summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-mx6
Commit message (Collapse)AuthorAgeLines
* pci: pcie_imx: Fix hang on mx6qpFabio Estevam2015-10-15-0/+2
| | | | | | | | | | | PCI driver currently hangs on mx6qp. Toggle the reset bit with the appropriate timings to fix the issue. Based on the FSL kernel driver implementation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* arm: imx: imx-common: init: move arch init common setupAdrian Alonso2015-09-13-0/+4
| | | | | | | | Move common imx6 arch init setup, init.c can be extended and reused to support imx7 SoC keeping init arch common code. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* mxc: ocotp fix hole in shadow registersPeng Fan2015-09-02-1/+2
| | | | | | | | | | | | | | | | | | | | | There is a hole in shadow registers address map of size 0x100 between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX and iMX6UL. Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses, we should account for this hole in address space. Similar hole exists between bank 14 and bank 15 of size 0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX. Note: iMX6SL has only 0-7 banks and there is no hole. Note: iMX6UL doesn't have this one. When reading, we use register offset, so need to account for holes to get the correct address. When writing, we use bank/word index, there is no need to account for holes, always use bank/word index from fuse map. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* imx: mx6: ddr: add LPDDR2 supportPeng Fan2015-09-02-0/+15
| | | | | | | | | | | | | | Add LPDDR2 support: 1. Implement a function mx6_lpddr2_cfg to initialize MMDC for LPDDR2. 2. Introduce a structure mx6_lpddr2_cfg, most entrys are same to mx6_ddr3_cfg, but still keep it a single one for easy to choose parameters for LPDDR2. 3. If ddr_type is LPDDR2, use mx6_lpddr2_cfg to init MMDC. 4. Update comments. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
* imx: mx6: ddr init MMDC according to ddr_typePeng Fan2015-09-02-1/+1
| | | | | | | | | | | | | | | | | To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper. The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg when ddr_type is for DDR3. Later we can use ddr_type to initialize MMDC for LPDDR2. Initialize ddr_type for different boards which enable SPL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefan Roese <sr@denx.de>
* imx: mx6: ddr add an entry ddr_type for mx6_ddr_sysinfoPeng Fan2015-09-02-0/+6
| | | | | | | | | | | Add ddr_type entry for mx6_ddr_sysinfo. It will be used for differenrate DDR3 and LPDDR2. Introduce an enum type for ddr_type. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
* imx: mx6: ddr add mpzqlp2ctl entryPeng Fan2015-09-02-0/+2
| | | | | | | | | Add mpzqlp2ctl entry for mx6_mmdc_calibration. MMDC_MPZQLP2CTL register is for init tZQINIT, tZQCL, tZQCS for LPDDR2 chips. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
* imx: mx6: ddr add dram io configuration and header file for i.MX6SLPeng Fan2015-09-02-0/+95
| | | | | | | | | Define two structure mx6sl_iomux_ddr_regs and mx6sl_iomux_grp_regs. Add a new function mx6sl_dram_iocfg to configure dram io. Add header file to define macros for register address. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6: ddr add more register entry for mmdc_p_regsPeng Fan2015-09-02-9/+56
| | | | | | | | | Add more register entry for MMDC structure. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: clock support enet2 anatop clock supportPeng Fan2015-09-02-1/+7
| | | | | | | | | | | | | | | | To i.MX6SX/UL, two ethernet interfaces are supported. Add ENET2 clock support: 1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed. To value 1, only i.MX6SX/UL can pass the check. 2. Modify board code who use this api to follow new api prototype. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Heiko Schocher <hs@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nikolaos Pasaloukos <Nikolaos.Pasaloukos@imgtec.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
* imx-common: consolidate macros and prototypes into sys_proto.hPeng Fan2015-09-02-44/+1
| | | | | | | | | | | | | | | | | Move most macro definitions and prototypes into "arch/arm/include/asm/imx-common/sys_proto.h" to avoid duplicated function prototypes and marco definitions for different i.MX SoCs. This patch do not remove the sys_proto.h for different i.MX SoCs, because we need to modify lots of driver code and others. This patch remove duplicated macros and prototypes and incude "sys_proto.h" of imx-common for each sys_proto.h of different i.MX platforms. Then later we should avoid add stuff in sys_proto.h of each platform, and modify driver to include common sys_proto.h. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx:mx6ul add dram spl configuration and header filePeng Fan2015-08-02-0/+90
