summaryrefslogtreecommitdiff
path: root/arch/arm/dts
Commit message (Collapse)AuthorAgeLines
* sunxi: Sync sun8i-h3-orangepi-plus.dts with upstreamHans de Goede2016-07-15-100/+37
| | | | | | | | This enables extra USB controllers which enable use of the 3rd USB port on the new Orange Pi Plus 2E variant. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* net: Add EMAC driver for H3/A83T/A64 SoCs.Amit Singh Tomar2016-07-15-0/+96
| | | | | | | | | | | This patch add EMAC driver support for H3/A83T/A64 SoCs. Tested on Pine64(A64-External PHY) and Orangepipc(H3-Internal PHY). BIG Thanks to Andre for providing some of the DT code. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-07-11-11/+143
|\
| * ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHzVignesh R2016-07-09-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | According to Data Manual(SPRS915P) of AM57x, TI QSPI controller on DRA74(rev 1.1+)/DRA72 EVM can support up to 64MHz in MODE-0, whereas MODE-3 is limited to 48MHz. Hence, switch to MODE-0 for better throughput. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: K2G: Add support for QSPI controllerVignesh R2016-07-09-0/+59
| | | | | | | | | | | | | | | | | | | | | | K2G SoC has a Cadence QSPI controller to communicate with NOR flash devices. Add DT nodes to support the same. Also, K2G EVM has a s25fl512s flash connect to QSPI bus at CS 0. Add nor flash slave node for the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2g: add support for Davinci SPI controllerVignesh R2016-07-09-0/+71
| | | | | | | | | | | | | | | | | | | | | | K2G SoC has 4 SPI instances that are compatible with davinci_spi controller(present on previous generation of Keystone2 devices). Add DT nodes for the same. K2G EVM has a N25Q128A13 SPI NOR flash connected on SPI-1. Add DT bindings for the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2l: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2e: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2hk: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: keystone2: add SPI aliases for davinci SPI nodesVignesh R2016-07-09-0/+3
| | | | | | | | | | | | | | | | | | Add aliases for SPI nodes in order for it to be probed by the DM framework. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | video: tegra: Move to using simple-panel and pwm-backlightSimon Glass2016-07-05-72/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have standard drivers for panels and backlights which can do most of the work for us. Move the tegra20 LCD driver over to use those instead of custom code. This patch includes device tree changes for the nvidia boards. I have only been able to test seaboard. If this patch is applied, these boards will also need to be synced with the kernel, and updated to use display-timings: - colibri - medcom-wide - paz00 - tec Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: dts: Sync tegra20 device tree files with LinuxSimon Glass2016-07-05-73/+2154
|/ | | | | | | | Sync everything except the display panel, which will come in a future patch. One USB port is left disabled since we don't want to support it in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* sunxi: Add defconfig and DTS file for Allwinner R16 EVB (Parrot)Quentin Schulz2016-07-02-1/+350
| | | | | | | | | | | | | | | The Parrot Board is an evaluation board with an Allwinner R16 (assumed to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2 controllable buttons, an LVDS port with separated backlight and capacitive touch panel ports, an audio/microphone jack, a camera CSI port, 2 sets of 22 GPIOs and an accelerometer. The DTS file is identical to the one submitted to the upstream kernel. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: dts: uniphier: add AIDET nodesMasahiro Yamada2016-07-02-0/+40
| | | | | | | The AIDET (ARM Interrupt Detector Add-on Circuit) is a kind of syscon block related with the interrupt controller. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: dts: uniphier: sync Device Trees with upstream LinuxMasahiro Yamada2016-07-02-138/+99
| | | | | | I periodically sync Device Trees for better maintainability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-06-28-105/+0
|\
| * armv8: dts: fsl: Remove cpu nodes from Layerscape DTSIsAbhimanyu Saini2016-06-28-105/+0
| | | | | | | | | | | | | | | | | | | | | | | | Currently layescape SoCs are not using cpu nodes. So removing them in favour of compatibly with similar SoCs that have different cores like LS2080A and LS2088A. This has been tested on LS2080AQDS, LS1043ARDB, LS1012ARDB. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | arm: at91: taurus/axm: add DM and DTS supportHeiko Schocher2016-06-26-0/+120
