summaryrefslogtreecommitdiff
path: root/arch/arm/imx-common
Commit message (Collapse)AuthorAgeLines
* MLK-11408-1 imx: mx7d: Add mx7d RDC driver supportYe.Li2015-08-25-0/+1
| | | | | | | Add the peripherals/masters definitions and registers base addresses for mx7d RDC. Enable the RDC driver by setting CONFIG_MXC_RDC. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10808-5 imx: mx6ul: Update soc relevant settingsYe.Li2015-05-05-1/+3
| | | | | | | Remove PCIe, xPU power, PL310 L2 Cache for MX6UL. Update FEC MAC address, WDOG settings, USDHC clock rate. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10808-4 imx: Move system counter driver to imx-commonYe.Li2015-05-04-5/+140
| | | | | | | | | | | | | Since the system counter driver will also be used by mx6ul, move this timer driver to imx-common and rename it as syscounter.c For mx6ul and mx7, configurations are used for choose the GPT timer or system counter timer (default). GPT timer: CONFIG_GPT_TIMER System counter timer: CONFIG_SYSCOUNTER_TIMER Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10808-1 imx: mx6ul: Add i.MX6UL CPU typeYe.Li2015-05-04-1/+3
| | | | | | | | | Add MXC_CPU_MX6UL for i.MX6UL CPU type which is got at runtime. The 0x64 is defined as i.MX6Ul CPU type value in RM, but the value has been occupied by i.MX6D as a dummy CPU type. So we also need change i.MX6D to a invalid value 0x67. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10590: arm :imx7d: correct iomuxc-lpsr daisy chainAdrian Alonso2015-04-29-3/+3
| | | | | | | | | | * Correct daisy chain settings for LPSR iomux controller * Add IOMUX_LPSR_SEL_INPUT_OFS only when pad is identified to be part of lpsr-iomuxc domain Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit e4fd6550b3e5458aaf5049a7e6a12d6e4443c53a)
* MLK-10566: arm :imx7d: fix iomuxc-lpsr daisy chain settingsAdrian Alonso2015-04-29-0/+3
| | | | | | | | | | | | | | | * For IOMUXC LPSR pads when daisy chain register needs to be set the result offsets for sel_input register is incorrect as base address is 0x302C0000 and the passed offset does not resolve to the intended input sel pad register; input sel base offset should start in 0x30330000. * Add an addiotional fixed offset of 0x70000 to address the input sel offset: INPUT_SEL = 0x302C0000 + 0x70000 + sel_input_ofs. Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 5d4612613eb2e85f1929d8cf5cb6aac6ba9e5fd7)
* MLK-10503 imx:mx6qp add missed macroPeng Fan2015-04-29-1/+4
| | | | | | | is_mx6dqp should be only applied for MX6 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit d860559f7913f16f7cb248f7b44140e8c1aa3ee9)
* MLK-10499 imx:mx6qp update printed cpu infoPeng Fan2015-04-29-5/+14
| | | | | | | We should print "MX6QP Rev1.0", but not "MX6Q Rev2.0". Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 64b2be69835af80e0dbc151175617942683a3167)
* MLK-10774-30 imx:mx7 dm thermal driver supportPeng Fan2015-04-29-3/+2
| | | | | | Add thermal driver for mx7 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10178-3 i2c:mxc Add i2c support for i.MX7DPeng Fan2015-04-29-0/+3
| | | | | | | | | | Add i2c support for i.MX7D. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit b52cb9d40e71305b7a11b0bbc68fddd8e84e3b17) Conflicts: drivers/i2c/mxc_i2c.c
* MLK-10176-6 imx: mx7: Modify GPT timer driver for mx7Peng Fan2015-04-29-2/+9
| | | | | | | | | | | | Modify the GPT common platform driver for mx7 which only use 24Mhz OSC as clock source. Note: at default, the mx7d will use system counter as timer. The GPT is disabled. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 6e250796d6a07d84093eeae96e5a6e4c593cdb0b) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10176-5 imx: mx7: Update IOMUX v3 driver for LPSRPeng Fan2015-04-29-3/+17
| | | | | | | | | | | | Since mx7d introduces some LPSR IOMUX pins, add new base to IOMUX v3 driver for these LPSR pins. This patch also include commit b83bb7b6cf26a4bb8983ae89c284fb4018c89870 Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 8aa92b831955c968f802286de561825227e761ce)
* MLK-10176-4 imx: mx7: Add arch level supportYe.Li2015-04-29-3/+25
| | | | | | | | | | | | | | | | | | | Introduce a new cpu type MXC_CPU_MX7D and relevant functions for mx7d. Implement the soc.c for various system level functions like: temperature check, arch init, get mac fuse, boot mode get/apply, etc. Additional, enable building imx common platform files for mx7d. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 47d65aa6bdd109fd9141b5a5d64ab9deeb9dd2b3) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: Makefile arch/arm/cpu/armv7/Makefile arch/arm/imx-common/cpu.c arch/arm/include/asm/arch-imx/cpu.h arch/arm/include/asm/imx-common/boot_mode.h
* ENGR00328312 i2c: imx: Optimize the i2c device recovery solutionFugang Duan2015-04-29-2/+25