| | | | | | | | | | | | 1. Define two structures mx6ul_iomux_ddr_regs and mx6ul_iomux_grp_regs. 2. Add a new function mx6ul_dram_iocfg to configure dram io. 3. Refactor MMDC1 macro, discard "#ifdef CONFIG_MX6SX". Since only mmdc0 channel exists on i.MX6SX/UL, redefine MMDC1 macro support runtime check, but not hardcoding #ifdef macros. 4. Introduce mx6ul-ddr.h, which includes the register address for DRAM IO configuration. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* imx:mx6ul add clock supportPeng Fan2015-08-02-31/+67
| | | | | | | | | | | | | | | 1. Add enet, uart, i2c, ipg clock support for i.MX6UL. 2. Correct get_periph_clk, it should account for MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK. 3. Refactor get_mmdc_ch0_clk to make all i.MX6 share one function, but not use 'ifdef'. 4. Use CONFIG_FSL_QSPI for enable_qspi_clk, but not #ifdef CONFIG_MX6SX. 5. Use CONFIG_PCIE_IMX for pcie clock settings, use CONFIG_CMD_SATA for sata clock settings. In this way, we not need "#if defined(CONFIG_MX6Q) || defined....", only need one CONFIG_PCIE_IMX in header file. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6ULPeng Fan2015-08-02-0/+4
| | | | | | | Since i.MX6UL's cache line size is 64bytes, need to define the macro CONFIG_SYS_CACHELINE_SIZE to 64 for i.MX6UL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* imx: mx6ul: Update imx registers head filePeng Fan2015-08-02-25/+35
| | | | | | | | | | | | 1. Update imx register base address for i.MX6UL. 2. Remove duplicated MXS_APBH/GPMI/BCH_BASE. 3. Remove #ifdef for register addresses that equal to "AIPS2_OFF_BASE_ADDR + 0x34000" for different chips. 4. According fuse map, complete fuse_bank4_regs. 5. Move AIPS3_ARB_BASE_ADDR and AIPS3_ARB_END_ADDR out of #ifdef CONFIG_MX6SX, because we can use runtime check Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* imx: mx6ul: Add pins IOMUX head filePeng Fan2015-08-02-0/+1067
| | | | | | | Add i.MX6UL pins IOMUX file which defines the IOMUX settings for choose. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* imx: mx6: ccm: Change the clock settings for i.MX6QPPeng Fan2015-08-02-23/+25
| | | | | | | | | | | | Since i.MX6QP changes some CCM registers, so modify the clocks settings to follow the hardware changes. In c files, use runtime check and discard #ifdef. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx: add cpu type for i.MX6QP/DPPeng Fan2015-08-02-3/+1
| | | | | | | | | | | Add cpu type for i.MX6QP/DP. This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP and MXC_CPU_MX6DP, we should use: (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)). Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* iMX: adding parsing to hab_status commandUlises Cardenas2015-07-10-12/+73
| | | | | | | | hab_status command returns a memory dump of the hab event log. But the raw data is not human-readable. Parsing such data into readable event will help to minimize debbuging time. Signed-off-by: Ulises Cardenas <Ulises.Cardenas@freescale.com>
* imx: mx6 add i2c4 clock support for i.MX6SXPeng Fan2015-07-10-3/+2
| | | | | | | | | | | Add I2C4 clock support for i.MX6SX. Since we use runtime check, but not macro, we need to remove `#ifdef ..` in crm_regs.h, or gcc will fail to compile the code succesfully. Making the macros only for i.MX6SX open to other i.MX6x maybe not a good choice, but we have runtime check. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* imx: mx6 remove duplicated enable_cspi_clockPeng Fan2015-07-10-1/+0
| | | | | | | | | | enable_spi_clock does the same thing with enable_cspi_clock, so remove enable_cspi_clock. Remove enable_cspi_clock prototype in header file convert cm_fx6/spl.c to use enable_spi_clk Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx: mx6 introuduce macro is_mx6dqpPeng Fan2015-06-27-0/+5
| | | | | | | | | | Add a new revision CHIP_REV_2_0. Introudce macro is_mx6dqp, dqp means Dual/Quad Plus. Since Dual/Quad Plus use same cpu type with Dual/Quad, but different revision(Major Lower), we use this macro for Dual/Quad Plus. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* imx: mx6 correct is_soc_rev usagePeng Fan2015-06-27-2/+2
| | | | | | | | is_soc_rev should return a bool value, so use "==", but not "-", change (is_soc_rev(CHIP_REV_1_0) > 0) to (soc_rev() > CHIP_REV_1_0). This patch also add space between "&" for cpu_type(rev) macro. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* arm, imx6, i2c: add I2C4 for MX6DLHeiko Schocher2015-05-26-0/+3
