summaryrefslogtreecommitdiff
path: root/arch/arm/dts
Commit message (Collapse)AuthorAgeLines
* ARM: tegra: pull Tegra210 SoC DT from Linux v4.7Stephen Warren2016-09-27-80/+613
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The primary benefit of this change is that it adds all missing clocks and resets properties to peripherals. This will allow peripheral drivers to migrate to the standard clock and reset APIs in the future. Main changes: * Brought in the correct Tegra210 CAR binding; the old file in U-Boot appears to be a renamed version of the Tegra124 bindings rather than the real Tegra210 version. * Conversion of SPI and UART nodes to standard DMA bindings. U-Boot doesn't use DMA so isn't affected. * Split of EHCI and USB PHY nodes. The EHCI nodes continue to contain all information required by U-Boot, so U-Boot is not affected. * Conversion of many magic numbers to named defines. * Addition of many nodes not used by U-Boot, including separation of the Tegra LIC (Legacy IRQ controller) and GIC. * Node sort order fixes. Remaining deltas relative to the Linux DT: * U-Boot has enabled PCIe for Tegra210, but the kernel hasn't yet. * The GPIO node compatible value in the kernel explicitly includes Tegra124 values whereas U-Boot does not. I'll send a kernel patch to correct this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pull Tegra124 SoC DT from Linux v4.7Stephen Warren2016-09-27-7/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | The primary benefit of this change is that it adds all missing clocks and resets properties to peripherals. This will allow peripheral drivers to migrate to the standard clock and reset APIs in the future. Main changes: * USB phy_type property is aligned with the kernel, so board files are updated so the final DT content doesn't change. I'm not convinved that Nyan uses HSIC phy_type. However, I'd rather this change be a no-op, and any DT bug-fixes be separate. * Sync misc changes from the kernel: missing DT content, minor compatible value fixes, typos. Remaining deltas relative to the Linux DT: * U-Boot uses #address-cells/#size-cells of 1 whereas the kernel uses 2. I believe U-Boot's DT parsing currently assumes that these values match the physical address size, so I didn't synchronize this part of the DT. * U-Boot uses the original XUSB PHY DT binding, wherease the kernel DT has moved to a newer version. Thus, XUSB client nodes include properties names phys and phy-names that do not appear in the kernel, and don't include pad definitions in the padctl node. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pull Tegra114 SoC DT from Linux v4.7Stephen Warren2016-09-27-129/+627
| | | | | | | | | | | | | | | | | | | | | | | | The primary benefit of this change is that it adds all missing clocks and resets properties to peripherals. This will allow peripheral drivers to migrate to the standard clock and reset APIs in the future. Main changes: * Conversion of SPI nodes to standard DMA bindings. U-Boot doesn't use DMA so isn't affected. * Split of EHCI and USB PHY nodes. The EHCI nodes continue to contain all information required by U-Boot, so U-Boot is not affected. * Boards need to define the clk32k_in clock that feeds the Tegra PMC. * Addition of tegra114-mc.h since tegra114.dtsi now includes it. * Conversion of many magic numbers to named defines. * Addition of many nodes not used by U-Boot. * Node sort order fixes. Remaining deltas relative to the Linux DT: * USB node compatible values in U-Boot explicitly list Tegra114 values whereas the kernel does not. I'll send a kernel patch to correct this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pull Tegra30 SoC DT from Linux v4.7Stephen Warren2016-09-27-143/+758
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The primary benefit of this change is that it adds all missing clocks and resets properties to peripherals. This will allow peripheral drivers to migrate to the standard clock and reset APIs in the future. Main changes: * Modification of PCIe memory region addresses. The HW memory layout is programmable, so this should work fine, and Beaver PCIe was tested without issue. * Removal of pcie_xclk from the PCIe node and clock binding header. This clock doesn't exist and isn't used; only a reset with this ID exists. * Conversion of SPI nodes to standard DMA bindings. U-Boot doesn't use DMA so isn't affected. * Split of EHCI and USB PHY nodes. The EHCI nodes continue to contain all information required by U-Boot, so U-Boot is not affected. * Changed the phy_type value for the second USB port. This required board DTs to be updated to keep the same configuration. * Boards need to define the clk32k_in clock that feeds the Tegra PMC. * Addition of tegra30-mc.h since tegra30.dtsi now includes it. * Conversion of many magic numbers to named defines. * Addition of many nodes not used by U-Boot. * Node sort order fixes. Remaining deltas relative to the Linux DT: * None. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pull Tegra20 SoC DT from Linux v4.7Stephen Warren2016-09-27-2/+2
