summaryrefslogtreecommitdiff
path: root/arch/arm/dts
Commit message (Collapse)AuthorAgeLines
...
| * sunxi: Add EMAC ethernet0 alias for H3 dtsiChen-Yu Tsai2016-07-26-0/+4
| | | | | | | | | | | | | | | | | | | | The sunxi ethernet address generation code looks for ethernet[0-3] aliases to find ethernet controllers to generate MAC addresses for. Without a valid address, the driver fails to register. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Add defconfig and dts file for the Orange Pi PC Plus SBCHans de Goede2016-07-26-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a new Orange Pi PC *Plus* version available now, this is an extended version of the regular Orange Pi PC with sdio wifi and an eMMC. The upstream kernel devs have decided that they want a separate dts for the PC Plus rather then sharing a single dts between the regular PC and the PC Plus. So add a new orangepi_pc_plus_defconfig to match. The added dts file matches the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | dts: add support for Rockchip rk3399 socKever Yang2016-07-25-1/+1134
| | | | | | | | | | | | | | | | | | | | | | These files are from kernel upstream: "649a371 Add linux-next specific files for 20160616" with some modification need by U-Boot: - chosen with stdout-path to uart2. - add clock-frequency for uart2 Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: rk3288: add fastboot supportXu Ziyuan2016-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Enable fastboot feature on rk3288. This path doesn't support the fastboot flash function command entirely. We will hit "cannot find partition" assertion without specified partition environment. Define gpt partition layout in specified board such as firefly-rk3288, then enjoy it! Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: add basic support for evb-rk3288 boardXu Ziyuan2016-07-25-0/+439
|/ | | | | | | | | | | | | | evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sunxi: Enable NAND controller on the CHIPBoris Brezillon2016-07-24-0/+44
| | | | | | | Enable the NAND controller in the sun5i-r8-chip.dts. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
* sun5i: Add NAND controller to the sun5i DTSIMaxime Ripard2016-07-24-0/+49
| | | | | | | Add the NAND controller definition to sun5i.dtsi. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* ARM: dts: uniphier: renumber serial aliases for Gentil/Vodka boardsMasahiro Yamada2016-07-23-8/+8
| | | | | | | | | | | | On these two boards, the serial0 is used for inter-chip connection, so cannot be used for login console. The serial2 is used instead for them, but it is tedious to use because upper level deployment projects must switch login console per board. [ Linux commit: 2a4a2aadbaad9dffdb564a2895348f3d8e825416 ] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: tegra: split p2771-0000 buildStephen Warren2016-07-21-3/+18
| | | | | | | | | | | | | | | There are multiple versions of p2771-0000 board. There are SW visible incompatible differences between the versions, and they are relevant to U-Boot. Create separate "A02" and "B00" defconfigs (named after the first and/or only board rev the defconfig supports) so that users can select which build they want. With the minimal set of HW currently enabled in U-Boot, the differences are irrelevant, hence the DT files aren't different. However, that will change in a future patch. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: fix Tegra186 DT GPIO binding headerStephen Warren2016-07-21-1/+1
| | | | | | | | Tegra186 uses different GPIO port IDs compared to previous chips. Make sure the SoC DT file includes the correct GPIO binding header. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-07-15-100/+312
|\
| * sunxi: Add defconfig and dts file for the Orange Pi Lite SBCHans de Goede2016-07-15-0/+179
| | | | | | | | | | | | | | | | | | | | | | The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Sync sun8i-h3-orangepi-plus.dts with upstreamHans de Goede2016-07-15-100/+37
| | | | | | | | | | | | | | | | This enables extra USB controllers which enable use of the 3rd USB port on the new Orange Pi Plus 2E variant. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * net: Add EMAC driver for H3/A83T/A64 SoCs.Amit Singh Tomar2016-07-15-0/+96
| | | | | | | | | | | | | | | | | | | | | | This patch add EMAC driver support for H3/A83T/A64 SoCs. Tested on Pine64(A64-External PHY) and Orangepipc(H3-Internal PHY). BIG Thanks to Andre for providing some of the DT code. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2016-07-15-10/+10
