summaryrefslogtreecommitdiff
path: root/arch/arm/imx-common/cpu.c
Commit message (Collapse)AuthorAgeLines
* imx: imx-common: print i.MX 7 SoC names consistentlyStefan Agner2016-05-17-1/+1
| | | | | | | | | According to the product website, the full names are i.MX 7Solo and i.MX 7Dual, whereas the short form is i.MX7S and i.MX7D. Be consistent and print the short form for both supported i.MX 7 SoCs. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* mx7: Distinguish between dual and solo versionsFabio Estevam2016-03-09-0/+2
| | | | | | | | | | Read the number of cores in the fuses to distinguish between the dual and solo versions. Tested on a mx7d sabresd and on a mx7solo warp7. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* imx: imx-common: power down lcdif before boot osPeng Fan2015-11-12-0/+3
| | | | | | | | | | | | | | Need to call lcdif_power_down to make lcdif in initial state before kernel boot. Similar issue for uboot reset with lcdif enabled, system will hang after serveral times resetting. Need to let lcdif initial state to make all go well. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* imx-common: cpu: Do not print on invalid temperatureFabio Estevam2015-09-13-2/+2
| | | | | | | | | | | | | | | It is not very useful to have the message below on every boot (especially when we are using early silicon): U-Boot 2015.10-rc2-23945-g37cf215 (Sep 08 2015 - 14:12:14 -0300) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device , so turn the error message into debug level. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx: imx7d: add imx-common cpu support for imx7dAdrian Alonso2015-09-13-0/+19
| | | | | | | | | Add imx-common cpu support for imx7d SoC - Update reset_cause for imx7d - Enable watchdog driver built for imx7d Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* thermal: imx_thermal: rework driver to be reusedAdrian Alonso2015-09-13-6/+4
| | | | | | | | Rework imx_thermal driver to be used across i.MX processor that support thermal sensor Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* imx: mx6ul: Add i.MX6UL CPU typePeng Fan2015-08-02-0/+2
| | | | | | | | | | Add MXC_CPU_MX6UL for i.MX6UL CPU type which is got at runtime from DIGPROG register. But the value has been occupied by MXC_CPU_MX6D which is not real id from DIGPROG register, so change i.MX6D to value 0x67 which was not occupied. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* imx: add cpu type for i.MX6QP/DPPeng Fan2015-08-02-0/+4
| | | | | | | | | | | Add cpu type for i.MX6QP/DP. This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP and MXC_CPU_MX6DP, we should use: (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)). Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx: drop warning: unused variable 'max_freq'Stefano Babic2015-06-08-1/+2
| | | | | | | max_freq in print_cpuinfo is used only with imx6. Signed-off-by: Stefano Babic <sbabic@denx.de>
* Revert "imx: drop warning: unused variable 'max_freq'"Stefano Babic2015-05-28-2/+1
| | | | | | This reverts commit a0117a5e416629932becf079589f5e1859eab90a. Signed-off-by: Stefano Babic <sbabic@denx.de>
* imx: drop warning: unused variable 'max_freq'Stefano Babic2015-05-27-1/+2
| | | | | | | max_freq in print_cpuinfo is used only with imx6. Signed-off-by: Stefano Babic <sbabic@denx.de>
* imx: mx6: add display of CPU temperature grade in print_cpuinfo()Tim Harvey2015-05-19-4/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_IMX6_THERMAL is defined print the CPU temperature grade info along with the current temperature. Before: CPU: Temperature 42 C After: CPU: Automotive temperature grade (-40C to 125C) at 42C CPU: Industrial temperature grade (-40C to 105C) at 42C CPU: Extended Commercial temperature grade (-20C to 105C) at 42C Cc: Stefan Roese <sr@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Jon Nettleton <jon.nettleton@gmail.com> Cc: Jason Liu <r64343@freescale.com> Cc: Ye Li <b37916@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Peng Fan <b51431@freescale.com> Tested-by: Nikolay Dimitrov <picmaster@mail.bg> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: mx6: display max cpu frequency in print_cpuinfo()Tim Harvey2015-05-19-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Display the max CPU frequency as well as the current running CPU frequency if the max CPU frequency is available and differs from the current CPU frequency. Before: CPU: Freescale i.MX6Q rev1.2 at 792 MHz After - using an 800MHz IMX6DL (running at its max) CPU: Freescale i.MX6DL rev1.1 at 792 MHz After - using a 1GHz IMX6Q (not running at its max): CPU: Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz) Cc: Stefan Roese <sr@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Jon Nettleton <jon.nettleton@gmail.com> Cc: Jason Liu <r64343@freescale.com> Cc: Ye Li <b37916@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Peng Fan <b51431@freescale.com> Tested-by: Nikolay Dimitrov <picmaster@mail.bg> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* arm/imx-common: Fix warning 'get_reset_cause' defined but not usedPrabhakar Kushwaha2015-05-19-0/+2
