summaryrefslogtreecommitdiff
path: root/arch/arm/imx-common
Commit message (Collapse)AuthorAgeLines
* imx: mx7ulp: Add soc level initialization codes and functionsPeng Fan2017-04-05-0/+4
| | | | | | | | | | | | | | | Implement soc level functions to get cpu rev, reset cause, enable cache, etc. We will disable the wdog and init clocks in s_init at very early u-boot phase. Since the we are seeking the way to get chip id for mx7ulp, the get_cpu_rev is hard coded to a fixed value. This may change in future. Reuse some code in imx-common. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* MLK-12495 mx6: Add LDO bypass supportYe Li2017-04-05-0/+3
| | | | | | | | | | | | | | | | Port LDO bypass support from v2015 to support the features: 1. Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz, enable LDO bypass and setup PMIC voltages. LDO bypass is dependent on the flatten device tree file. 2. We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to reboot whole board, so split these code to independent function so that board file can call it freely. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 5b87d04dba66fa45375d59648838ef89f559f75d)
* ENGR00315894-55 iMX6SX: add debug monitor supportYe.Li2017-04-05-0/+20
| | | | | | | | | | | | | | Debug monitor will print out last failed AXI access info when system reboot is caused by AXI access failure, only works when debug monitor is enabled. Enable this module on i.MX6SX. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit df6ac8531d498021ed379c74fc1847bd2cec7179) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 4f4ecdbf6fe2673b8ad117df1a4974bdb7e6aa4a)
* MLK-10496: Check the PL310 version for applying errataNitin Garg2017-04-05-9/+11
| | | | | | | | | | | | Apply errata based on PL310 version instead of compile time. Also set Prefetch offset to 15, since it improves memcpy performance by 35%. Don't enable Incr double Linefill enable since it adversely affects memcpy performance by about 32MB/s and reads by 90MB/s. Tested with 4K to 16MB sized src and dst aligned buffer. Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit 31751fa9cf29ef4056f49fe06a54700a89c9bdc5)
* MLK-10176-6 imx: mx7: Modify GPT timer driver for mx7Peng Fan2017-04-05-2/+8
| | | | | | | | | | | | | Modify the GPT common platform driver for mx7 which only use 24Mhz OSC as clock source. Note: at default, the mx7d will use system counter as timer. The GPT is disabled. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 6e250796d6a07d84093eeae96e5a6e4c593cdb0b) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 708898fe547bd3d56f0abf7e40f1af91cf4271cf)
* ENGR00328312 i2c: imx: Optimize the i2c device recovery solutionFugang Duan2017-04-05-2/+26
| | | | | | | | | | | | | | | | | | | From i2c spec, if device pull down the SDA line that causes i2c bus dead, host can send out 9 clock to let device release SDA. But for some special device like pfuze100, it pull down SDA line and the solution cannot take effort. The patch just add NACK and STOP signal after 8 dummy clock, and pmic can release SDA line after the recovery. Test case catch 375 times of i2c hang, and all are recovered. Signed-off-by: Fugang Duan <B38611@freescale.com> (cherry picked from commit 53118db42d201d36ca9067b4bb0e2702399e100b) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit b8dcb812401026cb2189b24a4f6058830151c85a) (cherry picked from commit c5a44a2a0b2218221cb12645b10f0b34ecc6f79b)
* MLK-12557 mx6ul: Enable syscounter as default timerYe Li2017-04-05-3/+14
| | | | | | | | | Use syscounter for i.MX6UL platform as default timer, not use GPT. Add a CONFIG_GPT_TIMER for selecting GPT. Using CONFIG_SYSCOUNTER_TIMER for selecting system counter. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 1c27c9ecf80b3cc63a7c9751ebfd11755f847b1d)
* ENGR00315894-81 gis: Add gis moduleYe.Li2017-04-05-1/+9
| | | | | | | | | | | Add gis module, current gis is support vadc input. Add power down function to lcdif driver. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793) (cherry picked from commit a31dcdafb0963381e7213c59f79a340ef27ec2e2) (cherry picked from commit 02dfe2e4af5f51d39a51542fb0e81f93faf505bc)
