summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
* build: imx: Fix 'u-boot.imx' build without full OBJTREE referenceOtavio Salvador2013-02-12-2/+2
| | | | | | | | | | | | | | | | | | | When calling 'make u-boot.imx' the build were failing as it were expecting the full path for the file; this regression has been included by commit 71a988a (imximage.cfg: run files through C preprocessor). The direct references for u-boot.imx were replaced by $(obj) as config.mk handles the proper setting of it making it set to $(OBJTREE) when required. The build has been test using: - ./MAKEALL -s mx5 -s mx6 - make u-boot.imx - make O=/tmp/build Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mx6: Disable Power Down Bit of watchdogFabio Estevam2013-02-12-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a mx6qsabresd revision C board with rev1.2 mx6q, the system gets resetted and it is not able to reach the Linux prompt. Comparing the watchdog behaviour on a revB versus revC board: - On a mx6qsabresd revB: U-Boot > reset resetting ... U-Boot 2013.01-10524-g432a3aa-dirty (Feb 07 2013 - 13:34:46) CPU: Freescale i.MX6Q rev1.1 at 792 MHz Reset cause: WDOG ... - On a mx6qsabresd revC: U-Boot > reset resetting ... U-Boot 2013.01-10524-g432a3aa-dirty (Feb 07 2013 - 13:34:46) CPU: Freescale i.MX6Q rev1.1 at 792 MHz Reset cause: POR So due to revC POR/watchdog circuitry whenever a watchdog occurs, it causes a POR. Clearing the PDE - Power Down Enable bit of WMCR registers fixes the problem and is also safe for all mx6 boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* mxs: Use __weak annotation to simplify codeFabio Estevam2013-01-28-7/+4
| | | | | | | Using the __weak annotation can make the code cleaner. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* mxs: Boost the memory power supplyMarek Vasut2013-01-28-2/+2
| | | | | | | | | | | The memory power supply on MX23 didn't pump out enough juice into the DRAM chip, thus caused occasional memory corruption. Fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* imximage.cfg: run files through C preprocessorTroy Kisky2013-01-22-2/+2
| | | | | | | | | | | | The '#' used as comments in the files cause the preprocessor trouble, so change to /* */. The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile .gitignore was updated to ignore .cfgtmp files. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* mxs: Add MX23 quirks into the clock codeOtavio Salvador2013-01-21-9/+26
| | | | | | | | | | The MX23 has different handling of the SSP clock and GPMI NAND clock sources, add necessary quirks into the clock code to properly handle these. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mxs: Fix the memory init for MX23Otavio Salvador2013-01-21-15/+78
| | | | | | | | | | The memory init is slightly different on MX23, thus split the memory init for mx23 and mx28 into different functions. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mxs: Add function to ungate the power block on MX23Marek Vasut2013-01-21-0/+12
| | | | | | | | | | The power block on MX23 must first be ungated before it can be operated. Add function to MXS power init that ungates it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* mx23: config: Enable building of u-boot.sb binaryOtavio Salvador2013-01-21-0/+18
| | | | | | | | | For i.MX23 we need to pass imx23 as elftosb param. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: SPL: Initialize DDR at 133MHzOtavio Salvador2013-01-21-0/+20
| | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: SPL: Add boot mode supportOtavio Salvador2013-01-21-0/+25
| | | | | | | | | This adds the boot mode support for i.MX23 processors. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: Add support on print_cpuinfo()Otavio Salvador2013-01-21-1/+18
| | | | | | | | | Add information to identify i.MX23 chips and its known revisions. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mxs: clock: Use 'mxs' prefix for methodsOtavio Salvador2013-01-21-23/+23
| | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mxs: ssp: Pull out the SSP bus to regs conversionMarek Vasut2013-01-21-1/+1
| | | | | | | | | | | | | Create function which converts SSP bus number to SSP register pointer. This functionality is reimplemented multiple times in the code, thus make one common implementation. Moreover, make it a switch(), since the SSP ports are not mapped in such nice linear fashion on MX23, therefore having it a switch will simplify things there. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* pxa: Save lr register in relocate_code functionŁukasz Dałek2013-01-14-0/+2
| | | | | | | | | | | When u-boot is compiled for PXA25x processor, pxa/start.S is calling cpu_init_crit by BL instruction. BL is overwriting lr register so relocate_code is going into infinite loop. This patch preservs lr register in r12 before calling cpu_init_crit and after function returns restores it. Signed-off-by: Lukasz Dalek <luk0104@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-01-14-45/+10
|\
| * mx31/mx35/mx51/mx53/mx6: add watchdogTroy Kisky2013-01-13-45/+0
