summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/tegra30-common
Commit message (Collapse)AuthorAgeLines
* ARM: tegra: Tegra30 pinmux cleanupStephen Warren2014-04-17-287/+275
| | | | | | | | | | | | | | | | | | | | | | This renames all the pinmux pins, drive groups, and functions so they have a prefix which matches the type name. These lists are also auto- generated using scripts that were also used to generate the kernel pinctrl drivers. This ensures that the lists are consistent between the two. The entries in tegra30_pingroups[] are all updated to remove the columns which are no longer used. All affected code is updated to match. This introduces a few changes to pin/group/function naming and the set of available functions for each pin. The new values now exactly match the TRM; the chip documentation. I adjusted one entry in pinmux-config-cardhu.h due to this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pinmux naming consistency fixesStephen Warren2014-04-17-2/+2
| | | | | | | | | | | | | | | Clean up the naming of pinmux-related objects: * Refer to drive groups rather than pad groups to match the Linux kernel. * Ensure all pinmux API types are prefixed with pmux_, values (defines) are prefixed with PMUX_, and functions prefixed with pinmux_. * Modify a few type names to make their content clearer. * Minimal changes to SoC-specific .h/.c files are made so the code still compiles. A separate per-SoC change will be made immediately following, in order to keep individual patch size down. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pinctrl: remove duplicationStephen Warren2014-04-17-397/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Much of arch/arm/cpu/tegra*-common/pinmux.c is identical. Remove the duplication by creating pinmux-common.c for all the identical code. This leaves: * arch/arm/include/asm/arch-tegra*/pinmux.h defining only the names of the various pins/pin groups, drive groups, and mux functions. * arch/arm/cpu/tegra*-common/pinmux.c containing only the lookup table stating which pin groups support which mux functions. The code in pinmux-common.c is semantically identical to that in the various original pinmux.c, but had some consistency and cleanup fixes applied during migration. I removed the definition of struct pmux_tri_ctlr, since this is different between SoCs (especially Tegra20 vs all others), and it's much simpler to deal with this via the new REG/MUX_REG/... defines. spl.c, warmboot.c, and warmboot_avp.c needed updates due to this, since they previously hijacked this struct to encode the location of some non-pinmux registers. Now, that code simply calculates these register addresses directly using simple and obvious math. I like this method better irrespective of the pinmux code cleanup anyway. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pinctrl: remove vddioStephen Warren2014-04-17-2/+0
| | | | | | | | | | This field isn't used anywhere, so remove it. Note that PIN() macros are left unchanged for now, to avoid many diffs to them; later commits will completely rewrite them just one time. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: pinctrl: remove func_safeStephen Warren2014-04-17-6/+0
| | | | | | | | | | This field isn't used anywhere, so remove it. Note that PIN() macros are left unchanged for now, to avoid many diffs to them; later commits will completely rewrite them just one time. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: don't exceed AVP limits when configuring PLLPJimmy Zhang2014-02-03-29/+2
| | | | | | | | | | | | | | | | | | | | | | | | Based on the Tegra TRM, the system clock (which is the AVP clock) can run up to 275MHz. On power on, the default sytem clock source is set to PLLP_OUT0. In function clock_early_init(), PLLP_OUT0 will be set to 408MHz which is beyond system clock's upper limit. The fix is to set the system clock to CLK_M before initializing PLLP, and then switch back to PLLP_OUT4, which has an appropriate divider configured, after PLLP has been configured Implement this logic in new function tegra30_set_up_pllp(), which sets up PLLP and all PLLP_OUT* dividers, and handles the AVP clock switching. Remove the duplicate PLLP setup from pllx_set_rate() and adjust_pllp_out_freqs(). Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> [swarren, significantly refactored the change] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: rename MASK_BITS_29_28 to MASK_BITS_31_28Stephen Warren2014-02-03-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The only place where the MASK_BITS_* values are used is in adjust_periph_pll(), which interprets the value 4 (old MASK_BITS_29_28, new MASK_BITS_31_28) as being associated with mask OUT_CLK_SOURCE4_MASK, i.e. bits 31:28. Rename the MASK_BITS_ macro to reflect how it's actually implemented. Note that no Tegra clock register actually uses all of bits 31:28 as the mux field. Rather, bits 30:28, 29:28, or 28 are used. However, in those cases, nothing is stored in the bits above the mux field, so it's safe to pretend that the mux field extends all the way to the end of the register. As such, the U-Boot clock driver is currently a bit lazy, and doesn't distinguish between 31:28, 30:28, 29:28 and 28; it just lumps them all together and pretends they're all 31:28. This patch doesn't cause this issue; it was pre-existing. Hopefully, future patches will clean this up. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: deduplicate MASK_BITS_xxx clock mux enumTom Warren2014-02-03-6/+0
| | | | | | | | | | | | | | | The enum used to define the set of register bits used to represent a clock's input mux, MUX_BITS_*, is defined separately for each SoC at present. Move this definition to a common location to ease fixing up some issues with the definition, and the code that uses it. Signed-off-by: Tom Warren <twarren@nvidia.com> [swarren, extracted from a larger patch by Tom] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: convert makefiles to Kbuild styleMasahiro Yamada2013-10-31-25/+1
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Tegra114: Initialize System Counter (TSC) with osc frequencyTom Warren2013-04-15-0/+4
| | | | | | | | | T114 needs the SYSCTR0 counter initialized so the TSC can be read by the kernel. Do it in the bootloader since it's a write-once deal (secure/non-secure mode dependent). Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* Tegra30: Cardhu: Add pad config tables/code based on pinmux codeTom Warren2013-03-14-1/+189
| | | | | | | | | | | | | | | | Pad config registers exist in APB_MISC_GP space, and control slew rate, drive strengh, schmidt, high-speed, and low-power modes for all of the pingroups in Tegra30. This builds off of the pinmux way of constructing init tables to configure select pads (SDIOCFG, for instance) during pinmux_init(). Currently, only SDIO1CFG is changed as per the TRM to work with the SD-card slot on Cardhu. Thanks to StephenW for the suggestion/original idea. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* tegra30: add SBC1 to periph id mapping tableAllen Martin2013-02-11-1/+1
| | | | | | | | SBC1 is SPI controller 1 on tegra30 Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra: Move common clock code to arch/arm/cpu/tegra-common/clock.cTom Warren2013-02-11-598/+114
| | | | | | | | | This 'commonizes' much of the clock/pll code. SoC-dependent code and tables are left in arch/cpu/tegraXXX-common/clock.c Some T30 tables needed whitespace fixes due to checkpatch complaints. Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra30: clocks: Fix clock tables for I2C and other periphsTom Warren2013-01-16-34/+44
| | | | | | | Add 16-bit divider support (I2C) to periph table, annotate and correct some entries, and fix clk_id lookup function. Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra30: Add common CPU (shared) filesTom Warren2013-01-16-0/+1699
These files are used by both SPL and main U-Boot. Also made minor changes to shared Tegra code to support T30 differences. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>