* MLK-12437-2 Video: Update the common board_video_skip to support MXS LCDYe Li2017-04-05-0/+8
| | | | | | | Update the board_video_skip to use CONFIG_VIDEO_MXS for LCD display support. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit d6d0265b09e66c576ab4c01841166415f834a1ff)
* Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigsTom Rini2017-03-09-0/+1
| | | | | | | | | | | | | | | | | | | | | | In some cases this is absolutely required, so select this for some secure features. This also requires migration of RSA_FREESCALE_EXP Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Priyanka Jain <Priyanka.Jain@freescale.com> Cc: Sumit Garg <sumit.garg@nxp.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Feng Li <feng.li_2@nxp.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Mingkai Hu <Mingkai.Hu@freescale.com> Cc: York Sun <york.sun@nxp.com> Cc: Saksham Jain <saksham.jain@nxp.freescale.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* imx_common: check for bmode Serial DownloaderStefan Agner2017-01-27-2/+4
| | | | | | | | | | | | | | | | | Before commit 81c4eccb55cc ("imx: mx6: fix USB bmode to use reserved value") a non-reserved value has been used to trigger Serial Downloader using bmode, which translated to a GPR9 value of 0x10. However, on some boards the non-reserved value lead to unreliable bmode command. With the above mentioned commit, U-boot switched to use [7:4] b0001, which translates to GPR9 0x10 for Serial Downloader mode. Check for the new value and classify it as Serial Downloader mode. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> CC: Stefano Babic <sbabic@denx.de> CC: Tim Harvey <tharvey@gateworks.com> CC: Fabio Estevam <Fabio.Estevam@freescale.com> CC: Eric Nelson <eric.nelson@boundarydevices.com>
* SPL: Adjust more debug prints for ulong entry_pointTom Rini2017-01-11-1/+1
| | | | | | | | With entry_point now being an unsigned long we need to adapt the last two debug prints to use %lX not %X. Fixes: 11e1479b9e67 ("SPL: make struct spl_image 64-bit safe") Signed-off-by: Tom Rini <trini@konsulko.com>
* Makefile: preserve output for images that can contain HAB BlocksSven Ebenfeld2017-01-02-0/+4
| | | | | | | | | | | | | | | | | | | To being able to sign created binaries, we need to know the HAB Blocks for that image. Especially for the imximage type the HAB Blocks are only available during creation of the image. We want to preserve the information until we get to sign the files. In the verbose case we still get them printed out instead of writing to log files. Cc: sbabic@denx.de v2-Changes: - No usage of MKIMAGEOUTPUT_$(@F) macro. - Predefine default value /dev/null in every involved Makefile. Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
* arm: imx: add HAB authentication of image to SPL bootSven Ebenfeld2017-01-02-59/+105
| | | | | | | | | | | | | | | | | | | | | When using HAB as secure boot mechanism on Wandboard, the chain of trust breaks immediately after the SPL. As this is not checking the authenticity of the loaded image before jumping to it. The HAB status output will not be implemented in SPL as it adds a lot of strings that are only required in debug cases. With those it exceeds the maximum size of the available OCRAM (69 KiB). The SPL MISC driver support must be enabled, so that the driver can use OTP fuse to check if HAB is enabled. Cc: sbabic@denx.de v2-Changes: None Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
* arm: imx: remove bmode , hdmidet and dek commands from SPLSven Ebenfeld2017-01-02-0/+2
| | | | | | | | | | | | | | | | | | | These files are blowing up the SPL and should not be required there as the SPL delivers no command console. Because building fails for mx27 and mx31 machines with SPL build, we remove the linker flag for them from the Makefile. Nothing is built for them to be linked in that directory. Cc: sbabic@denx.de v2 Changes: - Remove mx27 and mx31 from Makefile during SPL build as nothing is built for them in that directory. And removing the commands with the libs-y directive lead to linker failures. e.g. "armv5te-ld.bfd: cannot find arch/arm/imx-common/built-in.o: No such file or directory)" Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
