| Commit message (Collapse) | Author | Age | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
EPDC board contain a elan touch screen, this screen is a i2c
slave. If this EPDC board connect to i.MX6SL-EVK board, after
uboot boot up, if we do i2c operation, like i2c probe, then
the i2c bus block. This is due to the elan touch screen i2c slave.
This device needs to do some initialization opearation before its
i2c operation, otherwise this i2c device pull down the i2c clk line,
and make the i2c bus hang. This means elan needs a special flow on
i2c before its address is acked, otherwise the i2c bus will be hang.
This patch is a workaround, it add a void function which is defined
as a weak symbol in i2c driver, and it is called before every i2c
operation. In mx6slevk, this function was overwrite to execute elan
initialization. So that, for mx6slevk board, it will initialize
elan before every i2c operation, but for other boards, it just work
as before.
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
(cherry picked from commit 4c587b29c423ce61b2471ed20f31ff533d9d8a39)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
arch/arm/include/asm/arch-mx6/mx6sl_pins.h
board/freescale/mx6slevk/mx6slevk.c
|
| |
|
|
|
|
| |
Update header files in arch/arm/include/asm/arch-mx6/
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add EPDC splash screen feature for MX6SL EVK, and MX6DL SABRESD board.
- Currently, splash screen consists of a simple black border
around a white screen. Done this way to save in memory footprint.
- EPDC splash screen is disabled by default in the config file for MX6DL_SABRESD
and MX6SL_EVK. If left enabled, the U-Boot image will not boot correctly
(hang), since some additional content on the boot device (waveform file) is
required for EPDC splash to work correctly.
Please refer to Linux Reference Manual for how to flash WAVEFORM file.
Signed-off-by: Robby Cai <R63905@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
(cherry picked from commit b8ab9b3eabb94bbbc1eea63e7c0e2a87d2d645f4)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
arch/arm/include/asm/arch-mx6/mx6sl_pins.h
board/freescale/mx6sabresd/mx6sabresd.c
board/freescale/mx6slevk/mx6slevk.c
drivers/video/Makefile
include/configs/mx6sabresd.h
include/configs/mx6slevk.h
include/lcd.h
drivers/video/Makefile
|
| |
|
|
|
|
| |
This adds the DATA[4-7] and RST pin definitions.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
| |
|
|
|
|
| |
A few pad settings are I2C1
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode
There are two usb port on mx6slevk board:
1. otg port
2. host port
The following are the connection between usb controller and board usb
interface, host port has not ID pin set:
otg1 core <---> board otg port
otg2 core <---> board host port
In order to make host port work, board_usb_phy_mode return USB_INIT_HOST
to let host port work in host mode.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <B37916@freescale.com>
|
| |
|
|
|
|
| |
Set the USDHC1-3 IOMUX settings which are used for mx6slevk board.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
| |
|
|
|
|
|
|
|
|
| |
mx6slevk has a m25p32 SPI NOR flash connected to ESCSPI port.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
|
| |
|
|
|
|
|
|
| |
mx6slevk has a SMSC8720 connected in RMII mode.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
| |
|
|
|
|
| |
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
|
|
|
mx6 solo-lite is another member of the mx6 series.
For more information about mx6 solo-lite, please visit:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6SL&nodeId=018rH3ZrDRB24A
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
