1
| | | | | | Signed-off-by: Pierre Aubert <p.aubert@staubli.com> CC: Stefano Babic <sbabic@denx.de> Acked-by: Dirk Behme <dirk.behme@gmail.com>
* Add mxc_ocotp driverBenoît Thébaudeau2013-04-28-0/+1
| | | | | | Add an mxc_ocotp driver for i.MX6. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: Add useful fuse definitionsBenoît Thébaudeau2013-04-28-1/+12
| | | | | | Define the UID (SoC unique ID) fuses, and the fuses available for the user. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: Homogenize and fix fuse register definitionsBenoît Thébaudeau2013-04-28-12/+7
| | | | | | | | | | | | | | | | | | IIM: - Homogenize prg_p naming (the reference manuals are not always self-consistent for that). - Add missing SCSx and bank registers. - Fix the number of banks on i.MX53. OCOTP: - Rename iim to ocotp in order to avoid confusion. - Rename fuse_data to read_fuse_data, and sticky to sw_sticky, according to the reference manual. - Merge the existing spinoff gp1 fuse definition on i.MX6. - Fix the number of banks on i.MX6. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Acked-by: Stefano Babic <sbabic@denx.de>
* wandboard: Add support for Carrier Board MicroSD cardOtavio Salvador2013-04-25-0/+7
| | | | | | | | Allow use of the carrier board MicroSD card available in the Wandboard; this allow for loading alternative system from the other card for testing or upgrade proposes. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* wandboard: Add card detection for SOM MicroSD cardOtavio Salvador2013-04-25-0/+1
| | | | | | | | This add support to identify if the card is connected or not; so it does not try to communicate with the controller if no card is available. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* nitrogen6x: Setup CCM_CCOSR registerFabio Estevam2013-04-25-0/+1
| | | | | | | | | | | | CKO1 drives sgtl5000 codec clock on nitrogen boards and wandboard. Doing this setup in the bootloader will allow us to remove a lot of code in arch/arm/mach-imx/mach-imx6q.c from the mainline kernel. Also, according to Eric Nelson: "enabling the clock <in the bootloader> will remove squeal after an ungraceful reboot (watchdog) if hooked up to speakers." Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* arm: imx: Codingstyle enhancement of include/asm/arch-mx6/crm_regs.hStefan Roese2013-04-25-86/+86
| | | | | | | | | Add spaces before and after "<<". Please note that I intentionally didn't wrap the > 80 lines for the sake of better readability. Signed-off-by: Stefan Roese <sr@denx.de>
* imx: Add titanium board support (i.MX6 based)Stefan Roese2013-04-22-2/+5
| | | | | | | | | | Titanium is a i.MX6 based board from ProjectionDesign / Barco. This patch adds support for this board with the newly introduced NAND support for i.MX6. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* dma: Add i.MX6 support to drivers/dma/apbh_dma.cStefan Roese2013-04-22-0/+5
| | | | | | | | | This will be used by the i.MX6 NAND support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* imx: Move some i.MX common functions into the imx-common directoryStefan Roese2013-04-22-0/+10
| | | | | | | | | | | | | | | | | | This patch moves the following functions into the imx-common directory: - mxs_wait_mask_set() - mxs_wait_mask_clr() - mxs_reset_block() These are currently used by i.MX28. But the upcoming GPMI NAND port for i.MX6 will also use these functions. So lets move them to a common location to re-use them. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: Add solo-lite variant supportFabio Estevam2013-04-22-1/+96
| | | | | | | | | mx6 solo-lite is another member of the mx6 series. For more information about mx6 solo-lite, please visit: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6SL&nodeId=018rH3ZrDRB24A Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* iomux-v3: Place pad control definitions into common fileFabio Estevam2013-04-22-54/+0
| | | | | | | Instead of having the same PAD control definition in each MX6 variant pin file, place it into a common location. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* spi: mxc_spi: Set master mode for all channelsFabio Estevam2013-04-13-0/+1
| | | | | | | | | | | | | | The glitch in the SPI clock line, which commit 3cea335c34 (spi: mxc_spi: Fix spi clock glitch durant reset) solved, is back now and itwas re-introduced by commit d36b39bf0d (spi: mxc_spi: Fix ECSPI reset handling). Actually the glitch is happening due to always toggling between slave mode and master mode by configuring the CHANNEL_MODE bits in this reset function. Since the spi driver only supports master mode, set the mode for all channels always to master mode in order to have a stable, "glitch-free" SPI clock line. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* Add initial support for Wandboard dual lite and solo.Fabio Estevam2013-03-20-0/+3
| | | | | | | | | Wandboard is a development board that has two variants: one version based on mx6 dual lite and another one based on mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: Provide a structure for accessing HDMI registersFabio Estevam2013-03-07-536/+547
| | | | | | | | Provide a structure for accessing HDMI registers, so that we can use proper read/write accessors. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6: Add DDR controller registersEric Nelson2013-03-07-0/+225
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIOEric Nelson2013-03-07-0/+3
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6: crm_regs: define IOMUXC_GPR4/6/7Eric Nelson2013-03-07-0/+5
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6: crm_regs: define CCM_CCGRx for use in board config filesEric Nelson2013-03-07-0/+12
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6: consolidate pad names for multi-CPU boardsEric Nelson2013-03-07-1766/+1797
