summaryrefslogtreecommitdiff
path: root/arch/arm/dts
Commit message (Collapse)AuthorAgeLines
* MLK-14497 mx6/mx7: DTS: Update dtsi file to add usb aliasYe Li2017-04-05-0/+7
| | | | | | | | After changed to USB DM driver, the framework uses the seq to find usb device when registering a gadget driver. We have to add usb0 alias in all i.MX6 and i.MX7 dtsi, otherwise the gadget driver register will fail. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14484-3 mx7ulp_arm2: Convert to use OF_CONTROLYe Li2017-04-05-1/+139
| | | | | | | | | | Add the 10x10 ARM2 and 14x14 ARM2 DTS files. Also convert the board codes to use OF_CONTROL and DM drivers. Since the DTS files only have UART and SD1 supported. So we only enable the DM for these two modules. QSPI and USB are still kept in non-DM fashion. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-9 mx7ulp_evk: Add eMMC reworked board supportYe Li2017-04-05-0/+18
| | | | | | | | | Add build configuration and DTS file to enable eMMC for eMMC reworked EVK board. Because the eMMC DTS file has QSPI node disabled, so we change to use non-DM QSPI driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-7 DTS: mx7ulp: Add PTA and PTB two GPIO banksYe Li2017-04-05-4/+22
| | | | | | | | | | | | | | | | PTA and PTB banks are at M4 domain, but some boards like ARM2 use them for controlling A7 domain modules. So we may need to support them in GPIO driver. In the imx_rgpio2p driver, the non-DM driver supports full 6 GPIO banks, with PTA from index 0. But the DM driver which uses DTB only have 4 GPIO banks, with PTC from index 0. This will cause problem when using GPIO. So this patch add PTA and PTB banks to DTB, and reorder the sequence for gpio with PTA from index 0. So the non-DM driver and DM driver are aligned. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-2 mx7ulp_evk: Add QSPI flash supportYe Li2017-04-05-1/+49
| | | | | | | | | Porting the QSPI flash board support from v2016.03, and convert to use DM QSPI driver. Since we need to support QSPI at default in u-boot, change the default DTS file to qspi enabled DTS. Signed-off-by: Ye Li <ye.li@nxp.com>
* imx: imx7ulp: add EVK board supportPeng Fan2017-04-05-0/+471
| | | | | | | | | | | | | | | | | | | | | | | | Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* arm: dts: add i.MX7ULP dtsi filePeng Fan2017-04-05-0/+1480
| | | | | | | | Add i.MX7ULP dtsi file. Add clock and pinfun header files. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* MLK-14419-3 imx: mx7d_arm2: add 19x19 LPDDR2/LPDDR3/DDR3 ARM2 supportPeng Fan2017-04-05-1/+1705
| | | | | | | | | Add 19x19 LPDDR2/LPDDR3/DDR3 ARM2 board supports. Enable the OF_CONTROL and convert them to use DM driver. Since the DTB lacks the support for some modules. We have to use QSPI and FEC with non-DM driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14419-2 imx: mx7d_arm2: add 12x12 ddr3 arm2 board supportPeng Fan2017-04-05-0/+559
| | | | | | | | Add 12x12 ddr3 arm2 board support and convert it to use OF_CONTROL and DM drivers. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14419-1 imx: mx7d_arm2: add 12x12 lpddr3 arm2 supportPeng Fan2017-04-05-1/+1132
| | | | | | | | Add mx7d 12x12 lpddr3 arm2 support, which has enabled the OF_CONTROL and DM drivers Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14418-9 imx: mx7dsabresd: add nand/qspi boot supportPeng Fan2017-04-05-4/+92
| | | | | | | | | | Add nand/qspi build configurations for their boot support. Also Add gpmi-nand and qspi specified DTS files for enable them. For QSPI, this patch changes it to use DM driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14418-8 imx: mx7dsabresd: add epdc supportPeng Fan2017-04-05-0/+64
| | | | | | | | Add epdc support from v2016.03. Add a epdc specified DTS file for using epdc Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14418-3 imx: mx7: Enable dtb support for mx7dsabresdPeng Fan2017-04-05-1/+3
