summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/u-boot.lds
Commit message (Collapse)AuthorAgeLines
* ARM: create .secure_stack section only for PSCIMasahiro Yamada2016-10-14-2/+5
| | | | | | | | | | | | | | | Jon Master reports that QEMU refuses to load a U-Boot image built with CONFIG_ARMV7_NONSEC, but without CONFIG_ARMV7_PSCI since commit 5a3aae68c74e ("ARM: armv7: guard memory reserve for PSCI with #ifdef CONFIG_ARMV7_PSCI"). It looks like only PSCI that needs the Secure stack, so move the #ifdef to guard the whole of .secure_stack allocation in order not to create the empty section. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reported-by: Jon Masters <jcm@redhat.com> Link: http://patchwork.ozlabs.org/patch/664025/
* ARM: armv7: guard memory reserve for PSCI with #ifdef CONFIG_ARMV7_PSCIMasahiro Yamada2016-09-07-2/+2
| | | | | | | | If CONFIG_ARMV7_NONSEC is enabled, the linker script requires CONFIG_ARMV7_PSCI_NR_CPUS regardless of CONFIG_ARMV7_PSCI. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: Add secure section for initialized dataChen-Yu Tsai2016-07-15-2/+7
| | | | | | | | The secure monitor may need to store global or static values within the secure section of memory, such as target PC or CPU power status. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: Add CONFIG_ARMV7_SECURE_MAX_SIZE and check size of secure sectionChen-Yu Tsai2016-07-15-0/+11
| | | | | | | | | | | | As the PSCI implementation grows, we might exceed the size of the secure memory that holds the firmware. Add a configurable CONFIG_ARMV7_SECURE_MAX_SIZE so platforms can define how much secure memory is available. The linker then checks the size of the whole secure section against this. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: Add an empty secure stack sectionChen-Yu Tsai2016-07-15-9/+23
| | | | | | | | | | | | | | | | | | | | | | | | Until now we've been using memory beyond psci_text_end as stack space for the secure monitor or PSCI implementation, even if space was not allocated for it. This was partially fixed in ("ARM: allocate extra space for PSCI stack in secure section during link phase"). However, calculating stack space from psci_text_end in one place, while allocating the space in another is error prone. This patch adds a separate empty secure stack section, with space for CONFIG_ARMV7_PSCI_NR_CPUS stacks, each 1 KB. There's also __secure_stack_start and __secure_stack_end symbols. The linker script handles calculating the correct VMAs for the stack section. For platforms that relocate/copy the secure monitor before using it, the space is not allocated in the executable, saving space. For platforms that do not define CONFIG_ARMV7_PSCI_NR_CPUS, a whole page of stack space for 4 CPUs is allocated, matching the previous behavior. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: Page align secure section only when it is executed in situChen-Yu Tsai2016-07-15-5/+9
| | | | | | | | | | | | | | | | | | | Targets that define CONFIG_ARMV7_SECURE_BASE will copy the secure section to another address before execution. Since the secure section in the u-boot image is only storage, there's no reason to page align it and increase the binary image size. Page align the secure section only when CONFIG_ARMV7_SECURE_BASE is not defined. And instead of just aligning the __secure_start symbol, align the whole .__secure_start section. This also makes the section empty, so we need to add KEEP() to the input entry to prevent the section from being garbage collected. Also use ld constant "COMMONPAGESIZE" instead of hardcoded page size. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: allocate extra space for PSCI stack in secure section during link phaseChen-Yu Tsai2016-06-20-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | The PSCI implementation expects at most 2 pages worth of space reserved at the end of the secure section for its stacks. If PSCI is relocated to secure SRAM, then everything is fine. If no secure SRAM is available, and PSCI remains in main memory, the reserved memory space doesn't cover the space used by the stack. If one accesses PSCI after Linux has fully booted, the memory that should have been reserved for the PSCI stacks may have been used by the kernel or userspace, and would be corrupted. Observed after effects include the system hanging or telinit core dumping when trying to reboot. It seems the init process gets hit the most on my test bed. This fix allocates the space used by the PSCI stacks in the secure section by skipping pages in the linker script, but only when there is no secure SRAM, to avoid bloating the binary. This fix is only a stop gap. It would be better to rework the stack allocation mechanism, maybe with proper usage of CONFIG_ macros and an explicit symbol. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* arm: x86: Drop command-line code when CONFIG_CMDLINE is disabledSimon Glass2016-03-22-0/+3