| | | | | | | | | | | | | This brings in a few minor fixes since the last sync. The largest change is the removal of the definition for TEGRA20_CLK_PCIE_XCLK. This clock doesn't actually exist. Remaining deltas: * Addition of u-boot,dm-pre-reloc property to a couple of nodes. * Addition of the NAND controller, which Linux doesn't yet support. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: remove "0, " from DT unit addressesStephen Warren2016-09-27-82/+82
| | | | | | | | | Apparently the unit address in a DT node name is now supposed to be a single integer value, rather than a comma-separated list of individual cell values. Fix the U-Boot DTs to comply with this naming convention. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* mmc: tegra: use correct alias for SDHCI/MMC nodesStephen Warren2016-09-27-48/+48
| | | | | | | | | | | | | | | The Tegra MMC driver currently honors "sdhci" entries in /aliases. The MMC core however uses "mmc" entries in /aliases. This difference will be relevant once the Tegra MMC driver is converted to DM, and the MMC core handles alias lookups. To avoid issues during that conversion, fix the Tegra MMC driver and all Tegra DTs to use the same alias name as the MMC core does. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: fdt: Add 'non-removable' property to all eMMC nodesTom Warren2016-09-27-0/+13
| | | | | | | | | | | During debug of the DM_MMC changes to the Tegra MMC driver, I noticed that the 'removable' property wasn't being set correctly for the eMMC parts on most Tegra boards. Since the kernel DTS has this property set correctly, it should be in U-Boot's Tegra DT too. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-09-26-0/+305
|\ | | | | | | | | | | | | trini: Drop local memset() from examples/standalone/mem_to_mem_idma2intr.c Signed-off-by: Tom Rini <trini@konsulko.com>
| * armv8: ls1046aqds: Add LS1046AQDS board supportShaohui Xie2016-09-14-0/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1046AQDS Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: supports Gen 1 and Gen 2 SATA 3.0: one SATA 3.0 port USB 3.0: two micro AB connector and one type A connector UART: supports two UARTs up to 115200 bps for console Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046ardb: Add LS1046ARDB board supportMingkai Hu2016-09-14-0/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot SATA: * SerDes2 Lane3 to SATA port USB 3.0: one super speed USB 3.0 type A port one Micro-AB port UART: supports two UARTs up to 115200 bps for console Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | arm: mvebu: NAND support for DB-88F6820-AMCChris Packham2016-09-24-0/+8
| | | | | | | | | | | | | | Enable the NAND interface on this board. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: add DB-88F6820-AMC boardChris Packham2016-09-24-0/+156
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is a plug in card for Marvell's switch system development kits. Form-factor aside it is similar to the DB-88F6820-GP with the following differences. - TCLK is 200MHz - SPI1 is used - No SATA - No MMC - NAND flash Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge git://git.denx.de/u-boot-rockchipTom Rini2016-09-22-0/+96
|\ \
| * | dts: rk3399-evb: add regulator-fixed for usb host vbusKever Yang2016-09-22-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | rk3399 evb using one gpio to enable 5V output for both USB 2.0 host port, let's use fixed regulator for them. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | dts: rk3399: add dwc3_typec node for rk3399MengDongyang2016-09-22-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | rk3399 has two dwc3 controller for type-C port, add the dts node and enable them. Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | dts: rk3399: add pinctrl for sdmmcKever Yang2016-09-22-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | This patch add pinctrl for sdcard which may not be initialized before uboot. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | ARM: dts: uniphier: sync clock/reset controller nodes with LinuxMasahiro Yamada2016-09-23-181/+301
|/ / | | | | | | | | | | Sync device trees with Linux for easier DT life. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2016-09-18-0/+51
|\ \
| * | ARM: dts: uniphier: include System Bus pin group node in SPL DTMasahiro Yamada2016-09-18-0/+8
| | | | | | | | | | | | | | | | | | | | | This will be needed for setting up the System Bus pin-mux via the LD11/LD20 pinctrl driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: dts: uniphier: add pinctrl device node and pinctrl propertiesMasahiro Yamada2016-09-18-0/+43