| | | | | | add I2C4 modul for MX6DL based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
* imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTPTim Harvey2015-05-19-0/+1
| | | | | | | | | | | | | | | The MX6 has a temperature grade defined by OCOTP_MEM0[7:6] which is at 0x480 in the Fusemap Description Table in the reference manual. Return this value as well as min/max temperature based on the value. Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the their Fusemap Description Table however Freescale has confirmed that these eFUSE bits match the description within the IMX6DQRM and that they will be added to the next revision of the respective reference manuals. This has been tested with IMX6 Automative and Industrial parts. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed grade from OTPTim Harvey2015-05-19-0/+1
| | | | | | | | | | | | | | | The IMX6 has four different speed grades determined by eFUSE SPEED_GRADING indicated by OCOTP_CFG3[17:16] which is at 0x440 in the Fusemap Description Table. Return this frequency so that it can be used elsewhere. Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the their Fusemap Description Table however Freescale has confirmed that these eFUSE bits match the description within the IMX6DQRM and that they will be added to the next revision of the respective reference manuals. These have been tested with IMX6 Quad/Solo/Dual-light 800Mhz and 1GHz grades. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* mx6: add OTP bank1 registersTim Harvey2015-05-19-0/+19
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: mx6sx enable SION for i2c pin muxPeng Fan2015-05-19-20/+20
| | | | | | | | | | | | Enable IOMUX_CONFIG_SION for all I2C pin mux settings, otherwise we will get erros when doing i2c operations. error log like the following: " wait_for_sr_state: failed sr=81 cr=a0 state=2020 i2c_init_transfer: failed for chip 0xb retry=1 " Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* arm: mx6: ddr: add pd_fast_exit flag to system informationTim Harvey2015-04-22-0/+1
| | | | | | | | | | | DDR3 has a special Precharge power-down mode: fast-exit vs slow-exit. In slow-exit mode the DLL is off but in some quiescent state that makes it easy to turn on again in tXPDLL cycles (about 10tCK) vs the full tDLLK (512tCK). In fast-exist mode the DLL is maintained such that it is ready again in about 3tCK. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: Added DEK blob generator commandRaul Cardenas2015-03-02-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale's SEC block has built-in Data Encryption Key(DEK) Blob Protocol which provides a method for protecting a DEK for non-secure memory storage. SEC block protects data in a data structure called a Secret Key Blob, which provides both confidentiality and integrity protection. Every time the blob encapsulation is executed, a AES-256 key is randomly generated to encrypt the DEK. This key is encrypted with the OTP Secret key from SoC. The resulting blob consists of the encrypted AES-256 key, the encrypted DEK, and a 16-bit MAC. During decapsulation, the reverse process is performed to get back the original DEK. A caveat to the blob decapsulation process, is that the DEK is decrypted in secure-memory and can only be read by FSL SEC HW. The DEK is used to decrypt data during encrypted boot. Commands added -------------- dek_blob - encapsulating DEK as a cryptgraphic blob Commands Syntax --------------- dek_blob src dst len Encapsulate and create blob of a len-bits DEK at address src and store the result at address dst. Signed-off-by: Raul Cardenas <Ulises.Cardenas@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Ulises Cardenas <ulises.cardenas@freescale.com> Signed-off-by: Ulises Cardenas-B45798 <Ulises.Cardenas@freescale.com>
* imx: mx6sl: Extend USDHC SD2 pins to support 8-wire useOtavio Salvador2015-02-23-0/+5
| | | | | | This adds the DATA[4-7] and RST pin definitions. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx:mx6sl add I2c pad settingsPeng Fan2015-02-23-0/+5
| | | | | | A few pad settings are I2C1 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ARM: imx6: disable bandgap self-bias after bootPeng Fan2015-02-17-0/+2
| | | | | | | | | | | The self-bias circuit is used by the bandgap during startup. Once the bandgap has stabilized, the self-bias circuit should be disabled for best noise performance of analog blocks. Also this bit should be disabled before the chip enters STOP mode or when ever the regular bandgap is disabled. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com>
* imx: mx6: Fixed AIPS3 base address issueYe.Li2015-02-10-2/+2
