summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
* Add mxc_ocotp driverBenoît Thébaudeau2013-04-28-0/+14
| | | | | | Add an mxc_ocotp driver for i.MX6. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: Homogenize and fix fuse register definitionsBenoît Thébaudeau2013-04-28-2/+2
| | | | | | | | | | | | | | | | | | IIM: - Homogenize prg_p naming (the reference manuals are not always self-consistent for that). - Add missing SCSx and bank registers. - Fix the number of banks on i.MX53. OCOTP: - Rename iim to ocotp in order to avoid confusion. - Rename fuse_data to read_fuse_data, and sticky to sw_sticky, according to the reference manual. - Merge the existing spinoff gp1 fuse definition on i.MX6. - Fix the number of banks on i.MX6. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx23: Put back RAM voltage level to its original valueFabio Estevam2013-04-28-2/+2
| | | | | | | | | | commit 5c2f444c9 (mxs: Reset the EMI block on mx23) changed the DDR voltage level, which causes mx23evk to fail to load a kernel. Put back the original values, so that mx23evk can boot a kernel again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Robert Nelson <robertcnelson@gmail.com>
* mx5: Define a common get_board_rev()Fabio Estevam2013-04-25-0/+7
| | | | | | | | | | When booting a FSL kernel based on 2.6.35 it is necessary to pass the revision tag to the kernel. Place a common weak function into soc.c for such purpose. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* mtd: mxs_nand: Add support for i.MX6Stefan Roese2013-04-22-0/+7
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* imx: Move some i.MX common functions into the imx-common directoryStefan Roese2013-04-22-63/+0
| | | | | | | | | | | | | | | | | | This patch moves the following functions into the imx-common directory: - mxs_wait_mask_set() - mxs_wait_mask_clr() - mxs_reset_block() These are currently used by i.MX28. But the upcoming GPMI NAND port for i.MX6 will also use these functions. So lets move them to a common location to re-use them. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* imx: Move some header files from arch-mxs to imx-commonStefan Roese2013-04-22-1/+1
| | | | | | | | | | | | | | | | | | | The following headers are moved to a i.MX common location: - regs-common.h - regs-apbh.h - regs-bch.h - regs-gpmi.h - dma.h This way this header can be re-used also by other i.MX platforms. For example the i.MX6 which will need it for the upcoming NAND support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: Add solo-lite variant supportFabio Estevam2013-04-22-2/+36
| | | | | | | | | mx6 solo-lite is another member of the mx6 series. For more information about mx6 solo-lite, please visit: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6SL&nodeId=018rH3ZrDRB24A Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* Merge branch 'next'Stefano Babic2013-04-21-2/+2
|\
| * mx35 iomux: correct offsets of IOMUX registersPhilip Paeps2013-04-16-2/+2
| | | | | | | | | | | | | | | | | | | | This makes mxc_iomux_set_input() work correctly. Previously, the incorrect offset of IOMUXSW_INPUT_CTL caused mxc_iomux_set_input() to write to the wrong register, possibly resulting in unexpected behaviour. Signed-off-by: Philip Paeps <philip@paeps.cx> Acked-by: Stefano Babic <sbabic@denx.de>
* | exynos: Correct use of 64-bit divisionSimon Glass2013-04-17-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | The current code is causing errors like this on my toolchains: /usr/x86_64-pc-linux-gnu/armv7a-cros-linux-gnueabi/binutils-bin/2.22/ ld.bfd.real: failed to merge target specific data of file /usr/lib/gcc/ armv7a-cros-linux-gnueabi/4.7.x-google/libgcc.a(_divdi3.o) Use do_div() to avoid this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Tegra: Split tegra_get_chip_type() into soc & sku funcsTom Warren2013-04-15-34/+65
| | | | | | | | | | | | | | | | | | | | | | As suggested by Stephen Warren, use tegra_get_chip() to return the pure CHIPID for a Tegra SoC (i.e. 0x20 for Tegra20, 0x30 for Tegra30, etc.) and rename tegra_get_chip_type() to reflect its true function, i.e. tegra_get_chip_sku(), which returns an ID like TEGRA_SOC_T25, TEGRA_SOC_T33, etc. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | Tegra: Fix MSELECT clock divisors for T30/T114.Tom Warren2013-04-15-8/+6
| | | | | | | | | | | | | | | | | | A comparison of registers between our internal NV U-Boot and u-boot-tegra/next showed some discrepancies in the MSELECT clock divisor programming. T20 doesn't have a MSELECT clk src reg. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | Tegra114: Initialize System Counter (TSC) with osc frequencyTom Warren2013-04-15-0/+33
| | | | | | | | | | | | | | | | | | T114 needs the SYSCTR0 counter initialized so the TSC can be read by the kernel. Do it in the bootloader since it's a write-once deal (secure/non-secure mode dependent). Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | Tegra: Configure L2 cache control reg properly.Tom Warren2013-04-15-8/+51