| | | | | | Enable dtb support for mx7dsabresd board. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-14418-1 imx: mx7: introduce dts filesPeng Fan2017-04-05-54/+2825
| | | | | | | Introduce dts files for i.MX 7D SabreSD platform. From imx_4.1.y, based on "commit b423f954fb755" Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-14499 mx6qarm2: Convert to use OF_CONTROL and DM driverYe Li2017-04-05-0/+958
| | | | | | | | | Modify the mx6qarm2 configurations to enable OF_CONTROL and DM drivers: USB, Ethernet, UART and MMC. Add two DTS files for imx6q/dl arm2 board and imx6q pop arm2 board. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14391-2 mx6sxarm2: Add DTS files for ARM2 boardsYe Li2017-04-05-0/+4764
| | | | | | | Copy the DTS files from kernel for 14x14/17x17/19x19 ARM2 board for preparing enabling the OF_CONTROL. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14390-2 mx6sllarm2: Add DTS files for ARM2 boardYe Li2017-04-05-0/+862
| | | | | | | Copy the DTS files from kernel for LPDDR2/3 ARM2 board for preparing enabling the OF_CONTROL. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14380-2 mx6ullarm2: Add DTS files for ARM2 boardYe Li2017-04-05-0/+1159
| | | | | | | | | Copy the DTS files from kernel for DDR3 ARM2 board for preparing enabling the OF_CONTROL. Modify the QSPI n25q256a flash node's compatible to "spi-flash" for using DM SPI driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14382-2 mx6ularm2: Add DTS files for ARM2 boardsYe Li2017-04-05-1/+1606
| | | | | | | | | Copy the DTS files from kernel for DDR3 ARM2 board and LPDDR2 ARM2 board preparing for enabling OF_CONTROL. Modify the QSPI n25q256a flash node's compatible to "spi-flash" for using DM SPI driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-13 mx6ulevk: Add DTS filesYe Li2017-04-05-1055/+2938
| | | | | | | | | | Update i.MX6ul dtsi file and add mx6ul 14x14 and 9x9 evk DTS file to latest in kernel. To support DM QSPI driver, modify the DTS files with adding a spi0 alias for qspi node and changing the the n25q256a flash node's compatible to "spi-flash" Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-12 mx6sllevk: Update DTS filesYe Li2017-04-05-40/+51
| | | | | | Update i.MX6SLL dtsi file and mx6sll-evk DTS file to latest in kernel. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-10 mx6slevk: add DTS files and dt-binding header fileYe Li2017-04-05-0/+3037
| | | | | | | Update i.MX6SL dtsi file and dt-binding header files. Add the imx6sl-evk DTS file preparing for using DTB. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-8 mx6sxsabreauto: Update DTS file to latest in kernelYe Li2017-04-05-28/+793
| | | | | | | | Copy the imx6sx-sdb latest DTS file from imx_4.1.y kernel. To support DM QSPI driver, modify the n25q256a flash node's compatible to "spi-flash". Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-6 mx6sxsabresd: Update and add mx6sxsabresd DTS filesYe Li2017-04-05-109/+1593
| | | | | | | | | | | Update i.MX6SX dtsi file and relevant DTS header files. Add the imx6sx-sdb DTS files preparing for using DTB. To support DM QSPI driver 1. Modify the n25q256a flash node's compatible to "spi-flash". 2. Add spi0 and spi1 alias for qspi1 and qspi2. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-5 mx6qpsabreauto: Enable OF_CONTROL and DM driverYe Li2017-04-05-0/+184
| | | | | | | Update mx6qpsabreauto build configurations to use OF_CONTROL and DM driver. Also add the imx6qpsabreauto DTS file for using DTB. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-4 mx6dl/solosabreauto: Enable OF_CONTROL and DM driverYe Li2017-04-05-0/+121
| | | | | | | Update mx6dl/solosabreauto build configurations to use OF_CONTROL and DM driver. Also add the imx6dlsabreauto DTS file for using DTB. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-3 mx6qsabreauto: Enable OF_CONTROL and DM driverYe Li2017-04-05-0/+1284