| | | | | | | | | Should use AIPS3 configuration address 0x0227C000 to set AIPS3, not the AIPS3 base address. Additional, replace AIPS1_BASE_ADDR to AIPS3_ARB_BASE_ADDR to align with AIPS1 and AIPS2, and resolve the AIPS3_ARB_BASE_ADDR undefine problem. Signed-off-by: Ye.Li <B37916@freescale.com>
* imx:mx6 update fuse_bank0_regsPeng Fan2015-02-10-4/+8
| | | | | | Update fuse_bank0_regs structure according reference mannual. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* imx:mx6sx add dram io configure for mx6sxPeng Fan2015-01-22-0/+46
| | | | | | | | | | | Define two structure mx6sx_iomux_ddr_regs and mx6sx_iomux_grp_regs. Add a new function mx6sx_dram_iocfg to configure dram io. Since mx6sx only have one channel mmdc0, define a new empty macro MMDC1 to replace mmdc1->entry=value for mx6sx. And to other mx6 soc, MMDC1 effects as "mmdc1->entry=value". Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* arm:mx6sx add QSPI supportPeng Fan2014-12-31-6/+7
| | | | | | | Add QSPI support for mx6solox. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-12-11-0/+5
|\ | | | | | | | | | | | | Conflicts: board/freescale/mx6sxsabresd/mx6sxsabresd.c Signed-off-by: Tom Rini <trini@ti.com>
| * imx:mx6slevk add board level support for usbPeng Fan2014-11-14-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode There are two usb port on mx6slevk board: 1. otg port 2. host port The following are the connection between usb controller and board usb interface, host port has not ID pin set: otg1 core <---> board otg port otg2 core <---> board host port In order to make host port work, board_usb_phy_mode return USB_INIT_HOST to let host port work in host mode. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye Li <B37916@freescale.com>
* | arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)Stefan Roese2014-12-01-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | As checkpatch complaines about these camel-case defines, lets change them to only use upper-case characters. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Heiko Schocher <hs@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Jon Nettleton <jon.nettleton@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
* | arm: mx6: introduce disable_sata_clockNikita Kiryanov2014-11-24-0/+1
| | | | | | | | | | | | | | Implement disable_sata_clock for mx6 SoCs. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de>
* | mx6: clock: Add thermal clock enable functionNitin Garg2014-11-21-0/+1
| | | | | | | | | | | | | | | | Add api to check and enable pll3 as required for thermal sensor driver. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* | mx6: add weim registersFabio Estevam2014-11-20-0/+37
| | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | imx: consolidate set_chipselect_size functionFabio Estevam2014-11-20-0/+1
|/ | | | | | | | | | Move MX5 specific set_chipselect_size function into generic i.MX part, such that MX6 based boards are able to use this function as well. While doing this the iomuxc gpr member needed to be consolidated between MX5 and MX6. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx: mx6sl: Add IOMUX setting for USDHC1-3Ye.Li2014-11-03-0/+19
| | | | | | Set the USDHC1-3 IOMUX settings which are used for mx6slevk board. Signed-off-by: Ye.Li <B37916@freescale.com>
* imx: mx6sl: Add perclk_clk_sel bit define in CCMYe.Li2014-11-03-0/+2
| | | | | | | The MX6SL has the perclk_clk_sel to select the perclk source. Add its define in CCM Signed-off-by: Ye.Li <B37916@freescale.com>
* arm: arch-mx6: typo fixes in crm_regs.hSoeren Moch2014-10-30-4/+4
| | | | | | fix typos in video pll related register names and bit defines Signed-off-by: Soeren Moch <smoch@web.de>
* arm: imx6: fix typos in CCM_ANALOG_PLL_VIDEO_DENOM register nameAnatolij Gustschin2014-10-30-1/+1
| | | | | | Fix name for Video PLL denominator register. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* imx6sx: Fix i.MX6SX HAB api function table offsetNitin Garg2014-10-01-5/+11
| | | | | | | | | i.MX6SX ROM implements unified table sections. The HAB function table is at offset 0x100. Update the HAB function pointers accordingly. Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
* usb: ehci-mx6: Rename the USB register base addressYe.Li2014-09-29-7/+2
| | | | | | | | | | | | The mx6sl/mx6sx has 2 OTG and 1 host. So they have name "USBO2H_USB_BASE_ADDR" in imx-regs.h. The driver hard codes the USB base address name to "USBOH3", which causes the driver failed to build for mx6sl/mx6sx. This patch uniform the address name to "USB_BASE_ADDR" for all mx6 series. Signed-off-by: Ye.Li <B37916@freescale.com>
generated by cgit v1.1 at 2024-11-14 11:23:41 +0000