| | | | | | | | | | | | | | | | | | | | Without this change, kernel fails at calling function cache_clean_flush during kernel early boot. Aprocryphally, intended for T114 only, so I check for a T114 SoC. Works (i.e. dalmore 3.8 kernel now starts printing to console). Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Tegra: Restore cp15 VBAR _start vector write for ARMv7Tom Warren2013-04-15-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | A start vector fix was added by AneeshV for OMAP4 (commit 0d479b53), and caused the old monilithic Tegra builds to hang due to an undefined instruction trap. Previously, the code needed to run on both the AVP (ARM7TDI) and A9, and the AVP doesn't have a CP15 register. I corrected this in commit 6d6c0bae w/#ifndef CONFIG_TEGRA, but now that we use SPL, and boot the AVP w/o any ARMv7 code, I can revert my change, and make Aneesh's change apply to Tegra. Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: support T33 SKU of Tegra30Stephen Warren2013-04-15-0/+1
|/ | | | | | | | | | | | | | | | | | | Make U-Boot aware of the T33 SKU of Tegra30, and treat it identically to any other Tegra30. An alternative would be to simply remove the SKU checking from tegra_get_chip_type(); most use of the value most likely simply wants to know the current chip, not the specific SKU. Or, the function could be split into separate tegra_get_chip() and tegra_get_sku() for the cases where differentiation really is required. I wonder whether tegra_get_chip_type() should printf() whenever any unkown chip/SKU is found, although perhaps the function is called so early that the printf() wouldn't actually make it to the UART anyway. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* ARMv7: start.S: stay in HYP mode if u-boot is entered in itAndre Przywara2013-04-15-3/+7
| | | | | | | | | | The KVM and Xen hypervisors for the Cortex-A15 virtualization implementation need to be entered in HYP mode. Should the primary board firmware already enter HYP mode (Calxeda firmware does that), we should not deliberately drop back to SVC mode. Since U-boot does not use the MMU, running in HYP mode is just fine. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
* ARM: fix CONFIG_SPL_MAX_SIZE semanticsAlbert ARIBAUD2013-04-14-15/+13
| | | | | | | | | | | | | | | | | | | | Remove SPL-related ASSERT() in arch/arm/cpu/u-boot.lds as this file is never used for SPL builds. Rewrite the ASSERT() in arch/arm/cpu/u-boot-spl.lds to separately test image (text,data,rodata...) size, BSS size, and full footprint each against its own max, and make Tegra boards check full footprint. Also, output section mmutable is not used in SPL builds. Remove it. Finally, update README regarding the (now homogeneous) semantics of CONFIG_SPL_[BSS_]MAX_SIZE and add the new CONFIG_SPL_MAX_FOOTPRINT macro. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* ARM: Fix __bss_start and __bss_end in linker scriptsAlbert ARIBAUD2013-04-13-8/+20
| | | | | | | | | | | | | | Commit 3ebd1cbc introduced compiler-generated __bss_start and __bss_end__ and commit c23561e7 rewrote all __bss_end__ as __bss_end. Their merge caused silent and harmless but potentially bug-inducing clashes between compiler- and linker- generated __bss_end symbols. Make __bss_end and __bss_start compiler-only, and create __bss_base and __bss_limit for linker-only use. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* BUGFIX: arm: data abort in get_bad_stack_swiTetsuyuki Kobayashi2013-04-13-4/+9
| | | | | | | | | | | | | When swi instruction is executed, it is expected to get message "software interrupt" in console and dump registers and reboot, as do_software_interrupt() in arch/arm/lib/interrupts.c. But, actually it causes data abort accessing wrong address in get_bad_stack_swi macro in arch/arm/cpu/v7/start.S. This patch fixes this problem. The same mistake in arch/arm/cpu/{arm1136,arm1176,pxa}/start.S. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
* Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-13-2/+2
|\
| * omap3: Display MHz instead of mHz on the consoleman.huber@arcor.de2013-04-12-2/+2
| | | | | | | | | | | | The processor is hopefully running with M(ega)Hz and not with m(illi)Hz. Signed-off-by: Manfred Huber <man.huber@arcor.de>
* | Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-12-674/+18
|\ \ | |/ |/| | | | | Conflicts: drivers/video/exynos_fb.c
| * Consolidate bool typeYork Sun2013-04-01-21/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | 'bool' is defined in random places. This patch consolidates them into a single header file include/linux/types.h, using stdbool.h introduced in C99. All other #define, typedef and enum are removed. They are all consistent with true = 1, false = 0. Replace FALSE, False with false. Replace TRUE, True with true. Skip *.py, *.php, lib/* files. Signed-off-by: York Sun <yorksun@freescale.com>