* imx-common: cache: configure L2 Cache for i.MX6SLLPeng Fan2016-12-16-8/+9
| | | | | | | | If L2 cache configured as OCRAM, reset it. Switch to use runtime check. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6sll: add iomux settingsPeng Fan2016-12-16-3/+7
| | | | | | | | Add iomux settings for i.MX6 SLL Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye.Li <ye.li@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx-common: timer: add i.MX6SLL supportPeng Fan2016-12-16-3/+7
| | | | | | | Add i.MX6 SLL GPT timer support. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: add i.MX 6SLL CPU typePeng Fan2016-12-16-0/+2
| | | | | | | | Add i.MX6SLL cpu type. MXC_CPU_MX6D is not a real value in chip, so change it to 0x6A. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* Revert "ARM: mx6: add MMC2 boot device detection support in SPL"Breno Lima2016-12-05-5/+1
| | | | | | | | | | | | | | | Commit 54e4fcfa3c749a78 ("ARM: mx6: add MMC2 boot device detection support in SPL") prevents UDOO neo board to boot: Trying to boot from MMC2 port 1 MMC Device 1 not found spl: could not find mmc device. error: -19 SPL: failed to boot from all boot devices This reverts commit 54e4fcfa3c749a789192e83740a53234182f4ca3. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* imx: make ipu's di configurableMax Krummenacher2016-11-29-1/+1
| | | | | | | | | The ipu has two display interfaces. Make the used one a parameter in struct display_info_t instead of using unconditionally DI0. DI0 is the default setting. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Eric Nelson <eric@nelint.com>
* ARM: mx6: add MMC2 boot device detection support in SPLMarcin Niestroj2016-11-29-1/+5
| | | | | | | | | Check BOOT_CFG2[3:4] to determine which SD/MMC port is selected to boot from. If MMC2 is selected return BOOT_DEVICE_MMC2. In all other cases return BOOT_DEVICE_MMC1, as we do not have corresponding macro for MMC3 and MMC4. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
* imx-common: compile plugin codePeng Fan2016-10-24-6/+23
| | | | | | | | | If CONFIG_USE_IMXIMG_PLUGIN is selected, plugin.bin will be generated under board/$(BOARDDIR)/. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* imx-common: introduce USE_IMXIMG_PLUGIN KconfigPeng Fan2016-10-24-0/+7
| | | | | | | | Introduce USE_IMXIMG_PLUGIN Kconfig Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: imx-common: introduce back usec2ticksPeng Fan2016-10-17-0/+16
| | | | | | | | | | | | | | This commit "2bb014820c49a63902103bac710bc86b5772e843" do some clean up to use the code in lib/time.c. But usec2ticks is still being used by security related job ring code. Bring back the function to avoid build break when CONFIG_FSL_CAAM is defined. The computation logic has been changed, using 64-bit variable to ease the process, making it work on older (MX5) platforms. Signed-off-by: Peng Fan <van.freenix@gmail.com> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
* arm: imx-common: add SECURE_BOOT option to KconfigGary Bisson2016-10-17-0/+7
| | | | | | So the option can easily be selected through menuconfig. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
* imx: iomux: fix snvs usage for i.MX6ULLPeng Fan2016-10-04-1/+10
| | | | | | | | | | | | SNVS TAMPER pin and BOOT MODE pins are in SNVS IOMUXC module, not in IOMUXC, so correct the related registers' offset. Use IOMUX_CONFIG_LPSR flag for these pins, so we can differentiate them from iomuxc pins. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: "Benoît Thébaudeau" <benoit.thebaudeau.dev@gmail.com>
* imx: mx6ull: Add AIPS3 initializationPeng Fan2016-10-04-1/+1
| | | | | | | | Since the mx6ull adds the AIPS3, so enable its initialization. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: timer: update gpt driver for i.MX6ULLPeng Fan2016-10-04-3/+4