| | | | | | | | | | | | | | | | | | | | add DM and DTS support for the at91 based siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: at91: smartweb: add DM and DTS supportHeiko Schocher2016-06-26-1/+112
| | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: at91: dts: Bring in dts files for AT91SAM9G20 and SAM9260Heiko Schocher2016-06-26-0/+3012
| | | | | | | | | | | | | | | | | | Add this files from Linux v4.6-rc5 66b8a424d: [workqueue: fix ghost PENDING flag while doing MQ IO] Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Andreas Bießmann <andreas@biessmann.org>
* | corvus DTS / DM supportHeiko Schocher2016-06-26-1/+111
|/ | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebase on current ToT, don't delete gurnard DTB creation] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* sunxi: Add defconfig and dts file for inet86dz boardHans de Goede2016-06-20-0/+294
| | | | | | | | | | | | | | | The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file this commit adds is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add defconfig and dts file for Polaroid MID2407PXE03 tabletHans de Goede2016-06-20-0/+303
| | | | | | | | | | | | The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* mailbox: add Tegra186 HSP driverStephen Warren2016-06-19-0/+13
| | | | | | | | | | Tegra186's HSP module implements doorbells, mailboxes, semaphores, and shared interrupts. This patch provides a driver for HSP, and hooks it into the mailbox API. Currently, only doorbells are supported. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2016-06-18-0/+107
|\
| * ARM: socfpga: add support for IS1 boardPavel Machek2016-06-08-0/+107
| | | | | | | | | | | | | | | | This adds support for IS1 board. Pretty usual socfpga board, 256MB of RAM, does not have MMC, two SPI chips, one ethernet port, two additional ethernet ports connected to the FPGA. Signed-off-by: Pavel Machek <pavel@denx.de>
* | arm, am335x: siemens: enable DM/DTS supportHeiko Schocher2016-06-17-2/+1536
| | | | | | | | | | | | enable basic DM/DTS support for the siemens am335x based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
* | ARM: dts: AM572x-IDK Initial SupportSchuyler Patton2016-06-13-1/+393
| | | | | | | | | | | | | | | | | | Add initial DTS support for AM572-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | board: am57xx: Rename TARGET_BEAGLE_X15 as TARGET_AM57XX_EVMLokesh Vutla2016-06-13-1/+1
| | | | | | | | | | | | | | | | | | board/am57xx supports all boards based on am57xx. Rename the taget as TARGET_AM57XX_EVM. Fixes: 74cc8b097d9af ("board: ti: beagle_x15: Rename to indicate support for TI am57xx evms") Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-06-13-0/+1493
|\ \
| * | arm: at91: Add support for gurnardAndre Renaud2016-06-12-0/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is based on Snapper 9G45 which has an Atmel AT91SAM9G45 chip and 128MB of SDRAM. It includes a small LCD, 2xUSB host, SD card, Ethernet and two UARTs. Signed-off-by: Andre Renaud <andre@designa-electronics.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [apply CONFIG_BOOTDELAY transition] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
| * | arm: at91: dts: Bring in device tree file for AT91SAM9G45Simon Glass2016-06-12-0/+1336
| |/ | | | | | | | | | | | | | | | | | | Add this file from Linux v4.5. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Tested-on: smartweb, corvus, taurus, axm Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* | dts: ls2080aqds: Add QSPI dts nodeYuan Yao2016-06-10-0/+24
|/ | | | | | | Add QSPI controller and slave dts node for LS2080AQDS board. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge http://git.denx.de/u-boot-samsungTom Rini2016-06-06-3/+318
|\ | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/peach-pi_defconfig configs/peach-pit_defconfig
| * exynos: dts: Add display-related device tree fragmentsSimon Glass2016-05-25-3/+196
| | | | | | | | | | | | | | | | | | | | | | | | Bring in device tree pieces related to display from Linux 4.4 for: - snow - peach_pit - peach_pi - spring Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos: dts: Add pwm device tree nodeSimon Glass2016-05-25-0/+14
| | | | | | | | | | | | | | Add this node from Linux v4.4 so that PWMs can be used in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * board: samsung: add initial Espresso7420 board supportThomas Abraham2016-05-25-0/+25
