summaryrefslogtreecommitdiff
path: root/arch/arm/dts
Commit message (Collapse)AuthorAgeLines
* sunxi: Add suport for A83T based Banana-pi M3 BoardVishnu Patekar2016-01-26-1/+66
| | | | | | | | | | | | Add dts and defconfig for Banana-pi M3 board. It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI, mic, AP6212 Wifi, etc on it. It is paired with AXP813 PMIC which is almost same as AXP818. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> [hdegoede@redhat.com: rename to Sinovoip_BPI_M3_defconfig/sun8i-a83t-sinovoip-bpi-m3.dts] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* rockchip: Add support for Raxda Rock 2Simon Glass2016-01-21-0/+1
| | | | | | | | | | | | This board includes an RK3288 SoC on a SOM. It can be mounted on a base-board which provides a wide range of peripherals. So far this is verified to boot to a prompt from a microSD card. The serial console works as well as HDMI. Thanks to Tom Cubie for sending me a board. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: rock2: dts: Make changes for U-BootSimon Glass2016-01-21-0/+21
| | | | | | Add the required pre-relocation tags and SDRAM init information for U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: rock2: Bring in device tree files from LinuxSimon Glass2016-01-21-0/+458
| | | | | | | Bring in the current device tree files for rock2 from linux/next commit 719d6c1. Hopefully this is the latest one. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: dts: Sync up SPDIF node with LinuxSimon Glass2016-01-21-0/+21
| | | | | | | This has been added and we have references to it in the rock2 board. Add this node. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Enable EDP and HDMI video outputSimon Glass2016-01-21-0/+6
| | | | | | | | | | | Enable these devices using the VOPL video output device. We explicitly disable VOPB in the device tree to avoid it taking over. Since this device has an LCD display this comes up by default. If the display fails for some reason then it will attempt to use HDMI. It is possible to force it to fail (and thus fall back to HDMI) by puting 'return -EPERM' at the top of rk_edp_probe(). For now there is no easy way to select between the two. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: spl: Support full-speed CPU in SPLSimon Glass2016-01-21-0/+2
| | | | | | | | Add a feature which speeds up the CPU to full speed in SPL to minimise boot time. This is only supported for certain boards (at present only jerry). Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Fix the SDRAM timingSimon Glass2016-01-21-1/+1
| | | | | | | There is a minor error in the SDRAM timing. It does not seem to affect anything so far. Fix it just in case. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Enable the Chrome OS ECSimon Glass2016-01-21-0/+4
| | | | | | Turn on the EC and enable the keyboard. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Disable pmic-int-1 setup to avoid a hangSimon Glass2016-01-21-1/+4
| | | | | | | This hangs when activated (by probing the PMIC). Disable it for now until we understand the root cause. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Use pwrseq for MMC start-up on jerrySimon Glass2016-01-21-4/+11
| | | | | | | This is defined in the device tree in Linux. Copy over the settings so that this can be used instead of hard-coding the reset line. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: ls1021atwr: Enable driver model lpuart serial driverBin Meng2016-01-20-1/+17
| | | | | | | | | | | Convert ls1021atwr_nor_lpuart to driver model support. As a start, enable lpuart serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alison Wang <alison.wang@nxp.com> Tested-by: Alison Wang <alison.wang@nxp.com> Acked-by: Simon Glass <sjg@chromium.org>
* arm: ls1021atwr: Split off board device treeBin Meng2016-01-20-3/+18
| | | | | | | Move /chosen node out of the board device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* arm: ls1021atwr: Convert to driver model and enable serial supportBin Meng2016-01-20-4/+4
| | | | | | | | Convert ls1021atwr_nor to driver model support. As a start, enable ns16550 serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* arm: dts: dra7-evm: add tick-timer to chosen nodeMugunthan V N2016-01-20-0/+1
| | | | | | | Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: dts: dra72-evm: add tick-timer to chosen nodeMugunthan V N2016-01-20-0/+1
| | | | | | | Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: dts: am335x-evm: add tick-timer to chosen nodeMugunthan V N2016-01-20-0/+1
| | | | | | | Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: dts: am335x-boneblack: add tick-timer to chosen nodeMugunthan V N2016-01-20-0/+1
| | | | | | | Specify which timer to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: dts: am437x-gp-evm: add tick-timer to chosen nodeMugunthan V N2016-01-20-0/+1
| | | | | | | Specify which timer to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: dts: am437x-sk-evm: add tick-timer to chosen nodeMugunthan V N2016-01-20-0/+1
| | | | | | | Specify which timer to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* armv8: cavium: Add ThunderX 88xx board definitionSergey Temerkhanov2016-01-19-2/+2
| | | | | | | | | This commit adds basic Cavium ThunderX 88xx board definitions and support. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> [trini: Drop CONFIG_SYS_GENERIC_BOARD define] Signed-off-by: Tom Rini <trini@konsulko.com>
* armv8: cavium: Add the device tree for ThunderXSergey Temerkhanov2016-01-19-0/+395
| | | | | | | | | This commit adds the FDT for the ThunderX family of SoCs Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* mvebu: Support Synology DS414Phil Sutter2016-01-14-1/+339
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: mvebu: Add SolidRun ClearFog Armada 38x initial supportStefan Roese2016-01-14-0/+510
| | | | | | | | | | | | | | | | | | | | This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: armada-388-gp.dts: Add ethernet aliasesStefan Roese2016-01-14-0/+2
| | | | | | | | Adding these aliases enables the update of the MAC addresses from within U-Boot. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Add armada-xp-maxbcm.dts for maxbcm boardStefan Roese2016-01-14-1/+251
| | | | | | | | | This is needed for the upcoming ethernet DM conversion of the maxbcm board. The configuration of the PHY is then extracted from the DT instead of using the defines from the config header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Add SPI driver model supportStefan Roese2016-01-14-0/+15
| | | | | | | | | | | | This patch enables the DM support for the SPI driver and the SPI NOR flash chips. Some MVEBU boards boot from SPI NOR, so adding the aliases and enabling CONFIG_DM_SEQ_ALIAS is needed here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Simon Glass <sjg@chromium.org>
* arm: mvebu: Add DM and OF_CONTROL support to SPLStefan Roese2016-01-14-0/+3
| | | | | | | | | | | | | | | | | | | | | | This patch adds full DM support to the SPL on MVEBU. Currently only serial is supported. Other drivers will follow. This patch also adds the necessary config values for the DEBUG UART to the MVEBU defconfig files. This came in handy while implementing this DM support. Additionally, the mvebu specific SPL linker script is removed and this common one is used instead: arch/arm/cpu/u-boot-spl.lds This common linker script already handles all special cases. No need to reinvent the wheel for MVEBU here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Simon Glass <sjg@chromium.org>
* arm: dts: am4372: add qspi register maps for memory mapMugunthan V N2016-01-13-1/+4
| | | | | | | | Add qspi memory map address to device tree. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* arm: dts: dra72-evm: add spi-flash comaptible for flashMugunthan V N2016-01-13-1/+1
| | | | | | | | | In U-Boot most flashes uses "spi-flash" as compatible to bind the device to flash driver, so adding "spi-flash" compatible to m25p80 node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* arm: dts: dra7-evm: add spi-flash comaptible for flashMugunthan V N2016-01-13-1/+1
| | | | | | | | | In U-Boot most flashes uses "spi-flash" as compatible to bind the device to flash driver, so adding "spi-flash" compatible to m25p80 node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* arm: dts: am437x-gp-evm: add spi-flash comaptible for flashMugunthan V N2016-01-13-1/+1
| | | | | | | | | In U-Boot most flashes uses "spi-flash" as compatible to bind the device to flash driver, so adding "spi-flash" compatible to m25p80 node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* arm: dts: dra7: add qspi register maps for memory map and control moduleMugunthan V N2016-01-13-2/+5
| | | | | | | | Add qspi memory map and control module register maps to device tree. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* dts: dra7: add spi alias for qspiMugunthan V N2016-01-13-0/+1