| | | | | | | | | | | | | | Use a common watchdog driver for all these cpus. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * mx6: Add workaround for ARM errataFabio Estevam2013-01-09-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add workaround for the following ARM errata: 743622 and 751472. The motivation for this change is the following kernel commit 62e4d357a (ARM: 7609/1: disable errata work-arounds which access secure registers), which removes the errata from multiplatform kernel. Since imx has been converted to multiplatform in the kernel, we need to apply such workarounds into the bootloader. Workaround code has been taken from arch/arm/mm/proc-v7.S from 3.7.1 kernel. Explanation of each erratum is provided at "Chip Errata for the i.MX 6Dual/6Quad" document available at: cache.freescale.com/files/32bit/doc/errata/IMX6DQCE.pdf Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-01-14-6/+340
|\ \
| * | Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clkJaehoon Chung2013-01-11-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Mobile storage is used the CLK_DIV_FSYS3 value. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Exynos: clock: support get_mmc_clk for exynosJaehoon Chung2013-01-11-0/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | To get exactly clock value for mmc, support the get_mmc_clk() like set_mmc_clk(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: Change parent clock of FIMD to MPLLAjay Kumar2013-01-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With VPLL as source clock to FIMD, Exynos DP Initializaton was failing sometimes with unstable clock. Changing FIMD source to MPLL resolves this issue. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: FDT : Decode peripheral idRajeshwari Shinde2013-01-08-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Api is added to decode peripheral id based on the interrupt number of the peripheral. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | arm:exynos4:pinmux: Modify the gpio function for mmcPiotr Wilczek2013-01-08-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add pinmux settings for Exynos4 for mmc0 and mmc2 Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequencyChander Kashyap2012-12-26-5/+158
| | | | | | | | | | | | | | | | | | | | | Adds functions to extract clock frequency of Exynos4x12 IPs. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | Merge 'u-boot-atmel/master' into 'u-boot-arm/master'Albert ARIBAUD2013-01-09-0/+13
|\ \ \
| * | | at91sam9x5: enable USB support for 9x5ek board.Richard Genoud2012-12-09-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | | | Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master'Albert ARIBAUD2013-01-09-1/+1
|\ \ \ \
| * | | | kirkwood: make MPP arrays static constAlbert ARIBAUD2013-01-09-1/+1
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This saves stack and code memory for local copy, and consumes initialized data memory. For 22 of the 29 kirkwood-based boards, this results in a global saving of about 30 bytes. For 7 of them, it results in an increase of 6 to 14 bytes. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | | | arm: remove useless code in start.S filesAlbert ARIBAUD2013-01-08-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove code such as unneeded includes or labels. These removals have no functional effect. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | | | arm: move C runtime setup code in crt0.SAlbert ARIBAUD2013-01-08-663/+125
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move all the C runtime setup code from every start.S in arch/arm into arch/arm/lib/crt0.S. This covers the code sequence from setting up the initial stack to calling into board_init_r(). Also, rewrite the C runtime setup and make functions board_init_*() and relocate_code() behave according to normal C semantics (no jumping across the C stack any more, etc). Some SPL targets had to be touched because they use start.S explicitly or for some reason; the relevant maintainers and custodians are cc:ed. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-01-08-50/+389
|\ \ \ | |_|/ |/| | | | | | | | This required manual merging drivers/mtd/nand/Makefile and adding am335x_evm support for CONFIG_SPL_NAND_DRIVERS
| * | davinci: fixed cpu resetDavide Bonfanti2012-12-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The reset procedure works on watchdog timer while before it was modifying TIMER_1 registers. Tested on DM365. Signed-off-by: Davide Bonfanti <davide.bonfanti@bticino.it>
| * | omap: emif: configure emif only when requiredLokesh Vutla2012-12-10-5/+36
| | | | | | | | | | | | | | | | | | | | | | | | DMM_LISA_MAP registers program whether memory is mapped on particular EMIF or not. Irrespective of these registers EMIF is getting configured. Correcting the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | OMAP: Tweak omap-common/Makefile since reset.S -> reset.cRobert P. J. Day2012-12-10-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | Git commit d417d1db5f9092d125ddea882ced77eaa5f3d236 replaced the omap-common file reset.S with reset.c, but the Makefile was not adjusted for that. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
