summaryrefslogtreecommitdiff
path: root/arch/arm/dts
Commit message (Collapse)AuthorAgeLines
...
* ARM: zynq: Enable u-boot,dm-pre-reloc for sdhciMichal Simek2015-12-18-0/+6
| | | | | | | | Enable u-boot,dm-pre-reloc for sdhci for zc706, zed and zybo. And create aliases for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sunxi: Add suport for A83T HomletV2 Board by Allwinnervishnupatekar2015-12-10-0/+66
| | | | | | | | | | | | Add dts and defconfig for h8homletv2 board. H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner. It has UART, ethernet, USB, HDMI, etc ports on it. A83T patches are tested on this board. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: dts: sun8i: Add Allwinner A83T dtsivishnupatekar2015-12-10-0/+247
| | | | | | | | | | | | Allwinner A83T is new octa-core cortex-a7 SOC. This adds the basic dtsi, the clocks differs from earlier sun8i SOCs. This is not yet included in kernel. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-12-07-0/+3
|\
| * zynq: sdhci: Move driver to DMMichal Simek2015-12-07-0/+3
| | | | | | | | | | | | | | Move driver to DM Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | arm: socfpga: Add SoCFPGA SR1500 boardStefan Roese2015-12-07-1/+104
|/ | | | | | | | | | | | | | | The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
* arm: dts: dra7-evm: add chosen node to specify serial console deviceMugunthan V N2015-12-05-0/+4
| | | | | | | Introduce chosen node and specify uart0 to be used as serial console. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: dts: omap: add reg-shift to serial device tree nodeMugunthan V N2015-12-05-0/+22
| | | | | | | | | | | | | | With the commit 'c7b9686d5d48 ("ns16550: unify serial_omap")' all TI platforms are broken with DM/DT boot as ns16550 driver expects reg-shift from DT which is not populated for TI platforms. Earlier it worked as it was hard coded to 2 in serial-omap driver. So adding the reg-shift to serial nodes for dra7, am4372 and am33xx dtsi files. Tested this patch on am437x-sk-evm, am437x-gp-evm, am335x-boneblack, dra74x-evm and dra72x-evm. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Thomas Chou <thomas@wytron.com.tw>
* rockchip: Add basic support for evb-rk3036 boardhuang lin2015-12-01-1/+48
| | | | | | | | | | | | | | This add some basic files required to allow the board to dispaly serial message and can run command(mmc info etc) Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Moved board Kconfig fragment from previous patch into this one to fix build error: Signed-off-by: Simon Glass <sjg@chromium.org> Series-changes: 8 - moved board Kconfig fragment from previous patch into this one
* rockchip: mmc: get the fifo mode and fifo depth property from dtshuang lin2015-12-01-0/+1
| | | | | | | | rk3036 mmc do not have internal dma, so we use fifo mode when read and write data, we get the fifo mode and fifo depth property from dts, pass to dw_mmc driver. Signed-off-by: Lin Huang <hl@rock-chips.com>
* rockchip: Bring in RK3036 device tree file includes and bindingshuang lin2015-12-01-0/+427
| | | | | | | | | Since rk3036 device tree file still in reviewing, bring it from https://patchwork.kernel.org/patch/7203371/ and add some aliases we need in uboot Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-11-30-12/+427
|\
| * armv8/ls1043ardb: add DSPI supportGong Qianyu2015-11-30-0/+45
| | | | | | | | | | | | | | | | Use the U-Boot Driver Model. Just enable Freescale DSPI driver and set DSPI related parameters in dts file. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/ls1043aqds: dts: add dtb supportGong Qianyu2015-11-30-1/+126
| | | | | | | | | | | | | | Reuse the dts files from ls1043a linux kernel. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/ls1043ardb: dts: add dtb supportGong Qianyu2015-11-30-0/+245
| | | | | | | | | | | | | | | | Reuse dts files from ls1043a linux kernel. Some parts in dts files may not be needed by U-Boot. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8: LS2080A: Rename LS2085A to reflect LS2080APrabhakar Kushwaha2015-11-30-12/+12
| | | | | | | | | | | | | | | | | | | | | | LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun <yorksun@freescale.com>
* | arm: socfpga: dts: Adding drvsel and smplsel to dtsChin Liang See2015-11-30-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding new node drvsel and smplsel for SDMMC Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
* | arm: socfpga: Repair SoCrates boardMarek Vasut2015-11-30-0/+5
|/ | | | | | | | | | | | | | This board was constantly parasiting on the CV SoCDK, so split it into it's own separate directory. Moreover, the board config was missing important bits, like simple-bus support in SPL, the DRAM configuration was incorrect and the DTS was also missing the pre reloc bits. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Jan Viktorin <viktorin@rehivetech.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-11-22-0/+1123
|\
| * sunxi: Add support for the Lamobo R1 boardJelle de Jong2015-11-22-0/+298
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. The dts file is identical to the one submitted upstream. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Add H3 dts[i] filesHans de Goede2015-11-22-0/+825
| | | | | | | | | | | | | | | | These files are based on the current latest upstream kernel work. The bus_gates bindings may still change, but for u-boot that does not matter as we do not (yet) use any clock info from devicetree for sunxi u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | ns16550: unify serial_rockchipThomas Chou2015-11-21-0/+5
|/ | | | | | | | | Unify serial_rockchip, and use the generic binding. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Acked-by: Simon Glass <sjg@chromium.org>
* ARM: tegra: enable PCI support of p2371-2180Stephen Warren2015-11-12-0/+50
| | | | | | | | | | p2371-2180 has two PCI ports; a regular x4 slot and a x1 M.2 slot. This patch adds the relevant DT to enable the PCI controller and configure the XUSB padctl pin muxing, and code to turn on the PCI power and enable PCI features in U-Boot. I have only tested the x4 slot. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: add PCI to Tegra210 SoC DTStephen Warren2015-11-12-0/+66