| | | | | | | | | | | | | | Enable OF_CONTROL and DM driver on mx6qsabreauto. 1. Add the imx6qsabreauto relevant DTS file for using DTB. 2. Modify PMIC initialization codes to use DM PMIC driver. 3. Modify to use PCA953X DM driver 4. Remove NAND from default, since the default imx6q-sabreauto.dts disabled the nand. The pins are conflicted with UART3, while UART3 is enabled. 5. For NAND build configuration, remove the USB, since the imx6q-sabreauto-gpmi-weim.dts will have pin conflicts on steer logic. 6. GPIO requests added. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-2 mx6dlsabresd: Enable OF_CONTROL and DM driverYe Li2017-04-05-0/+153
| | | | | | | Enable OF_CONTROL and DM driver on mx6dlsabresd. And add the imx6dl sabresd DTS file for using DTB. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-1 mx6qpsabresd: Add DTS fileYe Li2017-04-05-0/+272
| | | | | | | Since we have enabled the i.MX6QP sabresd board with OF_CONTROL and DM driver. Add the imx6qp DTS file and imx6qp sabresd DTS file for build. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14375-3 mx6ullevk: Add 9x9 EVK board supportYe Li2017-04-05-0/+806
| | | | | | | | | | | | | | 1. Add build configs for i.MX6ULL 9X9 EVK. Enable DM I2C driver and DM PMIC driver for pfuze3000. Convert power init codes to use DM PMIC driver. 2. Add lpddr2 script IMX6ULL_9X9_LPDDR2_400MHz_16bit_V1.2.inc for the 9x9 board. Refer the commit 44a84b44a84cd1bdcc54d722987e5f109510891b 3. Add DTS file for 9x9 evk board. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14375-2 mx6ullevk: Add DTS and build configuration for various boot devicesYe Li2017-04-05-0/+70
| | | | | | | To support boot from QSPI/NAND/eMMC, add relevant DTS files and build configurations. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14375-1 mx6ullevk: Update board codes to align with v2016.03Ye Li2017-04-05-12/+231
| | | | | | | | | | | | | | | | | | Update mx6ull evk to add features from v2016.03. 1. Add support for NAND flash. 2. Add support for QSPI DM driver. 3. Add USB DM driver support. 4. Add two FEC support by using DM FEC driver 5. Update environments for various boot devices support: SD/NAND/eMMC/QSPI 6. Add MFGtool environments. 7. Add board codes for 9x9 EVK board For the DTS file, some changes are needed for using QSPI DM driver 1. Add spi0 alias for qspi node. Which is used for bus number 0. 2. Modify the n25q256a@0 compatible property to "spi-flash". 3. Modify spi4 (gpio_spi) node to spi5 Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14420-2 DTS: add DTS file for imx6q sabresd boardYe Li2017-03-14-0/+1123
| | | | | | Copy the dts and dtsi files from kernel to support imx6q sabresd board. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14420-1 DTS: Update imx6qdl relevant dts and clock definitionsYe Li2017-03-14-418/+451
| | | | | | Get the latest dtsi files and clock.h for imx6qdl from kernel Signed-off-by: Ye Li <ye.li@nxp.com>
* ARM: dts: uniphier: drop u-boot, dm-pre-reloc from system-bus pinctrl nodeMasahiro Yamada2017-02-23-8/+0
| | | | | | | | Since commit 26b09c022ab6 ("ARM: uniphier: move SBC and Support Card init code to U-Boot proper"), SPL does not need pin-mux settings for the System Bus. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2017-02-11-59/+59
|\
| * rockchip: rename miniarm to tinker boardEddie Cai2017-02-09-4/+4
| | | | | | | | | | | | | | | | Miniarm is the internal project code. Now it is officially named Tinker board. So rename it. Signed-off-by: Eddie Cai <eddie.cai@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * rockchip: dts: rk3288: correct sdram setting for miniarmJacob Chen2017-02-09-8/+8
| | | | | | | | | | | | | | | | | | | | | | miniarm board use lpddr3 Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Added 'rockchip:' prefix to subject: Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: I84c3679dab2dbd8d01c1ebfd22220946d07c03cd
