summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-mx6
Commit message (Expand)AuthorAgeLines
* Add mxc_ocotp driverBenoît Thébaudeau2013-04-28-0/+1
* imx: Add useful fuse definitionsBenoît Thébaudeau2013-04-28-1/+12
* imx: Homogenize and fix fuse register definitionsBenoît Thébaudeau2013-04-28-12/+7
* wandboard: Add support for Carrier Board MicroSD cardOtavio Salvador2013-04-25-0/+7
* wandboard: Add card detection for SOM MicroSD cardOtavio Salvador2013-04-25-0/+1
* nitrogen6x: Setup CCM_CCOSR registerFabio Estevam2013-04-25-0/+1
* arm: imx: Codingstyle enhancement of include/asm/arch-mx6/crm_regs.hStefan Roese2013-04-25-86/+86
* imx: Add titanium board support (i.MX6 based)Stefan Roese2013-04-22-2/+5
* dma: Add i.MX6 support to drivers/dma/apbh_dma.cStefan Roese2013-04-22-0/+5
* imx: Move some i.MX common functions into the imx-common directoryStefan Roese2013-04-22-0/+10
* mx6: Add solo-lite variant supportFabio Estevam2013-04-22-1/+96
* iomux-v3: Place pad control definitions into common fileFabio Estevam2013-04-22-54/+0
* spi: mxc_spi: Set master mode for all channelsFabio Estevam2013-04-13-0/+1
* Add initial support for Wandboard dual lite and solo.Fabio Estevam2013-03-20-0/+3
* mx6: Provide a structure for accessing HDMI registersFabio Estevam2013-03-07-536/+547
* i.MX6: Add DDR controller registersEric Nelson2013-03-07-0/+225
* i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIOEric Nelson2013-03-07-0/+3
* i.MX6: crm_regs: define IOMUXC_GPR4/6/7Eric Nelson2013-03-07-0/+5
* i.MX6: crm_regs: define CCM_CCGRx for use in board config filesEric Nelson2013-03-07-0/+12
* i.MX6: consolidate pad names for multi-CPU boardsEric Nelson2013-03-07-1766/+1797
* mx6: Disable Power Down Bit of watchdogFabio Estevam2013-02-12-0/+8
* arch-mx6: add mx6dl_pins.hTroy Kisky2012-11-10-0/+149
* imx-common: cpu: add imx_ddr_sizeTroy Kisky2012-11-10-0/+1
* mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololiteTroy Kisky2012-11-10-1/+10
* i.MX6: add HDMI transmitter register declarations from kernel WIP.Eric Nelson2012-10-16-0/+1053
* i.MX6: set drive strength for parallel RGB padsEric Nelson2012-10-16-29/+29
* mx6qsabreauto: Pass the board revision to the kernelFabio Estevam2012-10-16-0/+6
* mx5/6: Define default SoC input clock frequenciesBenoît Thébaudeau2012-10-15-0/+14
* imx: Use MXC_I2C_CLK in imx i2c driverMatthias Weisser2012-10-15-0/+1
* i.MX6: get rid of redundant struct src_regs (dupe of struct src)Eric Nelson2012-10-15-21/+0
* i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfieldsEric Nelson2012-10-15-0/+73
* i.MX6: Add ANATOP_PFD_480 bitfield constantsEric Nelson2012-10-15-0/+24
* i.MX6: define IOMUX_GPR3 register bitfieldsEric Nelson2012-10-15-0/+48
* i.MX6: define bitfields for CHSCCDR registerEric Nelson2012-10-15-0/+4
* i.MX6: change register name for CCM_CHSCCDR to match ref. manualEric Nelson2012-10-15-1/+1
* i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fieldsEric Nelson2012-10-15-179/+179
* MX6: drop binary constants from iomux headerStefano Babic2012-09-17-62/+62
* mxc: Define architecture identifierBenoît Thébaudeau2012-09-01-0/+2
* MX: Set a common gpio.h for all i.MXStefano Babic2012-09-01-8/+1
* imx-common/cmd_bmode.c: add imx bmode (bootmode) commandTroy Kisky2012-09-01-0/+21
* iomux: move IOMUX_GPR13_xxx definesTroy Kisky2012-09-01-0/+129
* imx-common: add i2c.c for bus recovery supportTroy Kisky2012-07-31-0/+1
* i.mx: iomux-v3.h: move to imx-common include directoryTroy Kisky2012-07-31-215/+1
* mx6: Make pad name macro consistent with the datasheetAshok2012-07-20-2/+2
* mx6: Allow mx6 to access the IPUv3 registersFabio Estevam2012-07-10-0/+3
* i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctlyJason Liu2012-07-07-2/+2
* i.MX6: add enable_sata_clock()Eric Nelson2012-05-15-0/+121
* i.MX6: Add ANATOP regulator initDirk Behme2012-05-15-0/+2
* imx-common: Factor out get_ahb_clk()Fabio Estevam2012-05-15-2/+3
* imx: Remove unneeded/repititive definitions from imx headersVikram Narayanan2012-04-16-2/+0