summaryrefslogtreecommitdiff
path: root/arch/arm/dts
Commit message (Collapse)AuthorAgeLines
* MLK-14420-2 DTS: add DTS file for imx6q sabresd boardYe Li2017-03-14-0/+1123
| | | | | | Copy the dts and dtsi files from kernel to support imx6q sabresd board. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14420-1 DTS: Update imx6qdl relevant dts and clock definitionsYe Li2017-03-14-418/+451
| | | | | | Get the latest dtsi files and clock.h for imx6qdl from kernel Signed-off-by: Ye Li <ye.li@nxp.com>
* ARM: dts: uniphier: drop u-boot, dm-pre-reloc from system-bus pinctrl nodeMasahiro Yamada2017-02-23-8/+0
| | | | | | | | Since commit 26b09c022ab6 ("ARM: uniphier: move SBC and Support Card init code to U-Boot proper"), SPL does not need pin-mux settings for the System Bus. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2017-02-11-59/+59
|\
| * rockchip: rename miniarm to tinker boardEddie Cai2017-02-09-4/+4
| | | | | | | | | | | | | | | | Miniarm is the internal project code. Now it is officially named Tinker board. So rename it. Signed-off-by: Eddie Cai <eddie.cai@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * rockchip: dts: rk3288: correct sdram setting for miniarmJacob Chen2017-02-09-8/+8
| | | | | | | | | | | | | | | | | | | | | | miniarm board use lpddr3 Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Added 'rockchip:' prefix to subject: Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: I84c3679dab2dbd8d01c1ebfd22220946d07c03cd
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2017-02-09-2/+2
|\ \
| * | net: phy: dp83867: Add support for MAC impedance configurationMugunthan V N2017-02-07-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for programmable MAC impedance configuration and fix typo in DT impedance parameters names. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | arm: dts: trats: add the pmic node for using DMJaehoon Chung2017-02-09-8/+142
| |/ |/| | | | | | | | | | | | | To use driver-model adds the pmic node for max8997. This is used as kernel device-tree in Linux. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | ARM: dts: k2*: Rename the k2* files to keystone-k2* filesLokesh Vutla2017-02-08-20/+20
|/ | | | | | | | | | | | | | | | | | | | | | As reported in [1], rename the k2* dts files to keystone-* files this will force consistency throughout. Script for the same (and hand modified for Makefile and config files): for i in arch/arm/dts/k2* do b=`basename $i`; git mv $i arch/arm/dts/keystone-$b; sed -i -e "s/$b/keystone-$b/g" arch/arm/dts/*[si] done This is similar to linux kernel commit 5edafc29829bc ("ARM: dts: k2*: Rename the k2* files to keystone-k2* files") [1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-02-03-0/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/ls1046aqds_defconfig configs/ls1046aqds_nand_defconfig configs/ls1046aqds_qspi_defconfig configs/ls1046aqds_sdcard_ifc_defconfig configs/ls1046aqds_sdcard_qspi_defconfig configs/ls1046ardb_emmc_defconfig configs/ls1046ardb_qspi_defconfig configs/ls1046ardb_sdcard_defconfig
| * armv8: ls1046a: added usb nodes in dtsTang Yuantian2017-01-27-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | The LS1046A processor has three integrated USB 3.0 controllers (USB1, USB2, and USB3) that allow direct connection to the USB ports with appropriate protection circuitry and power supplies. USB1 and USB2 ports are powered by a NX5P2190UK device, which supplies 5v power at up to 1.2 A. The power enable and power-fault-detect pins are connected to the LS1046A processor via CPLD for individual port management. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-02-01-10/+3055
|\ \
| * | arm: dts: imx53-cx9020: fix packetloss on fec_mxcPatrick Bruenn2017-01-30-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pinmuxing for i.MX53 FEC ethernet copied from <kernel>/arch/arm/boot/dts/imx53-qsb-common.dtsi (at least until v4.9) was bad. It is different from the manual pinmuxing in <u-boot>/board/freescale/mx53loco/mx53loco.c which was used in cx9020 implementation previously before mainlining into u-boot. It seems the bug in imx53-qsb kernel device tree is hidden for so long, because it was never used, by the kernel driver. Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
| * | imx: dts: mx6sxsabreauto: enable i2c2/3Peng Fan2017-01-27-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | Enable i2c2/3, add pinctrl settings. Add max7310 for i2c3. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6sx: add dts for mx6sxsabreauto boardPeng Fan2017-01-27-0/+3003
