summaryrefslogtreecommitdiff
path: root/arch/arm/dts
Commit message (Collapse)AuthorAgeLines
...
* | ARM: tegra: add I2C controllers to Tegra186 DTBryan Wu2016-08-04-0/+104
| | | | | | | | | | | | | | | | | | | | | | Tegra186 has 8 I2C controllers including BPMP I2C. This patch adds the other 7 generic controllers to Tegra186's DT. Signed-off-by: Bryan Wu <pengw@nvidia.com> (swarren, fixed DT node sort order, tweak patch description) Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: add PCIe controller to Tegra186 SoC DTStephen Warren2016-08-04-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Tegra186 PCIe DT content is almost identical to previous chips, except that the: - There are 3 ports instead of 2. - Some physical addresses have moved. - PHY programming is handled by firmware, so CCPLEX DTs don't need to reference any PHY. - The power domain is explicitly represented in DT. This change is mandatory for Tegra186 since standard power domain APIs are used, and should be made to the DT for older SoCs, although we get away without doing so since U-Boot currently uses custom APIs that hard-code power domain IDs. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: add BPMP I2C to Tegra186 device treeStephen Warren2016-08-04-0/+9
| | | | | | | | | | | | | | | | | | This allows the BPMP I2C device to be instantiated, which makes it available to other drivers and the user. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: add BPMP and dependencies to Tegra186 DTStephen Warren2016-08-04-2/+53
| | | | | | | | | | | | | | | | | | This adds the DT content that's needed to allow board DTs to enable use of BPMP, clocks, resets, GPIOs, eMMC, and SD cards. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: adapt to latest HSP DT bindingStephen Warren2016-08-04-7/+3
|/ | | | | | | | | | The DT binding for the Tegra186 HSP module apparently wasn't quite final when I posted initial U-Boot support for it. Add the final DT binding doc and adapt all code and DT files to match it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodesMichal Simek2016-08-01-0/+2
| | | | | | | | | | | | | | | Serial driver is getting clk information via DT that's why also clk node needs to have this flag. Different behavior was introduced by: "dm: Use dm_scan_fdt_dev() directly where possible" (sha1: 911954859d6dece49c3e4835faea004cfe392506) where simple-bus driver starts to call dm_scan_fdt_dev() which has additional logic around pre_reloc_only parameter which exclude clk nodes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2016-07-31-1/+1066
|\
| * rockchip: add support for rk3288 PopMetal boardjk.kernel@gmail.com2016-07-31-0/+582
| | | | | | | | | | | | | | | | | | PopMetal is a rockchip rk3288 based board made by ChipSpark, which has many interface such as HDMI, VGA, USB, micro-SD card, WiFi, Audio and Gigabit Ethernet. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * rockchip: add basic support for fennec-rk3288 boardjk.kernel@gmail.com2016-07-31-0/+482
| | | | | | | | | | | | | | | | | | | | Fennec is a RK3288-based development board with 2 USB ports, HDMI, micro-SD card, audio and WiFi and Gigabit Ethernet. It also includes on-board 8GB eMMC and 2GB of SDRAM. Expansion connectors provides access to display pins, I2C, SPI, UART and GPIOs. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * rockchip: add a dummy byte for the sdram-channel propertyjk.kernel@gmail.com2016-07-31-1/+2
| | | | | | | | | | | | | | | | Add an extra byte so that this data is not byteswapped. Signed-off-by: Ziyuan Xu <jk.kernel@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
* | sunxi: Re-enable h3 emac supportHans de Goede2016-07-31-0/+11
|/ | | | | | | | | | | | | | With the recent bug fixes for the sun8i_emac driver all known issues are resolved, so we can re-enable the driver. While at it, also enable the emac on the Orange Pi One. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Jagan Teki <jteki@openedev.com>
* ARM: dts: am57xx-idk-common: Enable support for QSPIVignesh R2016-07-30-0/+49
| | | | | | | | | | | AM571x and AM572x IDK have a spansion s25fl256s QSPI flash on the board connected to TI QSPI over CS0. Hence, add QSPI and flash slave DT nodes. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* ARM: dts: dra7xx: Update spi-max-frequency for QSPIVignesh R2016-07-30-2/+2
| | | | | | | | | | | According to AM572x DM SPRS953A, QSPI max bus speed is 76.8MHz. Therefore update the spi-max-frequency value of QSPI node for DRA74 and DRA72 evm. This increase flash read speed by ~2MB/s. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-07-26-0/+92
|\
| * sunxi: Add EMAC ethernet0 alias for H3 dtsiChen-Yu Tsai2016-07-26-0/+4