| | | | | | | | | | | Fix below warning arch/arm/imx-common/cpu.c:29:14: warning: ‘get_reset_cause’ defined but not used static char *get_reset_cause(void) Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* ARM: i.MX: provide access to reset cause through get_imx_reset_cause()Eric Nelson2015-02-17-1/+9
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* sata: fix reset_sata for dwc_ahsataSoeren Moch2014-12-01-0/+3
| | | | | | | | | | | - fix crash when sata device is not initialized - remove disable_sata_clock() since it is not clear which clock for which device should be disabled here - call disable_sata_clock() for mx6 in preboot_os instead Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Nikita Kiryanov <nikita@compulab.co.il> Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
* arm: imx: stop sata on bootNikita Kiryanov2014-11-24-2/+6
| | | | | | | | | | | | | | Ideally, the Linux kernel should get the hardware in its most untouched state. For the most part, U-Boot does not reset the various subsystems it touches before boot, and usually Linux deals with it, but on some boards (cm_fx6) the Linux kernel fails to detect the ssd correctly if sata is used by U-Boot. Power off sata on OS boot so that Linux will have a clean state to work with. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de>
* mx6: thermal: Check cpu temperature via thermal sensorYe.Li2014-11-21-0/+21
| | | | | | | | Add imx6 thermal device to mx6 soc file. Read the cpu temperature using this device to access onchip thermal sensor. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* imx: consolidate set_chipselect_size functionFabio Estevam2014-11-20-0/+31
| | | | | | | | | | Move MX5 specific set_chipselect_size function into generic i.MX part, such that MX6 based boards are able to use this function as well. While doing this the iomuxc gpr member needed to be consolidated between MX5 and MX6. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx: add missing includesJeroen Hofstee2014-10-25-0/+2
| | | | Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* ARM: mx6: Prevent overflow in DRAM size detectionMarek Vasut2014-08-20-0/+5
| | | | | | | | | | | | | The MX6 DRAM controller can be configured to handle 4GiB of DRAM, but only 3840 MiB of that can be really used. In case the controller is configured to operate a 4GiB module, the imx_ddr_size() function will correctly compute that there is 4GiB of DRAM in the system. Firstly, the return value is 32-bit, so the function will effectively return zero. Secondly, the MX6 cannot address the full 4GiB, but only 3840MiB of all that. Thus, clamp the returned size to 3840MiB in such case. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com>
* mx6: Add support for the mx6solox variantFabio Estevam2014-07-10-0/+2
| | | | | | | | | | | | mx6solox is the newest member of the mx6 family. Some of the new features on this variants are: - Cortex M4 microcontroller (besides the CortexA9) - Dual Gigabit Ethernet Add the initial support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx: add comments and remove unused struct fieldsTim Harvey2014-06-06-9/+7
| | | | | | | | | | | | | | | | | Add comment block for the imx_ddr_size function and remove the extra unused fields from struct esd_mmdc_regs which are also not common between IMX53 and IMX6. Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
* mx6: Distinguish mx6dual from mx6quadFabio Estevam2014-02-11-0/+2
| | | | | | | | | | | | Currently when we boot a mx6dual U-boot reports that it is a mx6quad. Report it as MX6D instead: CPU: Freescale i.MX6D rev1.2 at 792 MHz Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-common: remove extraneous semicolon from macroEric Nelson2013-11-27-2/+2
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-17/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* mx31/mx35/mx51/mx53/mx6: add watchdogTroy Kisky2013-01-13-5/+0
| | | | | | | Use a common watchdog driver for all these cpus. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx-common: cpu: add imx_ddr_sizeTroy Kisky2012-11-10-0/+50
| | | | | | | | | | Read memory setup registers to determine size of available ram. This routine works for mx53/mx6x I need this because when mx6solo called get_ram_size with a too large maximum size, the system hanged. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololiteTroy Kisky2012-11-10-7/+9
| | | | | | | | | | Previously, the same value was returned for both mx6dl and mx6solo. Check number of processors to differeniate. Also, a freescale patch says that sololite has its cpu/rev stored at 0x280 instead of 0x260. I don't have a sololite to verify. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* i.MX: shut down video before launch of O/SEric Nelson2012-09-24-0/+9
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* MX: set a common place to share code for Freescale i.MXStefano Babic2012-09-10-0/+140
Up now only MX5 and MX6 can share code, because they have a common source directory in cpu/armv7. Other not armv7 i.MX can profit of the same shared code. Move these files into a directory accessible for all, similar to plat-mxc in linux. Signed-off-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-11-09 09:44:10 +0000