|\ \
| * | ARM: exynos4: dts: add the prefix '/' for aliases nodesJaehoon Chung2016-07-12-10/+10
| | | | | | | | | | | | | | | | | | | | | It's correct to use '/' as prefix for aliases nodes. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | rockchip: Update the sdram-channel property to support of-platdataSimon Glass2016-07-14-1/+2
| |/ |/| | | | | | | | | | | Add an extra byte so that this data is not byteswapped. Add a comment to the code to explain the purpose. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-07-11-11/+143
|\ \ | |/ |/|
| * ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHzVignesh R2016-07-09-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | According to Data Manual(SPRS915P) of AM57x, TI QSPI controller on DRA74(rev 1.1+)/DRA72 EVM can support up to 64MHz in MODE-0, whereas MODE-3 is limited to 48MHz. Hence, switch to MODE-0 for better throughput. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: K2G: Add support for QSPI controllerVignesh R2016-07-09-0/+59
| | | | | | | | | | | | | | | | | | | | | | K2G SoC has a Cadence QSPI controller to communicate with NOR flash devices. Add DT nodes to support the same. Also, K2G EVM has a s25fl512s flash connect to QSPI bus at CS 0. Add nor flash slave node for the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2g: add support for Davinci SPI controllerVignesh R2016-07-09-0/+71
| | | | | | | | | | | | | | | | | | | | | | K2G SoC has 4 SPI instances that are compatible with davinci_spi controller(present on previous generation of Keystone2 devices). Add DT nodes for the same. K2G EVM has a N25Q128A13 SPI NOR flash connected on SPI-1. Add DT bindings for the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2l: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2e: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2hk: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: keystone2: add SPI aliases for davinci SPI nodesVignesh R2016-07-09-0/+3
| | | | | | | | | | | | | | | | | | Add aliases for SPI nodes in order for it to be probed by the DM framework. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | video: tegra: Move to using simple-panel and pwm-backlightSimon Glass2016-07-05-72/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have standard drivers for panels and backlights which can do most of the work for us. Move the tegra20 LCD driver over to use those instead of custom code. This patch includes device tree changes for the nvidia boards. I have only been able to test seaboard. If this patch is applied, these boards will also need to be synced with the kernel, and updated to use display-timings: - colibri - medcom-wide - paz00 - tec Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: dts: Sync tegra20 device tree files with LinuxSimon Glass2016-07-05-73/+2154
|/ | | | | | | | Sync everything except the display panel, which will come in a future patch. One USB port is left disabled since we don't want to support it in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* sunxi: Add defconfig and DTS file for Allwinner R16 EVB (Parrot)Quentin Schulz2016-07-02-1/+350
| | | | | | | | | | | | | | | The Parrot Board is an evaluation board with an Allwinner R16 (assumed to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2 controllable buttons, an LVDS port with separated backlight and capacitive touch panel ports, an audio/microphone jack, a camera CSI port, 2 sets of 22 GPIOs and an accelerometer. The DTS file is identical to the one submitted to the upstream kernel. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: dts: uniphier: add AIDET nodesMasahiro Yamada2016-07-02-0/+40
| | | | | | | The AIDET (ARM Interrupt Detector Add-on Circuit) is a kind of syscon block related with the interrupt controller. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: dts: uniphier: sync Device Trees with upstream LinuxMasahiro Yamada2016-07-02-138/+99
| | | | | | I periodically sync Device Trees for better maintainability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-06-28-105/+0
|\
| * armv8: dts: fsl: Remove cpu nodes from Layerscape DTSIsAbhimanyu Saini2016-06-28-105/+0