| |/ | | | | | | | | | | | | | | Add dts for mx6sxsabreauto board. dts related files imported fro Linux (commit e5517c2a5a4). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | ARM: DTS: stm32: add stm32f746-disco device tree filesMichael Kurz2017-01-28-0/+202
| | | | | | | | | | | | | | | | | | | | | | This patch adds the DTS source files needed for stm32f746-disco board The files are based on the stm32f429/469 files from current linux kernel. Source for "arch/arm/dts/armv7-m.dtsi": Linux: "arch/arm/boot/dts/armv7-m.dtsi" Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
* | aspeed: Support for ast2500 Eval Boardmaxims@google.com2017-01-28-0/+25
| | | | | | | | | | ast2500 Eval Board device tree and board specific configuration. Reviewed-by: Simon Glass <sjg@chromium.org>
* | aspeed: Add basic ast2500-specific drivers and configurationmaxims@google.com2017-01-28-0/+227
|/ | | | | | | | | | | | | | | | | | | | | Clock Driver This driver is ast2500-specific and is not compatible with earlier versions of this chip. The differences are not that big, but they are in somewhat random places, so making it compatible with ast2400 is not worth the effort at the moment. SDRAM MC driver The driver is very ast2500-specific and is completely incompatible with previous versions of the chip. The memory controller is very poorly documented by Aspeed in the datasheet, with any mention of the whole range of registers missing. The initialization procedure has been basically taken from Aspeed SDK, where it is implemented in assembly. Here it is rewritten in C, with very limited understanding of what exactly it is doing. Reviewed-by: Simon Glass <sjg@chromium.org>
* arm64: mvebu: Armada 7040-db: Add SDHCI device tree nodesStefan Roese2017-01-25-0/+14
| | | | | | | | | | | | | | | This patch adds the SDHCI device tree nodes to the Armada 7040-db dts file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
* arm64: mvebu: Armada 7k/8k: Add SDHCI device tree nodesStefan Roese2017-01-25-0/+16
| | | | | | | | | | | | | | | This patch adds the SDHCI device tree nodes to the Armada AP806 dtsi file which is used by the Armada 7k/8K SoCs. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
* arm64: mvebu: Armada 3720-db: Add SDHCI device tree nodesStefan Roese2017-01-25-0/+21
| | | | | | | | | | | | | | | This patch adds the SDHCI device tree nodes to the Armada 3700-db dts file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
* arm64: mvebu: Armada 3700: Add SDHCI device tree nodesStefan Roese2017-01-25-0/+16
| | | | | | | | | | | | | | | This patch adds the SDHCI device tree nodes to the Armada 3700 dtsi file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
* ARM: dts: uniphier: add PXs3 SoC/board supportMasahiro Yamada2017-01-22-0/+381
| | | | | | Initial commit for the PXs3 SoC DT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: dts: uniphier: compile only DT files that make senseMasahiro Yamada2017-01-22-9/+18
| | | | | | | | | All the UniPhier DT files are compiled if CONFIG_ARCH_UNIPHIER is enabled, but not all of them actually work. For example, when U-Boot is compiled for ARM 32 bit, 64 bit DT files are also built, and vice versa. Compile only the combination that makes sense. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-01-19-0/+232
|\
| * armv8: ls1012a: add eSDHC nodesYangbo Lu2017-01-18-0/+16
| | | | | | | | | | | | | | This patch is to add eSDHC nodes for ls1012a. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1012: added usb nodes in dtsTang Yuantian2017-01-18-0/+15
| | | | | | | | | | | | | | | | | | | | The LS1012A processor has two integrated USB controllers. One is USB2.0 controller, the other is USB3.0 controller that allow direct connection to the USB ports with appropriate protection circuitry and power supplies. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080a: add PCIe dts nodeMinghuan Lian2017-01-18-0/+60
| | | | | | | | | | | | Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046a: add PCIe dts nodeMinghuan Lian2017-01-18-0/+49
| | | | | | | | | | | | Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1043a: add PCIe dts nodeMinghuan Lian2017-01-18-0/+46
| | | | | | | | | | | | Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: ls1012a: add PCIe dts nodeMinghuan Lian2017-01-18-0/+15
| | | | | | | | | | | | Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: ls1021a: add PCIe dts nodeMinghuan Lian2017-01-18-0/+31
| | | | | | | | | | | | Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge git://git.denx.de/u-boot-samsungTom Rini2017-01-18-9/+184
|\ \
| * | ARM: dts: exnyos4210-universl_c210: add i2c_5 and pmic nodesJaehoon Chung2017-01-18-0/+164