| |/ | | | | | | | | | | DT-side updates to make pinctrl on sLD3 SoC really available. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | sunxi: Add defconfig and dts for the NanoPi NEOJelle van der Waa2016-09-18-1/+127
|/ | | | | | | | | The NanoPi NEO is a simple h3 board with 512MB RAM, ethernet, one usb and one usb OTG connector. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* arm: dts: update DTS files for meson-gxbb and odroid-c2Beniamino Galvani2016-09-06-1/+188
| | | | | | | Import DTS files and dt-bindings includes from Linux 4.8-rc1. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-09-06-51/+440
|\
| * sunxi: Add defconfig and dts file for the Orange Pi Plus2E SBCHans de Goede2016-09-03-1/+85
| | | | | | | | | | | | | | | | | | | | | | The Orange Pi Plus2E is an extended version of the Orange Pi Pc Plus, with 2G RAM and an external gbit ethernet phy. The dts file is identical to the one submitted to the upstream kernel, except that it has the pending patch to enable the ethernet controller squashed in, as u-boot already has sun8i-emac support. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Sync h3-orangepi dts files with kernelHans de Goede2016-09-03-47/+37
| | | | | | | | | | | | | | | | | | | | | | This adds an emac node to the orangepi-2 dts (not yet merged upstream, but in u-boot we already have emac support); fixes the alphetically sorting of nodes in sun8i-h3-orangepi-plus.dts and disables some usb controllers in sun8i-h3-orangepi-plus.dts which are only used on the plus2e, as upstream has decided to do a separate dts files for the plus2e. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Fix H3 EMAC syscon register addressChen-Yu Tsai2016-09-03-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The sun8i-emac driver follows an old version of the proposed DT bindings, where the EMAC clock and EPHY control register range is listed directly, rather than through a syscon phandle. Add back the syscon register range to avoid an invalid data access. We should fix the driver once the Linux kernel bindings have been finalized. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Add support for A33-OLinuXino boardStefan Mavrodiev2016-09-03-0/+227
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A33-OLinuXino is A33 development board designed by Olimex LTD. It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector, headphone and mic jacks, connector for LiPo battery and optional 4GB NAND Flash. It has two 40-pin headers. One for LCD panel, and one for additional modules. Also there is CSI/DSI connector. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: add proper device tree for iNet D978 rev2 boardsIcenowy Zheng2016-09-03-0/+89
| | | | | | | | | | | | | | | | Add a proper dts for the iNet D978 rev2 based A33 tablets. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | ARM: dts: dra72-evm: fix broken ethernetMugunthan V N2016-09-06-1/+1
|/ | | | | | | | | | | With commit ceec08f50b6, phy is connected to slave 0, but changing the phy node was missed, fix it by populating the phy node to proper cpsw slave node. Fixes: ceec08f50b6 ("ARM: dts: dra72-evm: Add mode-gpios entry for mac node") Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Cc: Vignesh R <vigneshr@ti.com> Tested-by: Tom Rini <trini@konsulko.com>
* ARM: tegra: Add support for TK1-SOM board from Colorado EngineeringPeter Chubb2016-09-01-0/+478
| | | | | | | | | | | | | | The Colorado TK1 SOM is a small form factor board similar to the Jetson TK1. The main differences lie in the pinmux, and in that the PCIe controller is set to use in 4lanes+1lane, rather than 2+2. The pinmux header here was generated from a spreadsheet provided by Colorado Engineering using the tegra-pinmux scripts. The spreadsheet was converted from v09 to v11 by me. Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: use numeric versioning for p2771-0000Stephen Warren2016-08-30-6/+6
| | | | | | | | | | | | | | | | | The board ID EEPROM and board ID stickers on p2771-0000 will use a numeric versioning scheme, with version numbers such as 000/100/200/300/400/500. Within NVIDIA, these versions are also known as A00/A01/A02/A03/A04/B00. However, that numbering scheme is not easily visible outside of NVIDIA, and so does not make much sense to use. Convert U-Boot to use the readily visible numeric scheme. Also, it turns out that the current A02 DT actually applies to board versions 000/100/200 (A00..A02). Consequently rename this to 000 not 200 so that all U-Boot builds are named after the first version of the HW they support. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2016-08-28-0/+9
|\
| * ARM: dts: uniphier: add u-boot, dm-pre-reloc to use eMMC boot on sLD3Masahiro Yamada2016-08-28-0/+9
| | | | | | | | | | | | | | The eMMC on sLD3 is assigned with dedicated pins (only multiplexed with GPIO), so it shouldn't hurt to enable eMMC on SPL all the time. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | sun5i: Add defconfig and dts file for the Empire Electronix M712 tabletHans de Goede2016-08-26-0/+52