| | | | | | | | | | | Rename all i.MX6 pad declarations to MX6_PAD_x, so a board may support either i.MX6Quad/Dual (MX6Q) or i.MX6Dual-Lite/Solo (MX6DL) by including the proper header. Boards mx6qarm2, mx6qsabreauto, mx6qsabrelite, and mx6qsabresd only support MX6Q, so they include mx6q_pins.h. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* mx6: Disable Power Down Bit of watchdogFabio Estevam2013-02-12-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a mx6qsabresd revision C board with rev1.2 mx6q, the system gets resetted and it is not able to reach the Linux prompt. Comparing the watchdog behaviour on a revB versus revC board: - On a mx6qsabresd revB: U-Boot > reset resetting ... U-Boot 2013.01-10524-g432a3aa-dirty (Feb 07 2013 - 13:34:46) CPU: Freescale i.MX6Q rev1.1 at 792 MHz Reset cause: WDOG ... - On a mx6qsabresd revC: U-Boot > reset resetting ... U-Boot 2013.01-10524-g432a3aa-dirty (Feb 07 2013 - 13:34:46) CPU: Freescale i.MX6Q rev1.1 at 792 MHz Reset cause: POR So due to revC POR/watchdog circuitry whenever a watchdog occurs, it causes a POR. Clearing the PDE - Power Down Enable bit of WMCR registers fixes the problem and is also safe for all mx6 boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* arch-mx6: add mx6dl_pins.hTroy Kisky2012-11-10-0/+149
| | | | | | | Only the values used in the sabrelite board are added currently. Add more as other boards use them. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* imx-common: cpu: add imx_ddr_sizeTroy Kisky2012-11-10-0/+1
| | | | | | | | | | Read memory setup registers to determine size of available ram. This routine works for mx53/mx6x I need this because when mx6solo called get_ram_size with a too large maximum size, the system hanged. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololiteTroy Kisky2012-11-10-1/+10
| | | | | | | | | | Previously, the same value was returned for both mx6dl and mx6solo. Check number of processors to differeniate. Also, a freescale patch says that sololite has its cpu/rev stored at 0x280 instead of 0x260. I don't have a sololite to verify. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* i.MX6: add HDMI transmitter register declarations from kernel WIP.Eric Nelson2012-10-16-0/+1053
| | | | | | | | Original source from Pengutronix HDMI driver work: http://git.pengutronix.de/?p=imx/linux-2.6.git;a=commitdiff;h=72c31cd67ac880bd90785af86f8e46f8ea7b3bb0 Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6: set drive strength for parallel RGB padsEric Nelson2012-10-16-29/+29
| | | | | | Default drive strength is disabled and won't function. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* mx6qsabreauto: Pass the board revision to the kernelFabio Estevam2012-10-16-0/+6
| | | | | | | | | | | The kernel from Freescale expects that the bootloader passes the board revision. Read the board revision and pass it via get_board_rev(). Without passing the board revision the kernel does not operate properly as the initialization of peripherals are different in revA versus revB boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx5/6: Define default SoC input clock frequenciesBenoît Thébaudeau2012-10-15-0/+14
| | | | | | | | | | | Define default SoC input clock frequencies for i.MX5/6 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Jason Liu <r64343@freescale.com> Cc: Matt Sealey <matt@genesi-usa.com> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* imx: Use MXC_I2C_CLK in imx i2c driverMatthias Weisser2012-10-15-0/+1
| | | | | | | | i2c didn't work on imx25 due to missing MXC_IPG_PERCLK. Now using MXC_I2C_CLK on all imx systems using i2c. Signed-off-by: Matthias Weisser <weisserm@arcor.de> Acked-by: Stefano Babic <sbabic@denx.de>
* i.MX6: get rid of redundant struct src_regs (dupe of struct src)Eric Nelson2012-10-15-21/+0
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfieldsEric Nelson2012-10-15-0/+73
| | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* i.MX6: Add ANATOP_PFD_480 bitfield constantsEric Nelson2012-10-15-0/+24
| | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* i.MX6: define IOMUX_GPR3 register bitfieldsEric Nelson2012-10-15-0/+48
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6: define bitfields for CHSCCDR registerEric Nelson2012-10-15-0/+4
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6: change register name for CCM_CHSCCDR to match ref. manualEric Nelson2012-10-15-1/+1
| | | | | | | Register CCM_CHSCCDR (offset 0x34 in CCM) is named CCM_CHSCCDR in reference manual, but was named chscdr in struct mxc_ccm_reg. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fieldsEric Nelson2012-10-15-179/+179
| | | | | | | | | | | | | Add meaningful constants for each clock channels and use them for enabling and disabling i.MX6 clocks. Includes an update to enable/disable the IPU1 clock in drivers/video/ipu_common to remove IMX5x register access when used on i.MX6 as discussed in V1: http://patchwork.ozlabs.org/patch/185129/ Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* MX6: drop binary constants from iomux headerStefano Babic2012-09-17-62/+62
| | | | | | | | | | | | | | | | Constants set with binary value (0b...) are not compiled from old toolchain when used by the clrsetbits_le32 macro. Replaces them with the corresponding hex value. The error reported (for example with the mx6qsabrelite board) is something like: mx6qsabrelite.c:369:1: error: invalid suffix "b101" on integer constant mx6qsabrelite.c:369:1: error: invalid suffix "b10010" on integer constant mx6qsabrelite.c:369:1: error: invalid suffix "b0000" on integer constant mx6qsabrelite.c:369:1: error: invalid suffix "b10001" on integer constant Signed-off-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-11-01 08:21:21 +0000