| | | | | | | | | | | | | | | | | | | | | | | | Add the i2c_5 node and pmic as its child node. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | ARM: dts: exynos4: use the node's name for i2cJaehoon Chung2017-01-18-8/+19
| | | | | | | | | | | | | | | | | | | | | Use the node's name for i2c. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | board: samsung: goni: fix the pmic's name for gettingJaehoon Chung2017-01-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Getting from uclass, use the "max8998-pmic" as name. It also needs to change the dt-node's name as "max8998-pmic". Otherwise, it doesn't find the pmic device. Because it's only searching for 'max8998_pmic'. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | ARM: dts: uniphier: add UniPhier specific compatible to eMMC nodeMasahiro Yamada2017-01-17-4/+2
| | | | | | | | | | | | | | | | | | | | | The "cdns,sd4hc" is a fallback of the IP. Add the SoC-specific compatible string. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | sunxi: dts: OrangePi Zero: add Ethernet nodeAndre Przywara2017-01-15-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OrangePi Zero can happily use the EMAC along with its integrated PHY to use Ethernet (for TFTP booting, for instance). Add the emac node to the board .dts by copying it from the OrangePi One DT. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | | sunxi: add proper device tree for Orange Pi Zero boardsIcenowy Zheng2017-01-15-0/+144
| | | | | | | | | | | | | | | | | | | | | | | | Add a proper device tree file for Orange Pi Zero boards from Xunlong, which come with a Allwinner H2+ SoC (similar to H3). Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | | sunxi: enable H3 EMAC for the nanopi neoJelle van der Waa2017-01-15-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | The nanopi already had the CONFIG_SUN8I_EMAC=y enabled in it's defconfig file, but was missing the &emac the device tree entry. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | | dts: arm64: rk3399: add max-frequency for sdhciKever Yang2017-01-11-0/+1
| | | | | | | | | | | | | | | | | | | | | Add 'max-frequency' for sdhci node for clock init. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* | | rockchip: dts: popmetal: add usb host power supply nodeKever Yang2017-01-11-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The popmetal board using a HOST_VBUS_DRV gpio signal to control the USB host port 5V power, add a fix regulator and pinctrl for it, and enable the USB host1 controller with the vbus-supply. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Added rockchip: tag: Signed-off-by: Simon Glass <sjg@chromium.org>
* | | ARM64: zynqmp: Fix i2c node's compatible stringMoritz Fischer2017-01-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core which fixes some silicon bugs that needed software workarounds in Version 1.0 that was used on Zynq systems. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | ARM64: zynqmp: Add idle state for ZynqMPStefan Krsmanovic2017-01-10-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the idle-states node to describe zynqmp idle states. Only cpu-sleep-0 idle state is added in this patch. References to the idle-states node are added in all CPU nodes. Time values: entry/exit latencies and min-residency, needs to be tuned. arm,psci-suspend-param is selected to comply with PSCIv1.0 and Extended StateID format. Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com> Acked-by: Will Wong <willw@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | ARM64: zynqmp: Fix usb nodes for dc1 and dc2Michal Simek2017-01-10-0/+8
| | | | | | | | | | | | | | | | | | | | | Fix DT binding for usb nodes. Setup correct aliases and enable dwc3 nodes. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | ARM64: zynqmp: Add missing earlycon for ep108Michal Simek2017-01-10-0/+1
| | | | | | | | | | | | | | | | | | | | | Just sync between version. Others zynqmp boards have this setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | ARM64: zynqmp: clk: Add the clock for watchdogShubhrajyoti Datta2017-01-10-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The watchdog clock node is missing. Add the same. This solves the below error. cdns-wdt fd4d0000.watchdog: input clock not found cdns-wdt: probe of fd4d0000.watchdog failed with error -2 Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source propertySudeep Holla2017-01-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | ARM: zynq: Remove spi-max-frequencyMichal Simek2017-01-10-2/+0
| |/ |/| | | | | | | | | | | spi-max-frequency for spi bus depends on devices which are connected to it. Remove this parameter from dtsi file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.1 at 2024-11-02 18:04:33 +0000