| | | | | | | | | | The i.MX6ULL's GPT supportting taking OSC as clock source. Add i.MX6ULL support. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: mx6ull: add mx6ull major cpu typePeng Fan2016-10-04-0/+2
| | | | | | | | | Add i.MX6ULL major cpu type. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: iomux-v3: fix pad setup on i.MX6DQP when CONFIG_MX6QDL is definedFilip Brozovic2016-10-04-1/+1
| | | | | | | | The CPU detection macro is_mx6dq returns 0 on an i.MX6DQP, so we need to check for it explicitly in order to correctly initialize the pads when CONFIG_MX6QDL is defined. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
* treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-1/+1
| | | | | | | | | | | | | | Now, include/linux/errno.h is a wrapper of <asm-generic/errno.h>. Replace all include directives for <asm-generic/errno.h> with <linux/errno.h>. <asm-generic/...> is supposed to be included from <asm/...> when arch-headers fall back into generic implementation. Generally, they should not be directly included from .c files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Add drivers/usb/host/xhci-rockchip.c] Signed-off-by: Tom Rini <trini@konsulko.com>
* treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-5/+5
| | | | | | | | | | | Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
* Various, unrelated tree-wide typo fixes.Robert P. J. Day2016-07-16-1/+1
| | | | | | | | | | | | | | | | | | | Fix a number of typos, including: * "compatble" -> "compatible" * "eanbeld" -> "enabled" * "envrionment" -> "environment" * "FTD" -> "FDT" (for "flattened device tree") * "ommitted" -> "omitted" * "overriden" -> "overridden" * "partiton" -> "partition" * "propogate" -> "propagate" * "resourse" -> "resource" * "rest in piece" -> "rest in peace" * "suport" -> "support" * "varible" -> "variable" Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* common: Pass the boot device into spl_boot_mode()Marek Vasut2016-06-26-1/+1
| | | | | | | | | | | | | | | | | | The SPL code already knows which boot device it calls the spl_boot_mode() on, so pass that information into the function. This allows the code of spl_boot_mode() avoid invoking spl_boot_device() again, but it also lets board_boot_order() correctly alter the behavior of the boot process. The later one is important, since in certain cases, it is desired that spl_boot_device() return value be overriden using board_boot_order(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [add newly introduced zynq variant] Signed-aff-by: Andreas Bießmann <andreas@biessmann.org>
* imx-common: timer: support i.MX6DQPlusPeng Fan2016-05-24-1/+1
| | | | | | | | To i.MX6DQPlus, osc can be choosed as the source of gpt, so add i.MX6DQPlus support in gpt_has_clk_source_osc. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
* imx-common: sata: return failure if not i.MX6DQPlusPeng Fan2016-05-24-1/+1
| | | | | | | | The i.MX6DQPlus support sata interface, we should not return failure when CPU is i.MX6DQPlus. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
* imx-common: hab: support i.MX6DQPlusPeng Fan2016-05-24-0/+10
| | | | | | | | | Support i.MX6DQPlus, otherwise wrong hab address will be used for i.MX6QDPlus. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Ulises Cardenas <Ulises.Cardenas@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* imx-common: use simpler runtime cpu dection macrosPeng Fan2016-05-24-48/+20
| | | | | | | | | Use simpler runtime cpu dection macros. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: "Benoît Thébaudeau" <benoit.thebaudeau.dev@gmail.com>
* imx-common: hab: support i.MX6SOLOPeng Fan2016-05-24-5/+10
| | | | | | | | | | | | Add i.MX6SOLO support for hab function. The difference between i.MX6SOLO and i.MX6DL is the number of CPU cores. Besides this, they work the same. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: "Benoît Thébaudeau" <benoit.thebaudeau.dev@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: imx-common: print i.MX 7 SoC names consistentlyStefan Agner2016-05-17-1/+1