| | | | | | | | | | | | | | | | | From i2c spec, if device pull down the SDA line that causes i2c bus dead, host can send out 9 clock to let device release SDA. But for some special device like pfuze100, it pull down SDA line and the solution cannot take effort. The patch just add NACK and STOP signal after 8 dummy clock, and pmic can release SDA line after the recovery. Test case catch 375 times of i2c hang, and all are recovered. Signed-off-by: Fugang Duan <B38611@freescale.com> (cherry picked from commit 53118db42d201d36ca9067b4bb0e2702399e100b) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00321435-1 imx-common: cpu: Disable mxsfb when necessaryLiu Ying2015-04-29-0/+4
| | | | | | | | | | The kernel may break the display pipeline at boot stage and introduce various display artifacts, so let's disable mxsfb in uboot when necessary. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> (cherry picked from commit 539b8416299ec1ae3f57f866dd3f016bdfaa6875) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-81 gis: Add gis moduleYe.Li2015-04-29-0/+8
| | | | | | | | | | | | Add gis module, current gis is support vadc input. Add power down function to lcdif driver. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793) Conflicts: drivers/video/Makefile
* ENGR00315894-58 RDC: Add an iMX platform driver for RDC-SEMAYe.Li2015-04-29-0/+248
| | | | | | | | | | | | | | | | | | | | The RDC driver provides interfaces for setting peripherals and masters at BSP initialization, before using the peripherals driver. Another interfaces for lock/unlock RDC semaphore and permission check. The driver assumes boot CPU which runs u-boot is in Domain 0 (default setting on boot). Users should not set it to other domains. The peripherals ID and masters ID may change on different chip, each should provide definitions of the IDs and be included in "imx-rdc.h". Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 964b2672bfbec14629f5767e59e73fd3bb185e3a) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/imx-common/Makefile arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00315894-55 iMX6SX: add debug monitor supportYe.Li2015-04-29-0/+12
| | | | | | | | | | | | | | | | Debug monitor will print out last failed AXI access info when system reboot is caused by AXI access failure, only works when debug monitor is enabled. Enable this module on i.MX6SX. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit df6ac8531d498021ed379c74fc1847bd2cec7179) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/imx-regs.h
* MLK-10774-1 imx: LDO: add LDO bypassPeng Fan2015-04-29-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch is from two commits: 1. 748eac71fde78aa0c2e8cb3a3bab94bd994c06f5 ENGR00315499-5: Support i.MX6 1.2GHz via LDO bypass Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz, enable LDO bypass and setup PMIC voltages. LDO bypass is dependent on the flatten device tree file. 2. 93d457e4c601ee5266bc30b7dfa5fa1bbfa8500a MLK-9891-1: ARM: imx6: split WDOG_B setting from set_anatop_bypass() function We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to reboot whole board, so split these code to independent function so that board file can call it freely. Board code is not included, board ldo bypass code will be in bsp update code. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ARM: iMX: define an IMX_CONFIG Kconfig optionBoris BREZILLON2015-03-23-0/+2
| | | | | | | | | | | | | IMX_CONFIG is currently passed via the SYS_EXTRA_OPTIONS which is marked as deprecated. Add a new Kconfig file under arch/arm/imx-common and define the IMX_CONFIG Kconfig in there. Each board is supposed to provide a default value pointing to the appropriate imximage.cfg file. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* imx6: Added DEK blob generator commandRaul Cardenas2015-03-02-0/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale's SEC block has built-in Data Encryption Key(DEK) Blob Protocol which provides a method for protecting a DEK for non-secure memory storage. SEC block protects data in a data structure called a Secret Key Blob, which provides both confidentiality and integrity protection. Every time the blob encapsulation is executed, a AES-256 key is randomly generated to encrypt the DEK. This key is encrypted with the OTP Secret key from SoC. The resulting blob consists of the encrypted AES-256 key, the encrypted DEK, and a 16-bit MAC. During decapsulation, the reverse process is performed to get back the original DEK. A caveat to the blob decapsulation process, is that the DEK is decrypted in secure-memory and can only be read by FSL SEC HW. The DEK is used to decrypt data during encrypted boot. Commands added -------------- dek_blob - encapsulating DEK as a cryptgraphic blob Commands Syntax --------------- dek_blob src dst len Encapsulate and create blob of a len-bits DEK at address src and store the result at address dst. Signed-off-by: Raul Cardenas <Ulises.Cardenas@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Ulises Cardenas <ulises.cardenas@freescale.com> Signed-off-by: Ulises Cardenas-B45798 <Ulises.Cardenas@freescale.com>