| | | | | | | | Update the link script to drop this code when not needed. This is only done for two architectures at present. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* efi_loader: Add runtime servicesAlexander Graf2016-03-15-0/+30
| | | | | | | | | | | | | | | | | After booting has finished, EFI allows firmware to still interact with the OS using the "runtime services". These callbacks live in a separate address space, since they are available long after U-Boot has been overwritten by the OS. This patch adds enough framework for arbitrary code inside of U-Boot to become a runtime service with the right section attributes set. For now, we don't make use of it yet though. We could maybe in the future map U-boot environment variables to EFI variables here. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* ARM: Disable "DISCARD" for secure section if CONFIG_ARMV7_SECURE_BASE isn't ↵Wang Dongsheng2016-01-31-13/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | defined "DISCARD" will remove ._secure.text relocate, but PSCI framework has already used some absolute address those need to relocate. Use readelf -t -r u-boot show us: .__secure_start addr: 601408e4 .__secure_end addr: 60141460 60141140 00000017 R_ARM_RELATIVE 46 _secure_monitor: 47 #ifdef CONFIG_ARMV7_PSCI 48 ldr r5, =_psci_vectors 60141194 00000017 R_ARM_RELATIVE 6014119c 00000017 R_ARM_RELATIVE 601411a4 00000017 R_ARM_RELATIVE 601411ac 00000017 R_ARM_RELATIVE 64 _psci_table: 66 .word psci_cpu_suspend ... 72 .word psci_migrate 60141344 00000017 R_ARM_RELATIVE 6014145c 00000017 R_ARM_RELATIVE 202 ldr r5, =psci_text_end Solutions: 1. Change absolute address to RelAdr. Based on LDR (immediate, ARM), we only have 4K offset to jump. Now PSCI code size is close to 4K size that is LDR limit jump size, so even if the LDR is based on the current instruction address, there is also have a risk for RelAdr. If we use two jump steps I think we can fix this issue, but looks too hack, so give up this way. 2. Enable "DISCARD" only for CONFIG_ARMV7_SECURE_BASE has defined. If CONFIG_ARMV7_SECURE_BASE is defined in platform, all of secure will in the BASE address that is absolute. Signed-off-by: Wang Dongsheng <dongsheng.wang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: discard relocation entries for secure textPeng Fan2015-11-12-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code such as PSCI in section named secure is bundled with u-boot image, and when bootm, the code will be copied to their runtime address same to compliation/linking address - CONFIG_ARMV7_SECURE_BASE. When compile the PSCI code and link it into the u-boot image, there will be relocation entries in .rel.dyn section for PSCI. Actually, we do not needs these relocation entries. If still keep the relocation entries in .rel.dyn section, r0 at line 103 and 106 in arch/arm/lib/relocate.S may be an invalid address which may not support read/write for one SoC. 102 /* relative fix: increase location by offset */ 103 add r0, r0, r4 104 ldr r1, [r0] 105 add r1, r1, r4 106 str r1, [r0] So discard them to avoid touching the relocation entry in arch/arm/lib/relocate.S. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Tom Warren <twarren@nvidia.com> Cc: York Sun <yorksun@freescale.com> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditionsJan Kiszka2015-05-13-1/+1
| | | | | | | | | | | | | | CONFIG_ARMV7_VIRT depends on CONFIG_ARMV7_NONSEC, thus doesn't need to be taken into account additionally. CONFIG_ARMV7_PSCI is only set on boards that support CONFIG_ARMV7_NONSEC, and it only works on those. CC: Tang Yuantian <Yuantian.Tang@freescale.com> CC: York Sun <yorksun@freescale.com> CC: Steve Rae <srae@broadcom.com> CC: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: HYP/non-sec: add separate section for secure codeMarc Zyngier2014-07-28-0/+30
| | | | | | | | | | | In anticipation of refactoring the HYP/non-secure code to run from secure RAM, add a new linker section that will contain that code. Nothing is using it just yet. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* arm: move exception handling out of start.S filesAlbert ARIBAUD2014-05-15-0/+1
| | | | | | | | Exception handling is basically identical for all ARM targets. Factorize it out of the various start.S files and into a single vectors.S file, and adjust linker scripts accordingly. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* arm: Handle .gnu.hash section in ldscriptsAndreas Färber2014-04-07-0/+1
| | | | | | | | | | Avoids "could not find output section .gnu.hash" ld.bfd errors on openSUSE. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* arm: make _end compiler-generatedAlbert ARIBAUD2014-02-26-2/+7
| | | | | | | | | This prevents references to _end from generating absolute relocation records. This change is binary invariant for ARM targets. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* arm: put .hash, .got.plt and .machine_param back in binariesAlbert ARIBAUD2014-01-14-2/+1
