summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-mx6
Commit message (Expand)AuthorAgeLines
...
* i.MX6: set drive strength for parallel RGB padsEric Nelson2012-10-16-29/+29
* mx6qsabreauto: Pass the board revision to the kernelFabio Estevam2012-10-16-0/+6
* mx5/6: Define default SoC input clock frequenciesBenoît Thébaudeau2012-10-15-0/+14
* imx: Use MXC_I2C_CLK in imx i2c driverMatthias Weisser2012-10-15-0/+1
* i.MX6: get rid of redundant struct src_regs (dupe of struct src)Eric Nelson2012-10-15-21/+0
* i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfieldsEric Nelson2012-10-15-0/+73
* i.MX6: Add ANATOP_PFD_480 bitfield constantsEric Nelson2012-10-15-0/+24
* i.MX6: define IOMUX_GPR3 register bitfieldsEric Nelson2012-10-15-0/+48
* i.MX6: define bitfields for CHSCCDR registerEric Nelson2012-10-15-0/+4
* i.MX6: change register name for CCM_CHSCCDR to match ref. manualEric Nelson2012-10-15-1/+1
* i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fieldsEric Nelson2012-10-15-179/+179
* MX6: drop binary constants from iomux headerStefano Babic2012-09-17-62/+62
* mxc: Define architecture identifierBenoît Thébaudeau2012-09-01-0/+2
* MX: Set a common gpio.h for all i.MXStefano Babic2012-09-01-8/+1
* imx-common/cmd_bmode.c: add imx bmode (bootmode) commandTroy Kisky2012-09-01-0/+21
* iomux: move IOMUX_GPR13_xxx definesTroy Kisky2012-09-01-0/+129
* imx-common: add i2c.c for bus recovery supportTroy Kisky2012-07-31-0/+1
* i.mx: iomux-v3.h: move to imx-common include directoryTroy Kisky2012-07-31-215/+1
* mx6: Make pad name macro consistent with the datasheetAshok2012-07-20-2/+2
* mx6: Allow mx6 to access the IPUv3 registersFabio Estevam2012-07-10-0/+3
* i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctlyJason Liu2012-07-07-2/+2
* i.MX6: add enable_sata_clock()Eric Nelson2012-05-15-0/+121
* i.MX6: Add ANATOP regulator initDirk Behme2012-05-15-0/+2
* imx-common: Factor out get_ahb_clk()Fabio Estevam2012-05-15-2/+3
* imx: Remove unneeded/repititive definitions from imx headersVikram Narayanan2012-04-16-2/+0
* i.MX6: define CACHELINE_SIZEEric Nelson2012-04-16-0/+2
* mx6: Read silicon revision from registerFabio Estevam2012-03-27-0/+142
* mx6: Remove duplicate definition of ANATOP_BASE_ADDRFabio Estevam2012-03-27-1/+0
* usb/ehci: Add USB support for the MX6QWolfgang Grandegger2012-03-26-0/+4
* net: fec_mxc: add 1000 Mbps selectionTroy Kisky2012-02-27-0/+1
* mx6q: Add support for ECSPI through mxc_spi driverEric Nelson2012-02-27-0/+44
* mx6q: define GPIO macros for translating between ordinals and port:indexEric Nelson2012-02-27-0/+4
* i.mx6: mx6x_pins: Fix uart txd definitionsTroy Kisky2012-02-12-24/+12
* imx: mx6q: add aipstz init for off platform periphJason Liu2012-01-16-0/+11
* i.mx6:imx6q: allign MAC address with burned-in orderingJason Liu2012-01-16-1/+1
* net: imx: Add multi-FEC support for imx_get_mac_from_fuseFabio Estevam2012-01-16-1/+1
* i.mx: add the initial support for freescale i.MX6Q processorJason Liu2011-12-09-0/+3037