| | | | | | | | | | | | | | | | | | | | The sunxi ethernet address generation code looks for ethernet[0-3] aliases to find ethernet controllers to generate MAC addresses for. Without a valid address, the driver fails to register. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Add defconfig and dts file for the Orange Pi PC Plus SBCHans de Goede2016-07-26-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a new Orange Pi PC *Plus* version available now, this is an extended version of the regular Orange Pi PC with sdio wifi and an eMMC. The upstream kernel devs have decided that they want a separate dts for the PC Plus rather then sharing a single dts between the regular PC and the PC Plus. So add a new orangepi_pc_plus_defconfig to match. The added dts file matches the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | dts: add support for Rockchip rk3399 socKever Yang2016-07-25-1/+1134
| | | | | | | | | | | | | | | | | | | | | | These files are from kernel upstream: "649a371 Add linux-next specific files for 20160616" with some modification need by U-Boot: - chosen with stdout-path to uart2. - add clock-frequency for uart2 Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: rk3288: add fastboot supportXu Ziyuan2016-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Enable fastboot feature on rk3288. This path doesn't support the fastboot flash function command entirely. We will hit "cannot find partition" assertion without specified partition environment. Define gpt partition layout in specified board such as firefly-rk3288, then enjoy it! Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: add basic support for evb-rk3288 boardXu Ziyuan2016-07-25-0/+439
|/ | | | | | | | | | | | | | evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sunxi: Enable NAND controller on the CHIPBoris Brezillon2016-07-24-0/+44
| | | | | | | Enable the NAND controller in the sun5i-r8-chip.dts. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
* sun5i: Add NAND controller to the sun5i DTSIMaxime Ripard2016-07-24-0/+49
| | | | | | | Add the NAND controller definition to sun5i.dtsi. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* ARM: dts: uniphier: renumber serial aliases for Gentil/Vodka boardsMasahiro Yamada2016-07-23-8/+8
| | | | | | | | | | | | On these two boards, the serial0 is used for inter-chip connection, so cannot be used for login console. The serial2 is used instead for them, but it is tedious to use because upper level deployment projects must switch login console per board. [ Linux commit: 2a4a2aadbaad9dffdb564a2895348f3d8e825416 ] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: tegra: split p2771-0000 buildStephen Warren2016-07-21-3/+18
| | | | | | | | | | | | | | | There are multiple versions of p2771-0000 board. There are SW visible incompatible differences between the versions, and they are relevant to U-Boot. Create separate "A02" and "B00" defconfigs (named after the first and/or only board rev the defconfig supports) so that users can select which build they want. With the minimal set of HW currently enabled in U-Boot, the differences are irrelevant, hence the DT files aren't different. However, that will change in a future patch. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: fix Tegra186 DT GPIO binding headerStephen Warren2016-07-21-1/+1
| | | | | | | | Tegra186 uses different GPIO port IDs compared to previous chips. Make sure the SoC DT file includes the correct GPIO binding header. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-07-15-100/+312
|\
| * sunxi: Add defconfig and dts file for the Orange Pi Lite SBCHans de Goede2016-07-15-0/+179
| | | | | | | | | | | | | | | | | | | | | | The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Sync sun8i-h3-orangepi-plus.dts with upstreamHans de Goede2016-07-15-100/+37
| | | | | | | | | | | | | | | | This enables extra USB controllers which enable use of the 3rd USB port on the new Orange Pi Plus 2E variant. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * net: Add EMAC driver for H3/A83T/A64 SoCs.Amit Singh Tomar2016-07-15-0/+96
| | | | | | | | | | | | | | | | | | | | | | This patch add EMAC driver support for H3/A83T/A64 SoCs. Tested on Pine64(A64-External PHY) and Orangepipc(H3-Internal PHY). BIG Thanks to Andre for providing some of the DT code. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2016-07-15-10/+10
|\ \
| * | ARM: exynos4: dts: add the prefix '/' for aliases nodesJaehoon Chung2016-07-12-10/+10
| | | | | | | | | | | | | | | | | | | | | It's correct to use '/' as prefix for aliases nodes. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | rockchip: Update the sdram-channel property to support of-platdataSimon Glass2016-07-14-1/+2
| |/ |/| | | | | | | | | | | Add an extra byte so that this data is not byteswapped. Add a comment to the code to explain the purpose. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-07-11-11/+143
|\ \ | |/ |/|
| * ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHzVignesh R2016-07-09-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | According to Data Manual(SPRS915P) of AM57x, TI QSPI controller on DRA74(rev 1.1+)/DRA72 EVM can support up to 64MHz in MODE-0, whereas MODE-3 is limited to 48MHz. Hence, switch to MODE-0 for better throughput. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: K2G: Add support for QSPI controllerVignesh R2016-07-09-0/+59