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2017-02-09-2/+2
|\ \
| * | net: phy: dp83867: Add support for MAC impedance configurationMugunthan V N2017-02-07-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for programmable MAC impedance configuration and fix typo in DT impedance parameters names. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | arm: dts: trats: add the pmic node for using DMJaehoon Chung2017-02-09-8/+142
| |/ |/| | | | | | | | | | | | | To use driver-model adds the pmic node for max8997. This is used as kernel device-tree in Linux. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | ARM: dts: k2*: Rename the k2* files to keystone-k2* filesLokesh Vutla2017-02-08-20/+20
|/ | | | | | | | | | | | | | | | | | | | | | As reported in [1], rename the k2* dts files to keystone-* files this will force consistency throughout. Script for the same (and hand modified for Makefile and config files): for i in arch/arm/dts/k2* do b=`basename $i`; git mv $i arch/arm/dts/keystone-$b; sed -i -e "s/$b/keystone-$b/g" arch/arm/dts/*[si] done This is similar to linux kernel commit 5edafc29829bc ("ARM: dts: k2*: Rename the k2* files to keystone-k2* files") [1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-02-03-0/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/ls1046aqds_defconfig configs/ls1046aqds_nand_defconfig configs/ls1046aqds_qspi_defconfig configs/ls1046aqds_sdcard_ifc_defconfig configs/ls1046aqds_sdcard_qspi_defconfig configs/ls1046ardb_emmc_defconfig configs/ls1046ardb_qspi_defconfig configs/ls1046ardb_sdcard_defconfig
| * armv8: ls1046a: added usb nodes in dtsTang Yuantian2017-01-27-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | The LS1046A processor has three integrated USB 3.0 controllers (USB1, USB2, and USB3) that allow direct connection to the USB ports with appropriate protection circuitry and power supplies. USB1 and USB2 ports are powered by a NX5P2190UK device, which supplies 5v power at up to 1.2 A. The power enable and power-fault-detect pins are connected to the LS1046A processor via CPLD for individual port management. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-02-01-10/+3055
|\ \
| * | arm: dts: imx53-cx9020: fix packetloss on fec_mxcPatrick Bruenn2017-01-30-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pinmuxing for i.MX53 FEC ethernet copied from <kernel>/arch/arm/boot/dts/imx53-qsb-common.dtsi (at least until v4.9) was bad. It is different from the manual pinmuxing in <u-boot>/board/freescale/mx53loco/mx53loco.c which was used in cx9020 implementation previously before mainlining into u-boot. It seems the bug in imx53-qsb kernel device tree is hidden for so long, because it was never used, by the kernel driver. Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
| * | imx: dts: mx6sxsabreauto: enable i2c2/3Peng Fan2017-01-27-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | Enable i2c2/3, add pinctrl settings. Add max7310 for i2c3. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6sx: add dts for mx6sxsabreauto boardPeng Fan2017-01-27-0/+3003
| |/ | | | | | | | | | | | | | | Add dts for mx6sxsabreauto board. dts related files imported fro Linux (commit e5517c2a5a4). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | ARM: DTS: stm32: add stm32f746-disco device tree filesMichael Kurz2017-01-28-0/+202
| | | | | | | | | | | | | | | | | | | | | | This patch adds the DTS source files needed for stm32f746-disco board The files are based on the stm32f429/469 files from current linux kernel. Source for "arch/arm/dts/armv7-m.dtsi": Linux: "arch/arm/boot/dts/armv7-m.dtsi" Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
* | aspeed: Support for ast2500 Eval Boardmaxims@google.com2017-01-28-0/+25
| | | | | | | | | | ast2500 Eval Board device tree and board specific configuration. Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-09 19:10:04 +0000