| * Merge branch 'for-v2013.04'Anatolij Gustschin2013-03-29-653/+0
| |\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/video/Makefile Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * lcd, pxafb: move the pxafb to drivers/videoJeroen Hofstee2013-03-21-651/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the lcd code was compiled unconditionally for pxa also add CONFIG_PXA_LCD to the boards using this framebuffer. Since driver/video contains video and lcd drivers, add lcd to the name to make clear it belongs to common/lcd.c. cc: Anatolij Gustschin <agust@denx.de> cc: Cliff Brake <cliff.brake@gmail.com> cc: Marek Vasut <marek.vasut@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
| | * common/lcd.c: cleanup use of global variablesWolfgang Denk2013-03-21-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lcd_color_fg and lcd_color_bg had to be declared in board specific code, but were not actually used there; in addition, we have getter / setter functions for these, which were not used either. Get rid of the global variables, and use the getter function where needed (so far no setter calls are needed). Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Anatolij Gustschin <agust@denx.de> Cc: Bo Shen <voice.shen@atmel.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Simon Glass <sjg@chromium.org> Cc: Stelian Pop <stelian@popies.net> Cc: Tom Warren <twarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Jeroen Hofstee <jeroen@myspectrum.nl> [agust: also fixed cm_t35 board while rebasing] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-12-11/+12
|\ \ \
| * | | omap5912-osk: Fix get_timer() and CONFIG_SYS_HZJon Hunter2013-04-10-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The function get_timer() should return time in ms and CONFIG_SYS_HZ should be set to 1000 by default. Fix both of these items. Signed-off-by: Jon Hunter <jon-hunter@ti.com>
| * | | OMAP4: Fix bug in omap4460_volts structLubomir Popov2013-04-10-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The omap4460_volts struct was incorrectly referencing tps62361 instead of twl6030 as PMIC for the core and mm voltages (the tps is used for mpu supply only). This shall lead to bad OPP settings while booting kernel. Fixing it. Fix some comments as well. Signed-off-by: Lubomir Popov <lpopov@mm-sol.com>
* | | | arm: Make all linker scripts compatible with per-symbol sectionsBenoît Thébaudeau2013-04-12-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let all ARM linker scripts handle properly -ffunction-sections and -fdata-sections. This will be useful for future changes in order to create symbol-specific sections in common .S files. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | arm1176: Remove unused MMU setup from start.SBenoît Thébaudeau2013-04-12-90/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following the removal of the smdk6400 board, the MMU setup code in arm1176/start.S becomes unused, so remove it. It will still be possible to restore it later from the Git history if necessary, in which case it should be moved out of the relocate_code() function. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | arm: Remove deprecated and now unused NAND SPLBenoît Thébaudeau2013-04-12-8/+4
| | | | | | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | arm: Remove support for unused s3c64xxBenoît Thébaudeau2013-04-12-584/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following the removal of the smdk6400 board, the s3c64xx SoC becomes unused, so remove associated code. It will still be possible to restore it later from the Git history if necessary. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | arm: Remove unused relocate_code() parametersBenoît Thébaudeau2013-04-12-52/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e05e5de7fae5bec79617e113916dac6631251156 made the 2 1st parameters of ARM's relocate_code() useless since it moved the code handling them to crt0.S. So, drop these parameters. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | arm926ejs: Remove deprecated and now unused NAND SPLBenoît Thébaudeau2013-04-12-10/+0
| | | | | | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | nand: mxc: Switch NAND SPL to generic SPLBenoît Thébaudeau2013-04-12-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This also fixes support for mx31pdk and tx25, which had been broken by commit e05e5de7fae5bec79617e113916dac6631251156. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Acked-by: Scott Wood <scottwood@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