| * | omap4: Add comments on some "#endif"s for readability.Robert P. J. Day2012-12-10-3/+3
| | | | | | | | | | | | | | | | | | No functional changes, simply for readability. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
| * | omap3: Add a few comments to "#endif"s for readability.Robert P. J. Day2012-12-10-4/+4
| | | | | | | | | | | | | | | | | | | | | No functional changes, just more comments for readability when a preprocessor check spans more than a few lines, and for consistency. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
| * | Pass sdrc timing values through board_sdrc_timings structurePeter Barada2012-12-10-20/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of passing individual registers by value to board_get_mem_timings, pass a board_mem_timings structure pointer for the board files to fill in. Pass same structure pointer to write_sdrc_timings. This saves about 90 bytes of space in SPL. Signed-off-by: Peter Barada <peter.barada@logicpd.com>
| * | am33xx: add ELM supportMansoor Ahamed2012-12-10-0/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | AM33XX has Error Location Module (ELM) that can be used in conjuction with GPMC controller to implement BCH codes fully in hardware. This code is mostly taken from arago tree. Signed-off-by: Mansoor Ahamed <mansoor.ahamed@ti.com> Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
| * | am33xx: NAND supportIlya Yanok2012-12-10-0/+108
| | | | | | | | | | | | | | | | | | | | | | | | TI AM33XX has the same GPMC controller as OMAP3 so we could just use the existing omap_gpmc driver. This patch adds adds required definitions/intialization. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
| * | OMAP: include sys_proto.h from boot-commonIlya Yanok2012-12-10-0/+1
| | | | | | | | | | | | | | | | | | | | | Include asm/arch/sys_proto.h for gpmc_init prototype. Without this we get a warning while building for AM335x. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
| * | omap3/mem.c: remove unused definesAndreas Bießmann2012-12-10-14/+0
| |/ | | | | | | | | | | | | | | These GPMC_CS defines are a leftover from prior gpmc_init(). Commit 187af954 removed the need for these definitions but missed to remove them. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Tom Rini <trini@ti.com>
| |
| \
| \
| \
*---. \ Merge samsung, imx, tegra into u-boot-arm/masterAlbert ARIBAUD2012-12-22-257/+358
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | This commit merges branches from samsung, imx and tegra meant to fix merge issues between u-boot/master and u-boot-arm/master, as well as a few manual merge fixes.
| | | * Merge remote-tracking branch 'u-boot/master' into u-boot-arm-mergedAllen Martin2012-12-19-0/+249
| | | |\ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: README arch/arm/cpu/armv7/exynos/clock.c board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h
| | | * exynos:pinmux: Add pinmux support for i2cPiotr Wilczek2012-12-11-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add pinmux for I2C for Exynos4 Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com>
| | | * exynos:clock: Add i2c clockPiotr Wilczek2012-12-11-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds i2c clock for Exynos4 Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com>
| | | * mxs: i2c: Implement algorithm to set up arbitrary i2c speedMarek Vasut2012-12-11-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This algorithm computes the values of TIMING{0,1,2} registers for the MX28 I2C block. This algorithm was derived by using a scope, but the result seems correct. The resulting values programmed into the registers do not correlate with the contents in datasheet. When using the values from the datasheet, the I2C clock were completely wrong. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Wolfgang Denk <wd@denx.de>
| | * | Merge branch 'master' of git://git.denx.de/u-boot into masterStefano Babic2012-12-08-0/+169
| | |\ \ | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/woodburn_common.h board/woodburn/woodburn.c These boards still use the old old PMIC framework, so they do not merge properly after the power framework was merged into mainline. Fix all conflicts and update woodburn to use Power Framework. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | mxs: SPL: Generalize memory initializationOtavio Salvador2012-12-07-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a generic 'dram_vals[]' array that has the full initialization sequence and rename the initialization method so it doesn't has a frequency on its name. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| | * | mxs: Staticize SPL functionsMarek Vasut2012-12-04-34/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MXS SPL didn't mark local functions "static". Fix it. This also makes the SPL smaller by roughly 300 bytes. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
generated by cgit v1.1 at 2024-10-04 03:22:14 +0000