| | | | | | | | | | | | | | | | | | | | Espresso7420 is a development/evaluation board for Exynos7420 SoC. It includes multiple onboard compoments (EMMC/Codec) and various interconnects (USB/HDMI). Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: exynos: add support for Exynos7420 SoCThomas Abraham2016-05-25-0/+83
| | | | | | | | | | | | | | | | | | Add support for Exynos7420 SoC. The Exynos7420 SoC has four Cortex-A57 and four Cortex-A53 CPUs and includes various peripheral controllers. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-06-06-0/+213
|\ \
| * | ARM64: zynqmp: Add support for zc1751-dc4Michal Simek2016-06-06-0/+213
| | | | | | | | | | | | | | | | | | zc1751-dc4 contains four GEMs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-06-04-1/+368
|\ \ \
| * | | armv8: ls1012a: Add support of ls1012afrdm boardPrabhakar Kushwaha2016-06-03-1/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance development platform, with a complete debugging environment. The LS1012AFRDM board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | armv8: ls1012a: Add support of ls1012ardb boardPrabhakar Kushwaha2016-06-03-1/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | armv8: ls1012a: Add support of ls1012aqds boardPrabhakar Kushwaha2016-06-03-1/+258
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QorIQ LS1012A Development System (LS1012AQDS) is a high-performance development platform, with a complete debugging environment. The LS1012AQDS board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2016-06-03-0/+82
|\ \ \ \ | |_|/ / |/| | |
| * | | ARM: tegra: add p2771-0000 board supportStephen Warren2016-05-31-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P2771-0000 is a P3310 CPU board married to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet, USB3 host port, SATA, PCIe, and two GPIO expansion headers. Currently, due to U-Boot's level of support for Tegra186, the only features supported by U-Boot are the console UART and the on-board eMMC. Additional features will be added over time. U-Boot has so far been tested by replacing the kernel image on the device with a U-Boot binary. It is anticipated that U-Boot will eventually replace the CCPLEX bootloader binary, as on previous chips. This hasn't yet been tested. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: add core Tegra186 supportStephen Warren2016-05-31-0/+56
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the bare minimum code to support Tegra186, with UART and eMMC working. The empty gpio.h is required because <asm/gpio.h> includes it. A future cleanup round may be able to solve this for all Tegra generations at once. mach-tegra/Makefile is adjusted not to compile anything for Tegra186, but instead to defer everything to mach-tegra/tegra186/Makefile. This allows the SoC code to pick-and-choose which of the C files in the "common" mach-tegra/ directory to compile in based on the SoC's needs. Most of the code is not valid for Tegra186, and this approach removes the need for mach-tegra/Makefile to contain many SoC-specific ifdefs. This approach may be applied to all other Tegra SoCs in a future cleanup round. board186.c is introduced to replace board.c and board2.c. These files currently contain a slew of SoC- and board-specific code that is not valid for Tegra186. This approach avoids adding yet more ifdefs to those files. A future cleanup round may refactor most of board*.c into board-/ SoC-specific functions files thus allowing the top-level functions like board_init_early_f to be shared again. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | arm: socfpga: Add samtec VIN|ING boardMarek Vasut2016-06-01-1/+115
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for board based on the popular Altera Cyclone V SoC. This board has the following properties: - 1 GiB of DRAM - 1 Gigabit ethernet - 1 USB gadget port - 1 USB host port with an on-board hub - 2 QSPI NORs connected to the Cadence QSPI core - Multiple I2C EEPROMs and one I2C temperature sensor Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> --- V2: Update the defconfig as per Tom's request
* | Merge git://git.denx.de/u-boot-rockchipTom Rini2016-05-27-1/+17
|\ \
| * | rockchip: rock2: dts: use status = "okay" not okSjoerd Simons2016-05-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | u-boot only recognize okay to enable a node (Linux seems to be more lenient here). So use okay instead. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-02 09:23:33 +0000