| | | | | | | | | | | | | | | | | | | | | | | | Currently layescape SoCs are not using cpu nodes. So removing them in favour of compatibly with similar SoCs that have different cores like LS2080A and LS2088A. This has been tested on LS2080AQDS, LS1043ARDB, LS1012ARDB. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | arm: at91: taurus/axm: add DM and DTS supportHeiko Schocher2016-06-26-0/+120
| | | | | | | | | | | | | | | | | | | | add DM and DTS support for the at91 based siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: at91: smartweb: add DM and DTS supportHeiko Schocher2016-06-26-1/+112
| | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: at91: dts: Bring in dts files for AT91SAM9G20 and SAM9260Heiko Schocher2016-06-26-0/+3012
| | | | | | | | | | | | | | | | | | Add this files from Linux v4.6-rc5 66b8a424d: [workqueue: fix ghost PENDING flag while doing MQ IO] Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Andreas Bießmann <andreas@biessmann.org>
* | corvus DTS / DM supportHeiko Schocher2016-06-26-1/+111
|/ | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebase on current ToT, don't delete gurnard DTB creation] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* sunxi: Add defconfig and dts file for inet86dz boardHans de Goede2016-06-20-0/+294
| | | | | | | | | | | | | | | The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file this commit adds is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add defconfig and dts file for Polaroid MID2407PXE03 tabletHans de Goede2016-06-20-0/+303
| | | | | | | | | | | | The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* mailbox: add Tegra186 HSP driverStephen Warren2016-06-19-0/+13
| | | | | | | | | | Tegra186's HSP module implements doorbells, mailboxes, semaphores, and shared interrupts. This patch provides a driver for HSP, and hooks it into the mailbox API. Currently, only doorbells are supported. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2016-06-18-0/+107
|\
| * ARM: socfpga: add support for IS1 boardPavel Machek2016-06-08-0/+107
| | | | | | | | | | | | | | | | This adds support for IS1 board. Pretty usual socfpga board, 256MB of RAM, does not have MMC, two SPI chips, one ethernet port, two additional ethernet ports connected to the FPGA. Signed-off-by: Pavel Machek <pavel@denx.de>
* | arm, am335x: siemens: enable DM/DTS supportHeiko Schocher2016-06-17-2/+1536
| | | | | | | | | | | | enable basic DM/DTS support for the siemens am335x based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
* | ARM: dts: AM572x-IDK Initial SupportSchuyler Patton2016-06-13-1/+393
| | | | | | | | | | | | | | | | | | Add initial DTS support for AM572-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | board: am57xx: Rename TARGET_BEAGLE_X15 as TARGET_AM57XX_EVMLokesh Vutla2016-06-13-1/+1
| | | | | | | | | | | | | | | | | | board/am57xx supports all boards based on am57xx. Rename the taget as TARGET_AM57XX_EVM. Fixes: 74cc8b097d9af ("board: ti: beagle_x15: Rename to indicate support for TI am57xx evms") Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-06-13-0/+1493
|\ \
| * | arm: at91: Add support for gurnardAndre Renaud2016-06-12-0/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is based on Snapper 9G45 which has an Atmel AT91SAM9G45 chip and 128MB of SDRAM. It includes a small LCD, 2xUSB host, SD card, Ethernet and two UARTs. Signed-off-by: Andre Renaud <andre@designa-electronics.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [apply CONFIG_BOOTDELAY transition] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
| * | arm: at91: dts: Bring in device tree file for AT91SAM9G45Simon Glass2016-06-12-0/+1336
| |/ | | | | | | | | | | | | | | | | | | Add this file from Linux v4.5. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Tested-on: smartweb, corvus, taurus, axm Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* | dts: ls2080aqds: Add QSPI dts nodeYuan Yao2016-06-10-0/+24
|/ | | | | | | Add QSPI controller and slave dts node for LS2080AQDS board. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge http://git.denx.de/u-boot-samsungTom Rini2016-06-06-3/+318
|\ | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/peach-pi_defconfig configs/peach-pit_defconfig
| * exynos: dts: Add display-related device tree fragmentsSimon Glass2016-05-25-3/+196
| | | | | | | | | | | | | | | | | | | | | | | | Bring in device tree pieces related to display from Linux 4.4 for: - snow - peach_pit - peach_pi - spring Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.1 at 2024-09-14 00:50:32 +0000