* | | | imx: Fix automatic make targets for imx imagesBenoît Thébaudeau2013-04-12-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Automatically build the 'u-boot.imx' (i.e. imx header + u-boot.bin) and 'SPL' (i.e. imx header + u-boot-spl.bin) make targets for all imx processors supporting this header, so for arm926ejs, arm1136 and armv7. Some combinations were missing. At the same time, fix the build of SPL targets not supporting the imx header on arm1136. For arm1136, the 'SPL' make target was forced to build in all cases if CONFIG_SPL_BUILD was defined, even for non-imx platforms or imx setups without an imx header. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | arm: relocate_code(): Use __image_copy_end for end of relocationBenoît Thébaudeau2013-04-12-15/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use __image_copy_end instead of __bss_start for the end of the image to relocate. This is the same as commit 033ca72, but applied to all ARM start.S. This is a more appropriate symbol naming for an image copy & relocate feature, and this also saves a useless copy of data put between __image_copy_end and __bss_start in linker scripts (e.g. relocation information, or MMU initialization tables used only before jumping to the relocated image). Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | arm: relocate_code(): Remove useless relocation offset computationBenoît Thébaudeau2013-04-12-66/+39
| | | | | | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | arm1136: Remove redundant relocate_code() returnBenoît Thébaudeau2013-04-12-2/+0
| | | | | | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | arm: relocate_code() is no longer noreturnBenoît Thébaudeau2013-04-12-39/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e05e5de7fae5bec79617e113916dac6631251156 made ARM's relocate_code() return to its caller, but it did not update its declaration accordingly. Fixing this function declaration fixes dropped C code following calls to relocate_code(). Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | | arm: start.S: Fix _TEXT_BASE for SPLBenoît Thébaudeau2013-04-12-4/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _TEXT_BASE must be set to CONFIG_SPL_TEXT_BASE for generic SPL, and to CONFIG_SYS_TEXT_BASE for non-SPL builds. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | | imx: mx5: lowlevel_init: Simplify codeBenoît Thébaudeau2013-04-12-6/+2
|/ / / | | | | | | | | | | | | | | | | | | Don't use several instructions to build constant values. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | | OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMCTom Rini2013-04-08-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case of booting from certain peripherals, such as UART, we must not see what the device descriptor says for RAW or FAT mode because in addition to being nonsensical, it leads to a hang. This is why we have a test currently for the boot mode being within range. The problem however is that on some platforms we get MMC2_2 as the boot mode and not the defined value for MMC2, and in others we get the value for MMC2_2. This is required to fix eMMC booting on omap5_uevm. Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC). Signed-off-by: Tom Rini <trini@ti.com>
* | | arm: omap4: Fix SDRAM AUTO DETECTIONLokesh Vutla2013-04-08-15/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "8602114 omap: emif: configure emif only when required" breaks SDRAM_AUTO_DETECTION. The issue is dmm_init() depends on emif_sizes[](SDRAM Auto detection) done in do_sdram_init(). The above commit moves dmm_init() above do_sdram_init() because of which dmm_init() uses uninitialized emif_sizes[]. So instead of using global emif_sizes[], get sdram details locally and calculate emif sizes. Reported-by: Michael Cashwell <mboards@prograde.net> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | OMAP: Fix copy-paste bug that did not enable UART4 clockLubomir Popov2013-04-08-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | V2 fixes line wrap issue of the patch itself. UART3 was enabled twice instead of UART4. One more cosmetic change in a comment on EMIF clock. Signed-off-by: Lubomir Popov <lpopov@mm-sol.com> Reviewed-by: R Sricharan <r.sricharan@ti.com>
* | | omap2420-h4: Fix get_timer() and CONFIG_SYS_HZHunter, Jon2013-04-08-2/+6
| | | | | | | | | | | | | | | | | | | | | The function get_timer() should return time in ms and CONFIG_SYS_HZ should be set to 1000 by default. Fix both of these items. Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* | | omap_gpmc: change nandecc commandAndreas Bießmann2013-04-08-8/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With uppcoming BCH support on OMAP devices we need to decide between differnt algorithms when switching the ECC engine. Currently we support 1-bit hammign and 8-bit BCH on HW backend. In order to switch between differnet ECC algorithms we need to change the interface of omap_nand_switch_ecc() also. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Tom Rini <trini@ti.com> Cc: Thomas Weber <thomas.weber.linux@googlemail.com>
generated by cgit v1.1 at 2024-09-14 08:52:12 +0000