| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
EPDC board contain a elan touch screen, this screen is a i2c
slave. If this EPDC board connect to i.MX6SL-EVK board, after
uboot boot up, if we do i2c operation, like i2c probe, then
the i2c bus block. This is due to the elan touch screen i2c slave.
This device needs to do some initialization opearation before its
i2c operation, otherwise this i2c device pull down the i2c clk line,
and make the i2c bus hang. This means elan needs a special flow on
i2c before its address is acked, otherwise the i2c bus will be hang.
This patch is a workaround, it add a void function which is defined
as a weak symbol in i2c driver, and it is called before every i2c
operation. In mx6slevk, this function was overwrite to execute elan
initialization. So that, for mx6slevk board, it will initialize
elan before every i2c operation, but for other boards, it just work
as before.
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes to support SPI NOR flash read, write and erase by using
"sf" command.
In addition, add a new configuration "mx6slevk_spinor" for building
the uboot that can be booted from SPI NOR flash and stored the
environments variables in it.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
Enable the USB EHCI for the imx6slevk board. Add VBUS control
pin settings and related BSP codes.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
- Add i2c0 support for imx6sl evk platform.
- Read pmic device ID and revsion ID.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
imx6 boards (sabresd, sabreauto, arm2 and slevk) have multiple SD/MMC ports to boot.
But current uboot hard code the SD/MMC port for environment variables storage. So
if customer changes a port without modifying the configuration "CONFIG_SYS_MMC_ENV_DEV",
error will issue at saving and loading environment.
Implement a mechanism to detect SD/MMC port from SRC SMBR register, and override the
default "mmc_get_env_devno". The "board_late_mmc_env_init" is used to set "mmcdev"
when booting from SD/MMC port. Finally after booting from SD/MMC, the environment storage
device and "mmcdev" are both set to current SD/MMC port. Customers don't need to re-build
the image if booting from different SD/MMC port.
This patch also adds SD1 and SD3 support to imx6slevk BSP, and adds support for sabreauto
SD1 slot on base board.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
| |
i.MX6sl evk has keyboards on the board, so add mxc_keyb driver to
support key press checking.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add EPDC splash screen feature for MX6SL EVK, and MX6DL SABRESD board.
- Currently, splash screen consists of a simple black border
around a white screen. Done this way to save in memory footprint.
- EPDC splash screen is disabled by default in the config file for MX6DL_SABRESD
and MX6SL_EVK. If left enabled, the U-Boot image will not boot correctly
(hang), since some additional content on the boot device (waveform file) is
required for EPDC splash to work correctly.
Please refer to Linux Reference Manual for how to flash WAVEFORM file.
Signed-off-by: Robby Cai <R63905@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fastboot
Android fastboot leans on the USB gadget driver to communicate with host. Porting
the imx_udc driver from v2009.08 with two changes: adding resource/memory release
APIs and replacing the uncached memory with cache flush&invalidate operations.
Pins and Clocks initialization are added to support boards:
mx6qdlsabresd, mx6qdlsabreauto, mx6slevk
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
mx6slevk has a SMSC8720 connected in RMII mode.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
|
|
|
|
| |
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
|
|
mx6 solo-lite is another member of the mx6 series.
For more information about mx6 solo-lite, please visit:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6SL&nodeId=018rH3ZrDRB24A
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|