* ARM: i.MX: provide access to reset cause through get_imx_reset_cause()Eric Nelson2015-02-17-1/+9
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* imx: i2c: Zap unnecessary malloc() callsMarek Vasut2014-12-30-16/+8
| | | | | | | | | | | | | | | | The malloc() calls are unnecessary, just allocate the stuff on stack. While at it, reorder the code a little, so that only one variable is used for the text, use snprintf() instead of sprintf() and use %01d as a formatting string to avoid any possible overflows. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Sean Cross <xobs@kosagi.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
* imx SPL: enable boot from eMMC boot partitions.Pierre Aubert2014-12-30-1/+3
| | | | Signed-off-by: Pierre Aubert <p.aubert@staubli.com>
* sata: fix reset_sata for dwc_ahsataSoeren Moch2014-12-01-0/+3
| | | | | | | | | | | - fix crash when sata device is not initialized - remove disable_sata_clock() since it is not clear which clock for which device should be disabled here - call disable_sata_clock() for mx6 in preboot_os instead Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Nikita Kiryanov <nikita@compulab.co.il> Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
* arm: imx: stop sata on bootNikita Kiryanov2014-11-24-2/+6
| | | | | | | | | | | | | | Ideally, the Linux kernel should get the hardware in its most untouched state. For the most part, U-Boot does not reset the various subsystems it touches before boot, and usually Linux deals with it, but on some boards (cm_fx6) the Linux kernel fails to detect the ssd correctly if sata is used by U-Boot. Power off sata on OS boot so that Linux will have a clean state to work with. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de>
* mx6: thermal: Check cpu temperature via thermal sensorYe.Li2014-11-21-0/+21
| | | | | | | | Add imx6 thermal device to mx6 soc file. Read the cpu temperature using this device to access onchip thermal sensor. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* imx: consolidate set_chipselect_size functionFabio Estevam2014-11-20-0/+31
| | | | | | | | | | Move MX5 specific set_chipselect_size function into generic i.MX part, such that MX6 based boards are able to use this function as well. While doing this the iomuxc gpr member needed to be consolidated between MX5 and MX6. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: Use a common SPL configuration fileFabio Estevam2014-11-20-0/+8
| | | | | | | | | Many boards use a minimal .cfg file in the SPL case. Introduce spl_sd.cfg so that we can reuse it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx6: video_skip: Fix crash on NULL pointerNikolay Dimitrov2014-11-13-1/+5
| | | | | Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg> Cc: Stefano Babic <sbabic@denx.de>
* arm: imx: make bmode command work with SPL/U-Boot comboNikita Kiryanov2014-11-12-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The bmode command forces the SoC to use a specific boot device by writing its boot mode into SRC_GPR9, and notifying the SoC of the change using SRC_GPR10[28] bit: if the bit is on, bootROM uses the value in SRC_GPR9 instead of SRC_SMBR1 to determine the boot device. SPL on the other hand is oblivious to this distinction, so once the bootROM loads SPL from the device configured in SRC_GPR10, SPL will attempt to load U-Boot from the device configured in SRC_SMBR1, which is not updated by the bootROM to the value in SRC_GPR9. The result is that the selected boot device is not used across all the boot stages. Update spl_boot_device() to look at gpr9 when necessary. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-11-05-9/+81
|\
| * imx: mx6 sabreauto: Add board support for USB EHCIYe.Li2014-11-03-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On mx6 sabreauto board, there are two USB ports: 0: OTG 1: HOST The EHCI driver is enabled for this board, but the IOMUX and VBUS power control is not implemented, which cause both USB port failed to work. This patch fix the problem by adding the board support codes. Since the power control uses the GPIO pin from port expander MAX7310, the PCA953X driver is enabled for accessing the MAX7310. The ID pin of OTG Port needs to configure the GPR1 bit 13 for selecting its daisy chain. Add a new function "imx_iomux_set_gpr_register" to handle GPR register setting. Signed-off-by: Ye.Li <B37916@freescale.com>
| * imx: gpt: Add High frequency clock source support for GPTYe.Li2014-11-03-9/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a new configuration "CONFIG_MXC_GPT_HCLK". When it is set, the GPT will select a high frequency clock as clock source. Otherwise, the GPT will stay to use 32Khz OSC as clock source. In the implementation, since only the GPT on i.MX6 series provide the clock source option for 24Mhz OSC. For others (only i.MX5 and i.MX6 compile the driver), if the configuration is set, the perclk will be selected as clock source. MX6Q/D Rev 1.0 and MX6SL are special in the implementation, because they don't have the 24Mhz OSC clock source option, so also select the perclk for them. For MX6SL, we will set the OSC 24Mhz to perclk in CCM, so eventually the clock comes from OSC 24Mhz. Signed-off-by: Ye.Li <B37916@freescale.com>