| | | | | | | | | | | Some targets will build fine but not boot if sections .hash and .got.plt are not present in the binary. Add them back. Also, Exynos machines require .machine_param section in SPL. Add it. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
* arm: keep all sections in ELF fileAlbert ARIBAUD2013-12-07-8/+10
| | | | | | | | | | Current LDS files /DISCARD/ a lot of sections when linking ELF files, causing diagnostic tools such as readelf or objdump to produce partial output. Keep all section at link stage, filter only at objcopy time so that .bin remains minimal. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* arm: lds: Remove libgcc eabi exception handling tablesMichal Simek2013-09-05-0/+2
| | | | | | | | | Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-17/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* arm: make __rel_dyn_{start, end} compiler-generatedAlbert ARIBAUD2013-06-21-2/+10
| | | | | | | | | | | | | | | This change is only done where needed: some linker scripts may contain relocation symbols yet remain unchanged. __rel_dyn_start and __rel_dyn_end each requires its own output section; putting them in relocation sections changes their flags and breaks relocation. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Lubomir Popov <lpopov@mm-sol.com> Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* arm: make __image_copy_{start, end} compiler-generatedAlbert ARIBAUD2013-06-21-2/+5
| | | | | | | | | | | | | | | This change is only done where needed: some linker scripts may contain __image_copy_{start,end} yet remain unchanged. Also, __image_copy_end needs its own section; putting it in relocation sections changes their flags and makes relocation break. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Lubomir Popov <lpopov@mm-sol.com> Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* remove all references to .dynsymAlbert ARIBAUD2013-06-21-5/+1
| | | | | | | | | | | | | | | | Discard all .dynsym sections from linker scripts Remove all __dynsym_start definitions from linker scripts Remove all __dynsym_start references from the codebase Note: this touches include/asm-generic/sections.h, which is not ARM-specific, but actual uses of __dynsym_start are only in ARM, so this patch can safely go through the ARM repository. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Lubomir Popov <lpopov@mm-sol.com> Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* ARM: fix CONFIG_SPL_MAX_SIZE semanticsAlbert ARIBAUD2013-04-14-4/+0
| | | | | | | | | | | | | | | | | | | | Remove SPL-related ASSERT() in arch/arm/cpu/u-boot.lds as this file is never used for SPL builds. Rewrite the ASSERT() in arch/arm/cpu/u-boot-spl.lds to separately test image (text,data,rodata...) size, BSS size, and full footprint each against its own max, and make Tegra boards check full footprint. Also, output section mmutable is not used in SPL builds. Remove it. Finally, update README regarding the (now homogeneous) semantics of CONFIG_SPL_[BSS_]MAX_SIZE and add the new CONFIG_SPL_MAX_FOOTPRINT macro. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* ARM: Fix __bss_start and __bss_end in linker scriptsAlbert ARIBAUD2013-04-13-4/+10
| | | | | | | | | | | | | | Commit 3ebd1cbc introduced compiler-generated __bss_start and __bss_end__ and commit c23561e7 rewrote all __bss_end__ as __bss_end. Their merge caused silent and harmless but potentially bug-inducing clashes between compiler- and linker- generated __bss_end symbols. Make __bss_end and __bss_start compiler-only, and create __bss_base and __bss_limit for linker-only use. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-03-18-4/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Albert's rework of the linker scripts conflicted with Simon's making everyone use __bss_end. We also had a minor conflict over README.scrapyard being added to in mainline and enhanced in u-boot-arm/master with proper formatting. Conflicts: arch/arm/cpu/ixp/u-boot.lds arch/arm/cpu/u-boot.lds arch/arm/lib/Makefile board/actux1/u-boot.lds board/actux2/u-boot.lds board/actux3/u-boot.lds board/dvlhost/u-boot.lds board/freescale/mx31ads/u-boot.lds doc/README.scrapyard include/configs/tegra-common.h Build tested for all of ARM and run-time tested on am335x_evm. Signed-off-by: Tom Rini <trini@ti.com>
| * Refactor linker-generated arraysAlbert ARIBAUD2013-03-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type R_ARM_ABS32 to become R_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after. Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC. Conflicts: arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds arch/arm/cpu/armv7/omap-common/u-boot-spl.lds board/ait/cam_enc_4xx/u-boot-spl.lds board/davinci/da8xxevm/u-boot-spl-da850evm.lds board/davinci/da8xxevm/u-boot-spl-hawk.lds board/vpac270/u-boot-spl.lds Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