| | | | | | | | | | Tegra210's PCI controller is largely identical to Tegra124, and hence shares the same binding. However, it has a unique compatible value due to the existence of at least one new HW bug that would prevent any driver for a previous HW version from operating correctly. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: dts: uniphier: add USB xHCI nodes for PH1-Pro5 and ProXstream2Masahiro Yamada2015-11-11-0/+60
| | | | | | | This makes USB3.0 available on new SoCs/boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARM: dts: uniphier: fix interrupt number of USB core for PH1-Pro4Masahiro Yamada2015-11-11-1/+1
| | | | | | | The IRQ is not used in U-Boot, but this would be useful to sync device trees between Linux and U-Boot. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-10-0/+4
| | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-samsungTom Rini2015-11-05-0/+20
|\
| * Odroid-XU3: dts: enable ADC, with request for pre-reloc bindPrzemyslaw Marczak2015-11-02-0/+5
| | | | | | | | | | | | | | | | | | | | | | This ADC is required for Odroid's board revision detection. The pre-reloc request is enabled, since board detection will be done in one of early function call. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos54xx: dts: add ADC nodePrzemyslaw Marczak2015-11-02-0/+7
| | | | | | | | | | | | | | | | | | | | This commit adds common ADC node, which is disabled as default. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Odroid-XU3: enable s2mps11 PMIC supportPrzemyslaw Marczak2015-11-02-0/+7
| | | | | | | | | | | | | | | | Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Peach-Pi: dts: add cpu-model stringPrzemyslaw Marczak2015-11-02-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This platform is based on Exynos5800 but the cpu id is 0x5422. This doesn't fit the common Exynos SoC name convention, so now, the CPU name is defined by device tree string, to be printed properly. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-11-05-1/+1
|\ \
| * | arm: dts: socfpga: Increase the spi-max-frequency for QSPI flashChin Liang See2015-11-05-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With a working QSPI calibration, the SCLK can now run up to 100MHz Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Vikas Manocha <vikas.manocha@st.com> Cc: Jagannadh Teki <jteki@openedev.com> Cc: Pavel Machek <pavel@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | arm: zynq: dts: Add U-Boot device tree additionsSimon Glass2015-11-04-0/+19
| | | | | | | | | | | | | | | | | | We need to mark some device tree nodes so that they are available before relocation. This enables driver model to find these automatically. In the case of SPL it ensures that these nodes will be retained in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | ARM: zynqmp: Add DTS for ep108 boardMichal Simek2015-11-04-0/+963
|/ | | | | | | Add DTS for ep108 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: u-boot
* dts: zed: Enable zynq qspi controller nodeJagan Teki2015-10-25-0/+5
| | | | | | | | | Enabled zynq qspi controller node for zed board. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* dts: zc770-xm010: Enable zynq qspi controller nodeJagan Teki2015-10-25-1/+6
| | | | | | | | | | | | Enabled zynq qspi controller node for zc770-xm010 board. => sf probe 0 -- bus1 for selecting qspi controller => sf probe 1 -- bus0 for selecting spi controller Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* dts: zc706: Enable zynq qspi controller nodeJagan Teki2015-10-25-0/+5
| | | | | | | | | Enabled zynq qspi controller node for zc706 board. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* dts: zc702: Enable zynq qspi controller nodeJagan Teki2015-10-25-0/+5
| | | | | | | | | Enabled zynq qspi controller node for zc702 board. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* dts: microzed: Enable zynq qspi controller nodeJagan Teki2015-10-25-0/+5
| | | | | | | | | | | Enabled zynq qspi controller node for microzed board, verified the same on spansion spi-nor flash. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Jagan Teki <jteki@openedev.com>
* dts: zynq: Add zynq qspi controller nodesJagan Teki2015-10-25-0/+12
| | | | | | | | | | This patch adds zynq qspi controller nodes in zynq-7000.dtsi. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Jagan Teki <jteki@openedev.com>
* am437x: Add am57xx_evm_defconfig using CONFIG_DMMugunthan V N2015-10-22-0/+700
| | | | | | | | | Import various DT files for am57xx-beagle-x15 from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* am437x: Add am437x_sk_evm_defconfig using CONFIG_DMMugunthan V N2015-10-22-1/+705
| | | | | | | | | Import various DT files for am437x-sk-evm from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* am437x: Add am437x_gp_evm_defconfig using CONFIG_DMMugunthan V N2015-10-22-0/+2554
| | | | | | | | | | Import various DT files for am4372, an43xx pinctrl and am437x-gp-evm from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* dra7xx: Add dra74_evm_defconfig using CONFIG_DMMugunthan V N2015-10-22-1/+784
| | | | | | | | Import various DT files for dra7-evm from Linux Kernel v4.2 Add config file for this board, enable DM and DM_GPIO Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: dts: k2g: Add DT supportLokesh Vutla2015-10-22-1/+95
| | | | | | Add basic DT support for k2g evm. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: k2e: Enable OF_CONTROL and DMLokesh Vutla2015-10-22-1/+586
| | | | | | | Import k2e specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: k2l: Enable OF_CONTROL and DMLokesh Vutla2015-10-22-1/+696
| | | | | | | Import k2l specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: k2hk: Enable OF_CONTROL and DMLokesh Vutla2015-10-22-0/+935
| | | | | | | Import k2hk specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit v1.1 at 2024-11-07 21:47:19 +0000