summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Expand)AuthorAgeLines
* imx: imx7d: fix ahb clock mux 1Stefan Agner2016-05-07-1/+1
* MLK-12658 imx: adjust POR_B setting on i.MX6ULLAnson Huang2016-04-15-0/+13
* MLK-12616-11 imx: mx6ull: add mx6ull arm2 board supportPeng Fan2016-04-12-0/+6
* MLK-12616-10 mx6ull: Add AIPS3 initializationYe Li2016-04-12-3/+3
* MLK-12616-8 mx6ull: update CCM registers and clock settingsYe Li2016-04-12-2/+18
* MLK-12616-7 mx6ull: Not apply the PMIC_STBY_REQ_PAD work around for mx6ullPeng Fan2016-04-12-1/+1
* MLK-12616-6 mx6ull: Update s_init to skip pfd resetYe Li2016-04-12-2/+3
* MLK-12616-3 mx6ull: Enable CONFIG_MX6UL definition for MX6ULLYe Li2016-04-12-0/+4
* MLK-12576 imx: imx6ul: disable POR_B internal pull upAnson Huang2016-03-24-0/+9
* MLK-12492-1 mx6: fix type style problems introduced by patch MLK-12483Ye Li2016-03-04-71/+69
* MLK-12488 mx6sl/ul/sx: Fix incorrect clear mmdc_ch0 handshake maskYe Li2016-03-04-1/+4
* MLK-12483-4 mx6: Modify drivers to disable fused modulesYe Li2016-03-04-8/+7
* MLK-12483-3 mx6: Add a module fuse checkingYe Li2016-03-04-0/+272
* MLK-12375 imx: mx6ul: fix PMIC_STBY_REQ settinng for TO1.1Peng Fan2016-03-04-6/+8
* MLK-12068 imx: mx6ul/sx: fix mmdc_ch0 clk calculationPeng Fan2016-03-04-3/+57
* MLK-12066 imx: mx7: default enable MDIO open drainPeng Fan2016-03-04-0/+20
* MLK-11553 imx: mx7 fix typo for showclocksPeng Fan2015-09-15-2/+2
* MLK-11528 imx: mx6ul check fuse before init beePeng Fan2015-09-10-1/+11
* MLK-11505 imx: mx6ul: Disable the LCDIF before system resetYe.Li2015-09-08-0/+9
* MLK-11408-2 imx: mx7d: Isolate 26 IP resources to domain 0 for A coreYe.Li2015-08-25-0/+51
* MLK-11408-1 imx: mx7d: Add mx7d RDC driver supportYe.Li2015-08-25-0/+6
* MLK-10957: ARM: mx6qp: do not turn off PURobin Gong2015-07-31-1/+2
* MLK-11228-2 android: Add fastboot command "reboot-bootloader" supportYe.Li2015-07-13-0/+12
* MLK-11228-1 android: Integrate community fastboot with FSL i.MX fastbootYe.Li2015-07-13-75/+6
* MLK-11201 mx7: clock: Fix PLL divider for the 100MHz caseFabio Estevam2015-06-29-1/+1
* MLK-11159-2 Revert "MLK-11028 imx: mx6qp change L2 prefetch offset to 0"Robby Cai2015-06-24-1/+1
* MLK-11101 imx: mx6: Move the set_wdog_reset out of CONFIG_LDO_BYPASS_CHECKYe.Li2015-06-12-22/+22
* MLK-11028 imx: mx6qp change L2 prefetch offset to 0Peng Fan2015-06-12-1/+1
* MLK-11064 imx: mx6qp: Adjust AQos settings for peripheralsYe.Li2015-06-08-0/+3
* MLK-11050 ARM: imx6: configure the PMIC_STBY_REQ pin as open drainBai Ping2015-06-05-0/+9
* MLK-10958 imx: mx6ul support Bus Encryption EnginePeng Fan2015-05-25-1/+457
* MLK-10546-2 imx: mx7 implement reset_miscPeng Fan2015-05-22-0/+8
* MLK-10936 imx: mx7d: Change to use bootrom_sw_info for getting boot deviceimx_3.14.38_6ul_engrYe.Li2015-05-20-19/+17
* MLK-10884 imx: MX6SX: Fix IOMUXC GPR registers access issueYe.Li2015-05-13-2/+2
* MLK-10870 imx: mx7d: Implement to get board serial numberYe.Li2015-05-11-1/+7
* MLK-10829-1 imx:mx6sx correct i2c and video clock settingsPeng Fan2015-05-06-11/+1
* MLK-10812-2 imx:mx6ul add clock supportPeng Fan2015-05-05-18/+152
* MLK-10812-1 imx:mx6 add i2c4 supportPeng Fan2015-05-05-6/+23
* MLK-10808-5 imx: mx6ul: Update soc relevant settingsYe.Li2015-05-05-8/+22
* MLK-10808-4 imx: Move system counter driver to imx-commonYe.Li2015-05-04-127/+1
* MLK-10708 imx:mx6qp Update Saturation THR for PRExPeng Fan2015-04-29-4/+4
* MLK-10702 imx: mx7d: clock: correct fec MDC root clockFugang Duan2015-04-29-1/+1
* MLK-10774-48 imx: mx7 update hab_caam_clock_enablePeng Fan2015-04-29-9/+7
* ENGR00329484-2 ARM:MX6: Clear Align bit in SCTLRPeng Fan2015-04-29-0/+3
* MLK-10674-2 imx: mx6qp settings for PREPeng Fan2015-04-29-0/+38
* MLK-10774-46 imx:mx6sx use correct GPR addressPeng Fan2015-04-29-1/+1
* MLK-10569 imx7d: call set_epdc_qos unconditionallyRobby Cai2015-04-29-4/+1
* MLK-10524: iMX6x: Implement workaround for Cortex-A9 errata 845369Nitin Garg2015-04-29-0/+5
* MLK-10513 mx7: HAB: Fix HAB RVT addresses to unified sectionYe.Li2015-04-29-5/+5
* MLK-10496: Check the PL310 version for applying errataNitin Garg2015-04-29-11/+10