| | | | | | | | | | | | | | | | | | | | | | K2G SoC has a Cadence QSPI controller to communicate with NOR flash devices. Add DT nodes to support the same. Also, K2G EVM has a s25fl512s flash connect to QSPI bus at CS 0. Add nor flash slave node for the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2g: add support for Davinci SPI controllerVignesh R2016-07-09-0/+71
| | | | | | | | | | | | | | | | | | | | | | K2G SoC has 4 SPI instances that are compatible with davinci_spi controller(present on previous generation of Keystone2 devices). Add DT nodes for the same. K2G EVM has a N25Q128A13 SPI NOR flash connected on SPI-1. Add DT bindings for the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2l: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2e: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: k2hk: Enable Davinci SPI controllerVignesh R2016-07-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | Now that davinci_spi driver has been converted to DM framework, enable the same in DT. Also add "spi-flash" as compatible property to n25q128a11 node as it is required for flash device to be probed in U-Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: dts: keystone2: add SPI aliases for davinci SPI nodesVignesh R2016-07-09-0/+3
| | | | | | | | | | | | | | | | | | Add aliases for SPI nodes in order for it to be probed by the DM framework. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | video: tegra: Move to using simple-panel and pwm-backlightSimon Glass2016-07-05-72/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have standard drivers for panels and backlights which can do most of the work for us. Move the tegra20 LCD driver over to use those instead of custom code. This patch includes device tree changes for the nvidia boards. I have only been able to test seaboard. If this patch is applied, these boards will also need to be synced with the kernel, and updated to use display-timings: - colibri - medcom-wide - paz00 - tec Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: dts: Sync tegra20 device tree files with LinuxSimon Glass2016-07-05-73/+2154
|/ | | | | | | | Sync everything except the display panel, which will come in a future patch. One USB port is left disabled since we don't want to support it in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* sunxi: Add defconfig and DTS file for Allwinner R16 EVB (Parrot)Quentin Schulz2016-07-02-1/+350
| | | | | | | | | | | | | | | The Parrot Board is an evaluation board with an Allwinner R16 (assumed to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2 controllable buttons, an LVDS port with separated backlight and capacitive touch panel ports, an audio/microphone jack, a camera CSI port, 2 sets of 22 GPIOs and an accelerometer. The DTS file is identical to the one submitted to the upstream kernel. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: dts: uniphier: add AIDET nodesMasahiro Yamada2016-07-02-0/+40
| | | | | | | The AIDET (ARM Interrupt Detector Add-on Circuit) is a kind of syscon block related with the interrupt controller. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: dts: uniphier: sync Device Trees with upstream LinuxMasahiro Yamada2016-07-02-138/+99
| | | | | | I periodically sync Device Trees for better maintainability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-06-28-105/+0
|\
| * armv8: dts: fsl: Remove cpu nodes from Layerscape DTSIsAbhimanyu Saini2016-06-28-105/+0
| | | | | | | | | | | | | | | | | | | | | | | | Currently layescape SoCs are not using cpu nodes. So removing them in favour of compatibly with similar SoCs that have different cores like LS2080A and LS2088A. This has been tested on LS2080AQDS, LS1043ARDB, LS1012ARDB. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | arm: at91: taurus/axm: add DM and DTS supportHeiko Schocher2016-06-26-0/+120
| | | | | | | | | | | | | | | | | | | | add DM and DTS support for the at91 based siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: at91: smartweb: add DM and DTS supportHeiko Schocher2016-06-26-1/+112
| | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: at91: dts: Bring in dts files for AT91SAM9G20 and SAM9260Heiko Schocher2016-06-26-0/+3012
| | | | | | | | | | | | | | | | | | Add this files from Linux v4.6-rc5 66b8a424d: [workqueue: fix ghost PENDING flag while doing MQ IO] Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Andreas Bießmann <andreas@biessmann.org>
* | corvus DTS / DM supportHeiko Schocher2016-06-26-1/+111
|/ | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebase on current ToT, don't delete gurnard DTB creation] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
generated by cgit v1.1 at 2024-11-08 12:46:27 +0000