summaryrefslogtreecommitdiff
path: root/arch/arm/imx-common
Commit message (Collapse)AuthorAgeLines
* arm: vf610: Add IOMUX support for Vybrid VF610Alison Wang2013-06-03-1/+7
| | | | | | | | | | | | | This patch adds the IOMUX support for Vybrid VF610 platform. There is a little difference for IOMUXC module between VF610 and i.MX platform, the muxmode and pad configuration share one 32bit register on VF610, but they are two independent registers on I.MX platform. A CONFIG_IOMUX_SHARE_CONFIG_REG was introduced to fit this difference. Signed-off-by: Alison Wang <b18965@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: iomux-v3: Add iomux-mx35.hBenoît Thébaudeau2013-05-05-1/+1
| | | | | | | | Allow usage of the imx-common/iomux-v3.h framework by including pad settings for the i.MX35. The content of the file is taken from Linux kernel at commit 267dd34, plus the required changes to make it work in U-Boot. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: iomux-v3: Add iomux-mx25.hBenoît Thébaudeau2013-05-05-1/+4
| | | | | | | | Allow usage of the imx-common/iomux-v3.h framework by including pad settings for the i.MX25. The content of the file is taken from Linux kernel at commit 267dd34, plus the required changes to make it work in U-Boot. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* arm: imx: Pack u-boot.bin into uImage for SPLMarek Vasut2013-05-05-4/+10
| | | | | | | | | | | | | | | The U-Boot SPL can parse the uImage format and gather information from it about the payload. Make use of this and wrap u-boot.bin into uImage format. The benefit is the SPL will know the size of the payload instead of using fixed size of the payload defined at compile time. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com>
* imx: Move some i.MX common functions into the imx-common directoryStefan Roese2013-04-22-0/+87
| | | | | | | | | | | | | | | | | | This patch moves the following functions into the imx-common directory: - mxs_wait_mask_set() - mxs_wait_mask_clr() - mxs_reset_block() These are currently used by i.MX28. But the upcoming GPMI NAND port for i.MX6 will also use these functions. So lets move them to a common location to re-use them. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* arm: imx: Change iomux functions to void typeStefan Roese2013-04-16-13/+5
| | | | | | | | They never return anything also than 0, so lets change the function to void instead. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
* imx: Add u-boot-with-nand-spl.imx make targetBenoît Thébaudeau2013-04-12-0/+11
| | | | | | | | | | | | | This image combines the SPL with the i.MX header, the FCB and U-Boot. For i.MX25/35/51, the FCB is ignored by the boot ROM, so this image is just useful because it can be programmed on a NAND Flash page boundary. For i.MX53, the FCB is required by the boot ROM. This does not support i.MX6 so far because its FCB is more complicated. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: Add u-boot-with-spl.imx make targetBenoît Thébaudeau2013-04-12-0/+6
| | | | | | | | | | This image combines the SPL with the i.MX header and U-Boot. This is a convenient way of having a single image to program on some boot devices. The i.MX header has to be added to the SPL before appending U-Boot, so that the boot ROM loads only the SPL. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* i.MX6: Add hdmidet command to detect attached HDMI monitorEric Nelson2013-03-20-0/+38
| | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx-common: timer: fix 32-bit overflowKnut Wohlrab2013-03-20-19/+7
| | | | | | | | | | | | | | | The i.MX6 common timer uses the 32-bit variable tbl (time base lower) to record the overflow of the 32-bit counter. I.e. if the counter overflows, the variable tbl does overflow, too. To capture this overflow, use the variable tbu (time base upper), too. Return the combined value of tbl and tbu. lastinc is unused then, remove it. Signed-off-by: Knut Wohlrab <knut.wohlrab@de.bosch.com> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-02-12-0/+13
|\
| * imximage.cfg: run files through C preprocessorTroy Kisky2013-01-22-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | The '#' used as comments in the files cause the preprocessor trouble, so change to /* */. The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile .gitignore was updated to ignore .cfgtmp files. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* | ppc: arm: Move sdhc_clk into arch_global_dataSimon Glass2013-02-04-8/+8
| | | | | | | | | | | | | | This is used by both powerpc and arm, but I think it still qualifies as architecture-specific. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Move lastinc to arch_global_dataSimon Glass2013-02-01-1/+1
| | | | | | | | | | | | Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Move tbl to arch_global_dataSimon Glass2013-02-01-1/+1
|/ | | | | | Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* mx31/mx35/mx51/mx53/mx6: add watchdogTroy Kisky2013-01-13-5/+0
| | | | | | | Use a common watchdog driver for all these cpus. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx-common: cpu: add imx_ddr_sizeTroy Kisky2012-11-10-0/+50
| | | | | | | | | | Read memory setup registers to determine size of available ram. This routine works for mx53/mx6x I need this because when mx6solo called get_ram_size with a too large maximum size, the system hanged. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololiteTroy Kisky2012-11-10-7/+9
| | | | | | | | | | Previously, the same value was returned for both mx6dl and mx6solo. Check number of processors to differeniate. Also, a freescale patch says that sololite has its cpu/rev stored at 0x280 instead of 0x260. I don't have a sololite to verify. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* Merge remote-tracking branch 'u-boot-imx/master'Albert ARIBAUD2012-10-27-2/+3
|\
| * i.MX: iomux: input pad array can be constEric Nelson2012-10-16-2/+3
| | | | | | | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
* | common: Convert the U-Boot commands to LG-arraysMarek Vasut2012-10-22-4/+7
|/ | | | | | | | | | | | | | | | | | This patch converts the old method of creating a list of command onto the new LG-arrays code. The old u_boot_cmd section is converted to new u_boot_list_cmd subsection and LG-array macros used as needed. Minor adjustments had to be made to the common code to work with the LG-array macros, mostly the fixup_cmdtable() calls are now passed the ll_entry_start and ll_entry_count instead of linker-generated symbols. The command.c had to be adjusted as well so it would use the newly introduced LG-array API instead of directly using linker-generated symbols. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
* mx5/6 clocks: Fix SDHC clocksBenoît Thébaudeau2012-10-15-1/+17
| | | | | | | | | | | | | | | | The i.MX5 eSDHC clocks were considered as coming from the IPG clock although they have dedicated clock paths. Also, on i.MX5/6, each SDHC instance has a dedicated clock, so gd->sdhc_clk must be set accordingly. This is good for the case only a single SDHC instance is used (initialization made with fsl_esdhc_mmc_init()). A future patch will fix the multi-instance use case (initialization made directly with fsl_esdhc_initialize()). Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Eric Bénard <eric@eukrea.com> Cc: Otavio Salvador <otavio@ossystems.com.br>
* mx5/6: Define default SoC input clock frequenciesBenoît Thébaudeau2012-10-15-6/+6
| | | | | | | | | | | Define default SoC input clock frequencies for i.MX5/6 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Jason Liu <r64343@freescale.com> Cc: Matt Sealey <matt@genesi-usa.com> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* i.MX: shut down video before launch of O/SEric Nelson2012-09-24-0/+9
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* MX: set a common place to share code for Freescale i.MXStefano Babic2012-09-10-0/+674
Up now only MX5 and MX6 can share code, because they have a common source directory in cpu/armv7. Other not armv7 i.MX can profit of the same shared code. Move these files into a directory accessible for all, similar to plat-mxc in linux. Signed-off-by: Stefano Babic <sbabic@denx.de>