| * arm: make __bss_start and __bss_end__ compiler-generatedAlbert ARIBAUD2013-03-12-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | Turn __bss_start and __bss_end__ from linker-generated to compiler-generated symbols, causing relocations for these symbols to change type, from R_ARM_ABS32 to R_ARM_RELATIVE. This should have no functional impact, as it affects references to __bss_start and __bss_end__ only before relocation, and no such references are done. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | Replace __bss_end__ with __bss_endSimon Glass2013-03-15-2/+2
|/ | | | | | | | | | | | | Note this is a tree-wide change affecting multiple architectures. At present we use __bss_start, but mostly __bss_end__. This seems inconsistent and in a number of places __bss_end is used instead. Change to use __bss_end for the BSS end symbol throughout U-Boot. This makes it possible to use the asm-generic/sections.h file on all archs. Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM: enhance u-boot.lds to detect over-sized SPLStephen Warren2012-10-29-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Add an ASSERT() to u-boot.lds to detect an SPL that doesn't fit within SPL_TEXT_BASE..SPL_MAX_SIZE. Different .lds files implement this check in two possible ways: 1) An ASSERT() like this 2) Defining a MEMORY region of size SPL_MAX_SIZE, and re-directing all linker output into that region. Since u-boot.lds is used for both SPL and main U-Boot, this would entail only sometimes defining a MEMORY region, and only sometimes performing that redirection, and hence option (1) was deemed much simpler, and hence implemented. Note that this causes build failures at least for NVIDIA Tegra Seaboard and Ventana. However, these are legitimate; the SPL doesn't fit within the required space, and this does cause runtime issues. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Allen Martin <amartin@nvidia.com> Acked-by: Tom Rini <trini@ti.com> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: fix u-boot.lds for -ffunction-sections/-fdata-sectionsStephen Warren2012-10-26-4/+4
| | | | | | | | | | | | | | When -ffunction-sections or -fdata-section are used, symbols are placed into sections such as .data.eserial1_device and .bss.serial_current. Update the linker script to explicitly include these. Without this change (at least with my gcc-4.5.3 built using crosstool-ng), I see that the sections do end up being included, but __bss_end__ gets set to the same value as __bss_start. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Allen Martin <amartin@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* common: Discard the __u_boot_cmd sectionMarek Vasut2012-10-22-3/+0
| | | | | | | | | | | The command declaration now uses the new LG-array method to generate list of commands. Thus the __u_boot_cmd section is now superseded and redundant and therefore can be removed. Also, remove externed symbols associated with this section from include/command.h . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
* common: Add .u_boot_list into all linker filesMarek Vasut2012-10-22-0/+5
| | | | | | | | | | Add section for the linker-generated lists into all possible linker files, so that everyone can easily use these lists. This is mostly a mechanical adjustment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
* arm: add a common .lds link scriptSimon Glass2012-03-30-0/+94
Most ARM CPUs use a very similar link script. This adds a basic script that can be used by most CPUs. Two new symbols are introduced which are intended to eventually be defined on all architectures to make things easier for generic relocation and reduce special-case code for each architecture: __image_copy_start is the start of the text area (equivalent to the existing _start on ARM). It marks the start of the region which must be copied to a new location during relocation. This symbol is called __text_start on x86 and microblaze. __image_copy_end is the end of the region which must be copied to a new location during relocation. It is normally equal to the start of the BSS region, but this can vary in some cases (SPL?). Making this an explicit symbol on its own removes any ambiguity and permits common code to always do the right thing. This new script makes use of CPUDIR, now defined by both Makefile and spl/Makefile, to find the directory containing the start.o object file, which is always placed first in the image. To permit MMU setup prior to relocation (as used by pxa) we add an area to the link script which contains space for this. This is taken from commit 7f4cfcf. CPUs can put the contents in there using their start.S file. BTW, shouldn't that area be 16KB-aligned? Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-01 11:30:56 +0000