| | | | | | | | | add spi alias for qspi so that spi probes the device and driver successfully. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-12-24-0/+4
|\ | | | | | | | | | | | | Conflicts: include/configs/axs101.h Signed-off-by: Tom Rini <trini@konsulko.com>
| * arm: socfpga: Make /soc available in pre-relocMarek Vasut2015-12-22-0/+4
| | | | | | | | | | | | | | | | This node must be available before relocation, otherwise the board will not find mmc and will thus not boot. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* | ARM: dts: uniphier: add SD/MMC pinmux nodesMasahiro Yamada2015-12-23-0/+15
| | | | | | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: dts: uniphier: use stdout-path instead of consoleMasahiro Yamada2015-12-23-16/+8
| | | | | | | | | | | | | | | | Sync device trees with Linux. Linux commit: 06ff6b2d63210922a1b1d0f4997e29ce75b5e0c0 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: dts: uniphier: add outer cache nodesMasahiro Yamada2015-12-23-7/+84
| | | | | | | | | | | | | | These nodes are not parsed by U-Boot for now, but syncing device trees with Linux is helpful for easier diffing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: dts: uniphier: factor out common nodes to uniphier-common32.dtsiMasahiro Yamada2015-12-23-881/+616
| | | | | | | | | | | | | | | | | | | | | | UniPhier SoCs (except PH1-sLD3) have several nodes in common. Factor out them into uniphier-common32.dtsi. This improves the code maintainability. PH1-sLD3 is so old that it has more or less different register maps than the others. So, it cannot be included in this refactoring. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | sun5i: Add defconfig and dts file for the Empire Electronix D709 tabletHans de Goede2015-12-21-0/+242
|/ | | | | | | | | | | | | | | The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet, featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack. Empire Electronix is written on the back of the tablet, the D709 model info can be found in the about tablet menu in android. The PCB has no markings to speak of. This dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* arm: socfpga: socrates: Probe DWC2 UDC from OF instead of hard-coded dataMarek Vasut2015-12-20-0/+8
| | | | | | | | | | | | | | This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Lukasz Majewski <l.majewski@majess.pl> Cc: Lukasz Majewski <l.majewski@samsung.com>
* arm: socfpga: sockit: Probe DWC2 UDC from OF instead of hard-coded dataMarek Vasut2015-12-20-2/+7
| | | | | | | | | | | | | | This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Lukasz Majewski <l.majewski@majess.pl> Cc: Lukasz Majewski <l.majewski@samsung.com>
* arm: socfpga: mcvevk: Probe DWC2 UDC from OF instead of hard-coded dataMarek Vasut2015-12-20-0/+5
| | | | | | | | | | | | | | This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Lukasz Majewski <l.majewski@majess.pl> Cc: Lukasz Majewski <l.majewski@samsung.com>
* arm: socfpga: de0_nano: Probe DWC2 UDC from OF instead of hard-coded dataMarek Vasut2015-12-20-0/+5
| | | | | | | | | | | | | | This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Lukasz Majewski <l.majewski@majess.pl> Cc: Lukasz Majewski <l.majewski@samsung.com>
* arm: socfpga: cyclone5-socdk: Probe DWC2 UDC from OF instead of hard-coded dataMarek Vasut2015-12-20-4/+5
| | | | | | | | | | | | | | This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Lukasz Majewski <l.majewski@majess.pl> Cc: Lukasz Majewski <l.majewski@samsung.com>
* arm: socfpga: arria5-socdk: Probe DWC2 UDC from OF instead of hard-coded dataMarek Vasut2015-12-20-0/+1
| | | | | | | | | | | | | | This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Lukasz Majewski <l.majewski@majess.pl> Cc: Lukasz Majewski <l.majewski@samsung.com>
* arm: socfpga: socrates: Add missing PHY skew configMarek Vasut2015-12-20-0/+9
| | | | | | | | | Add missing KSZ9021 PHY skew configuration for the EBV socrates board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: zynq: Update ZYBO config optionsNathan Rossi2015-12-18-0/+16
| | | | | | | | | | | Update the ZYBO device tree and enable config options that relate to the added devices in the device tree. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM: zynq: Enable u-boot,dm-pre-reloc for sdhciMichal Simek2015-12-18-0/+6
| | | | | | | | Enable u-boot,dm-pre-reloc for sdhci for zc706, zed and zybo. And create aliases for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-07-07 20:16:49 +0000