| | | | | | | | | According to the product website, the full names are i.MX 7Solo and i.MX 7Dual, whereas the short form is i.MX7S and i.MX7D. Be consistent and print the short form for both supported i.MX 7 SoCs. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* imx6: cache: disable L2 before touching Auxiliary Control RegisterPeng Fan2016-05-06-3/+6
| | | | | | | | | | | | | | | | | | | According PL310 TRM, Auxiliary Control Register " The register must be written to using a secure access, and it can be read using either a secure or a NS access. If you write to this register with a NS access, it results in a write response with a DECERR response, and the register is not updated. Writing to this register with the L2 cache enabled, that is, bit[0] of L2 Control Register set to 1, results in a SLVERR. " So If L2 cache is already enabled by ROM, chaning value of ACR will cause SLVERR and uboot hang. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
* arch/arm/imx-common/Makefile: Update u-boot.uim MKIMAGEFLAGSTom Rini2016-05-02-1/+1
| | | | | | We need to be passing -T firmware here and aren't. Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: mx5: Fix NAND image generationMarek Vasut2016-04-19-1/+1
| | | | | | | | | | | | The echo -ne "\xNN" does not work in certain bourne-compatible shells, like dash. The recommended way of hex->char conversion is using printf(1), but there is a pitfall here. The GNU printf does support "\xNN" format, but according to the opengroup documentation, this is not part of POSIX. The POSIX printf only defines "\NNN" where N is octal. Thus, for the sake of compatibility, we use that. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx7: Distinguish between dual and solo versionsFabio Estevam2016-03-09-0/+2
| | | | | | | | | | Read the number of cores in the fuses to distinguish between the dual and solo versions. Tested on a mx7d sabresd and on a mx7solo warp7. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* imx: imx-common: introduce boot auxiliary corePeng Fan2016-02-21-0/+79
| | | | | | | | | | | To boot a auxiliary core in asymmetric multicore system, introduce the new command "bootaux" to do it. Example of boot auxliary core from 0x70000000 where stores the boot head information that should be parsed by auxiliary core, "bootaux 0x70000000". Introduce Kconfig option IMX_BOOTAUX. Signed-off-by: Ye.Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: imx-common: introduce Resource Domain Controller supportPeng Fan2016-02-21-0/+192
| | | | | | | | | Introduce Resource Domain Controller support for i.MX. Now i.MX6SX and i.MX7D supports this feature to assign masters and peripherals to different domains. Signed-off-by: Ye.Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx_common: check for Serial Downloader in spl_boot_deviceStefano Babic2016-01-03-0/+8
| | | | | | | | | | | | | | | | | | | Check for bmode before reading the boot device to check if a serial downloader is started, and returns UART if the serial downloader is set, letting SPL to wait for an image if CONFIG_SPL_YMODEM_SUPPORT is set. This allows to load again a SPL based board with imx_usb_loader together with a tool such as kermit. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tim Harvey <tharvey@gateworks.com> CC: Fabio Estevam <Fabio.Estevam@freescale.com> CC: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Eric Nelson <eric@nelint.com> Tested-by: Eric Nelson <eric@nelint.com>
* imx: mx7: compile misc.c for mx7Peng Fan2015-11-12-1/+1
| | | | | | | | | | | Compile misc.c for mx7, since we need related function for lcdif and nand. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Sanchayan Maity <maitysanchayan@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* imx: imx-common: power down lcdif before boot osPeng Fan2015-11-12-0/+3
| | | | | | | | | | | | | | Need to call lcdif_power_down to make lcdif in initial state before kernel boot. Similar issue for uboot reset with lcdif enabled, system will hang after serveral times resetting. Need to let lcdif initial state to make all go well. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Fabio Estevam <fabio.estevam@freescale.com>
generated by cgit v1.1 at 2024-11-01 13:40:03 +0000