| | | | | | | | | | | | | | | | | | | | | | Add a defconfig and dts file for the Empire Electronix M712 tablet, this is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV wifi chip and a DMART06 (1238a4) accelerometer. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Sync dts files with upstream kernelHans de Goede2016-08-26-2192/+3135
| | | | | | | | | | | | | | | | | | | | | | | | | | Sync dts files with the current (Aug 18th 2016) state of Maxime's linux/sunxi/for-next repo. Note this commit also updates configs/MSI_Primo81_defconfig, adding: "# CONFIG_REQUIRE_SERIAL_CONSOLE is not set", this is necessary because the tablet does not have a reachable uart so the dts sync drops its serial0 alias. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sun6i: Add defconfig and dts file for tablets using the inet-q972 PCBHans de Goede2016-08-26-0/+294
|/ | | | | | | | | | | | | | | Add a defconfig and dts file for tablets using the generic inet-q972 PCB. Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host, micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot, (mini) power-barrel and an usb wifi module. This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* ARM: tegra: remove stale nvidia, bpmp I2C DT propertyStephen Warren2016-08-25-1/+0
| | | | | | | | | | The nvidia,bpmp property is left over from an old BPMP I2C binding, and shouldn't be present. Remove it from the SoC DT file, and update the I2C driver not to parse it; the value wasn't used for anything any more anyway. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: fix Tegra186 SDHCI clock/reset namesStephen Warren2016-08-25-4/+2
| | | | | | | | | The Tegra SDHCI binding dictates that the reseet name for the Tegra SDHCI clock be "sdhci" not "sdmmc", and that the clock is accessed by index rather than by name. Fix the Tegra186 DT and MMC driver to honor this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: fix Tegra186 I2C clock nameStephen Warren2016-08-25-8/+8
| | | | | | | | The Tegra I2C binding dictates that the clock name for the Tegra I2C clock be "div-clk" not "i2c". Fix the Tegra186 DT and I2C driver to honor this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: dts: k2g-evm: enable mmc/sd suppportSekhar Nori2016-08-16-0/+8
| | | | | | | | | | | The K2G EVM from TI has an SD card slot as well as onboard eMMC for data storage. Enable support for these. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: dts: K2G: Add support for MMC controllerSekhar Nori2016-08-16-0/+23
| | | | | | | | | K2G SoC from TI has two MMC/SD controllers. Add device tree data for these. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-08-15-0/+1754
|\
| * ARM: at91/dt: Add device tree for SAMA5D2 XplainedWenyou Yang2016-08-15-0/+874
| | | | | | | | | | | | Add device tree for SAMA5D2 Xplained board. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
| * atmel: Bring in at91 pio4 device tree file and bindingsWenyou Yang2016-08-15-0/+880
| | | | | | | | | | | | | | | | Bring in required device tree file and bindings from Linux. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* | ARM: tegra: enable PCIe controller on p2771-0000Stephen Warren2016-08-15-0/+38
| | | | | | | | | | | | | | | | | | | | | | p2771-0000 has a couple of PCIe ports; one physically x4 desktop PCI connector (which may run at x2 electrically, depending on the board version and configuration) and a x1 connection to the M.2 slot (which may not be active, depending on the board version and configuration). This change enables those. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: enable SD card on p2771-0000Stephen Warren2016-08-15-0/+24
| | | | | | | | | | | | | | | | | | | | Now that clock and reset drivers exist for Tegra186, we can enable the SD card controller. Now that a BPMP I2C driver exists for Tegra186, we can communicate with the PMIC to enable power to the SD card. Hook up the DT content and board code required to make the SD card work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: enable I2C buses for P2771-0000Bryan Wu2016-08-15-0/+35
|/ | | | | | | | | | Enable I2C devices in DT and enable building tegra_i2c.c driver. Signed-off-by: Bryan Wu <pengw@nvidia.com> (swarren, commit msg rework, fixed DT node sort order) Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: dts: dra7xx-evm: add evm_3v3_sd regulatorVignesh R2016-08-12-2/+22
| | | | | | | | | | Add a node for evm_3v3_sd using onboard PCF GPIO expander which feeds on to mmc vdd. Update mapping for vmmc-supply and vmmc_aux-supply. evm_3v3_sd supplies to SD card vdd, and ldo1 to sdcard i/o lines. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-08-11-1/+1
|\
generated by cgit v1.1 at 2024-11-08 05:15:34 +0000