* | Rename some defines containing FAT in their name to be filesystem genericGuillaume GARDET2014-10-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | Rename some defines containing FAT in their name to be filesystem generic: MMCSD_MODE_FAT => MMCSD_MODE_FS CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini2014-10-27-3/+0
|\ \ | |/
| * ARM: i.MX video: declare displays and display_count publiclyEric Nelson2014-10-21-3/+0
| | | | | | | | | | | | | | | | Declare displays[] and display_count in imx-common/video.h to prevent "Should it be static?" messages when compiling board files with "make C=1". Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* | imx: add missing includesJeroen Hofstee2014-10-25-0/+3
| | | | | | | | Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* | dm: imx: i2c: Use gpio_request() to request GPIOsSimon Glass2014-10-22-0/+25
| | | | | | | | | | | | | | | | | | | | GPIOs should be requested before use. Without this, driver model will not permit the GPIO to be used. Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | imx: Add error checking to setup_i2c()Simon Glass2014-10-22-5/+19
|/ | | | | | | Since this function can fail, check its return value. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
* ARM: mx6: Prevent overflow in DRAM size detectionMarek Vasut2014-08-20-0/+5
| | | | | | | | | | | | | The MX6 DRAM controller can be configured to handle 4GiB of DRAM, but only 3840 MiB of that can be really used. In case the controller is configured to operate a 4GiB module, the imx_ddr_size() function will correctly compute that there is 4GiB of DRAM in the system. Firstly, the return value is 32-bit, so the function will effectively return zero. Secondly, the MX6 cannot address the full 4GiB, but only 3840MiB of all that. Thus, clamp the returned size to 3840MiB in such case. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com>
* mx6: Remove duplication of iomuxc structureFabio Estevam2014-07-23-2/+1
| | | | | | | | | | | | | | | There is no need to keep iomuxc_base_regs structure as it serves the exact same purpose of the iomuxc structure, which is to provide access to the GPR registers. The additional fields of iomuxc_base_regs are not used. Other advantage of 'iomuxc' is that it has a shorter name and the variable declarations can fit into a single line. So remove iomuxc_base_regs structure and use iomuxc instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2014-07-16-4/+0
|\ | | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de> Conflicts: boards.cfg
| * Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-06-30-12/+111
| |\
| * | kbuild: move cmd_mkimage to scripts/Makefile.libMasahiro Yamada2014-06-05-4/+0
| | | | | | | | | | | | | | | | | | | | | Because cmd_mkimage is used in various subdirectories, it seems reasonable to define it in scripts/Makefile.lib. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | mx6: Add support for the mx6solox variantFabio Estevam2014-07-10-0/+2
| |/ |/| | | | | | | | | | | | | | | | | | | | | mx6solox is the newest member of the mx6 family. Some of the new features on this variants are: - Cortex M4 microcontroller (besides the CortexA9) - Dual Gigabit Ethernet Add the initial support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | vf610: fix build due to missing sys_proto.hStefano Babic2014-06-25-1/+1
| | | | | | | | | | | | | | | | commit 67a04ab3ab8522a3a34491853e46105317580df5 fix the build for MX25. The same error happens for VF610 SOC. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | MX25: fix build due to missing sys_proto.hStefano Babic2014-06-06-0/+2
| | | | | | | | | | | | | | | | THe mx25 arch does not have a sys_proto.h file. Instead of creating a dummy file, the file is not included for this SOC. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | imx: sata: return failure if not IMX6Q/IMX6DTim Harvey2014-06-06-1/+6
| | | | | | | | | | | | | | The IMX6QUAD/DUAL have SATA, but the IMX6SOLO/DL do not. Return instead of configuring the SATA clock and GPR13 registers. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* | imx: iomux: add macros to setup iomux for multiple SoC typesTim Harvey2014-06-06-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow imx_iomux_v3_setup_multiple_pads to take a multi-cpu pad_list and add macros for declaring the pad_list that take into account the SoC types supported using CONFIG_MX6QDL (supports both the MX6Q and MX6DL iomux). Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
generated by cgit v1.1 at 2024-08-26 03:48:46 +0000